Different password demands after resetting users login password

iMac 27", Mavericks
Had to reset users (norm.) password.
Now user gets demands from Mail, Calendar agent and com.apple.iCloudHelper.xpc where those programs want to use keychain and user must give his password.
What has happend?
How to stop these demands?

Resetting the user login password does not reset the keychain password. You must change the password on the login keychain to match the users new password.
You can change it in the Keychain Access program.
If you do not know the users old password, you'll have to reset the login keychain, losing all stored passwords.

Similar Messages

Dynamically configure different DNS server based on user login.

I've got two young sons and I'm looking to reconfigure the 'Family' desktop to give the older son his own user account.
I've only recently started with Arch on my personal netbook so the family desktop is still running Ubuntu. That will likely change next clean install though.
I'd like to set the DNS to OpenDNS 'family shield' for his usage but allow full access via a different DNS server such as google DNS (for example) for parental use without filtering.
I'd like this to switch auto magically based on the user login credentials if possible.
I understand the limitations of DNS filtering but my oldest son has never even heard of DNS much less being able to figure out how to circumvent it yet. I'll deal with that in several years when it becomes an issue...
Can anyone point me in the right direction?

bergersau wrote:Thanks,
It looks like I might have to set up a squid proxy with Dan's Guardian. I was hoping for a simpler solution though.
Dan's Guardian is going to be a whole lot simpler than hacking the system resolver to use different servers for different users.
You MIGHT be able to hack something with iptables, the NAT table and a DNAT in conjunction with the 'owner' module... Something like:
Set your "unrestricted" DNS server in /etc/resolv.conf and a rule like below...
I'll assume you set the Google servers; 8.8.8.8 and 8.8.4.4 and your son's usernames are 'brad' and 'tony'
iptables -t nat -A POSTROUTING -d 8.8.8.8 -m owner --uid-owner brad -j dnat --to 208.67.222.222
iptables -t nat -A POSTROUTING -d 8.8.4.4 -m owner --uid-owner brad -j dnat --to 208.67.220.220
iptables -t nat -A POSTROUTING -d 8.8.8.8 -m owner --uid-owner tony -j dnat --to 208.67.222.222
iptables -t nat -A POSTROUTING -d 8.8.4.4 -m owner --uid-owner tony -j dnat --to 208.67.220.220
Untested and I don't guarantee that will work. You could tidy it up and bit using subchains etc, but I'll leave that as an exercise for the reader.... And I'd still recommend a filtering proxy over the above....

Sharepoint 2010 locking out users after changing user login

We have changed several users logon UPN to match our proactis.com domain in azure / office 365 in preparation for sync our active directory.
But since doing so it would appear that users are no longer getting access to our sharepoint 2010 server randomly. It prompts the user for their username and password. When they then enter this, it rejects it and locks their accounts.
Has anyone seen this behavior before?

Hi Proactis,
Based on your description, my understanding is that the users with changed UPN cannot access SharePoint Online in Office 365.
If I misunderstood, please feel free to correct me.
This issue may be due to that the changes aren't synced by the Azure Active Directory Sync tool after you change the UPN of a user account to use a different federated domain.
I recommend to run the following command to see if the issue still occurs:
Set-MsolUserPrincipalName -UserPrincipalName [email protected] -NewUserPrincipalName
[email protected]
You can refer to the link below for detailed steps:
http://support.microsoft.com/kb/2669550
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

How to generate an alert box with some message by Apple Script after every user login

Hi,
I am looking into an automation where whenever a user comes and does a login on his/her mac. It should pop an alert message to him.
I want to achieve this in applescript.
Is this possible?
Thanks in advance for your suggestions and help!
Abhishek

Do you want it to run on any, unspecified user account? or specific users?
If specific users, save the script as an application and save it in their Login Items.
If you want all users then a hybrid AppleScript/shell script combo might be your best bet.
Create a shell/AppleScript:
#! /usr/bin/osascript
tell application "Finder" to display dialog "welcome"
Then create a launchd agent in
/Library/LaunchAgents
that will cause the script to load whenever any user logs in. Get yourself a copy of Lingon if you're not famiiar with creating launchd .plists

