Different data returned when running report

I have a report showing the diagnostic codes of all our patients. Missing some codes in the report that are stored in the database. Update one patient and get that record to show up, 2-3 other codes for other patients go missing. Very weird.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly

Similar Messages

Why I get "Error in getting session data" error when running report?

Hello,
I have reporting services on one server, and SharePoint 2010 on other server. When I view report from browser, I got blank page. From Report Server Log file, I got below error:
v VERBOSE: writting session cookie: ekkrjbubp00t5wzc3rzspvzb
v VERBOSE: Saved report snapshot to session in a background thread <for same session id>
e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.;
e ERROR: Error in getting session data: Expired Session: ekkrjbubp00t5wzc3rzspvzb
e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: , Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: The report execution ekkrjbubp00t5wzc3rzspvzb has expired or cannot be found
Are there anyone getting the same issue as mine? I did not see any solutions for this issue when I searched.
Thanks,
Megan

There are a number of timeouts in SSRS; session timeout, report execution timeouts, http request timeouts. A session timeout in SSRS is not the same as a session timeout in ASP.NET. Below are some articles that can help you understand the timeouts
and hopefully lead you down the path of discovery.
This articles is a good article as it discusses the session timeout and the keep alive that is sent from the report viewer.
http://blogs.msdn.com/b/jgalla/archive/2006/10/11/session-timeout-during-execution.aspx
This article is good as well in describing some of the timeouts.
http://blogs.msdn.com/b/dynamicsaxbi/archive/2013/02/14/how-to-addressing-ssrs-session-timeouts.aspx

Smart forms print control pop box (no required) when run report

Dear All Expert Guru,
         how to control printing pop box when execute transaction code ,Report are make in smart form format
         because while run our report then come printing pop box select out put device the will come report
                                         . but our user required no should be come printing pop box they are required when run report direct come report
   Pls help me any one.
Thanks & Regars.
Sudhir Srivsatava

Hi,
   Pass the parameter no_dialog = 'X' while calling the smartform.
data: wa_ctrlop type ssfctrlop.
   wa_ctrlop-no_dialog = 'X'.
CALL FUNCTION fm_name
EXPORTING
*   ARCHIVE_INDEX              = ARCHIVE_INDEX
*   ARCHIVE_INDEX_TAB          = ARCHIVE_INDEX_TAB
*   ARCHIVE_PARAMETERS         = ARCHIVE_PARAMETERS
    CONTROL_PARAMETERS         = wa_ctrlop
*   MAIL_APPL_OBJ              = MAIL_APPL_OBJ
*   MAIL_RECIPIENT             = MAIL_RECIPIENT
*   MAIL_SENDER                = MAIL_SENDER
*    OUTPUT_OPTIONS             = OUTPUT_OPTIONS
*    USER_SETTINGS              = 'X'
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       = DOCUMENT_OUTPUT_INFO
*   JOB_OUTPUT_INFO            = JOB_OUTPUT_INFO
*   JOB_OUTPUT_OPTIONS         = JOB_OUTPUT_OPTIONS
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
Regards,
Srini.

Maxmize window when run Report builder 10gR2

Thanks in advance to all,
I have read of a post in which he treated maxmize window when run Report builder 10gR2, but I don't succeed in finding it. Can someone point out me the link?
PS. I have already post on Form Forum

Thanks for your reply.
But i was speaking maxmize window of report builder application on WIN xp, because when i
exe rwbuilder i always,have to maxmize window.
I know that it is a fool problem, but if to someone it happens and he had resolved...
Howevar thanks for your time

Complete data not getting returned when running IIS (v7.5) commands remotely.

