Disable G722 Advertisement for Call Recording/Monitoring

I'm troublshooting some call recording/monitoring issues and have come across many steps that reference disabling the "Advertise G.722 codec" in Enterprise Parameters for call manager.
Contact Center itself can only operate in G711 or G729 and I've validated when agents are on a call with their UCCX extension that they are using the G711 codec. Since UCCX cannot operate at G722 and my agents are taking calls are using G711, what is the reason why the G722 codec advertisement needs to be disabled?
Thanks.

Hi Paul,
It's not the G722 to UCCX that you need to worry about, because the IP Phone will negotiate G711 and not G722. Both parties have to support it in order for it to be used. An example of this is an IP Phone calling a UCCX trigger and interacting with a script.
However, it's the internal calls to Agents that you need to worry about. An example of this is an internal employee calling the Help Desk and speaking to an Agent. At this point, the two IP Phones will negotiate G722 and when the UCCX system tries to monitor or record that conversation, it cannot.
UCCX can only mon/rec G729 or G711. Therefore, if you didn't care about UCCX based mon/rec, then leave G722 enabled. It doesn't break your UCCX as a whole, it only prevents you from mon/rec those specific calls. Calls inbound from the PSTN would likely be G711, and would still work for mon/rec.
Does that make sense?
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.
EDIT: Added some more clarity.

Similar Messages

Call Recording/Monitoring in UCCX7

Hello, we are getting ready to upgrade to CUCM 7.1 and UCCX 7.0 and I have a question. Does call recording and monitoring work the same in this version as it does in version 4.1. We are in a Citrix environment and currently use spanning to get the voice traffic.
From what I've read, it appears to work the same in 7, but I just wanted to double check.
Thanks!

Hi,
Yes, you can use Rspan Monitoring in the UCCX 7.0 it will work and configured in the same way as it is in UCCX 4.0
Regards,
Tere.
If you find this post helpful, please rate!

No call recording option in lumia 720

I wanted a call to be recorded in my Lumia 720 but i couldn't.there is only one app for call recording and that too doesn't work in Lumia 720.how can I record a call.plz help me out.

We suggest counting your votes to this existing feature suggestion: https://windowsphone.uservoice.com/forums/101801-feature-suggestions/suggestions/2290207-call-record...

Cisco Unified WFO - Call Recording and Quality Management stops recording with conferenced translator

I'm having an issue whenever one of our employee's conferences in an external translator, as soon as they bridge the customer into the call with the translator QM stops recording. I can hear the intial conversation with the customer, and then the employee put the customer on hold and call the translator service. Only when the two are bridged together the call always stops recording.
We are performing all recording on the server side, and are not using Quality Manager Desktop agents.
Any help would be much appreciated. Thanks!
-Chris

So I found the following information listed below. I don't manage the Cisco Unified CM portion of our telco system. Can we limited the ourselves to a single Codec, and would this even resolve the issue. Does this cause other issues if we didn't limit the devices that are recording to a single codec?
Recording IssuesThis topic explains how to diagnose and resolve problems that occur with contact
recordings.
Calls for devices configured for Network Recording drop when you try to conference
or transfer a call.
Symptom. When you try to transfer or conference a call and one or more devices on
the call configured for network recording, the transfer or conference fails and
parties drop off of the call.
Cause. Cisco Unified CM does not support codec changes for devices that are
configured for call recording. The codec must remain the same throughout the life
of the call. For conference calls, the conference bridge must support the codec
used before the conference completes.
Solution. Update the Cisco Unified CM configuration to ensure that no codec
changes occur for network recorded devices.

Call recorder for iphone 5s

i am having a iphone 5s which i am looking for a call recording app for voice calls..

