Disable Error dialog windows in labview
Right now I have a client program that uses dstp in which it trys to read the server, which should always be on, but in the case that its not, i get this ugly error window inwhich it tell me to Stop/Continue. If there is anyway to get rid of this window to have it automaticly continue, but then as well be able to get info from this event and change the value of a boolean (such as an connection error light or even trigger the opening of my own subVI pop up window) I would really like knowing.
Thanks, as always.
-Mark W
Hi Mark,
There are two possibilities here...first, you may have Automatic Error Handling enabled on the VI. You can read the LabVIEW Help to find out more about this feature (available in LabVIEW 7.0 or later). The other possibility is that you have a General Error Handler.vi or a Simple Error Handler.vi on your diagram, and this VI is receiving an incoming error. You can change the "type of dialog" input on either of these VIs to be "no dialog" so that no dialog is generated (although the VI may still do some formatting on the incoming error).
Let me know if any of this is unclear, or if you need any further assistance.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Similar Messages
-
Disable Error Dialogs in LV DSC Engine 6.1
I am having a frustrating experience trying to disable error dialogs on the DSC Tag Engine. My simple goal: to make sure that every time the engine is started, the "Error Dialogs" checkbox (seen in the Engine Manager) is disabled. It should be possible to edit the INI files or use the options menu to disable error dialogs, but it appears that the engine simply ignores these settings. I think it works fine on 6.0.2, but is easily reproducible on my LV 6.1 machine:
1. Run LV 6.1
2. Open the Tag Configuration Editor
3. Create a new, default, empty SCF file
4. From the Tag Configuration Editor, choose TOOLS>OPTIONS and make sure that Enable Error Dialog = False ... this should set an INI setting in lvdsc.ini. If you exit LabVIEW and open it again, LV will properly read the INI file so that this will remain False. That's good.
5. But now start the Tag Engine and double-click on the sys-tray icon to show the Engine Manager. You will notice that Show Error Dialog checkbox is checked (ON).. this means it will show error dialogs. Why is that? I have already siabled error dialogs?
6. So then... un-check the "Error Dialog" box in Engine Manager.
7. Stop and Exit the engine completely (it doesn't matter if you exit LV or not.. you get the same result). Now run the Tag Engine again and open the Engine Manager... You will notice that Error Dialog option is automatically re-enabled (ON).
Note: I am certain the ini files are NOT read-only and that Win2000 has given EVERYONE the FULL CONTROL permission to my LV6.1 folder. I am logged in as Administrator and I installed LV and DSC when logged in as Administrator.
Summary: It is impossible to permanently disable error dialogs in DSC 6.1 ... AND the INI setting "Show Error Dialogs" has absolutely no purpose since the Engine automatically re-enables error dialogs every time you load and run it. In addition, it is not possible to programmatically disable error dialogs.
Question: How can I permanently disable error dialogs on the DSC Engine? If its impossible, how can I programmatically disable it (from a VI)? These INI settings have no effect:
userErrorDialogs=FALSE --- in lvdsc.ini
enableErrorDialog=FALSE --- in DSCEngine.iniJohn Paul,
National Instruments is aware of this problem and should be able to fix it for the next version. The problem is that the setting is stored in dscengine.ini but it is read from the lvdsc.ini. - what a silly bug
The only way to workaround for now would be to create a key in lvdsc.ini in the section [LVDSC] with enableErrorDialog=FALSE.
Hope this help
Roland -
How to supress dialog window "missing fonts"
Hi, i place a RTF file using scripting. When the RTF uses fonts, which are not available a dialog windows appears "missing font: ... substitute fonts..." and the script stops.
How can i supress/disable this dialog window?
Is there are general mechanism to supress dialog windows, when scripts are running?
Thanks!
GerdHi Gerd,
suppress the message with
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
But dont't forget to reset the interaction level before finishing the script:
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
Otherwise you will miss some dialogs in future.
Martin -
after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi 55 KBHi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi 22 KB -
Error 1722 in Windows 7 LabVIEW Installation Application Deployment
Hi,
I am using Application Builder in version 8.5 of LabVIEW to deploy my stand-alone executable. I've never had an issue on Windows XP, and have had many successful installation on Windows 7. However now I have a customer who gets the following error in Windows 7 (but the same installation package works fine for him on XP machines):
Currently Installing NI-DIM 1.7.0f0, Part 10 of 19 with Error 1722.
Error 1722. There is a problem with this windows installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Contiunue Y or N.
Anyone (NI application engineers in particular) have any ideas? (My support contract has expired. I think there is a way to report bugs, but is there a way to contact NI support directly in addition to this forum?)
