Disable Conditions Tab or Menu in VA03 T-Code

First of all Thanks to the Forums, which really guided me for a long time, and this is my first post, which I was unable to get the right solution and where I am facing a lot of problems.
Hi Experts,
      I have a situation to, In Va03 T-code for certain, where I need to disable all the Net Value from Item and header tables (VBAK-NETWR), (VBAP-NETWR) .
For this I used MV45AFZZ include from the program(SAPMV45A) of VA03 T-code.
I am able to solve this one, Now my problem is from the VA03 TCODE, when I display the details SO details, after disabling the Net Value, From the Menu Goto>Item>Conditions also displays the Net Value. How to disable this Conditions tab Completely. By disabling the Menu is not the requirement but after entering into the item data, One should not have the access to the Conditions Tab...
Can anyone please suggest me where I need to write the code.
The T-code for the Conditions tab is 'T\05'. I am unable to write th FCODE or SY-UCOMM at the right location.
Please help me ASAP.
Thanks For Reading My Query Completely.
Regards,
Dileep .C  .

Hi
Answer is assumption.
I think you can disable fields using Config also, pls check with your functional consultant
Regards
Madhan

Similar Messages

  • User EXIT to suppress or disable  "Conditions" tab at item level in va02

    hi gurus,
    well i have very urgent requirement to suppress Condotion tab at item level in va02 based upon authority object, did you know where i can disable the function code "T\05" or suppress subscreen.
    my requirement is that when a user press on condotion tab he should not be able to see pricing detail data.
    will reward points for sure
    mandy

    Hi Mandy,
    I think you can do through SHD0 Transaction by creating transaction variants.
    If not possible there could be some customization from SPRO, consult with your functional guy.
    Check this enhancement MV45AFZZ
    PERFORM USEREXIT_FIELD_MODIFICATION, I think in this perform you may disable, check this
    Regards,
    Satish
    Message was edited by:
            Satish Panakala

  • Disabling rows under item conditions tab in VA02

    Dear all,
    I want to disable the rows which are being displayed under item conditions tab in T-code VA02. is there any user exit to resolve the same problem or any other solution is also acceptable.
    help me to find that how i can achieve this. Its Urgent !!!
    waiting for your humble response.
    Thanks in advance.

    Also there is another solution , which i found most feasible coz its only for conditions tab.
    We can write code screen-input = 0 in userexit_field_modification function which is in the include ZSDAUTH01 (programm SAPLV69A).

  • Is there a way to completely disable tabs (removing all tab related menu options) for firefox 10?

    Is there a way to completely disable tabs (removing all tab related menu options) for firefox 10. I hate tabs and recent changes to the menus make incorrect selection of 'open in new tab' when what I want is 'open in new window' a common and unwelcome occurrence.

    You can hide menu items and move them up / down in the menu with the Menu Editor extension. <br />
    https://addons.mozilla.org/en-US/firefox/addon/710

  • Disable or Hide or INACTIVE the CONDITIONS tab in ME22N(Change Pur.Order)

    Hello,
    We want to hide or Inactivate or greyed out all fields of CONDITIONS tab at 'Item Detail Level'  while editing or changing Purchase Order(ME22N) for particular PO type.
    I am not able to find the particular BADI or Enhancement or SCRREN EXITS, so that I can make greyed out all the fields of CONDITIONS tab at 'Item Detail' level while editing or changing Pur.Order(ME22N)
    Regards,
    Mahesh

    Hi Mahesh,
    [http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    [Hide Conditions|Hide conditions in PO;
    Create a transaction variant and try.
    Regards,
    Madhu.
    Edited by: madhurao123 on Aug 9, 2011 9:30 AM
    Edited by: madhurao123 on Aug 9, 2011 9:34 AM

  • Conditions Tab Disabled - Kindly help me

    Dear Experts,
    While i'm creating a Service Process the conditions Tab is with No Fields and it looks grey in Colour. can you pls let me know how can i use the Conditions Tab?
    Pls help me out for Configuration Changes.
    Points will be rewarded for the best solution.
    Srujan

    Hi Srujan,
      Do you have any errors ? What the error says ? If it says Pr Prcdr not determined, then use th efollowing combination in the pr prcdr.
              Check your pricing procedure. Have the Doc Pr Prc + Cstmr Pr Proc + Sales Org + Dstbtn Chnl + Pr Prcdr.  (Ignore Division, if you have used Dummy Division).
                Hope it works, pls dont forget to award points.
    Keerthi

  • How can we add new fields in item customer detail B tab in VA01/VA02/VA03?

