Director Survey - results are out

Hi all,
I have finally finished collating all the data from the
survey after a
few very intense days of working through all the responses.
There were
227 responses in total. Since the survey gave the respondent
the ability
to choose features rather than giving a specified range from
which they
could choose, it did make it very time consuming to collate.
However, I
hope that the results are more valuable because of this
approach.
The results are at:
http://www.fbe.unsw.edu.au/learning/director/survey/games/
In the top feature request page, I have given the results in
a table as
well as a graph. They are based on a weighted average so
reflect final
order of feature requests based on the responses. You'll
notice that I
have linked many of the feature requests to enable you to see
the
comments associated with them as well as the range of things
covered by
that grouping.
Let me know if anything is unclear (or even if everything is
clear).
Thanks for your participation. And thanks for people that
helped in
other ways, from spreading the word to helping sort the data.
regards
Dean
Director Lecturer / Consultant
http://www.fbe.unsw.edu.au/learning/director/
http://www.multimediacreative.com.au

Richard wrote:
> Now, how can we arrange to tape open Adobe's eyes and
make them read the
> results line by line?
Hi Richard,
I have forwarded the link to Adobe people and the response
has been positive
in that they do appreciate the data. It will be reviewed and
discussed on
their end. Someone (who filled in the survey) asked if I
could let everyone
know what Adobe say after their review of the survey results.
That side of
things may be confidential. But, anything I can share, I
will. Now, when you
see Director 11 come out and read all the new features, if
you see an
overlap with the survey results, I'll take 100% credit for
that ;)
regards
regards
Dean
Director Lecturer / Consultant
http://www.fbe.unsw.edu.au/learning/director/
http://www.multimediacreative.com.au

Similar Messages

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

Dear Customer, It hase come to our attention that your account billing Information records are out of date. That requires you to update your Billing Information. Failure to update your records will result in account termination records... Click on

Dear Customer,
It hase come to our attention that your account billing Information records are out of date. That requires you to update your Billing Information. Failure to update your records will result in account termination records...
Click on the reference link below and enter your login Information on the following page to confirm your Billing Information records..
Verify Now >
Wondering why you got this email?
It's sent when someone adds or changes a contact email address for an Apple ID account. If you didn't do this, don't worry. Your email address cannot be used as a contact address for an Apple ID without your verification.
For more information, see our frequently asked questions.
Thanks,
Apple Customer Support
TM and copyright Â© 2014 Apple Inc. Apple Sales International, Hollyhill Industrial Estate, Cork, Ireland. Company Registration number: 15719. VAT number: IE6554690W.
All Rights Reserved / Keep Informed / Privacy Policy / My Apple ID
Anyone else get this today?
And yep i know this message doesn't go here however the ability to post in general postings to most viewers is lost to me in the ridicules way apple setup there support

It's phishing. Forward it to [email protected] and then delete it.
(118880)

Safari troubleshooting needed. All search results are grayed out preventing me from clicking anything on the page.

Safari Problem: After doing a search using all three of the search engines the search results are grayed out not allowing me to click on anything on the page. I also can't use the buttons to the left of the search box. Please help.

Go back to your home screen, then double click your home button to open your multi-task window hold your finger on the Safari icon until it start to wiggle and a red minus sign is in the upper left corner. Tap the red minus sign and completely close Safari, then reopen it.

Preview: Oracle Certification 2009 Salary Survey Results

!http://blogs.oracle.com/certification/0116.jpg!
Thanks to everyone who participated in our salary survey. We are busy working to compile, summarize and publish the results. The information will be available through the Oracle certification website and I’ll let you know through the Oracle Certification Blog when it is ready.
In the meantime however, I'd like to share some pre-release details that are interesting:
<ol>
<li>Certified professionals earn over 13% more than non-certified counterparts.</li>
<li>Years of experience in a role makes a big difference in overall compensation.</li>
<li>Pay between various job roles (architect, developer, administrator) can be markedly different.</li>
<li>Professionals who have earned more than one Oracle certification earn more than those hold one, and typically - the more certifications that you hold, the more likely you are to earn more.</li>
</ol>
I’ll discuss specific results in more detail when the salary survey results become available, and give my perspective on what it means to certification-holders and those considering certification. 
I look forward to your comments and thoughts!
!http://blogs.oracle.com/certification/Paul-Sig-2.gif!
Paul Sorensen,
Director, Oracle Certification