Send a mail to the user after first time login

How to send mail to the user after the user login for the first time in oim 11g r2

How to send mail to the user after the user login for the first time in oim 11g r2

Install an application 2 minutes after user login

Hi,
i have a problem with the installation of an application. the installation starts after the user login. thats a problem because we have sometimes short timeouts after the login so it would be great if someone can help me to set the installation 1 or 2 minutes after the user login.
Is this possible? we use zenworks 6.5.20

Originally Posted by ropi
Hi,
i have a problem with the installation of an application. the installation starts after the user login. thats a problem because we have sometimes short timeouts after the login so it would be great if someone can help me to set the installation 1 or 2 minutes after the user login.
Is this possible? we use zenworks 6.5.20
Maybe an option to use a sleep or delay command/exe, for example : RJL Software - Software - Utility - DelayExec
Call that in a force run application that runs a cmd where the delay then gets started, waiting the amount of time specified and then the installation gets kicked off?
If this works or not could also be dependent on rights needed etc...

Concurrent user logins using same user ID- Is it Possible?

Hi Experts,
I want to know how can I make the configuration for user ID in SAP to login in to the system at once through different machings. Basically concurrent user logins using same user ID.
Is this is possible? whats the configuaration? Am I violating any SAP license policies?
Please help me with this.

just for the knowledge, it is possible and via following parameter
login/disable_multi_gui_login
http://help.sap.com/saphelp_nw04s/helpdata/en/22/41c43ac23cef2fe10000000a114084/content.htm
However, it is not permitted to use in Production at all. But sometimes, only in critical situations, for eg. we have only a few basis IDs and some maintenance task is to be carried out involving more resources, multiple gui login can be utilized in sandbox to for that ID.
But, it is for sure that, USMM report will be sent to SAP for the sandbox too. So client is subjectable. If you, as a basis guy, are going to try it, then please do it only after the confirmation from the client and only if client needs it.

Run a powershell script on every user login/unlock

Hi everybody
I need to run a powershell (that opens an interactive dialog box) when every user log in or unlock session or remote connection to this server. In other words it have to be run every time a user enters a credential.
I tried task scheduler, but it didn't work properly. I tried triggers like "on workstation unlock" and "on connection to user session". I change user and group to administrators but still it runs under the author user (me) .
I found out user login event id is 4801 and 4778. can I use these event ids to run powershell code? Can I check raising the event ids through my code?
any other idea please?
Thanks in advance

Im not going to block a logon! I want to run a powershell code for every user login. assume like a message after user login. this kind of message for me is showing to me after other users login.
specifically this is a window from that I designed to execute on user login to show on the server and every user writes down in the text box the changes that is making on the server. this is a changes log solution to me. then I need to show every user to
work properly.
You can run a scheduled task at logon that can display a message. You can define this task in Group Policy.
You can also just use the standard user logon message which can also be defined in Group Policy.
You can execute a script task whenever an unlock event happens. This, too, can be defined in Group Policy.
¯\_(ツ)_/¯

New users with Global Password Policy requiring password "reset on first user login" are still prompted to reset password after entering incorrect password

The setup:
We have the option "Password must: be reset on first user login" enabled in the Global Password Policy on our 10.9 / Mavericks server. We import new user accounts into Open Directory via a delimited text file and include a default password for each user.
What I've observed and tested:
When a user attempts to log into a computer that's bound to our Open Directory for the first time, they can enter anything in the password field and still receive the prompt to reset their password. They are never notified that they entered their default password incorrectly. The password reset will then fail (as it should), but they still aren't notified that this is the reason for the password reset failure. To put it another way: Seeing the prompt to reset your password would reasonably imply that you entered the default password correctly, but that's not the case at all.
The question:
Is this expected behavior? If it is, it doesn't seem logical. If this was the case in OS X Server 10.3 through 10.7 I never noticed it. Can anyone corroborate this with their own setup? Thanks in advance.
-- Steve

Some follow up questions:
- How did you migrate (dsmig ldif or binary import)
- Did the accounts in .x have any custom password policies set?
For a "new" and a migrated entry, can you check if a passwordpolicysubentry is configured?
(search as directory manager and fetch the attribute)

Why do I get sent to the User Login screen to enter my password after sleep?

