Once in awhile my screen will freeze while I'm watching a video. Lately it's happening more often, I'm watching a video and it'll freeze BUT I can still hear the dialogue. Only solution I've found so far is to do a hard shut down. HELP!!

Once in awhile my screen will freeze while I'm watching a video. Lately it's happening more often, I'm watching a video and it'll freeze BUT I can still hear the dialogue. Only solution I've found so far is to do a hard shut down. HELP!!

Hi there, im also having this problem, i tried running most of the games on my system, and some that are considered "high end" games, are giving me the exact same problem, but other games are running and im able to message fine, i also got some friends to send me messages, and i can recieve messages perfectly, also i noticed moving the actual window around on the screen or just closing down skype also lags. I have 16GB of ram and 4.4Ghz Octa-Core CPU, i checked my load while on the high end games and it there was more than enough hardware usage left like normal for skype to run, and skype wasnt taking any extra up than before. I also checked by bandwidth and i was having no problems with that as skype would lag even on offline games. 
I have tried re-installing under a different directory and still the same problem persists, this has only been a problem within the last 24hrs and i haven't installed any other programs that could affect this at the moment.
*UPDATE* I tried downgrading to an older version of skype, 6.3.0.107. Problem Still persists

Similar Messages

  • I just updated my Firefox, and now whenever I use Youtube, I only see black screens where the video should be, but I can still hear the sounds; what gives?

    The Youtube pages load as normal, but as stated above, the player contains only a black screen, and the progress bar moves as usual when playing the clip, but I can only hear, and not see, the actual video.
    Firefox version: 3.6.14
    Windows Vista

    Thanks so much for your reply fanboy20. 
    Yes, just made sure of that.  I do have the latest version of Flash player.  But I have just staggered upon the answer.  Chalk it up to being a newbi.  I was not putting my apple tv to sleep and it would not allow me to see
    you tube on my computer while it was still operating on my TV.  When I realized that, I put the apple tv to sleep and bingo, my computer runs you tube fine.   Thanks again for your response.

  • My mac's screen shuts down after a prolonged spinning wheel but I can still hear the computer whirring which tells me the computer is still functioning what could this problem be.  I cant get onto my computer with a black screen

    I have a an Imac which the screen takes it upon itself to shut down after a prolonged spinning wheel.  The computer is still working as I can hear it.  I cant provide the specs as I cant see anything on my screen what could the problem be and how can I fix it.  I have turned it on and off a couple of times at both the button at the back and unplugged it but this hasnt helped.  Please help

    Spinning wheels are not a facet of Classic operating systems.    Identify your Mac with this tip:
    http://discussions.apple.com/docs/DOC-6413 and post to the appropriate forum: http://discussions.apple.com/docs/DOC-2463 after checking this tip on what may be slowing you down: http://discussions.apple.com/docs/DOC-6921

  • Program monitor freezes and goes black but I can still hear the audio

    Hi just recently I've noticed after a few playbacks the program monitor goes black, the sequence plays out with audio, I just can't see the image. Timeline is mixed with prores, mts But haven't had this issue occur since updating.
    THanks
    I7 3970
    gtx 780 tI
    11TB raid 5

    Hi,
    Are you using CUDA for playback? Try changing the Mercury Playback Engine options and see if it helps.
    Thanks,
    Rameez

  • HT1688 my iphone 4s screen is blank, but i can still hear the notifications :(

    I dont know what to do, i tried restarting it but nothing happens

    When you say restarting, what exactly did you do? Restart is to power the device off by pressing the sleep/wake button and then slide the power off bar.
    A reset, which is what I would recommend first, is to hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot and the screen should come on. You may have to hold 15-20 seconds or more for this to work.

  • Closed website but can still hear the video feed.

    any idea what could be wrong? I opened QVC and watched something. I closed the web browser but I can still hear the program, its driving me nuts. How do I make it stop?
    Post relates to: HP TouchPad (WiFi)

    When in doubt, reboot!  ;-)
    Most glitches can be solved this way.
    Press and hold both the Power switch and center button for at least 15 seconds.  This will restart the device.
    WyreNut 
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

    The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

    If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
    http://www.apple.com/support/ipad/contact/.
    If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
    You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems.