    Hi all,
    Anyone can suggest me, how we can add fields in item detail B tab of VA01/VA02/VA03 transaction.
    1) How we can find the screen no and how we can add fileds in it
    2) where we have to write the logic for these fields ( I mean in which include)
    3) Is there any user exit or BADI for this
    4) what is the procedure to do this enhancement .
    5) How we can enhance menu bar
    i am using ECC 6.0 version.
    Please guide me in this .
    Thanks in advance.

    Hi,
      You do not have to do extra coding for this. Just append the extra fields in the table VBAP and include these in the screen 8459 (Additional data A) or 8460 (Additional data B) of program SAPMV45A.
    https://forums.sdn.sap.com/click.jspa?searchID=12244867&messageID=1939475
    Regards
    Kiran Sure

  • RECN: Conditions Tab: Header data for second section not appearing

    Hello,
    Need your kind advise please. I have entered a contract successfully. The contract type is Pay:Rates Payment. The contract has been successfully saved.
    The problem comes when I am trying to display the contract. Here is what's happening sequentially:
    Procedure 1
    1.  I am using TCode RECN and keying in the contract number.
    2. Upon pressing Enter, the General Data tab of the contract is opening.
    3. I am clicking on the icon to change the status from 'display' to 'change'. The mode successfully becomes the 'change mode'.
    4. I am clicking on the Conditions tab and I can see that the screen shows two sections. The top section shows the various conditions that I have created. The bottom section shows the details of the condition for the line item selected from the top section.
    5. I am making the necessary changes and successfully saving the changes made to the contract. Then I am pressing F3 and coming back to the main RECN screen.
    BUT:
    An error occurs when I modify the above procedure slightly.
    Procedure 2
    1. When I am entering the contract once more, the first screen that is opening is the Conditions tab of the contract (quite naturally as this was the last screen that i used just now).
    2. When I am then clicking on the icon to change the status from display to 'change', the system is issuing an error message "Please fill all the mandatory fields".
    3. Upon close examination i am finding that in the bottom section of the Conditions Tab (which is supposed to show the details of the condition on which the cursor has been selected in the top section) the field just above the 5 tabs (ie. Condition, Terms, Calculation, Distribution, Memo) is not populating with the name of the condition on which the cursor has been selected in the top section.
    4. Since this field is a mandatory field, the system naturally throws the error "fill up all mandatory fields".
    The point to be noted is that this field gets perfectly populated when i am following the procedure 1. But in the same contract, this field doesnt get populated and throws the error message when I am following the Procedure 2.
    Request you to please help me understand why in the procedure 2, the field is not getting populated.
    Regards.

    Hello Veman,
    Many thanks for the kind response. However in my case the problem is that when I am trying to go into the 'change' mode for an existing record (which has already been once successfully saved), it is STILL throwing the error message 'fill up all mandatory fields'. The only way to come out of the screen is to press the 'cancel' button.
    What is even more funny is that when I am trying to enter the contract directly using the menu RE Cntract - Change from the first RECN screen, then there is no problem coming.
    My question is WHY is the system throwing that error message when clearly there is no error existing in the record. I believe this will be a programming error. The problem that i am referringto matches very closely to the solution provided vide note number 1291666. The reason why I cant apply this note is because my SAP release is 600 whereas this remedy is for 602, 603 ans 604.
    Regards,
    Suvarghya Dutta

  • Restrict display of Condition Value in the Conditions tab in Purchase Order

    Dear All,
    We have a requirement that in the Conditions tab the condition value column should be displayed as blank to users other than those related to Purchasing and Costing.
    I have checked that there are no standard authorization objects to restrict these.
    Any inputs on how to achieve this?
    Thanks!
    Tejasav

    Hi,
    you can influence fields using BADI ME_PROCESS_PO_CUST. I don't think that you can disable just your field but you should be able to hide whole tab "Conditions". So you can perform your own authorization check in implementation of this BADI and then display or hide tab.
    Cheers

  • How to disable CHARGES tab in Find Sevice Requests(CSXSRISR.fmb / CSXSRISV)

    could any one please let me know how to disable CHARGES tab in Find Sevice Requests ( CSXSRISR.fmb, but funtion registered is CSXSRISV).
    Actually when i access the "Create Service Requests" menu option, the form comes up with a the three TABS (Charges , Work Orders & Maint Req) visible but disabled. But when i access the same from "Find Service Request" menu option, i get the Charges TAB enabled but not the other two... so i would need to visibilly disable the CHARGES TAB like the other two tabs.
    I checked the subfunctions but i could not find any.... i could only find Update Charge and Create Charge options but not the Visible option.