Hello All,
I searched quite a number of forums before posting and all that I have come to know is that some have mentioned it to be related to COM. I do not have experience dealing with COM and no idea how I can sort this out. I hope someone can provide guidance on
these:
Question 1: Server (2008 R2 Standard) is having 4 websites. Default - Running, WS2 - Stopped, WS3 - Running and WS4 - Running. When I run the command "invoke-command -computername Server1 -Credential domain\User -ScriptBlock
{import-module 'webAdministration'; get-website}"
I get this output and then an error:
name : Default Web Site
id : 1
serverAutoStart : False
state : Stopped
bindings : Microsoft.IIs.PowerShell.Framework.ConfigurationElement
PSComputerName : Server1
RunspaceId : ca8bbb00-4631-4c92-a7c7-3bec8039eaee
Attributes : {Microsoft.IIs.PowerShell.Framework.ConfigurationAttribute,
Microsoft.IIs.PowerShell.Framework.ConfigurationAttribute,
Microsoft.IIs.PowerShell.Framework.ConfigurationAttribute,
Microsoft.IIs.PowerShell.Framework.ConfigurationAttribute}
ChildElements : {Microsoft.IIs.PowerShell.Framework.ConfigurationElement
Microsoft.IIs.PowerShell.Framework.ConfigurationElement
Microsoft.IIs.PowerShell.Framework.ConfigurationElement
Microsoft.IIs.PowerShell.Framework.ConfigurationElement
Microsoft.IIs.PowerShell.Framework.ConfigurationElement,
Microsoft.IIs.PowerShell.Framework.ConfigurationElement,
Microsoft.IIs.PowerShell.Framework.ConfigurationElement,
Microsoft.IIs.PowerShell.Framework.ConfigurationElement...}
ElementTagName : site
Methods : {Microsoft.IIs.PowerShell.Framework.ConfigurationMethod,
Microsoft.IIs.PowerShell.Framework.ConfigurationMethod}
Schema : Microsoft.IIs.PowerShell.Framework.ConfigurationElementSchema
The data is invalid. (Exception from HRESULT: 0x8007000D)
+ CategoryInfo : NotSpecified: (:) [Get-Website], COMException
+ FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.IIs.PowerShell.Provider.GetWebsite
Command
What I have been able to figure out is that it returns complete data for the Default Website and then throws the error. Tried the same command on another server running 2 websites (both in started state) and same results :(
Question 2: When the same command "Get-Website" is run locally on the server then only 5 columns show by default; Name, ID, State, Physical Path & Bindings. Why then the command when run remotely returns slightly
more data?
PS: I have Win7 x64 on my desktop. Tried the commands from x86 as well as x64 shells and same results.

Hi Yan,
When I use Enter-PSSession, it works in the same manner as if the command is run locally. Hence the same output as local.
I am not sure of the exact way to use [Reflection.Assembly]::LoadFile('C:\Windows\System32\inetsrv\Microsoft.Web.Administration.dll')
I tried this and get an error:
invoke-command -Session $session -ScriptBlock invoke-command -Session $session -ScriptBlock {[Reflection.Assembly]::LoadFile('C:\Windows\System32\inetsrv\Microsoft.Web.Administration.dll'); get-website}
Output:
GAC Version Location PSComputerName
True v2.0.50727 C:\Windows\assembly\GAC_MSIL\Microsoft.Web.Administrati... Server1
The term 'get-website' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the
name, or if a path was included, verify that the path is correct and try again.
+ CategoryInfo : ObjectNotFound: (get-website:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
+ PSComputerName : Server1
The version of the dll on the server is 6.1.7601.17514
Thanks

Getting zero-sized reply error when running report from SQL query

Hi,
I have a Report from SQL Query in Portal. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Problem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
Which version are you using?
Can you post the before report trigger?

