Different Format of Local Database

Hello everybody,
please help. I can't google it:
Is it possible for you to have your local database in another format than that of Sybase iAnywhere DB? I know that the RDBMS for Siebel server can be Oracle, DB2, MS SQL. I have installed MS SQL 2005 on my laptop. Can I direct Siebel to create my local database as one managed by my MS SQL Server? My version of Siebel is 7.8.
Thanks.

If it's performance you're after, you might want to read the following on ML3:
Slow local database performance due to sort collation in Siebel Application versions 7.5.2.211 and later (Doc ID 477096.1)
And it seems you can change some parameters for the ConnectString in the CFG.
What To Check when Encountering Errors when Starting up a Local or Demo SQL Anywhere / Watcom Database? (Doc ID 475850.1)
Full Get in Siebel Tools May Be Time Consuming (Doc ID 476766.1)
But it might be wise to open a SR to see if that is still allowed.

Similar Messages

Same user in tacacs and local database with different privilege

Hi there,
i am just not sure if this is correct behavior.
i am running NX-OS image n5000-uk9.5.1.3.N1.1.bin on the nexus 5020 platform.
i have configured authorization with tacacs+ on ACS server version 5.2 with fall back to switch local database.
aaa authentication login default group ACS
aaa authorization commands default group ACS local
aaa accounting default group ACS
a user test with priv 15 is craeted on ACS server, password test2
everything works fine, until i create the same username on the local database with privilege 0. ( it doesnt matter if the user in local database was created before user in ACS or after )
e.g.:
username test password test1 role priv-0 (note passwords are different for users in both databases)
after i create the same user in local database with privilege 0,
if i try to connect to the switch with this username test and password defined on ACS, i get only privilege 0 authorization, regardless, that ACS server is up and it should be primary way to authenticate and authorizate the user.
is this normal?
thank you for help...

Hello.
Privileges are used with traditional IOS. Privileges are part of "command authorization". Other operating systems (like IOS-XR, Nexus OS , Juniper JunOS) use "role-based authorization" instead of "command authorization".
So traditional IOS can use the "privilege" attribute but other operating systems can not.
Although IOS-XR, Nexus, ACE, Juniper have "roled-based authorization" feature, every single one of them use their particular attributes.
When I was configuring TACACS with ACE, Juniper and other devices I had to capture the packets to find out what were the particular attributes of ACE, what were the particular attributes of JunOS, etc, etc and to search deeply some hints the documentation , because sadly documentation is not very good when talking about TACACS details.
If you find which attributes to use, and what values to assign to the attributes then you can go to ACS and configure a "Shell Profile".
Now back to Nexus 5000. It seems this particular device has the option to mix "role-based" with "command authorization" by overriding the default roles with other roles which names are called "priv". It seems this was an effort to try to map the old concept of "privileges" to the new concept of "roles". Although you see the word "priv", it's just the name of the role. My particular point of view is that this complicates the whole thing. I would recommend to use just the default roles, or customize some of them (only if needed), but not to use "command authorization".
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/security/502_n1_1/Cisco_n5k_security_config_gd_rel_502_n1_1_chapter5.html
I will search the particular attributes Nexus use to talk to TACACS server. If I got them I will post them here.
Please rate if it helps

Header and Footer in different format

Hi ,
I am using a single RDF file to generate a report in 4
different formats by giving the destype during rumtime. I am
facing a problem regarding the Header and Footer . My requirment
is to show the Header and Footer once in HTML (Header on first
page and Footer on last page) and in case of RTF andPDF on each
page. The header and footer contains formula columns in which I
query from database.
Can anyone help me how to do this using one single RDF file.
Thanks,
Alka

Hi,
We tried using trigger as suggested by you for displaying the
header and footer once in HTML. Now we are able to show the
Header on first page in HTML but we also getting blank rows
between records wherever we are hidding the Header .
Please suggest how can we remove these blank rows.
regards,
Alka.
hello,
you could achieve this by using the format trigger of the
header/footer-objects, where you could check the desformat and
the page-number in order to dermine if they should be printed or
not.
regards,
the oracle reports team --pw

