Differences between Contract Cumulative Value an Release Orderes Value

Hi All
I have found differences in: EKPO (PO Items) and EKAB (Release Orders) tables vs. Cumulative Target Contract value.
The total amount in EKPO net values is grather than Cumulative Target Value in Contract, in EKAB net values as well.
Do you know the considerations that the system are taking?....because the Cumulative value must not be exceeded
Thanks for your tiime.
Regards
Mauricio

I have found the issue, the delivery complete indicator restore the Cumulative Amount in Value Contracts (Quantity = 0). After that, a new PO could be created with Agreement link limited for the amount restored.
So the all PO generated related with the contract could exceed the Cumulative Amount established in contract
Thatu2019s a problem because All PO could be received even though the delivery complete was activated
This behavior is only for Value Contracts
Saludos
Mauricio

Similar Messages

Rem order plan value exist for difference between PO & GR value

Dear Experts ,
In PS report S_ALR_87013558 it is found that the difference between Service PO & GR value is reflecting in Rem. Order plan.
against the WBS.
According to my understanding the difference between Material PO value & GR value reflects as outstanding commitment. Hence I assume that the same should happen in case of Service procurement also.
Kindly let me know whether the reporting is correct or not.
If the reporting is incorrect, then what could be the reason for the same and how this problem can be tackled.
Regards,
Vishal

Hi
Check if you have ticked remaining order plan value updation under costing in customization (both check boxes). If those are checked your plan value becomes assigned values always and if there is any residue it will be there under plan value.
Also note that for service PO, once all entry sheets are posted, for final entry sheet user should click FINAL ENTRY in SES. It will remove any residual commitment.

Difference between business process, sales process and order process

what is the difference between business process, sales process and order process?

Dear Gopala,
business process is a general definition of the process which you have:
for example, you get an order, you have no goods, but you can produce them, you start an assambly processing, the production order will be created, then the goods will be prepatred, then the delivery will be created, the goods issue booked then your customer gets thwe goods and send the delivery confirmation, you create an invoice etc.etc.
sales process is a part of a business process.
Sales process shows how you sell the goods, there are different sales document categories to do this: sales orders, contracts, scheduling agreements etc.
order process is only one of possibilities of the sales process.
Order process is used if you get really a one-time (or at lease not on a regular basis many times) the simple orders where your customer says what goods he would like to receive and when. Then you create a sales order (in dialog transaction VA01) and can create a delivery. There are different types of sales orders in the standard. The customizing of sales order types is available under the transaction VOV8.
I hope, this info help you a little bit further to understand SD design.
Kind regards,
Akmal Vakhidov
Development Support SD, SAP

SSRS expression for difference between two currency values

Hi All;
I need to get the difference between two currency values
Below is my report
I need to get differene between Actual Income and Profile Income and this value should be in "£" In this example it should be £0.00
Any help much appreciated
Thanks
Pradnya07

=sum(Fields!ProfileIncome.Value - Fields!ActualIncome.Value)
This could have either field first, but depends on which field is expected to be larger. You would then format the textbox to show in pounds.
HTH

Cost difference between PM report MCI8 and IW38 orders cost

Hi Experts!
I have an issue of cost difference between Plant Maintenance total actual cost of orders and Cost analysis report.
Short Text
Cost difference between PM report MCI8 and IW38 orders cost
Long Text
Applied SAP notes 180047 and 112841 for the following error:
Cost is not displaying in MCI8 for every 3 months intervals.
Now this problem has been resolved but got an another error like cost
difference between MCI8 report and IW38 order costs.
Note applied method:-
1). Configured FYV as Z1 with Period update for info structures S61 to
S65, S70, S114 to S116.
2). Regenerate order cost in Tcode OLI5.
3). PMIS: Statistical setup of info structures T.Code u2013 OLPM
For Info Structures which is changed in the configuration SO61-SO65,
SO70, S114-S116.
4). Copy info structures Version &( to Active version 000 T.Code u2013 OLIX,
Select Copy version
For all info Structure SO61-SO65, SO70, S114-S116.
*Steps for Reconstruction*
New another error like cost difference between MCI8 report and IW38
order costs.
Step 1. Transaction- MCI8, Order type - CORR, Period -01.2009 to
12.2009 and execute
Step 2. Drilldown the corrective maintenance order costs into period
wise.
Step 3. Transaction- IW38, Order type Corr, Period -01.2009 to 12.2009,
Currency - EUR and execute
Cost differences: E.g. Example A)
                               MCI8                                 IW38
Total costs             8.041,69                           5.544,99
of WOs               18                                     18
So far my view is that, regardless of the selection criteria or the
output layout, predominantly the costs are different.
I would expect that they are equal. And what the right result are,..u2026Iu2019m
not sure.
Regards,
Santhamoorthy