Incorrect data returned when using a date prompt

We are using BO XI R3.1 with fix pack 1.3 on windows with a CMS and report database on Oracle 11i. There is one report in which a date range is set by prompting for the Start and End date, depending on the dates entered it sometimes erroneously displays the message `No data to fetch`. It can be confirmed that there is actual data rows, by either running the SQL script in an application such as Toad or by hard-coding the start and end dates into the condition, indicating that it is the `Prompt` which is causing the problem.
For example if the start and end dates are 28/06/2010 - 02/07/2010 there will be no data returned, but if the end date is extended to 30/07/2010 then data will be returned which includes transactions from 28/06/2010 - 02/07/2010. Whether the date range is set using the SQL `between` operator or using the start date greater than or equal and end date less than or equal results in the same `no data to fetch` message displayed.
Is this a known issue or have other users come across this behaviour in their desktopIntelligence reports ?. It may be that it is fixed in subsequent service packs but for the time being our environment cannot upgrade beyond the existing fix pack. This problem can also be replicated on new reports and even on other date fields in the database, and if the prompt is incorporated into the Universe the problem still remains.
Meanwhile any thoughts or ideas on the problem are appreciated.
Edited by: Peter Gibbs on Jul 26, 2010 1:14 PM

Hi Peter,
I've noticed similar behaviour in the past, and it had to do with a difference in language setting between client and server side.
So let's say dutch client, american oracle.
So oracle expects MM/DD/YYYY whereas the users think they must input DD/MM/YYYY.
Now happens something that I consider BO being to clever for its own good.
If a user enter 28/06/2010 it knows that can't have been MM/DD/YYYY since it is invalid that way,
so it swaps it! and gives 06/28/2010 to the database.
A date like 02/07/2010 doesn't get swapped because its valid,
so it gives 02/07/2010 to the database.
So ultimately the database tries to retrieve between Jun 28th and Feb 7th, which gives no data to fetch...
Thats why in situations with different date formats I never use a data field to prompt,
but request the data in a certain format as string and convert it myself in the universe to a dateformat for the database to process. I just state the expected input format to the user so there are no surprises anymore.
Something like "Give date from (ddmmyyyy)"...
Hope this helps,
Marianne

Error when running reports: "File Server needs to be re-initialized"

Hi.
This error "File Server needs to be re-initialized" appears when our users try to run reports on 11.5.10. EBS.
There is also a message box that appears and reads:
"A error occurred while attempting to establish a conection to Application File Server. There may be a network configuration problem, or the TNS listener may not be running."
This is a problem in our test environment. We recently ran autoconfig on the test side.
I have checked Metalink and also wider google search.
Perhaps we have an issue with the tnsnames files? Well, I verified this and the tnsnames in production and test, and they are the same.
Perhaps a listener.ora file issue?
"The issue is caused by the variables APPLFSTT and APPLFSWD is not being set properly in the <8.0.6_ORACLE_HOME> listener.ora file. " (Note 263654.1)
I am trying to verify the meaning of the following (in listener):
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /oracli2/oracle/testora/8.0.6 )
,APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE;PROD_FO,APPLFSWD=/or
acli2/oracle/testappl/admin;/oracli2/oracle/testcomn/temp;/oracli2/oracle/testco
mn/html/oam/nonUix/launchMode/restricted' )
In the APPLFSTT entry, should there be any mention of "PROD" ? Shouldnt this all be changed to TEST?
Also, comparing this to the PROD listener, the order of APPLFSTT is different:
TEST: APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE
PROD:APPLFSTT=
PROD_806_BALANCE;PROD;PROD_BALANCE;PROD_FO,
I have made a copy of our listener in TEst, so I can edit the existing one. Trouble is, not sure if I even should try to edit it!
Any suggestions, much appreciated.
Oracle 9.2.0. AIX 5.2.
Notes covered in Metalink:
274177.1
303971.1
304568.1
263654.1

Yes thanks for that. Metalink has informed me to do the same, basically.
But I am in the middle of a cloning, so I will finish that then run autoconfig once again.
I already ran Autoconfig on both source and target, so will do again once this process is over.
Cheers.
DA