How to configure different listener for each database in 11gR2 RAC

Hi Friends,
Current Prod Setup :
11gR2 (11.2..0.2) RAC on RHEL 5.5 with 3 SCAN Listeners on default 1521 port.
Having 4 databases which are using SCAN-IP and listening on default port only.
As per policy, we have to create separate listeners (on different port) for each database.
like,
DB1 - 1522
DB2 - 1523
DB3 - 1524
DB4 - 1525
Even If I configure 4 listeners using NETCA, how my failover & load balancing will happen using SCAN & Newly Created Listeners ???
Thanks in advance..
Regards,
Manish

Hi,
I tried on 11gR2 TEST RAC Server to have different listener with different port (1529) for SCAN & Node Listener & tested failover, load-balancing which was successful.
[oracle@ravish5 admin]$ cat listener.ora
LISTENER_A=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_A=ON # line added by Agent
[oracle@ravish5 admin]$ ps -ef | grep lsnr
oracle 1985 1 0 00:46 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER -inherit
oracle 1988 1 0 00:46 ? 00:00:00 /11g_database/11.2.0.2/product/home_1/bin/tnslsnr LISTENER_A -inherit
oracle 2928 1 0 01:00 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER_SCAN1 -inherit
[oracle@ravish5 admin]$ lsnrctl status LISTENER_A
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 02-MAY-2012 03:19:35
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))
STATUS of the LISTENER
Alias LISTENER_A
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-MAY-2012 00:46:42
Uptime 0 days 2 hr. 32 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /11g_database/11.2.0.2/product/home_1/network/admin/listener.ora
Listener Log File /11g_database/11.2.0.2/diag/tnslsnr/ravish5/listener_a/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_A)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.5)(PORT=1529)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.16)(PORT=1529)))
Services Summary...
Service "TEST" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "TESTXDB" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "srvc_test.clover.com" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter listen
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=192.
168.3.16)(PORT=1529))))
remote_listener string ravish-scan:1529
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
[oracle@ravish5 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521,1529
[oracle@ravish5 admin]$ srvctl config scan
SCAN name: ravish-scan, Network: 1/192.168.3.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /ravish-scan.clover.com/192.168.3.22
[oracle@ravish5 admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: oracle
Home: <CRS home>
End points: TCP:1521
Name: LISTENER_A
Network: 1, Owner: oracle
Home: /11g_database/11.2.0.2/product/home_1
End points: TCP:1529
[oracle@ravish5 admin]$ srvctl config service -d TEST -s srvc_test.clover.com
Service name: srvc_test.clover.com
Service is enabled
Server pool: TEST_srvc_test.clover.com
Cardinality: 2
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: true
Failover type: SELECT
Failover method: BASIC
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: TEST1,TEST2
Available instances:
TEST_NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ravish-scan.clover.com)(PORT = 1529))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = srvc_test.clover.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Actually different ports for different databases are required to have separation of duties. Once Firewall enabled betwen Client & DB Server only privileged users would have access to particular database.
Regards,
Manish

Different formats of the flat file for the same target

In our deployment, we use plugin code to extract the csv files in the required format. The customers are on same version of datamart, but they are on different versions of source database - from 3.x to 4.5 depending on which version of application they are using. In 4.0, we introduced a new column email in the user table in the source database. Accordingly, plugin will add the field in the csv file. But not all the customers will get the upgraded version of plugin at the same time. So ETL code needs to decide which data flow to process depending on the format of the csv file to load data to the same target table. I made the email field in the target table nullable but it still expects the same format of the csv file with delimiter for null value.
Need help to achieve this. Can I read the structure of the flat file in DS or get the count of delimiters so that I can use a conditional to use different data flow based on the format of the flat files.
Can I make the email column in the flat file optional?
Thanks much in advance.

