Disable user menu

Hello,
If I assign a role to a user, then the user menu will reflect the role menu.
How do I disable the user menu, meaning he should not see the Tcodes/reports in the SAP initial screen?
Thanks in advance.
Vijay

The other possible method, which i prefer, is to have the tcodes added as Authorization Default rather than a transaction. This would still enable to have all the auth objects checked for the tcode to be embedded in the role including S_TCODE. You would see it in the role with a different icon but when the user log in, they would not see it in the menu.
This is the approach i take when we have to add any dependent transactions to the role but not visible to the user. As an example, the Time Entry tcode CAT2 triggers the Trave Mgmt tcode PR05 but the users do not need to see this later tcode in their menu.
Hope this answers your question.
Thanks
Sarada

Similar Messages

  • Disable User Menu button is LSMW

    Hi everyone,
    can any one please tell me how to disable "User Menu" button in lsmw transaction.

    I took a look at the program,  and it does not use any kind of customizing to build the gui-status.  So, in other words, you can not turn it off using config.  You may be able to do it useing a screen variant.  Check out transaction SHD0.
    Regards,
    Rich Heilman

  • Disable User Menu button

    Hello guys,
    Does anybody know how to disable de user menu button in BW 3.5?
    I only want the SAP Menu button enable.
    Best Regards,
    João Arvanas

    hi joao,
    use this link
    http://www.sap-img.com/basis/hide-the-user-menu.htm
    with hopes
    Raja Singh

  • How to disable the Super User menu - (Right click windows icon menu) - Server 2012 R2 - RDS

    Greetings all,
    Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
    Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
    Hope someone can help.
    Terry

    Hi Terry,
    You can try following points, might helpful in your case. Go to 
    C:\Users\Default\AppData\Local\Microsoft\Windows 
    there you will see file called WinX 
    Right click this file and copy then go to
    C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows 
    then paste the file into the folder.
    NOTE: replace YOUR_USERNAME with your actual username. 
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • User Menu Disabled

    Hello,
    The User Menu for a particular User is disabled.
    He can only see the SAP Menu.
    How to enable the User Menu?
    Thanks in advance

    Hi Gautam,
    The best way to do this, is to go back and close all the threads which you have started and then use the <a href="https://forums.sdn.sap.com/search.jspa?threadID=&q=usermenudisabled&objID=f208&dateRange=all&numResults=15&rankBy=10001">search</a> before asking questions which have already been answered.
    Good luck,
    Julius

  • Disable Refresh menu option on Page Title Bar

    Hi,
    We have a TLN node that opens an iview in a new window. Therefore nothing is displayed in the portal page. However the Page Title Bar menu still has all the options (Open in New Window, Refresh, Details etc.) and if a user selects Refresh, it throws a portal runtime error (iView not found: .default). How can I disable the menu options for this iview? I have tried setting the Show Refresh etc. parameters to No but it didn't work - I assume because the iview isn't being opened in the portal page.
    Many thanks
    Jane

    hi
    the iview you need to explore is page title bar i view in default framework page available in  portal standard user  directory in portal content.In this context i would like to suggest a solution why don,t you creat a default framework page just copy it in your folder  and open it and disable all checkboxes associated to page title bar and save after that go on to create a deskttop in portal display in system configuration and add your framework page and theme from themes in portal content and then add a rule to the main rule in super administrators  folder which will for role of the user will display onle that desktop.i have illustrated the concept of branding if you want to avoid codeing or command groups which is long approach.hope this helps youplease do not forget to give points
    with regards
    subrato kundu

  • Activating User Menu option in SAP Easy Access Screen

    Hi,
    Can anyone tell me to activate User Menu in SAP Easy Access screen.
    Menu -> User Menu option is disabled.
    Is there any Profile Paramater to Enable or Disable this menu option?
    Thanks,
    Piyush

    Hey,
    Juan and Ganesh, you both are right. But the roles are already assigned to the users.
    Its not for 1 users, its for all the users.
    We can activate the user menu from Easy Access Screen menu option Menu->User Menu. But this is disables in the Menu->User Menu.
    Hence any user is not able to the the user menu.
    There is a Profile parameter through which we can enable or disable this option. Can you please provide me the name of that parameter.
    Thanks.,
    Piyush

  • Activate User Menu in SAP logon screen

    1. Configure individual specific SAP user
    Enter transaction code  SM30 (Maintain Table Views) in your SAP command field and maintain USERS_SSM table. You would notice that no data maintained in this table during initial access. To maintain entries, click u2018New Entriesu2019 button. Enter the individual username on the User Name field. To enable user menu and SAP menu, tick the appropriate checkboxes. To disable, untick the chekcboxes.
    2. Configure all SAP user
    Enter transaction code  SM30 (Maintain Table Views) in your SAP command field and maintain SSM_CUST table. To enable te user menu for all SAP users set ALL_USER_MENUS_OFF = No. To disable it, set ALL_USER_MENUS_OFF = Yes.
    To enable the SAP Menu set SAP_MENU_OFF =  No, to disable it set SAP_MENU_OFF =  Yes.

    It is not a question, it is a tarot card
    @ Arindam Banerjee: Feel free to post you findings if they are interesting or "common mistakes", but please only use this thread. Ideally this is stuff for the wiki - if not already in help.sap.com or the system itself...
    Specifically in this case, user menus is no easy task in the wild and is very dependent on how you build your roles.
    Cheers,
    Julius

  • "Disabled User Operations" - - DVDSP default settings??

    In Menu > Advanced there is a section titled "Disable User Operations", and by default DVDSP has selected a number of Playback Controls to be DISABLED:
    Still Off
    Pause On/Off
    Forward Scan
    Next Program
    Previous Program
    Should I leave these default DVDSP settings? Wouldn't it be better to let the user have full control? ie: I should not disable anything?