Thanks for any help.
Ed
Solved!
Go to Solution.UPDATE:
Good news! My customer got back to me and told me it was his anti-virus software (Trend Micro) that caused the error. When he disabled it as I suggested (which I got from a NI knowledge base article on "Error 1722"), the installation was successful.
Thanks all 'till next time...
Ed -
How can I disable "download error" dialog box when saving a complete web page?
Sometimes, when I try to save a web page as type: "Web Page, complete", firefox displays download error dialog box stating a file "could not be saved, because the source file could not be read."
I don't have a problem with firefox couldn't save that file, but I have a problem with firefox displaying that dialog box, because I have to click OK everytime.
Is there a way to disable that annoying dialog box?I modified the host file mainly to block ads. But that's not the problem. It's OK for me for firefox to not saving some parts of a page (ads usually within a frame). It's my intention to NOT saving those files. I just want to save the main content of a webpage.
But I'm having a problem with firefox displaying the dialog boxes. -
Error: Could not complete Create LOV Dialog Window...
Using Jdeveloper 10.1.2 UIX to drop a MessageLovInput onto an Input Form I get the following error:
Could not complete Create LOV Dialog Window because it would result in an invalid document.
Clicking on details reveals the following:
oracle.bali.xml.model.XmlInvalidOnCommitException: Errors
Errors:
Element text not defined in parent contents [node = text ]
invalid subtree:
<contents>
<text text="Find the collection (which contains the legal values for the lovInput) in the Data Control Palette. Select the attribute (of the collection) that will be set by the lovInput and drop it into this space as a 'LOV Table'. " />
</contents>
at oracle.bali.xml.model.XmlModel._validateSubtree(XmlModel.java:2646)
at oracle.bali.xml.model.XmlModel._validateDocument(XmlModel.java:2583)
at oracle.bali.xml.model.XmlModel.precommitTransaction(XmlModel.java:1467)
at oracle.bali.xml.model.XmlModel._validateInCommit(XmlModel.java:2538)
at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:531)
at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:516)
at oracle.cabo.ide.adf.LovModelXml._createLovPage(LovModelXml.java:125)
at oracle.cabo.ide.adf.LovModelXml.createControl(LovModelXml.java:55)
at oracle.cabo.ide.adf.UixModelXml.populateFragment(UixModelXml.java:165)
at oracle.cabo.ide.adf.UixAdfDocumentFragmentProvider.preInitializeNode(UixAdfDocumentFragmentProvider.java:38)
at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider._createDomNodeFromKey(XmlKeyDocumentFragmentProvider.java:97)
at oracle.bali.xml.model.datatransfer.XmlKeyDocumentFragmentProvider.createFragment(XmlKeyDocumentFragmentProvider.java:38)
at oracle.bali.xml.model.XmlModel.getImportedDocumentFragment(XmlModel.java:1771)
at oracle.bali.xml.model.XmlModel.getFragmentForImportIfPossible(XmlModel.java:1801)
at oracle.bali.xml.model.XmlModel.importData(XmlModel.java:1078)
at oracle.bali.xml.model.XmlView.importData(XmlView.java:773)
at oracle.bali.xml.gui.swing.dnd.ModelDropHandler._transferData(ModelDropHandler.java:624)
at oracle.bali.xml.gui.swing.dnd.ModelDropHandler.drop(ModelDropHandler.java:235)
at java.awt.dnd.DropTarget.drop(DropTarget.java:398)
at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:542)
at sun.awt.dnd.SunDropTargetContextPeer.access$800(SunDropTargetContextPeer.java:52)
at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:805)
at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:743)
at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:29)
at java.awt.Component.dispatchEventImpl(Component.java:3494)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:3269)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3123)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Opening the UIX page, the following code has been generated; not a <listOfValues> tag in sight!
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40"
expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>
<!-- Add DataProviders (<data> elements) here -->
</provider>
<contents>
<document>
<metaContainer>
<!-- Set the page title -->
<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<form name="form0">
</form>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>
<!-- Add EventHandlers (<event> elements) here -->
</handlers>
</page>
I have checked Metalink but can't find this error there either. Based on examples on OTN I have tried to create the LOV window manually but it does not work as expected:
1) The window is not empty when opened - i.e. data has been retrieved.
2) The filtering does not work.
3) The selected value does not update the Input Form.
I have pasted the code below in case anyone can point me in the right direction to work around the Jdeveloper error. However, I think Jdeveloper should create the LOV window correctly.
Thanks in advance for your help.
