Where is the difference between Positive Liste and BP Release in SPL?

Hi Folks,
Where is the difference between setting a Business Partner on a
Positive or Negative List and release or block a business partner in SPL?
I thought that should be almost the same. Hope you can clarify it.
Thanks
Regards
Dieter

Hi Dieter,
The difference is the following:
If you put a partner on a negative or positive list it no longer gets screened. so, unless you screen the positive or negative list explicitly, the partner is no longer screened, and of course the one on the positive list is never blocked and the other one always free.
If you release a Partner the Partner then the following happens (depending on the customizing).
1. If you do not have set the memory function in the customizing then the partner stays unblocked until you launch a new screening run and, if it gets hit against a list entry, it will be blocked again
2. If you do have the Memory function ticked in the customizing then the partner gets screened and released when you do a screening run (in contrary to the positive and negative list it does get screened, but automatically released). But if there is a new or changed entry that matches with the released partner, the partner gets blocked.
Regards,
Marc

Similar Messages

  • Differences between ABAP lists and ALV lists

    what is the differences between ABAP lists and ALV lists?
    Edited by: pong pong on Apr 9, 2008 5:08 AM

    Hello Pong Pong,
    Please go thru help topics:
    ALV Grid
    http://help.sap.com/saphelp_47x200/helpdata/en/bf/3bd1369f2d280ee10000009b38f889/frameset.htm
    ABAP Lists
    http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb408a455611d189710000e8322d00/frameset.htm
    Regards,
    Siddhesh

  • Difference between source list and info records

    Dear All,
    What is the difference between Source List and Info Records?
    Thanks N Regards
    Anandasiva

    Hi,
    The source list is the list which shows the sources from which you can procure the material. If you have ticked the source list requirement in the material master, then you can procure the material only from the vendors mentioned in the source list.
    In Inf Record, you maintain the data for a material supplied by a vendor. e.g. Material price, tax code, other conditions,, buyer code, delivery & payment terms.
    Hope your requirement is fulfilled.
    Reward points if the answer is helpful.
    Regards,
    Prashant Kolhatkar

  • Difference between material listing and item proposal?

    HI Gurus,
    COuld you explain what is the difference between material listing and item proposal?
    --james

    Hi James,
    Item Proposal is automatically proposed by the system while creating a sales order for a specific customer.
    This setting is maintained in the Sales Area of customer master under Sales tab.
    It can be stored as master records. When you create a sales order, you can refer to an item proposal, look over the proposed items, and copy all or just selected items into the order. If a customer routinely orders the same goods, you can create a proposal and enter it in the customer master record. During sales order processing, the system automatically proposes items from this proposal.
    Item Proposal is created using VA51.
    Material Listing lists which materials a customer can buy. With material listing or exclusion you can control which materials can be sold to each customer.
    A material listing is created for a customer. The customer can only buy the materials contained in the list. The system does not allow any materials to be entered if they are not contained in the material listing.
    If no records exist for material listing, the sold-to party, for example, can in principle buy the same materials as the payer. However, if there is a material listing record specific to the sold-to party, the sold-to party can only buy the materials permitted in the list. These materials do not have to be identical to those which the payer can buy.
    Material listing and material exclusion are controlled using the condition technique.
    Hope it helps.
    Regards,
    Priyanka

  • What is the Difference between Price List , Modifier and Qualifier ?

    Hi All,
    What is the difference between Price List , Modifier and Qualifier ?
    What are tables affected and joins ?
    Thanks in advance