There are many call recording apps (for example, we are developers of such apps ). However, as KiltedTim says, such apps are not tied into the core dialing feature of iPhone but are implemented through one of the two ways:
1 - VoIP based recording: the app will use your internet connection to connect your phone to the app's server, which in turn will connect you to the recipient phone. It's convenient to use but you must use the app's dialer to make the phone call so only outgoing calls are supported.
2 - Conference call (3-way call) recorders: the idea is making a conference call with 3 'participants' - you, the person you want to record, and another phone number that actually makes the recording. This phone number is provided and managed by the app. This method supports recording of both incoming and outgoing calls but it's a bit uncomfortable to make the merging of the call with all the participants.
Regarding the legal issue, each country/state has its own set of rules for phone recording. In some countries a single participant consent is enough, some countries require both participants, some have different rules for recordings that are shared vs private recordings. Our apps include a feature to play 'beep' sound every minute, to inform the other party that the call is recorded. You can use it or disable it as required by the law in your country/state.
My company have two apps - 'Call Recorder - IntCall' is based on VoIP and CallRec Lite - Record Phone Calls is based on conference calls. You can find a comparison of both apps here - although it's a comparison of our apps most of the sections are relevant for all apps that are based on those two methods so you can learn a bit more about the pros and cons of each method.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
<Edited by Host>

Jabber for Window, phone mode, how to disable "use my computer for calls"

We have a Citrix environment and only want to control the Cisco deskphone with Jabber for Windows in the phone mode.
We use CUCM 8.6.2 and I have installed Jabber for Windows 9.7.0 and all works fine, I can control my deskphone, make and receive calls, phonebook and Outlook integration works fine.
Is it possible to disable "use my computer for calls" as we do not want users to make calls via Citrix, but only use the deskphone for this.
Thanks, Perry

Hi Matthias,
Soft-phone mode cannot be disabled. Supported Features on Virtual Environment are the following.
Supported Features
    Instant messaging and presence with other Cisco Jabber clients
    Desk phone control
    Voicemail
    Presence integration with Microsoft Outlook 2007, 2010 and 2013
We have an existing defect which is in Terminated state because feature is not supported hence cannot be fixed.
CSCub40605 - J4W - Ability to disable softphone mode in Citrix environment.
HTH,
Please rate if you find this post helpful.
Regards,
Mohammed Noor

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

Looking for a Telephone call recorder app

I have tried a few telephone call recorder apps on my droid X and they just don't seem to work. They are great when the Doctor calls with test results when you are driving.

There are lots of different recording applications on the Android Market Place.
You can go to the Android Market Place on the device, then go to search to find these applications.
Here are two of the higher rated call recording applications:
Phone Recorder
Android Recorder
Android Market Place Applications are not provided by Verizon Wireless and direct support for applications is not offered.

How to call webservice for each record in a table using ODI

Hi
I am new to ODI and Webservice. I want to invoke a scenario in ODI using web service. I hava a weblogic application server with axis 2 deployed.
But I want call webservice for each record in a table
For eg: "EMP" table have 50 records, for each record web service should invoke
Can any one help me on it.
Thanks,
phani
Edited by: user12774166 on Jun 6, 2010 11:16 PM

If your goal is "call" a web service, Jason's Straub's [flex-ws-api|https://flex-ws-api.samplecode.oracle.com/] is by far the best I've seen. You might want read more about it on [his blog|http://jastraub.blogspot.com/search?q=+flex_ws_api+].
Tyler Muth
http://tylermuth.wordpress.com
[Applied Oracle Security: Developing Secure Database and Middleware Environments|http://sn.im/aos.book]

Is there any way of recording a voice message for call waiting?

Hi,
I currently have the call waiting system set up on my iPhone, so i can see when other people are trying to call me whilst already on a call.
However i would like the caller to know that i'm aware of their call so was wondering if there is an app or any software where i am able to record a voiceno

What I'm saying is call waiting is a carrier feature so a recording to interrupt the incoming call while you continue to talk likely would have to be implemented by the carrier. I don't have a recorded message for call waiting but call your carrier to find out if they offer such a feature.