<?xml version="1.0" encoding="windows-1252"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:ctrl="http://xmlns.oracle.com/uix/controller"
xmlns:html="http://www.w3.org/TR/REC-html40" expressionLanguage="el">
<content>
<dataScope xmlns="http://xmlns.oracle.com/uix/ui">
<provider>
<!-- Add DataProviders (<data> elements) here -->
</provider>
<contents>
<document>
<metaContainer>
<!-- Set the page title -->
<head title=""/>
</metaContainer>
<contents>
<body>
<contents>
<listOfValues title="Organization"
searchText="Enter search string here">
<contents>
<!-- indexed children -->
<table model="${bindings.OrganizationView1}" id="OrganizationView13">
<contents>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Name')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Name}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Address')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Address}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Url')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Url}" columns="10" readOnly="true"/>
</contents>
</column>
<column>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OrganizationView1,'Phone')}"/>
</columnHeader>
<contents>
<textInput model="${uix.current.Phone}" columns="10" readOnly="true"/>
</contents>
</column>
</contents>
<tableSelection>
<singleSelection model="${bindings.OrganizationView1Iterator}" text="Select and ">
<primaryClientAction>
<firePartialAction targets="OrganizationView13" source="OrganizationView13" event="select"/>
</primaryClientAction>
</singleSelection>
</tableSelection>
</table>
</contents>
<filterChoice>
<choice name="filterBy">
<contents>
<option text="Name" value="name"/>
<option text="Address" value="address"/>
</contents>
</choice>
</filterChoice>
<headerInstructions>
</headerInstructions>
<searchInstructions>
</searchInstructions>
</listOfValues>
</contents>
</body>
</contents>
</document>
</contents>
</dataScope>
</content>
<handlers>
<!-- Add EventHandlers (<event> elements) here -->
<event name="goto sort" source="OrganizationView13">
<invoke method="handleTableUiEvent" javaType="oracle.cabo.adf.rt.AdfUtils">
<parameters>
<parameter javaType="oracle.adf.model.binding.DCIteratorBinding" value="${bindings.OrganizationView1Iterator}"/>
<parameter javaType="oracle.cabo.servlet.expl.ControllerImplicitObject" value="${uix}"/>
</parameters>
</invoke>
</event>
<event name="select" source="OrganizationView13">
<set target="${bindings.OrganizationView1Iterator}" property="currentRowIndexInRange" value="${ui:tableSelectedIndex(uix, 'OrganizationView13')}"/>
</event>
<event name="lovFilter">
<compound>
<invoke method="setWhereClause" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}">
<parameters>
<parameter javaType="string" value="${empty param.filterBy ? 'NAME' : param.filterBy} LIKE '${param.searchText}'"/>
</parameters>
</invoke>
<invoke method="executeQuery" javaType="oracle.jbo.ViewObject" instance="${bindings.Name.viewObject}"/>
</compound>
</event>
</handlers>
</page>Thanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue. -
"IWD Bus Enumerator disabled" error message in LSC after Windows 8.1 upgrade
Hi there,
I just upgraded my T430 from Windows 8 64-bit to Windows 8.1 64-bit.
After restart, LSC shows an "IWD Bus Enumerator disabled" error message. I went to the device manager, right clicked on IWD Bus Enumerator and selected the "update driver software" option. Message came back that the latest driver is already installed. By the way, in the device manager there are two lines "IWD Bus Enumerator", where the first line is normal (i.e., enabled), and the second line shows that error message (yellow triangle).
What next? Any ideas? My laptop seems to work fine, otherwise.
Best,
Sven
Solved!
Go to Solution.I resolved my issue by going to device manager and selecting View Hidden Devices - then expand System Devices
In my case there were 2 listings for IWD BUS ENUMERATOR - one had the yellow triangle - I uninstalled that one and restarted my laptop and the message was gone. If that does not work make sure you get the latest drivers from Lenovo and also visit Intel.com and search for WiDi - they have some programs to check drivers. -
Empty error dialog when trying to sync (Windows 7 x64 + itunes 9)
Using Windows 7 Enterprise, 64bit and the latest x64 installer of iTunes (9.0.2.25) on a HP EliteBook 8530w.
Whenever I open iTunes, click on my iPhone (3G) and then select the "Info" tab I get an empty error dialogs popping up: See screenshot http://img214.imageshack.us/img214/1582/ituneserror.png
This dialog pops up a couple of times, one after the other. After I've dismissed them all, I can click sync and it appears to actually sync (both the phone and itunes tells me it's synchronizing). However, the empty dialog appears again during sync and once the sync has completed there hasn't been any changes to the phone
What I'm trying to sync is calendar and contacts from MS Outlook 2007. It used to work perfectly on this same computer running XP... it all happened after I re-installed the OS and upgraded to Win7.