Hi,
Thank you very much to sharing with us. I also agreed Oracle Certification have important role in the salary.
Awaiting for Oracle Blog & Survey result.
Regards,
Taj
Oracle Database Administrator
Oracle 9i Certified Professional

2009 SAP Upgrade Survey Results

A new survey which was conducted by Panaya, Inc suggests that most SAP customers are moving ahead with their current plans for upgrading their SAP systems to SAP ERP 6.0, despite the economic downturn. 152 European and North American SAP customers and system integrators participated in the survey.
According to the survey, nearly three out of every four projects remain on schedule, and only 11% are delayed beyond 2009. At the same time, 28% of the companies that are not delaying the upgrade are looking to complete the project with a lower budget.
A free copy of the complete survey results is available for download at the Panaya website
[2009 SAP Upgrade Survey|http://www.panayainc.com/sap-upgrade-survey.html]

Hi Kim,
Thanks for your inputs,
I have used CRM_SURVEY_SUITE to create the survey and would like to analyse the same.
I checked the CRM - BW cubes
1. CRM Survey: Results - 0SVY_DATA_1
2. CRM Survey: Answers - 0SVY_ANSWER_TEXT
but the surveys ID are not getting updated .
can you tell me the cubes in which the Survey ID and the results can be updated.
Thanks,
Satish

Captivate 5 Survey Result Question

We are trying to create a Survey in Captivate 5 which will not report out to LMS. I am trying to find a way to get the Survey results (2 Question per slide 18 questions total) to display to the learners. For instance, Slide 1 is A) B) question, slide 2 is 1) 2) question and then starts back with A) B) on Slide 3. I need a total of A) B) 1) 2) for the learners. We are using this in place of a handout if possible. I would assign 1 point for each question and then have them tally at the end for the learners.
Let me know if anyone has any thoughts. I have searched the forum and did not find anything similar. I appoligize in advance if this is answered somewhere else.

Hi Lilybiri,
I can see the confusion. We are not scoring in the sense that this is pass/fail. What we want to do is have the answers tally for the learner. The goal is that if you received 5 - A)'s, 3 - B)'s, 2 - 1)'s and 1- 2)'s those results would display. So if I have a questions such as below:
1. Please pick which best describes you:
A) Easy to work with
B) Difficult to work with
2. Please pick which best describes you:
1) Task oriented
2) Free thinker
The answers selected would then tally up at the end for the learner. The questions repeat with different choice selections between A) B) and 1) 2).
Does that help explain what I am look at doing?
Thanks,
Nicole MacVey-Bogard
Instructional Designer | Enabling Areas Talent Development
Deloitte Services LP
Main: +1 800 335 6488 | Direct: +1 615 882 6642 | Fax: +1 615 750 6642
[email protected] | http://www.deloitte.com
This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is
protected by law. If you are not the intended recipient, you should delete this message.
Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited.
v.E.1

Director Survey - Last Hours

Hi all,
This will be my last post asking for people to do my survey.
My survey
will be closed by the end of this weekend. Current numbers
stand at:
Total started survey: 377
Total Completed Survey: 272
I really wanted to get to 400 and maybe 300 completed. So, if
there is
anyone here that is still on the fence on the survey, please
fill it in.
http://www.deansdirectortutorials.com/survey/DirectorRoadmap/
Thanks.
regards
Dean
Director Next Roadmap Survey
http://www.deansdirectortutorials.com/survey/DirectorRoadmap/
Director Lecturer / Consultant / Director Enthusiast
http://www.deansdirectortutorials.com/
http://www.multimediacreative.com.au
email: [email protected]

