Disabling Spatial data cache for one theme?

How can I accomplish this. I have a crude editing application and this cache is preventing the updates from being seen in the ThemeBasedFOI under oracle maps. The ThemeBasedFOI.refresh() seems to have no effect.
I have confirmed that disabling the entire cache resolves the problem, but I have another application that needs this cache on the mapviewer, so turning off the whole cache isn't a good option.
So, can I mark a single theme to be ignored in this cache?

You can set the caching mode for each geometry theme individually (NONE, NORMAL (default) or ALL). Using MapBuilder, go to the Advanced panel on the theme editor, and select NONE as caching mode.
Joao

Similar Messages

  • Mapviewer - Spatial Data Cache

    I am trying to clear the spatial data cache in two different versions (mv10 & mv11ea) of Mapviewer without success. To confirm that the cache is being cleared I have enabled the report_stats as below in the mapViewerConfig.xml for both versions
        <spatial_data_cache   max_cache_size="64"
                              report_stats="true"
        />After a few requests I note the following in the log:
    Cache group PARCEL_VIEW_SHAPE_82473_PDT_GEOM statistics:
       capacity: 262144
           size: 145988
    load factor: 0.95
        # of chains: 88837
    max chain depth: 8
    avg chain depth: 1.6433242905546113
    empty bucket %: 0.6611137390136719
    total mem size : 28169KBKnowing (assuming) that this cache group is populated by a single theme that references the PARCEL_VIEW table I then issue the following via the Admin section of the Mapviewer control.
    <?xml version="1.0" standalone="yes"?>
    <non_map_request>
      <clear_theme_cache data_source="vicmap" theme="THEME_PARCEL" />
    </non_map_request>Then, after waiting patiently for the next set of statistics to appear in the log (BTW, is there a way to change the frequency from 10 minutes to something more regular?) I notice that the information for the cache group has not changed.
    Am I following the correct steps here? If I wish to clear the spatial cache, should I be monitoring these statistics?
    All advice most welcome.
    Ross.

    Hi Ross,
    we'll review the statistics reported and check why it is not changing. The frequency is currently hard-coded (5 minutes), and there is no parameter on the configuration file to change that. We may consider this in the future.
    Joao

  • Spatial Data Cache Setting

    Hi all,
    If I disable the cache, I mean if I set max_cache_size to 0 on mapviewerConfig, Will it affect mapviewer performance or speed?
    I have developed sample application to move a point data on web using mapviewer. After updating SDO_GEOMETRY column on database, I will refresh the map. The map will show moved point data only if I set max_cache_size to 0 on mapviewerConfig. Is there any mapviewer API is available to clear spatial data cache?
    Thanks,
    Sujnan

    This is likely a bug. It assumes a 2gb limit.

  • Dialog box says-"Bridge encountered a problem and is unable to read the cache. ... purge central cache" For one, I can't find the central cache and two, I've purged the cache in bridge. Shouldn't that help.

    Our Bridge has been acting very strange. It keeps giving a dialog box of "Bridge encountered a problem and is unable to read the cache. ... purge central cache" For one, I can't find the central cache and two, I've purged the cache in bridge. Shouldn't that help? There's just all kinds of weird stuff going on. I suppose it does have something to do with the central cache, so maybe someone can tell me where to find it.
    When I use the burn/dodge tool sometimes it drags and staggers and takes forever to complete whatever I'm burning/dodging. When I try to delete an image from the dock, it won't disappear but it won't display either.
    Any help would be appreciated.

    The Central Cache is the Bridge Cache.
    It's referred as the Central Cache to differentiate it from the individual folder's cache or even the individual image cache.

  • Spatial data cache only 2048MB ??

    Why spatial data cache can be only less then 2048MB ??
    If I set up any value larger then this, it shows a negative numer of cache size in get_stats xml request (the same in logs when Mapviewer is starting).

    This is likely a bug. It assumes a 2gb limit.

  • Delete the data content for one InfoObject in processchain

    Hi Guys,
    We have requirement to delete the data content for one InfoObject in processchain(daily) .We made this infoObject as InfoProvider.
    Could you please tell me is there any function module or abap program or any other alternative to do this and which can be added to processchain.
    We made this infoObject as InfoProvider.
    Thanks
    Prasanna

    just use the RSPC-maintenance screen and look for "deletion of requests from PSA" or something like that.
    Add it in the Processchain, run it...c'est tout.

  • Is this possible to already reserve 2 TB of space on a data drive for one database

    Is this possible to already reserve 2 TB of space on a data drive for one database.
    Please suggest how to do this.
    Best regards,
    Vishal

    You can either change the current filesize of current files in your database or add new file(s) whose current size is 2TB by using the ALTER DATABASE command.  If you don't have instant file initialization, adding 2TB to data files can take a long time. 
    If you are adding 2TB to log files that can take a long time whether you have instant file initialization or not.  For info on instant file initialization see
    http://technet.microsoft.com/en-us/library/ms175935%28v=sql.105%29.aspx
    and
    http://sqlblog.com/blogs/tibor_karaszi/archive/2009/03/09/do-you-have-instant-file-initialization.aspx
    In addition, there are several good links in the comments to Tibor's blog entry, especially the links to Paul Randal's blog.
    Tom

  • No international data plan for one year-???