I've searched through the internet and found various references to sync problems on vista/win7 on x64 although non of the symptoms seems to match mine (others were seeing bluescreens, frozen itunes etc.). Also, given the verbosity of the error dialog, it's quite hard to know what's wrong...
Has anyone even seen this problem or am I alone with this?I was finally able to make it work. I'm so happy.
For some reason, perhaps it was pure desperation or maybe I had read it somewhere on the internet, I decided to set Outlook as my default mail application. Unbelievably, this made it work - the empty error boxes are gone and synchronization works like a charm.
So, when Outlook asks if it should be default mailer, answer yes. You can also configure this in Outlook or in the Windows 7 start menu -> Default Programs -> Set your default programs -> Outlook.
Just make sure that Outlook is default for everything it wants to be default to. My first attempt set it to "11 out of 13" and it wasn't until I selected to use it to "all file types and protocols that it can handle to default".
Anyway, I'm a happy user now and hopefully this can help others who are experiencing the same issues -
Hi everyone, when i'm getting to select the printer dialog window it doesn't pop up and getting a dump error.
Application has a problem,
Diagnositc file: C:\Program Files\SAP\SAP Business One\Log\SAP Business One_20091126091340.dmp was created.
Please contact support and attached diagnostic file.
Your immediate response is highly appreciated.
Thanks.Hi
Check whether this error is coming while selecting print dilog for specfic document r for all..
If it is coming for specfic doc print then ther is chance is there that PLD might be having some problem, u try with other pld for same & check...if it was not coming then there is problem in Pld only....
If its coming for all , then uprgade to new Patch Level d try. If again its coming then u have to log a Ticket To SAP only.
Giri -
Windows Update Service Disabled - Error 80070422
Hi,
On Windows Vista Ultimate SP1, when I go to Windows Update I see a "Check For Updates" button. When I click it I get an 80070422 error and "Try Again" button which does not work.
I have tried all that is explained in Help on this error, but it's still not working. Let me write in more detail: I opened "Administrative Tools", went to "Services", "Windows Update" service is disabled. I set the "Startup Type" to "Automatic", click on Apply and then I click the "Start" button to start the service. I get an error: 1058: "Windows could not start the Windows Update service on Local Computer", "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it".
I downloaded "WindowsUpdateAgent30-x86.exe" and installed it, hoping that the problem will be fixed, but no luck.
I read somewhere on this forum that a user faced a similar problem and searched in "Windows\System32" for "wu*.*" files and changed the security settings for all of them to allow SYSTEM and Administrators full control and re-registered through "regsvr32" all of the .dll files, but, after doing all of these I still had no luck.
My Windows Update still displays the error 80070422 and when I try to start the Windows Update service I get the error that the service cannot be started and it always sets itself on "Disabled", no matter what I do.
Could someone please help me with this problem? I really don't know what else to do.Wow, great!
I ran the tool that you mentioned and the virus in question was detected as: Trojan.Vundo
Maybe the logs will help some others, too: Here's the log on the first scan:
Malwarebytes' Anti-Malware 1.14
Database version: 808
8:40:22 PM 5/31/2008
mbam-log-5-31-2008 (20-40-22).txt
Scan type: Full Scan (C:\|D:\|)
Objects scanned: 169731
Time elapsed: 42 minute(s), 47 second(s)
Memory Processes Infected: 0
Memory Modules Infected: 1
Registry Keys Infected: 9
Registry Values Infected: 1
Registry Data Items Infected: 1
Folders Infected: 0
Files Infected: 8
Memory Processes Infected:
(No malicious items detected)
Memory Modules Infected:
C:\Windows\System32\byXOHaBU.dll (Trojan.Vundo) -> Unloaded module successfully.
Registry Keys Infected:
HKEY_CLASSES_ROOT\CLSID\{1449fa3b-f8a5-40ec-87da-707e80637ddd} (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Browser Helper Objects\{1449fa3b-f8a5-40ec-87da-707e80637ddd} (Trojan.Vundo) -> Delete on reboot.
HKEY_CLASSES_ROOT\CLSID\{663656df-6bae-460c-a612-8133df519346} (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\aoprndtws (Malware.Trace) -> Quarantined and deleted successfully.
HKEY_CURRENT_USER\Software\Microsoft\affri (Malware.Trace) -> Quarantined and deleted successfully.
