Different user or different database

Hello everyone,
we have oracle 10g server on win2008 64bit os,
now we run one project and its data on the server. After a months a new big project will be run on the same server .
So we must answer this important question?
We can run new project data with its user on same database
We can install a new database and run new project data on the new database on same server.
which one provides better performance to us?
How can we decide to install a new(as second one) database on same oracle 10g server?
can anyone help us?

Yes you can create same users for newly create database ,this is not conflict for existing database.
As you mentioned, you are go to implement new big project data will be stored in your server. You should check your Server space capability and etc ,
you should evaluate How much space you need for store for your data and backup and so on.
You can create a new database using "DBCA" --database configuration assistant.

Similar Messages

Same colour profile, but different users have different colour output!

Installed Snow Leopard on a new Mac mini. Migrated two users from a Leopard install, made one fresh user.
Sticking with the default profile for my monitor (HP 2159m), the freshly-made user matches the colour at the login window. The two migrated users, despite having the same profile selected, show darker colour than this. What gives?!
Tried the guest account, and that matched the login window too. Can only assume this is a preferences issue or something, but having deleted some likely-looking plists (~/Library/Preferences/com.apple.ColorSyncCalibrator.plist, ~/Library/Preferences/com.apple.ColorSyncUtility.plist and some .GlobalPreferences files in ~/Library/Preferences/ByHost/), nothing has changed. These two users still have odd colour.
You can watch it change. The new user will stay the same from the login window while the Finder loads, but for the migrated users the colour noticeably darkens immediately after the login window disappears. I'll reiterate: System Preferences claims they've all got the same profile selected.
Any ideas?

In case anyone else finds this, I discovered the root of my problem.
The users with the odd, inconsistent colour profiles had got "Increase Contrast" turned on in Universal Access. Both only slightly, both by the same amount. Highly suspicious, as I know these different users had not changed this setting. Wonder if it's a migration problem. Anyway, colour is now consistent.

Two different users see different web page of ssl vpn

can i achieve this ？

Yes, that can be done. In the "Customization" part of the ASDM you can change nearly anything what controls the look and feel of the portal page. The customizations can then be assigned to your group-policy.
If you also want to have different login-pages, then you need to apply the customization to the connection-profile and the different user-groups need to use different URLs to access these profiles.
Sent from Cisco Technical Support iPad App

Can DFM notifiy/email different users for different device errors?

I'm aware how to change DFM thresholds/polling for different devices. I can get notification working fine for "an email".
But,
Can DFM email "joe" for router failures, and "fred" for switch failures?
URL to describe steps would be great!
Might Cisco implement this feature if not already?

From http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/dfm/dfm_faq.htm#67620
Q) Can I configure the Mail Notifier Adapter to send notifications to different recipients depending on the fault type?
A) No. You can send notifications to different recipients, but all recipients will receive the same information.

Different users with different Software installed

Hi there,
As I am rebuilding my computer and recovering my user through Time Machine, I suddenly thought about creating two separate users on my machine:
1.- Me: for my day to day usage.
2.- Developer: an account specifically targeted to install apps and/or test stuff.
In the second one I would like to be able to install apps I do not want accessible in the first and viceversa (I literally want to keep them perfectly separated so, in the case I want to rebuild my computer again, I can make a "clean restore" of user 1 while starting from scratch with user 2 to keep installing software and other testing situations.
The questions are:
A) Is this possible?
B) if so, how?
Thanks in advance

Thank you CT :-))
I do believe that would be a very feasible workaround. My fear (or my questions) goes into the following direction:
a) by doing so, are you keeping anything outside of that folder potentially affecting other programs (supposely, uninstalling apps in MacOS is clean, but there are so many apps to "completely uninstall applications" that I wonder if that is true).
b) I am looking for a programmatic solution (your solution definitely seems to be feasible, but I was looking for a system option or similar to make clear split among users within the same computer).
Thank you very much in any case :-))
Jose.

Different users for different BPEL domains in BPEL Console

Hi,
is it possible to create the domains do1 and do2 with two admins called do1_admin and do2_admin, where do1_admin can administer all things in do1 and no in do2 ....
Thanks...