    Hi Selva,
    If you look at the parameters,you can see more options in GRID.The following are those extra options which you cannot see in LIST.
    I_CALLBACK_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_TOP_OF_PAGE = ' '
    I_CALLBACK_HTML_END_OF_LIST = ' '
    I_STRUCTURE_NAME =
    I_BACKGROUND_ID = ' '
    I_GRID_TITLE =
    I_GRID_SETTINGS =
    IT_ALV_GRAPHICS =
    IT_ADD_FIELDCAT =
    IT_HYPERLINK =
    I_HTML_HEIGHT_TOP =
    I_HTML_HEIGHT_END =
    IT_EXCEPT_QINFO =
    If the caller specifies an EXIT routine, this routine must have the following form:
    FORM top_of_page.
    Module REUSE_ALV_COMMENTARY_WRITE can then be called within the EXIT routine. This module is responsible for formatting the header information and also ensures online HTML formatting. In the print preview or in batch mode, the text passed is then output in the normal format.
    If module REUSE_ALV_COMMENTARY_WRITE cannot be used, you must use two parameters instead. In I_CALLBACK_TOP_OF_PAGE you pass the form routine that is responsible for normal formatting in batch mode or in the print preview mode. The form routine that is responsible for online formatting, is passed in parameter I_CALLBACK_HTML_TOP_OF_PAGE. If one of these parameters is not filled, top-of-page is not output in the respective mode.
    In function module documentation,if you click those parameters,you can see the explanation.
    If you need more information,get back.Otherwise,kindly close the thread by rewzarding points for useful replies.
    Mueksh Kumar

  • What's the difference between task list release for order and release for c

    What's the difference between task list release for order and release for cost?

    Pallavi,
    The status of the task list determines in which other application areas the respective task list may be used.
    Release for costing: means that the task list can be used to calculate costs in Transaction IA16 i.e. the costs for the task list operations would be calculated if released for costing status is set.
    Release for use in the order: Released for Order means that you can use the task list in an order i.e. you could include operations from a task list in an order.
    Regards,
    Usman

  • Where is the difference between MacBook Pro ME294D/A and ME294B/A  and ME294Z/A?

    Where is the difference between MacBook Pro ME294D/A and ME294B/A  and ME294Z/A?

    The country the computers originally shipped in.
    (98433)

  • The difference between FIELD-SYMBOL and normal DATA TYPE

    Dear experts,
    Please see the example below, both are output the same result.
    DATA: EXTERNAL_RECORD(4000),
          POSITION TYPE I,
          LENGTH TYPE N,
          ENTRY TYPE STRING.
    EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
    DO.
      LENGTH = EXTERNAL_RECORD+POSITION(4).
      IF LENGTH = 0.
        EXIT.
      ENDIF.
      ADD 4 TO POSITION.
      MOVE EXTERNAL_RECORD+POSITION(LENGTH) TO ENTRY.
      WRITE ENTRY.
      ADD LENGTH TO POSITION.
      IF POSITION >= 4000.
        EXIT.
      ENDIF.
    ENDDO.
    --OR It can be written as--
    DATA: EXTERNAL_RECORD(4000),
          POSITION TYPE I,
          LENGTH TYPE N.
    FIELD-SYMBOLS <ENTRY>.
    EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
    DO.
      LENGTH = EXTERNAL_RECORD+POSITION(4).
      IF LENGTH = 0.
        EXIT.
      ENDIF.
      ADD 4 TO POSITION.
      ASSIGN EXTERNAL_RECORD+POSITION(LENGTH) TO <ENTRY>.
      WRITE <ENTRY>.
      ADD LENGTH TO POSITION.
      IF POSITION >= 4000.
        EXIT.
      ENDIF.
    ENDDO.
    Is there any special circumstances we need to use FIELD-SYMBOL?
    Why is FIELD-SYMBOL is introduce in the first place?
    Kindly advice with example.
    Thanks in advance for those who can help me on this.