HKEY_CURRENT_USER\Software\Microsoft\rdfa (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\affri (Malware.Trace) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FCOVM (Trojan.Vundo) -> Quarantined and deleted successfully.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RemoveRP (Trojan.Vundo) -> Quarantined and deleted successfully.
Registry Values Infected:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ShellExecuteHooks\{663656df-6bae-460c-a612-8133df519346} (Trojan.Vundo) -> Quarantined and deleted successfully.
Registry Data Items Infected:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Authentication Packages (Trojan.Vundo) -> Data: c:\windows\system32\byxohabu -> Quarantined and deleted successfully.
Folders Infected:
(No malicious items detected)
Files Infected:
C:\Windows\System32\byXOHaBU.dll (Trojan.Vundo) -> Delete on reboot.
C:\Users\Shere Khan\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\LK0KREDB\kb516107[1] (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\fccywwts.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\gEwtTLFy.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\yayvSiHb.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\_Shere_Quarantine\fmsnvygd.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\byXnMghG.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\byXPfgfe.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
Here's the log on the second scan, after a restart:
Malwarebytes' Anti-Malware 1.14
Database version: 808
9:48:01 PM 5/31/2008
mbam-log-5-31-2008 (21-48-01).txt
Scan type: Full Scan (C:\|D:\|)
Objects scanned: 168808
Time elapsed: 56 minute(s), 31 second(s)
Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 0
Registry Values Infected: 0
Registry Data Items Infected: 0
Folders Infected: 0
Files Infected: 2
Memory Processes Infected:
(No malicious items detected)
Memory Modules Infected:
(No malicious items detected)
Registry Keys Infected:
(No malicious items detected)
Registry Values Infected:
(No malicious items detected)
Registry Data Items Infected:
(No malicious items detected)
Folders Infected:
(No malicious items detected)
Files Infected:
C:\Windows\System32\byXOHaBU.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
C:\Windows\System32\dqhreobq.dll (Trojan.Vundo) -> Quarantined and deleted successfully.
On the third scan, no other infections were found. The files and locations and one or two registry entries are similar to what I suspected was not allright, so I guess the (right) virus has been found and eliminated. Have enabled Java in FireFox and everything seems fine, haven't touched Internet Explorer just to be on the safe side so I can't say anything about that, but everything looks allright. Seems this was the problem. Thanks again, mate, your post was a life saver. -
How to keep showing external dialog window in foreground of labview window
hi,
i have run .exe file from my labview using exce.vi. It wokrs too. but i have problem with dialog window from .exe file.if i run .exe file using command line it appears a dialog window named for example 'START' if i pressed yes or No then again appears new dialog window and so on till finished.But problem is the first dialog window appears foreground of my labview and then others background (suppresed).to do further at first i have to minimized my labview window.how could i keep showing that dialog window always foreground of my labview??Thanks.
Solved!
Go to Solution.You could add code to your LabVIEW program to detect each new dialog, and to bring it to the front. I grabbed the following two links from a similar post, either link shows how to programmatically bring a window (LabVIEW or not) to the front:
https://decibel.ni.com/content/docs/DOC-4745
https://decibel.ni.com/content/docs/DOC-4551
Matt Kirk
Inventor of ImageJVI -
I have created a vi that uses the LV-GPIB and database connectivity vis. The program runs fine and it ends execution by running the "Close Database Connection.vi".
After closing out my front panel windows and exiting LabVIEW 6.1, I get an error dialog box that reads the message "The exception Privileged instruction (0xc0000096) occured in the application". What does this error mean and how do I resolve it?
Thanks,
TafHi Taf,
Given the broad scope of your application, it may be best to try and isolate the problem down by taking out parts of your application and simplifying it down as much as possible until you can get a consistent version that throws this exception. I would first try to take out either the GPIB or database connectivity portions of the application to narrow down our problem. This error generally occurs when accessing DLLs and external applications, so I wouldn't be surprised if it's the GPIB or database. Let's try to see exactly which one it is and then we can dig deeper into that part of the code. Thanks for your cooperation!
Jeremy L.
National Instruments
Jeremy L.
National Instruments -
Oracle Apps R12 Installation error on windows
This new discussion is related to below link as last times discussion is locked ,i dont have idea why that discussion is locked(might be due to attachment link that i provided for log file )
"R12 E-Business suite installation error on Windows XP-SP3"
I have added 4 GB RAM and started installation on new fresh windows XP SP3 system with only one C: drive with 300 GB space(including staging area)
below is the log file for error
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Sun Jan 12 14:57:39 IST 2014
>> Rapid Wizard source location : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : utkarsh.sparsh
Host Operating System : Windows (32-bit)
User running Install : Uday Gite
=================================================================
InstUpgPanel
User action : Install Oracle Applications
Install type : Standard Install
Disabling OCM Configuration
InstallPanel
User action : Create configuration
Description : Creates a new instance configuration.