I dont think its possible , but yes definitely I shall try and let you know:)
Message was edited by:
AnirudhPucha

Compare 2 different users inside oralce 10

goodmorning everybody,
is it possible compare all the tables owned by 2 different users inside a database?
for example i have 2 different structure for 2 different users and i would like to check the difference and then apply the difference..
is it possible to do it by SQL command?
thanks

goodmorning everybody,
is it possible compare all the tables owned by 2 different users inside a database?
for example i have 2 different structure for 2 different users and i would like to check the difference and then apply the difference..
is it possible to do it by SQL command?
thanks

How to create different log files for different users in log4j

I want to create different logs for different users, using different appenders for each user so that logs are created in his file only.
Confusion:How to direct them to different files in my logger class

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create different users in a unique project?

Hi,
We are able to create different users in security manager,but it is not possible to grant privileges accordingly.According to our requirement we need different users with different granting privileges so that our work should be secured.After login with different user we are getting the below error
com.sunopsis.core.SecurityAccessException: com.sunopsis.core.SecurityAccessException: You are not authorized to View the Object:SNP_TECHNO : Oracle / 1999
Thanks
Suresh

Hi there,
I am also receiving this same error and I'm not sure what you mean by granting the users the correct access to the Topology items. I mistakenly deleted the CONNECT profile and I have re-created it with all of the same objects it had in it before but it is not letting my users in and fails with this same error..
However, the supervisor and the any of us admins that are marked as supervisors can still get in no issues..
Please help!

Can I run the admin and managed servers as different users?

in unix, is it possible to run my admin and manged servers as different users with
7.1?

As long as users are in admin group, there could be different users starting different
servers.
"Frank" <[email protected]> wrote:
>
"Erik Johnson" <[email protected]> wrote:
Hi, Frank.
Could you be a little more specific about what it is you want to do?
Thanks.
erikUh, I'm on unix, I have Weblogic 7.0 service pack4. I have 1 managed
server and
I have one admin server...Can I run the admin server as user 'hithere'
and run
the managed server as user, 'byethere'......
"Frank" <[email protected]> wrote:
in unix, is it possible to run my admin and manged servers as different
users with
7.1?

S_ALR_87011964 - Different figures by different users

In our case,two users are executing report S_ALR_87011964 for asset balance. However, they are getting different figures on execution. Why this is happening so ?

Hi,
Always check selection parameter of user, manytime this happens when different user use different selection parameters and they get different values.
In case selection parameters are same then check user authorization. e.g. if particular user is not authorized for any business area, asset class then user will get report output as per his authorization.
If authorization is also same then reconcile both report by each asset class.
I hope this will help you.
regards,
Prashant Rane

How can I consolidate all photos from different users on one computer?

We just enable one computer to be the "Family" computer. I want to be able to consolidate all photos from the different users into one location. That way no matter wich user is login they can see and browse all the family photos. How can I do that? Do I need and external drive?
Thanks in advance?
MoMa

Move the iPhoto Library to the Users/Shared folder, or you can use an external disk formatted Mac OS Extended (Journaled).
Merge the Libraries as Larry says, with the paid version of Library Manager.
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Each account will have full access to the library, in fact, each account will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

How to configure different listener for each database in 11gR2 RAC

Hi Friends,
Current Prod Setup :
11gR2 (11.2..0.2) RAC on RHEL 5.5 with 3 SCAN Listeners on default 1521 port.
Having 4 databases which are using SCAN-IP and listening on default port only.
As per policy, we have to create separate listeners (on different port) for each database.
like,
DB1 - 1522
DB2 - 1523
DB3 - 1524
DB4 - 1525
Even If I configure 4 listeners using NETCA, how my failover & load balancing will happen using SCAN & Newly Created Listeners ???
Thanks in advance..
Regards,
Manish