    Here is the background.  I moved over to Verizon about 4 months ago from Alltel.  I did this because I wanted to be able to have a blackberry with international BBm'ing.  I did not go with ATT because there coverage was spotty in my area.  Since the move, I would say my Alltel coverage was 3x better then the cuurent verizon in my house even with the network extender ( BB don't work well with network extender compare to droids, according to the VZW reps).  I did not stay with Alltel because they did not have the storm2.  I needed 6 lines and a mifi and the local verizon rep told me no problem that they could do one primary line and 5 additonal line plus the mifi but after I signed up they realized that I maxed out at 5 lines on one account and they made me make my 6th line a primary line and then added the mifi to the 2nd account.  More costs per month.  Within a month of having my VZW account, one of my kid went to China and we were able to add the international data plan for her trip so she could BBM us.  No problems.
    Here is the problem.  I am going abroad in 2 days and would like to put the international data plan on 2 phones for the trip.  The rep says he cannot do becaue the polciies have changed with the "xerox" buyout and they won't let me do it for the following reasons.
    1.  I have not had my phones for more than one year even though I paid a deposit on them
    2. I have 7 lines on one account- not true I have one account with 1 primary line and 4 additional lines and I have another account with one primary line and the mifi account.  they are all billed on the same statement.  If they are all "one account" then VZW owes me a refund on the 2nd account's primary line as they cannot have it both ways. 
     We came to verizon for the purpose of BBM’ing when going international and now we cannot use it.  I am paying over $500.00 a month and have not been late on any payments, paid a deposit on the phones, am paying for 2 primary lines and did this a few weeks ago for my daughter and now I cannot add the international option again for a week of vacation abroad?  This is really upsetting and pretty much the last straw if it does not get resolved before this trip.  I should have stayed at Alltel or went to ATT and got an I phone because this is no better.    The rep I talked too was bedeviled by this policy and went two levels up in supervisors and was denied.  They are supposed to call me to resolve this issue tonight or in the morning. 
    {word filter avoidance}

    Update:
    I got a call from my local rep at the store where I bought all the phones.  She said they called corporate and all blocks on my international data plan have been removed?  I will stop by this afternoon and confirm that it has all been done???? I still cannot believe how many hoops I will have had to jump through to get this done as it was done 2 months ago, if it actually gets done.
    If it does not get done then i will be requesting to be let out of my contract for breach of contract on Verizon's part as it was never told to me that I could not have international service for one year after signing up and we were able to do it within a month of signing up initially.  Will post updates

  • Issue in data replication for one particular table

    Hi,
    We have implemented streams in out test environment and testing the business functionalities. We have an issue in data replication for only one custom table all other tables data replications are proper no issue. When we do 100 rows update data replication is not happening for that particular table.
    Issue to simulate
    Update one row -- Replication successful.
    100 rows update -- After 3-4 hrs nothing happened.
    Please let me know did any of you have come across similar issue.
    Thanks,
    Anand

    Extreme slowness on apply site are usually due to lock, library cache locks or too big segments in streams technical tables left after a failure during heavy insert. these tables are scanned with full table scan and scanning hundreds of time empty millions of empty blocks result in a very big loss of performance, but not in the extend your are describing. In your case it sound more like a form of lock.
    We need more info on this table : Lob segments? tablespace in ASSM?
    If the table is partitioned and do you have a job that perform drop partitions? most interesting is what are the system waits nd above all the apply server sessions waits. given the time frame, I would more looks after a lock or an library cache lock due to a drop partitions or concurrent updates. When you are performing the update, you may query 'DBA_DDL_LOCKS', 'DBA_KGLLOCK' and 'DBA_LOCK_INTERNAL' to check that you are not taken in a library cache lock.

  • Disabling the object cache for value OciObjects

    Hi.
    I have a program using OCIObjects as value objects to pass data from OCI to PL/SQL procedures. However in a multithreaded test there is a lot of mutex blocking occuring within the oracle client library (on OCIObjectNew, OCIObjectFree and others), which i am guessing is associated with the OciObjects being managed within the object cache.
    Is it possible to disable the object cache? Or maybe construct the value objects in such a way that they are ignored by the cache.
    Thanks for any help.

    Hi,
    thanks for your response.
    I did consider using OCI_ENV_NO_MUTEX but i would like the oracle OCI library to implement mutexing because i am assuming it does it efficiently and only where required. However it is not clear to me why mutexing would be required when creating/deleting value OCIObjects. I'm guessing it's because of the object cache. (The documentation doesn't explain.)