Proxy error when running reports in Infoview

We are running XI 3.1 sp4 and are getting a Proxy error on some reports when running in PDF mode. Any ideas?
Here's the error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /AnalyticalReporting/ViewAsPDF/Disposition Analysis Report.pdf.
Reason: Error reading from remote server
Apache Server at preprod.nalts.com Port 443

Hi Sylvia,
It seems that the reverse proxy you are using: Apache could have problems with the sessions of the users. I have seen the same behaviour with other Load Balancers. If you have different WAS in the backend, make sure they stay with the same WAS (session affinity).
Regards,
Julian

Error 401 when run report "RSCMST" to test my content server

when I run report "RSCMST" to test the my content server. I get the error:
header HTTP/1.1 401 Authorization Required
date: Fri, 05 Dec 2008 20:20:45 GMT
server: Apache/1.3.41 (Unix) SAPCS/640
x-servertime: 20:20:45
x-query: create&pVersion=0046&contRep=ZTEST001&docId=020D3949CA03445AE10000000A14022B&compId=data&docPro ..
t=rud&accessMode=c&authId=CN%3DCPJ&expiration=20081205142027&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYC
x-serverdate: 2008-12-05
x-pversion: 0046
x-errordescription: URI signature has expired
x-serverid: server="content01.ivo.com.cn";serverPort="1090"
x-servertype: SAP HTTP Content Server
content-length: 752
connection: close
content-type: text/plain
~remote_addr:
~uri_scheme_expanded: NONE
want 201
bad 401
time 17.974
It seems that the "bad 401" means a http error. I do not know how to configure it ?
my content server uses the maxdb, and http is apache, they are all running on redhat linux ese 5
who can give me some advices? thanks

hello,
I am also getting same problem with newly installed content server.
I have defined connectivity through CSADMIN. but when I 'm running this report I 'm getting same
time (-93) problem.
Could you please tell me how you rectified time zone setting problem..
would be great help..
Regards
Anju

SPM 2.1 datasource background activity when running report for first time

Hi All,
When I log into SPM and click New -> Report, the cursor changes to the timer icon before i drag in a dimension or run a report.
In SM66 there is an SQL read statement that appears to coincide with this front end behaviour.
Often this process times out in the front end with a timeout error and "time dimension value help failed".
Then if i go to create a new report again, a new tab opens, and it opens instantly and there is no SQL read statement.
Why is an SQL read statement occurring at this point before any data is selected?
Why does it take so long?
Many thanks for any help
Kind regards,
Neil

Hello,
We initialize the time dimension when the reporting console is opened for the first time. Sometimes depending on the load on your server , this could take a long time thus timing out. I would suggest you to look at the load on your java server. Also , check if there are any background processes running on the ABAP side. Also take a look at the timeout limit in Application Properties and see if you can increase this limit.This might help initially.
As mentioned , the time dimension is only initialized when the reporting console is opened for the fist time in a given session. This explains why you don't see such a behavior subsequently.
Hope this helps!
Thanks,
Madhav

Failed to accept user input when run report on Web

I've testing a report with one input parameter. It's a date with default current date. It is done by using SQL 'select sysdate from dual;' has been added to before form trigger. User is allowed to input any date other than the default sysdate before submitting the report. The report works fine when run in report builder, but it's failed to accepted user input date when called through web browser. The report still uses the current date as SQL parameter rather than user input date.
Can anyone help me to fix this bug?
The report is develped by Oracle 9i and is saved and run in .rdf format.

I created a report with a user defined parameter p_date of DATE type. In the layout model, I created a field with p_date as data source. In the before form trigger, I put
'select sysdate into :p_date from dual;
I run the report through rwservlet:
http://host:port/reports/rwservlet?report=datetest.rdf&destype=cache&desformat=html&userid=scott/tiger@orcl&paramform=yes
In the html parameter form, I change the date from default current date to a future date and that date is shown in the final report.
So I can't reproduce the bug.
One thing you can try it to turn on reports server trace file, see what command line is sent to reports server when you submitting the parameter form.
Thanks,
-Shaun

No data returned when optional hierarchy prompt is filled in.