PortPanel
Selected port pool:
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
DBNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Writing configuration file to: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Writing configuration file to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Setting temp directory to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
Port Availability Check :
-- database node ports --
Database Port available: Port Value = 1521
Database Port Value = 1521...... Available
DB ONS Local Port available: Port Value = 6300
DB ONS Local Port Value = 6300...... Available
DB ONS Remote Port available: Port Value = 6400
DB ONS Remote Port Value = 6400...... Available
-- apps node ports --
RPC Port available: Port Value = 1626
RPC Port Value = 1626...... Available
Web SSL Port available: Port Value = 4443
Web SSL Port Value = 4443...... Available
ONS Local Port available: Port Value = 6100
ONS Local Port Value = 6100...... Available
ONS Remote Port available: Port Value = 6200
ONS Remote Port Value = 6200...... Available
ONS Request Port available: Port Value = 6500
ONS Request Port Value = 6500...... Available
Web Listener Port available: Port Value = 8000
Web Listener Port Value = 8000...... Available
Forms Port available: Port Value = 9000
Forms Port Value = 9000...... Available
Metrics Server Data Port available: Port Value = 9100
Metrics Server Data Port Value = 9100...... Available
Metrics Server Request Port available: Port Value = 9200
Metrics Server Request Port Value = 9200...... Available
JTF Fulfillment Server Port available: Port Value = 9300
JTF Fulfillment Server Port Value = 9300...... Available
MSCA Server Port available: Port Value = 10200
MSCA Server Port available: Port Value = 10201
MSCA Server Port available: Port Value = 10202
MSCA Server Port available: Port Value = 10203
MSCA Server Port available: Port Value = 10204
MSCA Server Port available: Port Value = 10205
MSCA Server Port Value = 10200-10205...... Available
MSCA Dispatcher Port available: Port Value = 10800
MSCA Dispatcher Port Value = 10800...... Available
Java Object Cache Port available: Port Value = 12345
Java Object Cache Port Value = 12345...... Available
OC4J JMS Port Range for Oacore available: Port Value = 23000
OC4J JMS Port Range for Oacore available: Port Value = 23001
OC4J JMS Port Range for Oacore available: Port Value = 23002
OC4J JMS Port Range for Oacore available: Port Value = 23003
OC4J JMS Port Range for Oacore available: Port Value = 23004
OC4J JMS Port Range for Oacore Value = 23000-23004...... Available
OC4J JMS Port Range for Forms available: Port Value = 23500
OC4J JMS Port Range for Forms available: Port Value = 23501
OC4J JMS Port Range for Forms available: Port Value = 23502
OC4J JMS Port Range for Forms available: Port Value = 23503
OC4J JMS Port Range for Forms available: Port Value = 23504
OC4J JMS Port Range for Forms Value = 23500-23504...... Available
OC4J JMS Port Range for Home available: Port Value = 24000
OC4J JMS Port Range for Home available: Port Value = 24001
OC4J JMS Port Range for Home available: Port Value = 24002
OC4J JMS Port Range for Home available: Port Value = 24003
OC4J JMS Port Range for Home available: Port Value = 24004
OC4J JMS Port Range for Home Value = 24000-24004...... Available
OC4J JMS Port Range for Oafm available: Port Value = 24500
OC4J JMS Port Range for Oafm available: Port Value = 24501
OC4J JMS Port Range for Oafm available: Port Value = 24502
OC4J JMS Port Range for Oafm available: Port Value = 24503
OC4J JMS Port Range for Oafm available: Port Value = 24504
OC4J JMS Port Range for Oafm Value = 24500-24504...... Available
OC4J AJP Port Range for Oacore available: Port Value = 21500
OC4J AJP Port Range for Oacore available: Port Value = 21501
OC4J AJP Port Range for Oacore available: Port Value = 21502
OC4J AJP Port Range for Oacore available: Port Value = 21503
OC4J AJP Port Range for Oacore available: Port Value = 21504
OC4J AJP Port Range for Oacore Value = 21500-21504...... Available
OC4J AJP Port Range for Forms available: Port Value = 22000
OC4J AJP Port Range for Forms available: Port Value = 22001
OC4J AJP Port Range for Forms available: Port Value = 22002
OC4J AJP Port Range for Forms available: Port Value = 22003
OC4J AJP Port Range for Forms available: Port Value = 22004
OC4J AJP Port Range for Forms Value = 22000-22004...... Available
OC4J AJP Port Range for Home available: Port Value = 22500
OC4J AJP Port Range for Home available: Port Value = 22501
OC4J AJP Port Range for Home available: Port Value = 22502
OC4J AJP Port Range for Home available: Port Value = 22503
OC4J AJP Port Range for Home available: Port Value = 22504
OC4J AJP Port Range for Home Value = 22500-22504...... Available
OC4J AJP Port Range for Oafm available: Port Value = 25000
OC4J AJP Port Range for Oafm available: Port Value = 25001
OC4J AJP Port Range for Oafm available: Port Value = 25002
OC4J AJP Port Range for Oafm available: Port Value = 25003
OC4J AJP Port Range for Oafm available: Port Value = 25004
OC4J AJP Port Range for Oafm Value = 25000-25004...... Available
OC4J RMI Port Range for Oacore available: Port Value = 20000
OC4J RMI Port Range for Oacore available: Port Value = 20001
OC4J RMI Port Range for Oacore available: Port Value = 20002