  • Mold wise data capturing for one characteristic

    For one particular characteristic, I want to capture data mould wise seperately as client requirement is for mold wise analysis. Can I use "units to be inspected" functionality here. Can anyone tell how it will work.
    Or do I need to maintain seperate MIC mold wise for this characteristic.
    Client requirement is to capture (Inpection point based recording- daily 2 times)
    Mean value of mold for entire run
    Max value of mold during entire run,
    Min value of mold during entire run
    How can I capture data with respect to mold wise and I can use that data for mold wise analysis.

    Hi Vineet,
    Please maintain a Class type for each mould and create characteristics for each mould separately.
    Thanks and regards
    'Murugesan

  • Need to skip the data load for one of the sub chain.

    Hi All,
    In our project, we have one meta chain and have many sub chains inside that. Today we don't want to run one of the sub chain. As we are in BW7.0, Skip options are not available. Can you please help how to stop the data load for the particular sub-chain.Please suggest.
    Thanks.

    Hi Jalina,
    If this is a frequent request then you can create a custom ABAP Program and then use the below simple logic to skip/run the meta chain, but you will also have to change the link between the sub chains as "Always" instead of "Successful" so that no matter if the dependent chain is successful OR not the nex chain will proceed. If you are comfortable with event then you can also use event to achieve this
    Program Logic- Create a new table where you maintain meaningful values (indicator/description) in it and the program should read the data from the table, Based on the values in the table the program will be successful/fail
    Thanks
    Abhishek Shanbhogue

  • PROBLEM  TRANSFERRING   MULTIPLE   DATA  ENTRIES    FOR  ONE KEY-FIELD.

    DEAR   EXPERTS ,
       I  HAVE  TRANSFERRED  DATA  FROM  THE  FINAL  INTERNAL  TABLE  OF  MY  ABAP REPORT (NOT ALV)  TO  CUSTOM  Z-TABLE  CREATED  IN  SE11.
    BUT  MY  PROBLEM  IS  :  I   COULD  NOT   TRANSFER  MULTIPLE   DATA  ENTRIES   FOR  A  PARTICULAR  FIELD.
    FOR  EXAMPLE :  IN  TABLE  EKKO  THERE  ARE   FOUR  EBELN-4900006375  AND  FOR  THAT  DIFFERENT  EBELP S  ARE
    PRESENT.  I  COULD  TRANSFER  ONLY  THE  FIRST  ENTRY ,  THAT  IS :  EBELN -  4900006375  AND   EBELP - 0010,
    AFTER  THAT  THE  ZTABLE  IS  NOT  GETTING  UPDATED  TO  EBELN-4900006375 FOR  EBELP - 0020  AND  SO ON.
    I  HAVE  TRIED  ALL  THE  '  MODIFY, INSERT,  UPDATE  '  STATEMENTS.  I  HAVE  USED  AT - USERCOMMAND - HIDE  AND  CHECKBOXES.
       PLEASE   SUGGEST   A   SAMPLE   CODE   FOR   THIS.
    Moderator message: please post again, but not in all upper case.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    Edited by: Thomas Zloch on Jun 19, 2011 10:05 PM

    There are actually 5 queries in this report now. From what I understand about a union query, I don't think it will work here because the data being returned in each of the queries is so different. I basically need to know how to make all the criteria for each individual to be displayed before proceeding to the next data set, which will include the same data as the first, but for the next employee, and so on. I need to basically create a repeating frame with each individual's respective data I guess, but every time I do, it tells me that it's referencing an invalid group.

  • Disable Drill options only for one dimension of  Web Analysis report

    Hi,
    Please help me on below issue.
    I created a web analysis report with 3 dimensions Accounts, MRC and Measure. I have to disable drill down and drill up options only for Measure. Accounts and MRC should be drillable where as Measure should show the selected member as static and not drillable.
    Thanks

    Hi Swetha,
    You must've realized that- Even if you select only the desired members, you end up being able to drill-down unwanted members. Correct ? :)
    The only way, I believe, is- To create a users' group at your Data source side, perhaps, Essbase & provision this new group with a Metaread filter which prevents him/her from Drilling down to the leaf node.
    PS: Giving Read access might also let the user not see the data for children. But, if you want to hide the members also, Metaread+ is the way to go.

  • System and Query field disable in Data Manager for Netweaver BI

    Dear All.
    i have installed Xcelsius Engage Server 2008, when i try to add connection for SAP Netweaver BI from the Data Manager the dialog appears correctly but in Defination TAB only the Name field is enable both System and Query field is disable.
    without that how can i configure the connection please let me know how to fix this issue.
    Kind regards,

    Hi,
    You give the name of the connection and then click on "Browse".  It will then prompt you to connect to the desired system.  Log in and then select the appropriate query you want to build a dashboard on.
    Hope this helps.
    Regards,
    RashmiG

Maybe you are looking for