    HI,
    You can use field symbols to make the program more dynamic. In this example the name of a table control is substituted by a field symbol. Thus you cal call the form with any internal table, using the name of the table control as a parameter.
    Example
    form insert_row
    using p_tc_name.
    field-symbols <tc> type cxtab_control. "Table control
    assign (p_tc_name) to <tc>.
    insert 100 lines in table control
    <tc>-lines = 100.
    Field symbols allow you to:
    **     Assign an alias to a data object(for example, a shortened
            name for data objects structured through several hierarchies
            - <fs>-f instead of rec1-rec2-rec3-f)
    **     Set the offset and length for a string variably at runtime
    **     Set a pointer to a data object that you determine at runtime (dynamic ASSIGN)
    **     Adopt or change the type of a field dynamically at runtime
    **     Access components of a structure
    **     (from Release 4.5A) Point to lines of an internal table
            (process internal tables without a separate work area)
    Field symbols in ABAP are similar to pointers in other programming
    languages. However, pointers (as used in PASCAL or C) differ from ABAP
    field symbols in their reference syntax.
    The statement ASSIGN f to <fs> assigns the field f to field
    symbol <fs>. The field symbol <fs> then "points" to the
    contents of field f at runtime. This means that all changes to the
    contents of f are visible in <fs> and vice versa. You declare
    the field symbol <fs> using the statement FIELD-SYMBOLS: <fs>.
    Reference syntax
    Programming languages such as PASCAL and C use a dereferencing symbol
    to indicate the difference between a reference and the object to which
    it refers; so PASCAL would use p^ for a pointer instead of p, C would
    use *p instead of p. ABAP does not have any such dereferencing symbol.
    **     In PASCAL or C, if you assign a pointer p1 to a pointer p2,
    you force p1 to point to the object to which p2 refers (reference semantics).
    **     In ABAP, if you assign a field symbol <fs1> to a field
    symbol <fs2>, <fs1> takes the value of the data object to
    which <fs2> refers (value semantics).
    **     Field symbols in ABAP are always dereferenced, that is,
    they always access the referenced data object. If you want to
    change the reference yourself in ABAP, you can use the ASSIGN statement
    to assign field symbol <fs1> to field symbol <fs2>.
    Using field symbols
    You declare field symbols using the FIELD-SYMBOLS statement.
    They may be declared either with or without a specific type.
    At runtime you assign a field to the field symbol using the ASSIGN
    statement. All of the operations on the field symbol act on the field
    assigned to it.
    When you assign a field to an untyped field symbol, the field symbol
    adopts the type of the field. If, on the other hand, you want to assign
    a field to a typed field symbol, the type of the field and that of the
    field symbol must be compatible.
    A field symbol can point to any data object and from Release 4.5A,
    they can also point to lines of internal tables.
    The brackets (<>) are part of the syntax.
    Use the expression <fs> IS ASSIGNED to find out whether the field
    symbol <fs> is assigned to a field.
    The statement UNASSIGN <fs> sets the field symbol <fs> so
    that it points to nothing. The logical expression <fs>
    IS ASSIGNED is then false. The corresponding negative expression
    is IF NOT <fs> IS ASSIGNED.
    An unassigned field symbol <fs> behaves as a constant with
    type C(1) and initial value SPACE.
    MOVE <fs>
    TO dest     Transfers the initial value SPACE to the variable dest
    MOVE 'A' to <fs>     
    Not possible, since <fs> is a constant
    (runtime error).
    To lift a type restriction, use the CASTING addition in the
    ASSIGN statement. The data object is then interpreted as though
    it had the data type of the field symbol. You can also do this
    with untyped field symbols using the CASTING TYPE <type> addition.
    The danger with pointers is that they may point to invalid areas.
    This danger is not so acute in ABAP, because the language does not
    use address arithmetic (for example, in other languages, pointer p
    might point to address 1024. After the statement p = p + 10, it would
    point to the address 1034). However, the danger does still exist, and
    memory protection violations lead to runtime errors.
    A pointer in ABAP may not point beyond a segment boundary. ABAP does
    not have one large address space, but rather a set of segments.
    Each of the following has its own segment:
    *     All global data
    *     All local data
    *     Each table work area (TABLES)
    *     Each COMMON PART
    You should only let field symbols move within an elementary field or
    structure where ABAP allows you to assign both within the global data
    and beyond a field boundary.
    Rgds
    Umakanth

  • What's the difference between InDesign CC and InDesign CC 2014?