Audio & Video Call Recording Solution for CUCM

Hi,
I am looking for a audio and video call recording solution for CUCM. The requirement is the recording system shall record all audio & video calls including incoming, outgoing, and station-to-station calls. One cirtical requirement is: The users on the CUCM system shall be able to record video calls for video equipped stations with a push of a button on their Cisco IP Desk set or their Cisco soft phone.
Does anyone know the product or third party vendor who supports audio and video recording for CUCM?
-Thanks
Vaijanath

Currently Cisco doesn't support video recording with a push of a button on their Cisco IP Desk set or their Cisco soft phone. Also, I have checked with the third party vendors and they only support the video recording using Passive Call recording (port mirroring).
http://www.verba.com/cisco-call-recording-solutions

Disabling the dropdown LOV for existing records in SQL updateable report

Hi All -
I have a SQL updateable report which has 3 columns. One of the column is a named-LOV. This report also provides the functionality of inserting new rows.
Is there a way to only show the named-LOV dropdown list for only the new records to be inserted i.e. when we click on "Add Row". For existing records, I donot want to show the dropdown.
Please provide your thoughts.
Thanks,
-Seenu

Thanks Robert -
I guess I didn't put my question right in my earlier posting.
Basically this report provides updates and inserts both (Its a SQL Updateable report)
One of the column is a Named-LOV (select list dropdown). For the existing records shown in this report, this select list should be disabled. But for the new records while inserting a new row into this report, the select list dropdown should be shown to the user with an option to choose values from selectlist.
Thanks,
-Seenu

Thank you. Save or print this page for your records. We'll also send you an email confirmation. Case ID: 421912520 You have chosen to call Apple later. When you're ready, call the phone number below during business hours and refer to your Case ID for fas

Thank you.
Save or print this page for your records. We'll also send you an email confirmation.
Case ID: 421912520
You have chosen to call Apple later. When you're ready, call the phone number below during business hours and refer to your Case ID for faster support.
1-800-MY-IPHONE
6:00 a.m. to 11:00 p.m. Central
iPhone
Restore or update not working as expected
You can review this case in the Cases & Repairs section.
Additional Resources
Return to Apple Support home.
Visit your Support Profile.
Create another support request.
Your contact information
Onechai John
<Email Edited by Host>

They already have your number and/or email address and maybe have sold it several times already to others as well. They also use number generators - software that will automatically create them - some work and some don't, they don't care, they send out millions and a few will fall for it and send them money. The only way to "hide" would be to change both and your password, but then it would happen again at some point.

Error, we detected a failure loading the advertisement for you to complete BrandBoost. Please disable any ad blockers and try again.

Error
We detected a failure loading the advertisement for you to complete BrandBoost. Please disable any ad blockers and try again.
I was playing Family Feud on Facebook)
How do I disable any blockers.

Despite the message does the site work? If so I'd ignore the messages. From the name of the site, perhaps you want to see the advertisements.
The most popular adblocking is the "Adblock Plus" extension which you can disable with the "ADP" toolbar button or in the extensions options in Tools -> Addons -> extensions.
Adblock Plus - Open blockable items list - Ctrl+Shift+V (right click on icon) shows all the urls on a page and if blocked by a filter shows the filter
* http://img213.imageshack.us/i/2010020591647pm.png/
* http://img651.imageshack.us/i/adpblockableitems.png/

Calling Procedure for each record ?

Hi,
I am using a procedure in a mapping.
I defined the procedure which is having 4 out parameters.
I am assigning these default values to the tables in a mapping.
When I see the generated code in a mapping, I observed that, the procedure is being called for each record.
But actually, its enogh to be called only once.
Could any one please help me, how can I restrict the procedure calling for each record.
Any help would be greatly appreciated.
Thank you,
Regards,
Gowtham Sen

Hi,
U can use MAP-INPUTS operator to give the inputs to the procedure and use a PRE_MAPPING operator to call the procedure. this way even if u feel u want to make the mapping running thru an scheduler u can still use it without changing the code.
Regards
Bharath

Disable G722 Advertisement for Call Recording/Monitoring

Similar Messages

Maybe you are looking for