You can add an email column that maps to null in a query transform for the source that does not contain this column.
Or else you can define two different file formats that map to the same file. One with the column and one without

Unable to connect to local database... (what hsould i do ?)

hi guys,
I am having this error when i startup my LOCAL database. it says
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER'
i revert back everything to very very basic.
now in my
LISTENER.ORA
I have only this.
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = szejie)(PORT = 1521))
IN my TNSNAMES.ORA
i have got this,
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = szejie)(PORT = 1521)
IN MY pfile or SPFILE, i have got this
*.local_listener='LISTENER'
WHEN I type STARTUP in SQLPLUS, i still got this error
SYS@orcl on 07-MAR-09> startup
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER'
WILL PMON, automatically register my ORCL service with the the LISTENER ?
What should i do ?
Please help thanks.
Best Regards,
Noob

Hello,
Are you trying to register different port than default port 1521?
Do this or take local_listener completly out of your pfile and try with out
Edit your sqlnet.ora and add the value of NAMES.DEFAULT_DOMAIN to the alias in the tnsnames.ora:
set the domain to "world"
*sqlnet.ora:*
NAMES.DEFAULT_DOMAIN=world
init.ora:
LOCAL_LISTENER=LISTENER
In order to resolve this issue with LISTENER, it is necessary to add the domain "world" to the tnsnames.ora file entry
Or Edit init.ora file and remove loca_listener from it.
sqlplus "/as sysdba"
sql> startup nomount pfile='/path_to_pfile/init.ora'; -- it will process all the init.ora parameter and let you know if you have to resolve more
If successfully processed
sql> alter database mount;
sql> alter database open;
Once successfully opened, then shutdown it down
sql> shutdown immediate;
sql> create spfile from pfile='/path_to_pfile/init.ora';
sql>startup;Regards

Exporting Slideshows in Different Formats

Ok everyone, I'm having a few problems. I just recently ugraded to iPhoto 5.0.4 and everything is fine and dandy, but I'm wondering if there's any way that I can export slideshows that I create in different formats. Let me explain my situation; I'm a high school student in an Advanced Biology class, and our class has it's own website for the projects we do. My teacher has asked me to try to figure out a way to create slideshows with all the pictures we have for the different projects, then save/export them in a format that we can post on a web page. A friend of mine recommended that we make a page with links so that people could select their connection speed and format that they would like to download the file in, for example QuickTime, Real Player, Windows Media, Flash, etc... I've figured out how to export the files in QuickTime and Real Player compatible formats, but that's it. Any help or suggestions would be greatly appreciated, thank you.
Jarrett

Criag:
Yes, iPhoto doesn't support the 16:9 format for exporting. I suggest you useiMovie HD 6. It's still available to Mac users who have iLife 08 and are not pleased with the new iMovie which has been dumbed down from the V6 version. If you add the 16:9 photos to it you can export to that ratio. Also you'll have much more control over the audio trachs being able to cut out portions, fad in and out, overlap etc.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

SSIS project - read multiple flat files with different formats

hi all,
i need to import multiple flat files with different formats into different tables of the sql server database and not able to figure out the best way out in ssis to do so...
please advise the possible methods in ssis to do so and if possible the process which can be dynamic as file names or columns might change in future.

Hi AK1987,
To import flat files with dynamic columns, we can use Script Task inside a Foreach Loop Container to parse the first row of the flat file to get the columns names and save them into a .NET variable, then, we can create “Create Table” script based on this
variable, and then store the script into a SSIS package variable. After that, we create a staging table based on the package variable, load the flat file data to the staging table. Eventually, we load data from the staging table to the destination table. For
the detail steps, please walk through the following blog:
http://www.citagus.com/citagus/blog/importing-from-flat-file-with-dynamic-columns/
Regards,
Mike Yin
TechNet Community Support

Can't see Tables from a local database

I've installed 10G client and the default ORCL database that comes with it. I've create a user and some tables under this user. From within TOAD I can see the tables fine.
In JDeveloper 10.1.2 I set up a DB Connection and connect to the database ok but under the Tables option, no tables are loaded.
I've got other DB Connections to non local databases that I can view fine.
The driver is thin oracle.JDBC.driver.OracleDriver (the same as the non local databases).
Any ideas? How does JDeveloper actually connect, presumably it uses something different to what TOAD uses?