Hi,
I tried on 11gR2 TEST RAC Server to have different listener with different port (1529) for SCAN & Node Listener & tested failover, load-balancing which was successful.
[oracle@ravish5 admin]$ cat listener.ora
LISTENER_A=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_A=ON # line added by Agent
[oracle@ravish5 admin]$ ps -ef | grep lsnr
oracle 1985 1 0 00:46 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER -inherit
oracle 1988 1 0 00:46 ? 00:00:00 /11g_database/11.2.0.2/product/home_1/bin/tnslsnr LISTENER_A -inherit
oracle 2928 1 0 01:00 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER_SCAN1 -inherit
[oracle@ravish5 admin]$ lsnrctl status LISTENER_A
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 02-MAY-2012 03:19:35
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))
STATUS of the LISTENER
Alias LISTENER_A
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-MAY-2012 00:46:42
Uptime 0 days 2 hr. 32 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /11g_database/11.2.0.2/product/home_1/network/admin/listener.ora
Listener Log File /11g_database/11.2.0.2/diag/tnslsnr/ravish5/listener_a/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_A)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.5)(PORT=1529)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.16)(PORT=1529)))
Services Summary...
Service "TEST" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "TESTXDB" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "srvc_test.clover.com" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter listen
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=192.
168.3.16)(PORT=1529))))
remote_listener string ravish-scan:1529
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
[oracle@ravish5 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521,1529
[oracle@ravish5 admin]$ srvctl config scan
SCAN name: ravish-scan, Network: 1/192.168.3.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /ravish-scan.clover.com/192.168.3.22
[oracle@ravish5 admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: oracle
Home: <CRS home>
End points: TCP:1521
Name: LISTENER_A
Network: 1, Owner: oracle
Home: /11g_database/11.2.0.2/product/home_1
End points: TCP:1529
[oracle@ravish5 admin]$ srvctl config service -d TEST -s srvc_test.clover.com
Service name: srvc_test.clover.com
Service is enabled
Server pool: TEST_srvc_test.clover.com
Cardinality: 2
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: true
Failover type: SELECT
Failover method: BASIC
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: TEST1,TEST2
Available instances:
TEST_NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ravish-scan.clover.com)(PORT = 1529))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = srvc_test.clover.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Actually different ports for different databases are required to have separation of duties. Once Firewall enabled betwen Client & DB Server only privileged users would have access to particular database.
Regards,
Manish

Sharing iphoto library with different users

I have a new imac, set up different users for myself and my wife. We have been uploading our photos to iphoto on my account and evertime she would like to access them she has to log out and into my account.
Any way to share the library between users?

There is a bug in iPhoto 11 that prevents two users having the app opened at the same time, so Sharing using the preferences method is pretty much pointless until that's fixed.
That said:
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

Connect from iPad to MacbookPro as a different user?

Here is, in a nutshell, what I would like to do:
I would like to log in to my MacbookPro as user "me" from an iPad,
while someone else is already logged in on the Macbook the conventional way as "he".
I would like to do my email, using the Mail app on my Macbook, while my kids are watching a movie on it,
and even if they are logged in under there account.
IIRC, this used to be possible on Unix/Linux (I grew up under Unix about 15 years ago).
I have tried screen sharing and a VNC client on the iPad (VNC viewer from RealVNC), but
1. it seems to work only if the VNC server is running on the Macbook;
2. I don't see how I can log in as a different user *and* have my own GUI session.
I read posts on the internet that claim that it is possible to do what I want, and they seem to refer
to VNC and/or Apple's Screen Sharing, but I didn't find any specific details.
Yes, I have Screen Sharing on under System Preferences > Sharing.
Any insights, pointers, and hints will be highly appreciated.
Best regards,
Gabriel.
PS:
The iPad needs to be registered with my son's Apple ID because he needs it in school.
PS:
Yes, I could install a second mail client on the iPad, but then I still would not have access to all the local mail folders on my MacBook.

Yes, you are right, my logout url is re-directed to the login page.
However, I tried to add the logout url in authentication scheme as you said, it does not work.
error msg: No functional attributes may be set when page sentry function is '-DATABASE-'.
My project is:
I have a oracle database with tables, functions/procedures/packages. The role privilege to access the database has been granted to a few users. Then, I developed an application in apex to access the database and run procedures.
I expect the security of apex application log in is: the users who can access the database can use the application.
So what I did:
1) I set up the authentication scheme of the application as 'database' scheme, The detail is as following:
Description: Use database authentication (user identified by DAD).
Page Session Management: Page sentry function: -DATABASE-
the left areas are all null.
2)I developed a home page (page1): the detail is as follows:
regions: html region with a logo linked to page2
item: url item, source: pl/sql function get_url(), maintain session state as per session
computation: get_url(). It only has one command to return database http login address, to ask enter username and password. BeginThis function is expected to require and provoke a database login
when the application computes the above item using this function.
branch: after log in branch to page2.
3) set up a Navigation Bar for logout as :
wwv_flow_custom_auth_std.logout?p_this_flow=&APP_ID.&p_next_flow_page_sess=&APP_ID.:1
The purpose of provoking database login has come true.
However, the problem is: after I logout from the application and it redirected to page1, when I tried to log in again as a different user, it will automatically log in as the former user (without asking username and password). I have to close the IE, and rerun IE, then I can log in as another user.
I hope I have expained it clearly.
Cheers.
Sue

Different user or different database

Similar Messages

Maybe you are looking for