    It is up to you and what you want the user experience to be. But for menus those make sense to disable

  • Activating user menu

    I have two diff. problems
    In one system I'm getting SAP menu but user menu is disabled, how to activate?
    and In other system all users are able to see User menu and SAP menu except one user...what needs to be changes for that user...
    Thx,
    Yash

    Hi,
    login on to sap system where sap menu is display.
    now from menu -> select user menu.
    or
    The administrator can activate or deactivate menus for individual
    users.
    -   If there is a user setting it is used, if the menu exists.
        Global settings are then ignored.
    -   To make user settings, enter or change records in the table
        USERS_SSM in the View maintenance transaction SM30). You can
        then specify whether the user menu or the SAP menu are to be
        displayed for a user.
    regards,
    kaushal

  • Exchange infrastructure user menu

    How I do make the user menu for exchange infrastructure always enabled. (Especially when I logged on as a client).
    Any help is greatly appreciated
    Natarajan

    Raj,
    I logged on to the discovery system and try to configure the demo for airline tickets system. As part of the configuration, in the documentation provided by SAP,  I had to logon as a client and look at the user menu for exchange infrastructure. When I log on as client, the icon for user menu was disabled and I do not know if there is any transaction code I can enter which will show the exchange infrastructure menu.
    Natarajan

  • Disabling the menu item

    Hi there,
    I am very new to enhancements.
    In the transaction VL02N I want the disable the menu item delete, pls tell me how to do it.
    waiting for your reply
    Thanx in advance,
    Regards,
    Parvez.

    Hi,
    you need to have a userexit for this one, so that you can write the code to Disable the menu items, so first find the user exit for this,
    below link will have a program, copy and paste it and exeute it, it will ask the t-code, it will give the user exits for that t-code, http://www.erpgenie.com/abap/code/abap26.htm
    so see which one is useful for you. after finding the user exit you need to write the code in that to exclude the menu items
    Use excluding option when you call the PF status from your program, to do that declare an internal table and populate the internal table with the fields that have to exclude from the menu and call the PF status using the syntax given below,
    data: itab type table of sy-ucomm.
    append 'DELE' to itab.
    append 'PICK' to itab
    set pf-status 'AAA' excluding itab.
    Regards
    Sudheer

  • Disabling standard menu function

    Hi,
    We have a requirement where there is a need to disable the standard menu function in CO02 based on the user.After entering the order number,it takes to next screen. In that screen,i have to disable the menu option which is in Functions --> Restrict Processing --> Technically Completed. Can any one tell me how to acheive this.
    Regards,
    Krishnam Raju

    Hi,
    I am able to disable the menu function by creating the enhancement implementation for the spot 'es_saplcozf' in the function module 'CO_ZF_BUILT_FCODE_EXCL_TAB' .But i am not sure whether this is the right approach or not. Can any one give me the suggestions ?
    Regards,
    Krishnam Raju
    Edited by: krishnam raju on Dec 30, 2008 12:01 PM

  • Crazy users menu at start

    Hi. I'm still learning about Tiger. When it start, a menu with the admin user and 'other' appears. If I click on one of the options, the menu box shakes and nothing else happens. Above there is three buttons: sleep, restart, shut down (repouso, reinciar, desligar in my language). So I'm obligate to restart. Than the menu appears again, than I restart again and at the thirt (3) try the menu does not appears and it initializes normaly.
    Why this menu shouws up? There is no other user, just admin, were I cane disable this menu?

    If it took 30 minutes to boot into Safe Mode then you had or have Disk Problems, hopefully they are fixed now.
    I think you have two choices...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    It'll boot like a newly setup Mac, but all your stuff should still be there once filling out the stuff.
    Or, an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    Just be sure to select Preserve Users & Settings.
    And if you go with the A&I, do this first...
    1. Insert the Mac OS X Tiger Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214

  • Can I Disable the Menu at report run time

    Dear All,
    I have windows Environment with Oracle 8i and Report 6i
    Can I Disable the Menu at report run time.
    user not able to generate other formats (HTML,PDF etc) of my report.
    awaiting with advance Thanks

    Hello,
    There are some parameters to disable some "feature" :
    DISABLEFILE
    Description
    DISABLEFILE specifies whether to disable the File->Generate to File menu in the Runtime Previewer.
    Syntax
    [DISABLEFILE=]YES
    Search for disable* in the Reports 6i online help for more details ..
    Regards

Maybe you are looking for

  • Suddenly unable to delete files from within the Dock

    I got my iMac about 2 months ago, and I'm pretty sure I was always able to drag a file (or folder) from, say, the Downloads stack directly to the Trash without having to open Downloads in Finder. For some reason it doesn't work any more, and I have t

  • Can i create a ms-access database (very urgent)

    hi folks i really need help in creating a ms-access database, i searched the forums but i couldnot find any answers. i really appreciate if anyone can tell how to create a ms-access database

  • Few composite files are not up even sao and osb servers are restarted.

    Hi All, I have situation where my soa compsite9s) are not restarting even I have restarted my soa & osb server(s). My implementation is I have composite(s) which refering to OSB services. sometimes OSB services are down and my composites are struckin

  • Why Start SQL*Plus with /nolog

    What is the difference between starting SQL*Plus as in sqlplus sys as sysdba versus sqlplus /nolog connect sys as sysdba I can imagine that the second method prevents some log file from being written but sometimes logs are useful. Is there more to it

  • BEx - Adding a cumulated column

    Hi all, I need to design a report like below, in line I have what is drilled down like material, plant, .... WEEK 1--|WEEK 2|WEEK 2-- |.... Delivered | Total delivered | Delivered | Total delivered | Delivered | Total delivered |... Material 1 |---10