Hello,
Sometimes this difference comes because of the selection period which we are choosing.
Try to run IW38 once with the help of Basic start and basic finish dates of the order.
And after that with the help of the period with the same dates range.
You will get the difference also.
the reason is that whenever any Posting is done in the previous month PM order the system changes the basic start date and when you select the current period and execute IW38 it shows the whole cost incurred on the order including all previous cost.
But in MCI8 it does not happen because MCI8 is run through LIS structures. And in this report only the current month cost will be shown by the system.
I hope you got the idea about differences.
Regards
Naveen

Difference between oracle application 11i and release 12

can some one give me a doccument..link..or anything related to difference between oracle application 11i and release 12 with all details technical and strucutural

Please check the following links:
Note: 404152.1 - E-Business Suite Release 12: Release Content Documents
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404152.1
what is the difference between REL 10.5.10 and REL 12
Re: what is the difference between REL 10.5.10 and REL 12

Plz tel me difference between ATO,PTO & CTO models in order management R12

plz tel me difference between ATO,PTO & CTO models in order management R12

Hi
here you can find a short explanation
http://applearn.blogspot.com/search/label/Oracle%20Fundamentals

Difference between binding and value

Hi
I am new to JSF
Can you tell me what is the difference between binding and value attribute of a
JSF component ?
Many thanks.

Hi,
the binding is the component association to a managed bean (or backing bean). This allows you to manipulate the component in Java code stored in a managed bean.
The value is what the actual component value is.
Frank

Difference between varient configuration and make to order

hi friends please tell me what is the difference between variant configuration and make to order
regards
santosh

Hi Santosh,
[Variant Configuration|http://help.sap.com/saphelp_erp2004/helpdata/en/d8/fa9bd49ede11d1903b0000e8a49aad/content.htm]
[Sales Order Management Make-to-order|http://www50.sap.com/businessmaps/092BF1DFEEB2456DADD0DD0284EBE8A2.htm]
Assign Points if helpful.
Thanks and Regards,
Naveen Dasari.

Difference between contract creation and project creation

I am new to Oracle Projects. In Oracle Project Contracts I can see that we create a new contract. Also in Oracle Projects we can create a new Project.
Can anyone please let me know what is the difference between creating a contract and creating a project in Oracle Projects.
Can we create a project based on an already created contract?
Regards

Hi Dina,
thanks for your reply. We are currently implementing Oracle Projects in our company where our main business is construction works.
As you have said that a contract is a commercial agreement between the customer and the contractor. We get a Bill of Quantities(BOQ) along with the contract documents. In the BOQ all the different types of works for the project is defined along with the quantities which are known as BOQ Items. We have to quote our rates for the BOQ items. We generally perform an operation called Rate Analysis of these BOQ Items by assigning various quantities of resources that shall be required to execute each of the BOQ items. Thus we arrive at the cost of each BOQ items. Once the work gets executed, this BOQ happens to be the basis for invoicing or application to the client. So we create our budget based on the BOQ itself. We make our Business plan based on the items of this BOQ itself and also book the expenditure on these BOQ items.
Although we create Project plan using Primavera, there is no one-to-one correspondence between activities of the project plan and the BOQ items. So we cannot really create our budget based on the project plan.
So if we manage everything only on the basis of the BOQ items, we loose important project management related information like earned value management etc. And if we depent only on the Project plan we loose important cost related information.
So we need to plan in such a way so that both these are fused together.
Can you kindly advice me about how to proceed ahead with our implementationso that we can use Oracle Projects optimally for our business.
Thanks & Regards

Difference between Valuated and Non valuated Sale order stock

Hi All,
Can anybody tell me the difference between the above said subject with the steps involved in each scenario.
That is valuated sale order stock and Non valuated sale order stock in Product cost by Sale Order.
With Journal entries at each step and whether any WIP or variances at Production order level and sale order level and all the financial entries related to them
Thanks in Advance,
Ravi Kumar