OC4J RMI Port Range for Oacore available: Port Value = 20003
OC4J RMI Port Range for Oacore available: Port Value = 20004
OC4J RMI Port Range for Oacore Value = 20000-20004...... Available
OC4J RMI Port Range for Forms available: Port Value = 20500
OC4J RMI Port Range for Forms available: Port Value = 20501
OC4J RMI Port Range for Forms available: Port Value = 20502
OC4J RMI Port Range for Forms available: Port Value = 20503
OC4J RMI Port Range for Forms available: Port Value = 20504
OC4J RMI Port Range for Forms Value = 20500-20504...... Available
OC4J RMI Port Range for Home available: Port Value = 21000
OC4J RMI Port Range for Home available: Port Value = 21001
OC4J RMI Port Range for Home available: Port Value = 21002
OC4J RMI Port Range for Home available: Port Value = 21003
OC4J RMI Port Range for Home available: Port Value = 21004
OC4J RMI Port Range for Home Value = 21000-21004...... Available
OC4J RMI Port Range for Oafm available: Port Value = 25500
OC4J RMI Port Range for Oafm available: Port Value = 25501
OC4J RMI Port Range for Oafm available: Port Value = 25502
OC4J RMI Port Range for Oafm available: Port Value = 25503
OC4J RMI Port Range for Oafm available: Port Value = 25504
OC4J RMI Port Range for Oafm Value = 25500-25504...... Available
OS User and Group Check
Domain=UTKARSH
,Username=Uday Gite
,PC-Name=UTKARSH
User belongs to the Administrators Group.
Port Uniqueness Check :
-- database node ports --
-- apps node ports --
All ports are unique.
File System Check :
-- database node mount point --
Database ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database ORACLE_HOME admin folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\temp
Database Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh
Database Install Out Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
Database Install Out Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\clone\\
Database System File Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Log File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Transaction File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Archive File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database OraInventory File Directory created:
Mount Point = c:\temp
-- apps node mount point --
APPL_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP admin created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl\admin
APPL_TOP mount 2 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 3 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 4 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
COMMON_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
JAVA_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn\java\classes
Temp Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
APPL_TOP admin Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\admin\log
Apps ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
Tools ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3\appsutil\clone\\
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2\appsutil\clone\\
Apps ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Tools ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Writing configuration file to: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
required = 5600.0
actual = 249592.6953125
Disk space on system acceptable:
Database System File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 20200.0
actual = 243992.6953125
Disk space on system acceptable:
Database Log File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 950.0
actual = 223792.6953125
Disk space on system acceptable:
Database Transaction File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 103350.0
actual = 222842.6953125
Disk space on system acceptable:
Database Archive File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 64500.0
actual = 119492.6953125
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 5800.0
actual = 54992.6953125
Disk space on system acceptable:
APPL_TOP mount 2 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 2800.0
actual = 49192.6953125
Disk space on system acceptable:
APPL_TOP mount 3 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 8400.0
actual = 46392.6953125
Disk space on system acceptable:
APPL_TOP mount 4 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 3100.0
actual = 37992.6953125
Disk space on system acceptable:
COMMON_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
required = 3200.0
actual = 34892.6953125
Disk space on system acceptable:
Apps ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
required = 1400.0
actual = 31692.6953125
Disk space on system acceptable:
Tools ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
required = 1400.0
actual = 30292.6953125
Disk space on system acceptable:
Temp Directory = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
required = 1024.0
actual = 28892.6953125
Host/Domain
command: ping -n 1 utkarsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has succeeded
command: ping -n 1 utkarsh.sparsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has succeeded
System Utilities
command: cmd.exe /c C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\OracleApps\Cygwin\bin C:\OracleApps\VIS2008\VC\bin
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/cygdrive/c/WINDOWS/system32/cl
'cc' is available.