    Hi,
    I am in the middle of projects and I see there is a whole new release of the Adobe Cloud apps.
    What is the What's the difference between InDesign CC and InDesign CC 2014?
    Are there different features?
    Different tutorials?
    I don't want to suddenly open my files in INDD CC 2014 unless it is fairly seamless.
    Thanks for any help and advice.
    — CR

    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    -you may need to log OUT of your Cloud account and then log IN again to see the updates
    This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
    -so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
    If you are sure you don't need the old CC programs
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    -read reply #3 about the ORDER of uninstalling & installing
    For program specifics, try InDesign
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • What is the difference between interactive report and alv interactive repor

    what is the difference between interactive report and alv interactive report
    could u plz explain clearly.

    Hi Rajesh,
    interactive report or alv interactive report , both are same but except the viewer, Abap List Viewer (ALV).
    Here in i am placing a sample simple ALV Interactive report.
    Just double click on the customer number to go to the next screen.
    *& Report  ZKAL_ALV_INTERACTIVE_1                                      *
    REPORT  ZKAL_ALV_INTERACTIVE_1                  .
    TYPE-POOLS: SLIS.
      TYPES: BEGIN OF TY_KNA1,
              KUNNR TYPE KUNNR,
              NAME1 TYPE NAME1,
              ORT01 TYPE ORT01,
            END OF TY_KNA1.
      TYPES: BEGIN OF TY_VBAK,
              VBELN TYPE VBELN,
              ERNAM TYPE ERNAM,
              ERDAT TYPE ERDAT,
              NETWR TYPE NETWR,
              WAERK TYPE WAERK,
             END OF TY_VBAK.
    &--WORK AREA & TABLE DECLARATION--
      DATA: W_KNA1 TYPE TY_KNA1.
      DATA: T_KNA1 TYPE STANDARD TABLE OF TY_KNA1 INITIAL SIZE 1.
      DATA: W_VBAK TYPE TY_VBAK.
      DATA: T_VBAK TYPE STANDARD TABLE OF TY_VBAK INITIAL SIZE 1.
    &--FIELDCAT TABLE & WORK AREA--
      DATA: W_FCAT TYPE SLIS_FIELDCAT_ALV.
      DATA: T_FCAT TYPE SLIS_T_FIELDCAT_ALV.
      DATA: W_FCAT1 TYPE SLIS_FIELDCAT_ALV.
      DATA: T_FCAT1 TYPE SLIS_T_FIELDCAT_ALV.
    &--EVENT TABLE AND WORK AREA--
      DATA: W_EVENTS TYPE SLIS_ALV_EVENT.
      DATA: T_EVENTS TYPE SLIS_T_EVENT.
      DATA: W_EVENTS1 TYPE SLIS_ALV_EVENT.
      DATA: T_EVENTS1 TYPE SLIS_T_EVENT.
    &--COMMENT TABLE & WORK AREA--
      DATA: W_COMMENT TYPE SLIS_LISTHEADER.
      DATA: T_COMMENT TYPE SLIS_T_LISTHEADER.
      DATA: W_COMMENT1 TYPE SLIS_LISTHEADER.
      DATA: T_COMMENT1 TYPE SLIS_T_LISTHEADER.
    &----APPENDING FCAT -
      W_FCAT-COL_POS = 1.
      W_FCAT-FIELDNAME = 'KUNNR'.
      W_FCAT-SELTEXT_M = 'CUST. NO'.
      W_FCAT-HOTSPOT = 'X'.            "HOT SPOT HAND SYMBOL
      W_FCAT-EMPHASIZE = 'C119'.       "FOR COLORING THE COLUMN 1
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS = 2.
      W_FCAT-FIELDNAME = 'NAME1'.
      W_FCAT-SELTEXT_M = 'CUST. NAME'.
      APPEND W_FCAT TO T_FCAT.
      W_FCAT-COL_POS = 3.
      W_FCAT-FIELDNAME = 'ORT01'.
      W_FCAT-SELTEXT_M = 'CITY'.
      APPEND W_FCAT TO T_FCAT.
      W_FCAT1-COL_POS = 1.
      W_FCAT1-FIELDNAME = 'VBELN'.
      W_FCAT1-SELTEXT_M = 'ORDER NO'.
      W_FCAT1-EMPHASIZE = 'C519'.
      APPEND W_FCAT1 TO T_FCAT1.
      CLEAR W_FCAT.
      W_FCAT1-COL_POS = 2.
      W_FCAT1-FIELDNAME = 'ERNAM'.
      W_FCAT1-SELTEXT_M = 'NAME OF PARTY'.