    Hi...
    The Charge Tab in SR form gets enabled only after SR No. Generation.
    So initially when you open the Service Request form the Charges Tab will be visible but disabled, & once the SR number is generated the same gets enabled.

  • How to disable CHARGES tab in Find Sevice Request ( CSXSRISR.fmb ).

    could any one please let me know how to disable CHARGES tab in Find Sevice Requests ( CSXSRISR.fmb, but funtion registered is CSXSRISV).
    Actually when i access the "Create Service Requests" menu option, the form comes up with a the three TABS (Charges , Work Orders & Maint Req) visible but disabled. But when i access the same from "Find Service Request" menu option, i get the Charges TAB enabled but not the other two... so i would need to visibilly disable the CHARGES TAB like the other two tabs.
    I checked the subfunctions but i could not find any.... i could only find Update Charge and Create Charge options but not the Visible option.

    Hi...
    The Charge Tab in SR form gets enabled only after SR No. Generation.
    So initially when you open the Service Request form the Charges Tab will be visible but disabled, & once the SR number is generated the same gets enabled.

  • Disabling the windows xp start button,and disable ALT+TAB

    hi all, i am writing an internet cafe management system, and its required that clients do not access the start button, although it will be visible but will not respond to mouse clicks or keybord events.
    And also how do i disable ALT+TAB when my program is running.
    thanks.

    Event if using vb.net it won't be happen (i think). Why do you want the client did not access the start menu? if you want the client canot access the control panel, why dont just you hide the control panel menu from start menu? (i dont know how to do that, but maybe a little googling will help). Because yesterday, i go on internet cafe and can only access the Program and Shutdown menu.

  • Conditions Tab should not be displayed in the sales order.

    Dear Gurus,
    My client wants to hide the conditions tab (header & item) in the sales order while in display mode.
    Because his dealers should be in a position to see the pricing strucutre.
    Pl guide me how to do this with transaction variant.
    Thanks & Regards,
    Sreehari

    You can create a transaction variant for VA03 and hide the tabs using SHD0.  You can also assign it to a separate transaction code if it meets your requirements.

  • VA02 - Header Condition Tab - Pricing Authorization

    Dear all
    One of my requirement is that, In Sales Order VA02, VA03, VA01  - in Header level Condition tab - I want to hide the Cost Price line only.
    I am able to do that Detail (Item level).
    But header level, it shows the Cost Price.
    Can someone hlep me, how to configure that not to display it based on authorization
    Regards,
    Venkat

    Hi
    Maintain the condition type as header condition as well in SPRO -MM - Purchasing - Conditions - define condition types.
    If you want it to be called in PO automatically then remove tick marks - required and mandatory in calculation schema for that vendor.
    thanks

  • Selecting item in the menu ring will disable in the another menu ring

    hi everyone,
                          I using 8 dialog check box and 8 menu ring (Items 1,2,3,4).If i make the 8 dialog check box 'true' condition the corresponding  menu rings will enabled .In that menu ring  the selected item (1 or 2 or 3 or 4) will disable in the another menu ring.how to get an optimum solution?
                                                      ​    Thanking you,
    Regards,
    Kumar.

    hi devchander,
                          By making any 4 rings with values(1,2,3,4) the disable items property  works correctly in that application . But after make all menu rings value to 0 the other numbers(1,2,3,4) are disable in first click(mouse down event).it appear after the second mouse down event only why? and
    eg:
     rings              values
    ring 1               4
    ring 2               3
    ring 3               1
    ring 4               2
    ring 1              0
    but still  other menu rings are disable the value 1.how i enable it?
    by,
    kumar.
    Attachments:
    121new.vi ‏888 KB

Maybe you are looking for