Richard wrote:
> Now, how can we arrange to tape open Adobe's eyes and
make them read the
> results line by line?
Hi Richard,
I have forwarded the link to Adobe people and the response
has been positive
in that they do appreciate the data. It will be reviewed and
discussed on
their end. Someone (who filled in the survey) asked if I
could let everyone
know what Adobe say after their review of the survey results.
That side of
things may be confidential. But, anything I can share, I
will. Now, when you
see Director 11 come out and read all the new features, if
you see an
overlap with the survey results, I'll take 100% credit for
that ;)
regards
regards
Dean
Director Lecturer / Consultant
http://www.fbe.unsw.edu.au/learning/director/
http://www.multimediacreative.com.au

Survey results not updated to Application

Hi Experts,
I have created a Survey and Questionnaire in SAP-BIW using "SURVEY COCKPIT" (TCODE : SURVEY).
I have than assigned one Target Group to that survey which is having 3 recepients (e-mail ID's).
When I send the Survey to them the mail is deliverd to recepients with survey form as an attachment, but when they are submitting the Questionnaire/Survey the results are not updated into the system.
I have enabled the setting for Questionnaire as Direct Update into Application.
Still the problem persists. I have also done all the required settings in SICF and SO50.
Please help.
Thanks in Advance.

Dear Nishant
For inspection point you need to import SAMPLE_RESULTS also similar to CHAR_RESULTS. A simple method you can adopt is
First create an inspection lot and record this manualy. Once you have recorded it pass the inspection lot to this BAPI - BAPI_INSPOPER_GETDETAIL. Check the data in this BAPI
The same pattern of DATA has to be passed in the BAPI_INSPOPER_RECORDRESULTS
This is BAPI is running fine for me. Please check and let me know if you have any issues
Regards
Gajesh

CRM Survey result Table

Hello CRM Experts,
We have assigned survey to Transaction ( Activities , Lead , Opportuninity ) . Transaction is being created and Questionnaire ( Survey ) is filled . Then Transaction is saved . Transaction ID is generated . We want name of the Table in which survey Results (answers) are store.
As we get the tables for Questions of surveys.
We not able to find the tables where all surveys Results (i.e may filled by Business Partners,Users etc) are store.
Please suggest.
Regards.
Anup.

HI Anup,
The list of all tables used in surverys are as follows
CRM_SVY_DB_MT                  CRM Surveys: Media Type
CRM_SVY_DB_MTT                 CRM Surveys: Media Types (Text Table)
CRM_SVY_DB_S                   CRM Surveys: Survey
CRM_SVY_DB_SA                  Survey Applications
CRM_SVY_DB_SAD                 CRM Surveys: Survey Application Descripti
CRM_SVY_DB_SD                  CRM Surveys: Survey Description
CRM_SVY_DB_SET                 CRM Surveys: Text Table for CRM_SVY_DB_SE
CRM_SVY_DB_SEV                 CRM Surveys: Input Help Table for Function
CRM_SVY_DB_SFA                 CRM Surveys: Survey File Access
CRM_SVY_DB_SP                  CRM Surveys: Generic Survey Attributes
CRM_SVY_DB_SSC                 CRM Surveys: Survey Schema
CRM_SVY_DB_ST                  CRM Surveys: Survey Template
CRM_SVY_DB_STS                 CRM Surveys: Survey Transformation Select
CRM_SVY_DB_SV                  CRM Surveys: Assessable Survey Values
CRM_SVY_DB_SVS                 CRM Surveys: Survey Values
CRM_SVY_DB_SVT                 CRM Surveys: Survey Value Template
Thanks
Abishek

Insert a Blank Column in the Results Area of a Workbook

Is it possible to insert a blank column in the results area of a WORKBOOK that does not get affected by free characteristic drill down or refreshing of the corresponding query? The current workbook looks like follows
Column A - Characteristic1
Column B - Characteristic2
Column C - KeyFigure1
Column D - KeyFigure2
Column E - KeyFigure3
Column F - KeyFigure4
The requirement is that the user wants to enter some estimates between Column B and Column C and Column D and Column E as follows
Column A - Characteristic1
Column B - Characteristic2
Column C - USER ENTRY
Column D - KeyFigure1
Column E - KeyFigure2
Column F - USER ENTRY
Column G - KeyFigure3
Column H - KeyFigure4
Column I - CALCULATIONS BASED ON USER ENTRY
First I tried to split the results area and save the workbook. But when the query is refreshed then the entire results area gets back in one piece. I succeeded partially by having a key figure with no possible output (i.e., restricting a non-existent value on a characteristic). Again in here, whatever user inputs will get wiped out with the drill down. Does any one have any pointers? Thanks.
IS