      APPEND W_FCAT1 TO T_FCAT1.
      W_FCAT1-COL_POS = 3.
      W_FCAT1-FIELDNAME = 'ERDAT'.
      W_FCAT1-SELTEXT_M = 'DATE'.
      APPEND W_FCAT1 TO T_FCAT1.
      W_FCAT1-COL_POS = 4.
      W_FCAT1-FIELDNAME = 'NETWR'.
      W_FCAT1-SELTEXT_M = 'ORDER VALUE'.
      APPEND W_FCAT1 TO T_FCAT1.
      W_FCAT1-COL_POS = 5.
      W_FCAT1-FIELDNAME = 'WAERK'.
      W_FCAT1-SELTEXT_M = 'CURRENCY'.
      APPEND W_FCAT1 TO T_FCAT1.
    &--APPEND COMMENTRY--
      W_COMMENT-TYP = 'H'.
      W_COMMENT-INFO = 'CUSTOMER DETAILS'.
      APPEND W_COMMENT TO T_COMMENT.
      CLEAR W_COMMENT.
    &--APPEND EVENTS TABLE--
      W_EVENTS-NAME = 'TOP_OF_PAGE'.
      W_EVENTS-FORM = 'TOPPAGE'.
      APPEND W_EVENTS TO T_EVENTS.
      W_EVENTS-NAME = 'USER_COMMAND'.
      W_EVENTS-FORM = 'SUB2'.
      APPEND W_EVENTS TO T_EVENTS.
      W_EVENTS1-NAME = 'TOP_OF_PAGE'.
      W_EVENTS1-FORM = 'TOPPAGE1'.
      APPEND W_EVENTS1 TO T_EVENTS1.
      CLEAR W_EVENTS1.
      W_EVENTS1-NAME = 'USER_COMMAND'.
      W_EVENTS1-FORM = 'SUB3'.
      APPEND W_EVENTS1 TO T_EVENTS1.
      SELECT-OPTIONS: CUSTNO FOR W_KNA1-KUNNR.
      SELECT KUNNR
             NAME1
             ORT01 FROM KNA1 INTO TABLE T_KNA1
             WHERE KUNNR IN CUSTNO.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
       I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
       I_BACKGROUND_ID                   = 'BIKE'
       I_GRID_TITLE                      = 'CUSTOMER DETAILS'
       IT_FIELDCAT                       = T_FCAT
       IT_EVENTS                         = T_EVENTS
      TABLES
        T_OUTTAB                          = T_KNA1  .
      FORM TOPPAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY       = T_COMMENT
         I_LOGO                   = 'LOGO_ALV'.
      ENDFORM.  "END OF TOPPAGE SUB.
      FORM SUB2 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
      READ TABLE T_KNA1 INTO W_KNA1 INDEX FIELDS1-TABINDEX.
      SELECT VBELN
             ERNAM
             ERDAT
             NETWR
             WAERK
                   FROM VBAK
                   INTO TABLE T_VBAK
                   WHERE KUNNR = W_KNA1-KUNNR.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
       I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
       I_BACKGROUND_ID                   = 'KALEEM'
       I_GRID_TITLE                      = 'LIST OF ORDERS'
       IT_FIELDCAT                       = T_FCAT1
       IT_EVENTS                         = T_EVENTS1
      TABLES
        T_OUTTAB                          = T_VBAK.
    ENDFORM.    "END OF SUB2.
    FORM TOPPAGE1.
    &--APPEND COMMENTRYOF SECONDRY SCREEN--
      W_COMMENT1-TYP = 'H'.
      W_COMMENT1-INFO = 'LIST OF ORDERS'.
      APPEND W_COMMENT1 TO T_COMMENT1.
      W_COMMENT1-TYP = 'S'.
      W_COMMENT1-KEY = 'CUSTOMER'.
      W_COMMENT1-INFO = W_KNA1-KUNNR.
      APPEND W_COMMENT1 TO T_COMMENT1.
      CLEAR W_COMMENT.
      W_COMMENT1-TYP = 'A'.
      W_COMMENT1-INFO = W_KNA1-NAME1.
      APPEND W_COMMENT1 TO T_COMMENT1.
      CLEAR W_COMMENT1.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY       = T_COMMENT1
         I_LOGO                   = 'LOGO_ALV'
    REFRESH T_COMMENT1.
    ENDFORM.    "END OF TOPPAGE1
      FORM SUB3 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
        READ TABLE T_VBAK INTO W_VBAK INDEX FIELDS1-TABINDEX.
    SET PARAMETER ID 'AUN' FIELD W_VBAK-VBELN.
    CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
      ENDFORM.
    U can also find some of the useful codes on WIKI-SDN.
    Reward helpful Answers.
    Regds,
    Kaleem.