Hi,
I have created a query in Query Designer with an optional hierarchy node variable on Profit Center in the characteristic restrictions.
When I create my report in Crystal, the prompt on Profit Center arise with the option Set To Null marked on. When I keep this option marked, I get the correct data.
But when I enter a Profit Center node into the prompt, I receive no data, even when the entered data exists in the database.
What do I have to enter in a hierarchy prompt? I've tried with the key, the name, the node ID, the parent node ID...
Are there any special options or things I have to focus on in query designer or CR to get this thing working?
Lieven

Hi,
what i was trying to say -run the query in sql developer or whatever ide u r using.
If u get data for both null and value entered then check in database expert(in reports) if there is any link..
I hope u got the right meaning previously.
Regards,
Misra P.

Invalid group section error when running report containing command.

The error is the following (displayed in Dutch, spent some time changing the language settings, but still CR persists in showing the message in my mother tongue, but the gist of it is: invalid group section or something like that) Process error: Ultimo.Services.ReportService.Core.ReportingException: Error creating export file: LtapList02-01.rpt ---> CrystalDecisions.CrystalReports.Engine.InvalidArgumentException: Deze groepssectie kan niet worden afgedrukt omdat het voorwaardeveld van de sectie niet bestaat of ongeldig is. Maak de sectie op om een ander voorwaardeveld te kiezen. Fout in bestand LtapList02-01 {DEE4EF1C-A138-4AE9-8C64-EF8389263782}.rpt: Ongeldige groepsvoorwaarde. ---> System.Runtime.InteropServices.COMException: Deze groepssectie kan niet worden afgedrukt omdat het voorwaardeveld van de sectie niet bestaat of ongeldig is. Maak de sectie op om een ander voorwaardeveld te kiezen. Fout in bestand LtapList02-01 {DEE4EF1C-A138-4AE9-8C64-EF8389263782}.rpt: Ongeldige groepsvoorwaarde. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export(ExportOptions options) etc. The command is phrased thus: select * from {?DatabaseSchemaPrefix}applfn_LtapStructure(). The error is somehow associated with the parameter used in this command. If I remove it and replace it by the value used when running the report, the report runs successfully. Also, strangely, when I define a default value for the parameter in the command and programmatically add a value for it by the method call parameterFieldDefinition.CurrentValues.AddValue(), also the report will run flawlessly. Without the default value it will fail. But when I want to run the command without a value for the parameter (parameterFieldDefinition.CurrentValues.AddValue("")), so for it to be empty, while a default value is defined for it too, also, running the report will result in an error. My question is: has anyone ever seen this type of thing happening? And is there a solution?

Hi
Is it a Date Parameter., ! if so, look for format it is taking. because u said report runs well when default value is assigned. Hope, most probably the problem will be related to data format.
and
try to provide details regarding CR version and all., will be helpful to others to help you.

ORA-44356 when running report from Oracle Application Server 10g

All,
We have some reports that we developed using Reports Builder 10g. We use a few program units that run with every record that use the exec_sql package to run dynamic sql in a remote database. Everything runs fine when we test the reports in Reports Builder. After we compile the reports into the .rep format and place them on our Oracle Application Server 10g portal instance, we are running into the subject error when we try to run the report from the website. From the research that I've done, it seems that this error has to do with the use of exec_sql, but there is not too much info on the web regarding this error number. Running a trace when running the report in Reports Builder doesn't show any errors, and to further complicate things, this error only occurs on some reports...others that use the exec_sql package work fine.
Does anyone have any ideas as to why this might be happening?
Thanks for your help,
Tom

Nothing is different between the reports in the exec_sql section. The strange part is that the reports will bomb out seemingly at random, at different times, and during the execution of different program units. I was able to find a work-around using DB Links, but I'd rather not use the DB Link if I can avoid it.

Different data returned when running report

Similar Messages

Maybe you are looking for