  • I accidently dropped my iphone from about 15 feet in the air, had an otterbox gel case on it but phone will not come on, I can still hear the voice controls and will play music randomly by pushing the center bush on phone any clues on how to get phone wor

    I recently dropped my iphone 4 from about 15 feet in the air, had an otter box gel case on it and it did not break the screen, but it will not come on, no back light but can still hear the voice contorl and randomly hear music when I push the center button, I have it password locked but can't see to unlock, any help out there

    Just guessing here, but dropping your phone is probably the reason your screen or backlight doesn't work.
    Only solution I see is to take it to Apple and buy and out of warranty iphone 4.

  • Blank screen, can still hear the sound though.

    Hey everyone, i took great care of my ipod which i got a while back, after another one had water spilled all over it and died. anyways i went to go listen to my ipod and had a blank screen all of a sudden as if it was really low on battery or something, but i could still hear the music. I checked my serial number and plugged it in on the website, and it said that i am not under warranty. any suggestions? or answers? thanks a lot !

    Are you saying that your iPad's screen is black even though you can hear Siri when you activate her?  Then ...
    first try a reset:
    Hold both the Home button and the Power button down for 10+ seconds until the Apple logo appears.  Let go promptly when it appears, wait 30+ seconds for your iPad to restart.  No information or settings will be lost.
    Now try giving your iPad a friendly thump on the back.
    Place the iPad face down on a bed or your knee and try gently hit it right on the Apple logo on the back of your iPad.  If that doesn't work try thumping it in various places on the back including the corners, and with increasing intensity.
    See this thread for further information and testimonials:
    https://discussions.apple.com/thread/4474708?start=15&tstart=0

  • I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

  • When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • My iPhone 4s screen has gone black but i can still hear my messages coming through but I have also broke the button at the top of my iPhone what should I do?

    My iPhone 4s screen have gone black but I can still hear messages coming through. Also I have broke the button at the top of my iPhone so I can't turn it off and back on again? What should I do?

    Try plugging it it to see if the screen comes on. If not then you're screen is damaged.

  • I dropped my phone and the screen went black but I can still hear when I get a call or text.. How can I fix this?

    Please help! I dropped my phone and the screen went black but I can still hear when I get a call or text.. How can I fix this?

    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • My ipod touch screen is white and i dont know how to fix it i already tried home button and lock and also restarting it but it still is white in the backgroud i can still hear the typing eventhough its all white

    My ipod touch screen is white and i dont know how to fix it i already tried home button and lock and also restarting it but it still is white, in the backgroud i can still hear the typing eventhough its all white

    Try restoring the iPod. First from backup and if problem persists, restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My ipod touch is showing a blank screen but i can still hear, how can i fix that

    My Ipod toush is showing a blank screen but i can still hear, how can I fix that?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

Maybe you are looking for

  • I get an error message everytime i try to open itunes.

    And the meassage reads "The Itunes Library.itl file is locked, on a locked disk, or you do not whave write permission for the file."  what does this mean and how do i fix it? I have uninstalled and then reinstalled and the problem remains.

  • ARCHIVING Object COPAC_****

    Hi All, As we don't have any read program for the Archiving Object COPAC_**** and also we don't have any Info Structure available for this object. Is there any other option available to Verify the data which got archived through this Archiving Object

  • I d/led Photoshop Elements trial and when it finished the d/l it gave me an Error 101

    The installer stated that the extraction process failed, that I should check my HD for space...etc. I am the Admin, it was a personal directory in any case, and I disabled all Virus and Malware detectors for this D/L. Is it possible to just d/l the p

  • Dynadock U3.0 -- blocking other stuff on OS X

    I notice there's no widget in the Mac System Preferences panel for DynaDock U3.0. The driver is installed, but it won't connect me to anything. And if I try plugging my monitors into the Thunderbolt ports on my MacBook Pro, nothing happens. There nee

  • Installing Visual c++ express and plugin wizard

    Hi I am new to SDK and trying to get everything set up so I can begin development of an acrobat plugin in visual c++ studio express 2008. I found the plugin wizard in the acrobat 7 sdk (absent from sdk 8) but I am having difficulty running it. I am g