Toad uses SQL*Net while JDev uses a JDBC connection.
To ask the obvious, you don't have a filter on the table node do you?
Have you also tried connecting via SQL*Plus and:
select table_name from user_tables;
...to see if you can access the tables.

RV082 DNS Local Database doesn't work

I recently upgraded the firmware to 2.0.2.01-tm (from 2.0.0.19-tm). Now I noticed the RV082's local DNS server ("DNS Local Database" feature) does not work any more. Any URL-IPaddr combo I used to put in there was resolved prior to sending a request to the WAN's primary/secondary DNS server.
It isn't a PC problem. I tested on different real and virtual machines, windows and Linux. Is there new "enable" switch somwhere? Anyone, any ideas? Suppose I log into the RV082 with puTTY, what can or should I do?

You can try a factory reset and reload the configuration but the above step i suggested if it didn't work then next suggestion would to be factory reset and reconfigure manually and then test.
So yes you can try that first then try what i suggested and if that don't work then it will be next step
Factory reset and reconfigure manually.. Some times when upgrading it can cause some corrupted files and only way to fix is a factory reset and reconfigure (manually)..
Jasbryan

Can i use local database in webdynpro

Hai,
I want to store a string in the local database. is it possible to store in local dictionary-->structures.
using this how cani store , retrieve, update and delete the data in the local dictionary.
regards,

Hi Naga,
It was discussed already:
store data in database and access
making database connection
REG: DATABASE Connection
Best regards, Maksim Rashchynski.

Inserting data from one table to another in different format

Hello,
I would like to know what I am doing wrong with the following code when I write a data from one another to another table in a different format. I am now learning PL/SQL and am using this as
a test problem.
I have a table called students which has the following columns:
SQL> desc student
Name Null? Type
----------- ----------------STUDENT_ID NUMBER(10)
COURSE VARCHAR2(10)
CREDITS NUMBER(10)
I have created another table called new_student which has the following structure:
SQL> desc new_student
Name Null? Type
----------------------------------------- -------- ------------- STUDENT_ID NUMBER(10)
COURSE VARCHAR2(30)
CREDITS VARCHAR2(10)
The data in the student table is:
SQL> select * from student;
STUDENT_ID COURSE CREDITS
1 Science 4
1 History 3
2 Science 4
2 History 3
2 Math 4
3 Sociology 3
3 Psycology 3
I want to store the STUDENT table data in NEW_STUDENT table as:
STUDENT ID COURSES CREDITS
1 Science/History 4/3
2 Science/History/Math 4/3/4
3 Sociology/Psycology 3/3
This is my code:
DECLARE
-- Get all the student IDs
CURSOR studentlist_cursor IS select distinct student_id from student ORDER BY student_id;
-- Get the information for each student ID
CURSOR courses_cursor(nstudentid number) is select course, credits from student where student_id=nstudentid;
nIndex     INTEGER;
pltcourses     DBMS_SQL.VARCHAR2_TABLE;
pltcredits     DBMS_SQL.NUMBER_TABLE;
newcourses varchar2(50);
newcredits varchar2(10);
BEGIN
FOR student_rec IN studentlist_cursor
LOOP
nIndex:=0;
-- Loop through each student ID from student_rec to get the
--courses and creditsstudent ID
FOR courses_rec in courses_cursor(student_rec.student_id)
     LOOP
     nIndex:=nIndex+1;
     pltcourses(nIndex):=courses_rec.course;
-- Store the course data for each student ID in newcourses
-- while doing so check if it is null or put a '/' between each course
loop
if newcourses is null then
newcourses:=pltcourses(nIndex);
else
newcourses:=newcourses||'/'||pltcourses(nIndex);
end if;
end loop;
     pltcredits(nIndex):=courses_rec.credits;
--Store credits data in variable newcredits
--If the newcredits is not null then put a '/' between each credits
loop
if newcredits is null then
newcredits:=pltcredits(nIndex);
else
newcredits:=newcredits||'/'||pltcredits(nIndex);
end if;
end loop;
-- Insert student id, newcourses, newcredits into NEW_STUDENT
INSERT INTO NEW_STUDENT
(student_id ,
course,
credits
) VALUES
(student_rec.student_id,
newcourses,
newcredits
COMMIT;
-- come out of the student id record and go to the next student --id record
END LOOP;
-- come out of the loop
END LOOP;
END;
While doing so I get an error message:
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 23.
The error is at the line:
newcourses:=newcourses||'/'||pltcourses(nIndex);
Can anyone help me by pointing out where the mistake is?
Thank you for reading this long mail.
Thank you.
Rama.