/usr/bin/link
'link' is available.
ERRORCODE = 0 ERRORCODE_ENDThe system cannot find the path specified.
System Utilities Availability test has succeeded
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
DoInstallPanel - User continued install at warning dialog.
Starting from Rapid Install Full Stage area C:\OracleApps\stageR12\oraDB\Disk1
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
Database ORACLE_HOME: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database SID: FPRD1
Database Context Name : FPRD1_utkarsh
Creating DB Context: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
APPL_TOP location: C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
Database SID: FPRD1
APPL_TOP Context Name : FPRD1_utkarsh
INST_TOP location: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh
Creating Apps Context: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Total number of processes in Current Install 5
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Creation of Directory - C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh Succeeded.
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrun11g.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrun11g.cmd
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrundb.cmd
Step 0 of 5
Command: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
Processing Step 1 of 5
Executing: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM $Header: adrun11g.cmd 120.11 2009/03/11 21:22:03 marderiu noship $
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set date=Sun 01/12/2014 )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set time=03:05 PM )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_PATH=C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\java;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;C:\OracleApps\stageR12\startCD\Disk1\ra"R12 E-Business suite installation error on Windows XP-SP3"
Your OS is not supported.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) (Doc ID 761567.1)
Log file located at C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh\ApplyDatabase_01121856.log
Any details about the error in this log file?
Please review log files mentioned in (How to locate the log files and troubleshoot Rapid Install for Release 12.0.x and 12.1.x (Doc ID 452120.1)) and upload them in one zip file to any free hosting website and post the link here. Please do NOT copy/paste the contents of the log files in this thread.
Thanks,
Hussein -
NI Variable Engine (tagsrv.exe) Runtime Error Dialog Upon Restart -- Resolved
After installing LabVIEW 2009, I started getting an error dialog when I restarted, and shared variables stopped working. So, I figured I'd post what I did to resolve it.
For forums searchability, here's the text:
Dialog Window Title:
Microsoft Visual C++ Runtime Library
Dialog Window Text:
Runtime Error!
Program: ...gram Files\National Instruments\Shared\Tagger\tagsrv.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information
=======
Here's the dialog:
I also noticed that the NIVE (National Instruments Variable Engine) service timed out when I manually tried to stop it.
So, I:
* Closed out of everything, opened Distributed System Manager 2009, and removed all processes (except for "System", of course)
* Restarted the PC
Visual C++ Runtime error is gone!
Message Edited by LabBEAN on 11-11-2009 10:02 AM
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type DefsSorry to hear that. I've been there a few times myself. While you're going through that process, consider uninstalling EVERYTHING NI through Control Panel » Add Remove Programs. Running msiBlast (attached below) can clean out anything you missed.
As a last resort, you could call NI support (if you have support) and at least allow them to probe around. At a minimum, they can document this internally so maybe it's fixed at some point. If you go that route, request a CAR number and post it back here if they give you one.
Message Edited by LabBEAN on 04-23-2010 05:39 PM
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type Defs
Maybe you are looking for
-
MY CREATIVE ZEN V PLUS 8GB DEAD!!! PLZ H
can anyone help my mp3 player seems to be dead, it wont even turn on...i tried charging it to see if the battery was dead but its not even turning on....can anyone please help me....its really urgent!!!!Message Edited by jayat on 08-7-200706:07 PM
-
Laserjet 4200 drivers for Windows 7 64bit
ok...ive upgraded to Windows 7 64bit to test on our network and come to find HP is lacking on the drivers for my laserjet!!! I need a solution for this. thank you
-
Hyper V Cluster Migration - Options
Hello, I have a Server 2012 4 node cluster that i need to migrate to new hardware along with all the VMs. The new hardware will be a 2 node Server 2012 R2 cluster. Can i please have some advice on my migration options? I am using iSCSi SAN storage bu
-
Some users have a similar problem to this, but if FireFox is already open the link from their mail client will activate in FireFox. For me, once I click a link in an email, FireFox immediately becomes the active application, but nothing further happe
-
I have an error when join pc's to domain windows server 2012 r2
Hello everyone I have a problem to join computers to the domain. I'm doing the procedure is as follows. 1.'ll properties pc 2. I click Change to join the domain. 3. I request the domain administrator credentials 4. I get the window that has joined th