Hi,
On OSX Lion, 10.7.4. I recently had to reinstall the OS on a new hard drive in my iMac and now have an issue with it that I never had before.
After prolonged periods of sleep (I haven't determined what the minimum length is before this will happen), when I come to wake the computer it shows me the User Login screen. Under my user icon is an orange checkmark, presumably to show that I am the user logged in. Otherwise it is exactly the same as the User Login screen one gets when the computer boots up. I select my user icon and enter my password and the computer unlocks.
I haven't got this set up anywhere, that I know of. I don't have the 'Security & Privacy - Require password for sleep and screen saver' option checked, never have. If I do turn that on just to check, it's a very different password screen, a little popup window in the centre of the dimmed screen.
How do I turn this feature off?
Thanks,
Owen

Sounds like you may have deleted something you shouldn't have. Boot to an OS X DVD or a bootable backup, and using Disk Utility, do a repair disk, and while there repair permissions. Disconnect any peripherals, and reboot. If you get the same startup behavior, do a safe boot, by holding the shift key down when booting. If that works, try a normal boot. If neither step helps, you may need to relaod your operating system.

Can't login even after resetting password using install disk

I have been unable to login in using the password on this computer. Twice now I have reset the password using the install disk that came with the computer. After resetting. I quit the installer and then reboot using the computer's startup disk. When I try to login with the new password, it won't let me uses the password even though the new hint is correct. How can I solve this?

I think you have two choices...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
It'll boot like a newly setup Mac, but all your stuff should still be there once filling out the stuff.
Or, an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.
But first...
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes. (May or may not work)

Got an error while setting up account after reset password: "Wrong user name or password"

Firefox Sync
I've perform "Reset password" operation and tryed to set up Sync again - and got an error "Wrong user name or password". After resetting password once more error still remains.
This affect after I've update my Firefox to version 8.0.

Hi Khimesra,
Could you please try the following:
1 - Firewall/antivirus disabled
2 - B1 uninstalled
3 - Net 1.1 installed
4 - B1 reinstalled
Please also refer to the following SAP notes:
546344 and 542690
Regards
Emanuel

User must change password after reset?

I am looking at the password policy settings and am wondering what "User must change password after reset� actually does. I turned it on. I tried changing some passwords in an ldap client and didnt get any messages or errors after authn again. And I didnt see a special attribute in the persons entry. Any clues?

When the flag is enabled and the password is changed by "cn=directory manager", the next time the user authenticate, the server returns the Password Expired Control (with a Success code) and all requests other than modify of userPassword are rejected.

Issue comes after resetting the password of SYSTEM user???

Hi experts,
if there is an issue comes after resetting the password of "SYSTEM" user id in oracle 10g, ECC6.0
ecc 6.0
oracle 10g
HPUx
Regards,
vivek

>> Using brtools you won't be able to change the password for database users like SYS and SYSTEM.
Are you sure about this? I am sorry but it is not correct. You are able to change these passwords by using brtools
Best regards,
Orkun Gedik

My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password whenever I need to update apps it shows his previous user name, and is asking for his password. How do I fix that?

My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password, whenever I need to update apps it shows his previous user name, and is asking for his password. How do I fix that?

dom59 wrote:
Ok, when I go into my Apple ID account, everything looks right. It does show my user name. It's only on the iPod that it shows my husband's previous user name, and it asks for his password. Everything in iTunes and my account looks right. The issue only seems to be with the actual device, iPod Touch 4th gen.
There is more than one way to access the Apps Store and the iTunes store. One is via iTunes on your computer, and the other is via the apps on your iPod.
Just because you are logged in on your computer does not mean you are logged in on your iPod.
The reason your husband's user name comes up is because he was the last one to log on. You can change that by going to Settings>Store. Tap the Apple ID, Tap Sign Out, Tap Sign In, Tap Use Existing Appel ID, enter your e-mail address and Apple ID password, and tap OK.

Different password demands after resetting users login password

Similar Messages

Maybe you are looking for