Hi IS,
As a nearly workaround I can suppose to do the following.
Create two identical requests.
In the first one hide the columns to the right from your intended new user column. In the second one - hide columns to left.
Knowing the columns number to be shown in each request you can place both request in the same row, but in different columns taking into account that between result areas should be one (or more) additional column.
Data entered by a user will not be wiped out during query refresh or drilldown. Of course, these user data will not conform drilldown operations. So, it is not 100% solution you want.
Another possibility, very hard to implement (if feasible at all), is to write VB code that will monitor user action and will keep data entered by a user somewhere in another sheet and restore them in proper cells after user action (drilldown). But I don't think such coding worth it.
Best regards,
Eugene

RE: Big Log Files resulting in Out Of Memory of serverpartition

To clean a log on nt, you can open it with notepad, select all and delte, add a space ans save as... with the same file name
on unix, you can just redirect the standard input to the file name (e.g.:
# > forte_ex_2390.log
(Should work with nt but i never tried)
Hope that will help
De : Vincent R Figari
Date : lundi 30 mars 1998 21:42
A : [email protected]
Objet : Big Log Files resulting in Out Of Memory of server partition
Hi Forte users,
Using the Component/View Log from EConsole on a server partition triggers
an
Out-Of Memory of the server partition when the log file is too big (a few
Mb).
Does anyone know how to change the log file name or clean the log file of
a server partition running interpreted with Forte 2.0H16 ???
Any help welcome,
Thanks,
Vincent Figari
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]

So try treating your development box like a production box for a day and see if the problem manifests itself.
Do a load test and simulate massive numbers of changes on your development box.
Are there any OS differences between production and development?
How long does it take to exhaust the memory?
Does it just add new jsp files, or can it also replace old ones?

Composite Salary Survey/Survey Results

I'm looking for details information on how to configure Composite Salary Survey and Survey Results infotypes in HR ECM.
Please let me know where can I find detail information.
Thank you in advance.
H

Hi Hetal,
In ECM, you need only the Composite Survey Results (1271) infotype. The Survey Results (1051) infotype is for CM.
Coming to IT1271, this infotype will be automatically maintained for jobs if you are using the Job Pricing BSP. It is too elaborate to write everything down here. Please go through this link:
http://help.sap.com/erp2005_ehp_04/helpdata/en/01/6e083f56e4d861e10000000a114084/frameset.htm
Look under the Job Pricing section for the detailed process.
Cheers,
Donnie

BEx Map in Excel: Print only result area

Hi experts,
I am in BEx Map - Excel, and I am trying to print the result area ONLY, without key figures, legend and so on...
Print Preview in Excel shows the key figures on the left, the legends on the right and a little version of the map (as if way too zoomed out) in the middle.
I know there is a post dedicated to the "print only result area" but its solution is "web only"
Thx,
Olivier

Arun,
Attaching a map in BEx-Excel is different from attaching a chart. When attaching a map, you can't choose in which sheet/workbook the map will be displayed. A new sheet is automatically added to the workbook holding the BEx query, period.
But thx anyway. I did try your thought

Problems with result area in workbooks after upgrade to BW 3.5

Hi,
we are experiencing some problems with our workbooks after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message 'Result area cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
Has anybody had similar problems and has found a solution for this?
Thanks,
EMS

Hi,
I am having that message, always if I delete a Sheet which contains an embeded query.
Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
To find out if this is your case as well,
select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
Regards
Vasso
Message was edited by: VASSILIKI SIAGRI

Director Survey - results are out

Similar Messages

Maybe you are looking for