Hi Shail,
Thans for your inputs,
But I wanted to know it in more detail. In what scenarios they are used with financial entries in both the cases.
I will give you my scenario. It goes like this,
My client is in pipe coating business, who receives pipes from customers and does only coating work(which is considered as service) and despatches it to the customer. this process is carried on the basis of work order(Sale order).
Now Production order is created and work is done on that with reference to Sale order for that particular customer.
So the pipe which my client receives should be non valuated stock as it will not be a raw material to them and the cost incurred on it is booked on production order like chemicals as raw material consumption, activity cost etc.
now in this scenario just tell me how and at which stage FI entries get generated at Production order and Sale order level, and also at wat level Standard cost estimate should be created i,e at production order level or sale order level(sale order cost estimate).
Will there be any entries at goods isssue and GR against production order. If no then how the COGM account will get hit.
Please tell me this scenario in both cases Valuated sale order stock and Non valuated sale order stock with financial entries in Sale order costing.
Thanks & Regards,
Ravi Kumar

Difference between Goods receipt based IV / Purchase order based IV ?

Hallow all !!!
Can anybody please explain the difference between GR based invoice verification and Purchase Order based invoice verification in brief ?
Thanks in advance !

Hi,
PO-based invoice verification
In PO-based invoice verification, items are settled with reference to the purchase order. Settlement can be carried out with respect to all items, irrespective of whether or not deliveries have yet been received.
GR-based invoice verification
In GR-based invoice verification you can effect settlement with regard to each GRs relating to a purchase order separately. In the PO history, each invoice item can be assigned to precisely one GRs.
for more follow the links
http://www.sap-hefte.de/download/dateien/1067/083_leseprobe.pdf
http://www.finance.utoronto.ca/fast/qrg/purch/ir/pocreate.htm
Regards,
Biju K
Edited by: Bijay Kumar Barik on Apr 16, 2008 8:41 AM
Edited by: Bijay Kumar Barik on Apr 16, 2008 2:23 PM

Difference between MMBE & MBBS report for sales order stock E

Hi,
What is the difference between MMBE & MBBE report bcoz we are getting difference in sales order stock in both reports.
Thanks in advance.
Regards
Basavraj Patil

Hi,
MBBS will give the STOCK OVERVIEW for specific sales order and specific Project
MMBE will give the stock at PLANT, STORAGE LOCATION, & At Special stock indicator level.
The sales order stocks will be same at both, You have to count the stock of sales order at all the Plants and Storage location level inorder to get the same stock of MBBS at the sales order level
Hope it is clear,
santosh

Get Date Difference between 2 date values as days

Hi,
How to get the difference between 2 dates in number of days format. Say if i need the difference between 2012-08-23 and 2012-08-20 as 3
Please help..

Hi,
You can do it in XSLT since the dates are in ISO 8601 format...
http://www.w3.org/TR/NOTE-datetime
Here is a sample XSLT...
<xsl:stylesheet version="2.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:fn="http://www.w3.org/2005/xpath-functions">
<xsl:template match="/">
<xsl:variable name="date1" select="xs:dateTime(/root/date1)"/>
<xsl:variable name="date2" select="xs:dateTime(/root/date2)"/>
<xsl:value-of select="fn:days-from-duration($date2 - $date1)"/>
</xsl:template>
</xsl:stylesheet>The above XSLT will result *4* for the following input...
<root>
<date1>2012-01-11T00:00:00.000-05:00</date1>
<date2>2012-01-15T00:00:00.000-05:00</date2>
</root>You can test this example here...
http://xslttest.appspot.com/
Hope this helps...
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Where is the difference between Positive Liste and BP Release in SPL?

Hi Folks,
Where is the difference between setting a Business Partner on a
Positive or Negative List and release or block a business partner in SPL?
I thought that should be almost the same. Hope you can clarify it.
Thanks
Regards
Dieter

Hi Dieter,
The difference is the following:
If you put a partner on a negative or positive list it no longer gets screened. so, unless you screen the positive or negative list explicitly, the partner is no longer screened, and of course the one on the positive list is never blocked and the other one always free.
If you release a Partner the Partner then the following happens (depending on the customizing).
1. If you do not have set the memory function in the customizing then the partner stays unblocked until you launch a new screening run and, if it gets hit against a list entry, it will be blocked again
2. If you do have the Memory function ticked in the customizing then the partner gets screened and released when you do a screening run (in contrary to the positive and negative list it does get screened, but automatically released). But if there is a new or changed entry that matches with the released partner, the partner gets blocked.
Regards,
Marc

Differences between Contract Cumulative Value an Release Orderes Value

Similar Messages

Maybe you are looking for