  • What is the difference between personnel development and performance management

    Hi,
    What is the difference between personnel development and performance management in terms of configuration and in  portal level .
    Thanks
    Srikant

    HI Srikant,
    Personnel development is PD module where u can configure the qualification catalog with the proficiency which can be attached to the position or job as a requirement and the same can be attached to the person as a qualification and then you can do the profile matchup and find any qualification deficit and can propose any trraining required to impart the qualification.And also you can do succession planing, career planing and also development plan.
    Performance management is an appraisal cycle in a company . All appraisal process between manager and the employee will be taken care via portal with the appraisal template.(form)
    hope this will help you.
    regards,
    DInesh

  • The difference between chapter markers and dvd studio pro markers

    Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
    Thanks,

    "Adding Chapter and Compression Markers to Your Sequence
    Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
    • Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
    • Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
    Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
    From the Final Cut Pro User Manual.
    So, JS was right the first time

  • What is difference between interactive list and interactive reports?

    what is difference between interactive list and interactive reports?

    hi check this..
    interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
    report .
    start-of-selection.
    write:/ 'this is the source list'.
    at line-selection .
    if sy-lsind = 1 .
    write:/ ' this is the 1st list'.
    elseif.
    if sy-lsind = 2 .
    write:/ ' this is the 2 list'.
    if sy-lsind = 3 .
    write:/ ' this is the 3 list'.
    if sy-lsind = 4 .
    write:/ ' this is the 4 list'.
    if sy-lsind = 5 .
    write:/ ' this is the 5 list'.
    if sy-lsind = 6 .
    write:/ ' this is the 6 list'.
    if sy-lsind = 7 .
    write:/ ' this is the 7 list'.
    if sy-lsind = 8.
    write:/ ' this is the 8 list'.
    if sy-lsind = 9 .
    write:/ ' this is the 9 list'.
    if sy-lsind = 10 .
    write:/ ' this is the 10 list'.
    endif.
    regards,
    venkat

  • What is difference between SharePoint List and Libraries

    What is difference between SharePoint List and Libraries

    Hello,
    You also might want to loot at here:
    http://veroniquepalmer.com/2013/02/24/the-difference-between-sharepoint-2010-lists-libraries-and-pages/
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/1d4152cd-92a6-4eed-9a52-a519ec71c674/what-is-the-difference-between-document-library-and-list-in-sharepoint
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
    https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

Maybe you are looking for