Hi dude
there is lot of error in ur pl/sql.
and u have created table new_student with columns
student_id number(10),
courses varchar2(30),
credits number(10).
first u need to modify ur table.
student_id number(10),
courses varchar2(30),
credits varchar2(10).
Now i am writing whole pl/sql block for u. it will work fine.
DECLARE
CURSOR studentlist_cursor IS select distinct student_id from student ORDER BY student_id;
CURSOR courses_cursor(nstudentid number) is select course, credits from student
where student_id = nstudentid;
nIndex INTEGER;
pltcourses DBMS_SQL.VARCHAR2_TABLE;
pltcredits DBMS_SQL.NUMBER_TABLE;
newcourses varchar2(50);
newcredits varchar2(10);
BEGIN
FOR student_rec IN studentlist_cursor
LOOP
nIndex:=0;
newcourses := null;
newcredits := null;
FOR courses_rec in courses_cursor(student_rec.student_id)
LOOP
nIndex:=nIndex+1;
pltcourses(nIndex):=courses_rec.course;
if newcourses is null then
newcourses:=pltcourses(nIndex);
else
newcourses:=newcourses||'/'||pltcourses(nIndex);
end if;
pltcredits(nIndex):=courses_rec.credits;
if newcredits is null then
newcredits:=pltcredits(nIndex);
else
newcredits:=newcredits||'/'||pltcredits(nIndex);
end if;
end loop;
INSERT INTO NEW_STUDENT
(student_id,
course) VALUES
(student_rec.student_id,
newcourses);
END LOOP;
END;
and please revert back
Regards
Anil

Remote and local databases

let say that i access a oracle form through the web and that form access data from two distributed databases, then will there be a remote database and local database for the user or all the databases will be remote databases to the user

In my opinion.
using local databases -- access tables without DB_link
using Remote databases -- access tables through DB_link

How to get Date Format from Local Object.

Hi All,
I am new to Web Channel.
I need to know Date format From date of locale.
suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC.
Is there any way to get Date format from "Locale" object. I should get date format for local object
I get local object from "UserSessionData" object but how to get Date format from it.
I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format. I could not find example which show how to get date format from "Locale" object.
Any help will be appreciated with rewards.
Regards.
Web Channel

Hi,
You can get it from "User" or "Shop" business object.
Try to get User or Shop Business Object as shown below.
BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = bom.getUser();
char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
If you are seeing "1,234.00" then above code will return "."
I hope this information help you to resolve your issue.
eCommerce Developer.

CSCus07365 - should I not use DNS local database at all or I can enable it again after disabling?

I had an issue with my RV320 that it suddenly stops answering DNS queries from my LAN. I just found out that a new firmware was released last month (v1.1.1.19), and one of its "known issues" is bug id CSCus07365 according to the release notes:
Sometimes the DNS process is gone and can not reply the DNS request from LAN network.
Solution: Check if you have enabled DNS local database feature on RV320/325, disable it, and then configure and save the WAN setting page again.
From that description I am not sure if this is a one-time issue after upgrading (so that I should disable and re-enable it), or if this is still a current issue and it will be better to keep away from DNS local database at all until a new firmware is released.
Thanks in advance!

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Different Format of Local Database

Similar Messages

Maybe you are looking for