Mold wise data capturing for one characteristic

For one particular characteristic, I want to capture data mould wise seperately as client requirement is for mold wise analysis. Can I use "units to be inspected" functionality here. Can anyone tell how it will work.
Or do I need to maintain seperate MIC mold wise for this characteristic.
Client requirement is to capture (Inpection point based recording- daily 2 times)
Mean value of mold for entire run
Max value of mold during entire run,
Min value of mold during entire run
How can I capture data with respect to mold wise and I can use that data for mold wise analysis.

Hi Vineet,
Please maintain a Class type for each mould and create characteristics for each mould separately.
Thanks and regards
'Murugesan

Similar Messages

Offline data capture for SQLServer2k shows 0 tables

Hi,
I'm evaluating OMWB Offline Data Capture for SQL Server 2000 migration.
I ran OMWB_OFFLINE_CAPTURE.BAT script for SQL Server 2000. It seams like the DAT files are generated and no error messages appear. The problems occure when I start the OMW and try to "Capture Source Database".
I specify the directory, where the generated DAT files reside, the DAT files appear in the file list and the status is AVAILABLE. But when I run the Capture with the Oracle Model Creation, I see among the LOG messages that "...Tables Mapped: 0...".
I created TEST database with the table [tab] in it. In generated SS2K_SYSOBJECTS.dat file there is a row for this table:
tab \t 2041058307 \t U \t 1 \t 1 \t 1610612736 \t 0 \t 0 \t 0 \t 2006/09/26 \t 0 \t 0 \t 0 \t U \t 1 \t 67 \t 0 \t 2006/09/26 \t 0 \t 0 \t 0 \t 0 \t 0 \t 0 \t 0 \t \r\n
The rest objects are not in the Oracle Model too (I believe the user sa must have been created too).
Please, anybody help with this problem.
Pavel Leonov, Consultant
Ispirer Systems Ltd.
SQLWays - Data, schema, procedures, triggers conversion to Oracle, DB2, SQL Server, PostgreSQL, MySQL
http://www.ispirer.com

I changed the separators back to the default. But the Oracle Model still is not created. Still the same problem, there are no tables at all in the source database.
Here is how the row for the table is specified in the SS2K_SYSOBJECTS.dat file:
tab ? 2041058307 ? U ? 1 ? 1 ? 1610612736 ? 0 ? 0 ? 0 ? 2006/09/26 ? 0 ? 0 ? 0 ? U ? 1 ? 67 ? 0 ? 2006/09/26 ? 0 ? 0 ? 0 ? 0 ? 0 ? 0 ? 0 ? ?
Here is some information from the log:
Type: Information
Time: 26-09-2006 15:13:56
Phase: Capturing
Message: Row delimiter being used for offline capture is ¤
Type: Information
Time: 26-09-2006 15:13:56
Phase: Capturing
Message: Column delimiter being used for offline capture is §
Type: Information
Time: 26-09-2006 15:13:57
Phase: Capturing
Message: Generating Offline Source Model Load Formatted File For SS2K_SYSOBJECTS.dat ,File Size: 5235
Type: Information
Time: 26-09-2006 15:13:57
Phase: Capturing
Message: Generated Offline Source Model Load File d:\DBClients\oracle\ora92\Omwb\offline_capture\SQLServer2K\itest\SS2K_SYSOBJECTS.XML
Type: Information
Time: 26-09-2006 15:14:27
Phase: Creating
Message: Mapping Tables
Type: Information
Time: 26-09-2006 15:14:27
Phase: Creating
Message: Mapped Tables
Type: Summary
Time: 26-09-2006 15:14:27
Phase: Creating
Message: Tables Mapped: 0, Tables NOT Mapped: 0
By the way. After I try to create the Oracle Model, for each of the DAT files the XML file is created with the following content:
<?xml version="1.0" encoding="Cp1251" ?><START><er></er></START>
May be this will help to shed a light on the problem.
Pavel

SQL Server 2012 Change Data Capture for Oracle by Attunity support for Oracle 12

I would like to know if there are any plans for SQL Server 2012 Change Data Capture for Oracle by Attunity to support versions of Oracle 12 and if by when.

I have asked from the author of
http://blogs.msdn.com/b/mattm/archive/2012/03/26/cdc-for-oracle-in-sql-server-2012.aspx about this.
I will either ask him to answer here or I would be a messenger.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Delete the data content for one InfoObject in processchain

Hi Guys,
We have requirement to delete the data content for one InfoObject in processchain(daily) .We made this infoObject as InfoProvider.
Could you please tell me is there any function module or abap program or any other alternative to do this and which can be added to processchain.
We made this infoObject as InfoProvider.
Thanks
Prasanna

just use the RSPC-maintenance screen and look for "deletion of requests from PSA" or something like that.
Add it in the Processchain, run it...c'est tout.

Is this possible to already reserve 2 TB of space on a data drive for one database

Is this possible to already reserve 2 TB of space on a data drive for one database.
Please suggest how to do this.
Best regards,
Vishal

You can either change the current filesize of current files in your database or add new file(s) whose current size is 2TB by using the ALTER DATABASE command. If you don't have instant file initialization, adding 2TB to data files can take a long time.
If you are adding 2TB to log files that can take a long time whether you have instant file initialization or not. For info on instant file initialization see
http://technet.microsoft.com/en-us/library/ms175935%28v=sql.105%29.aspx
and
http://sqlblog.com/blogs/tibor_karaszi/archive/2009/03/09/do-you-have-instant-file-initialization.aspx
In addition, there are several good links in the comments to Tibor's blog entry, especially the links to Paul Randal's blog.
Tom

No international data plan for one year-???

Here is the background. I moved over to Verizon about 4 months ago from Alltel. I did this because I wanted to be able to have a blackberry with international BBm'ing. I did not go with ATT because there coverage was spotty in my area. Since the move, I would say my Alltel coverage was 3x better then the cuurent verizon in my house even with the network extender ( BB don't work well with network extender compare to droids, according to the VZW reps). I did not stay with Alltel because they did not have the storm2. I needed 6 lines and a mifi and the local verizon rep told me no problem that they could do one primary line and 5 additonal line plus the mifi but after I signed up they realized that I maxed out at 5 lines on one account and they made me make my 6th line a primary line and then added the mifi to the 2nd account. More costs per month. Within a month of having my VZW account, one of my kid went to China and we were able to add the international data plan for her trip so she could BBM us. No problems.
Here is the problem. I am going abroad in 2 days and would like to put the international data plan on 2 phones for the trip. The rep says he cannot do becaue the polciies have changed with the "xerox" buyout and they won't let me do it for the following reasons.
1. I have not had my phones for more than one year even though I paid a deposit on them
2. I have 7 lines on one account- not true I have one account with 1 primary line and 4 additional lines and I have another account with one primary line and the mifi account. they are all billed on the same statement. If they are all "one account" then VZW owes me a refund on the 2nd account's primary line as they cannot have it both ways.
We came to verizon for the purpose of BBM’ing when going international and now we cannot use it. I am paying over $500.00 a month and have not been late on any payments, paid a deposit on the phones, am paying for 2 primary lines and did this a few weeks ago for my daughter and now I cannot add the international option again for a week of vacation abroad? This is really upsetting and pretty much the last straw if it does not get resolved before this trip. I should have stayed at Alltel or went to ATT and got an I phone because this is no better. The rep I talked too was bedeviled by this policy and went two levels up in supervisors and was denied. They are supposed to call me to resolve this issue tonight or in the morning.
{word filter avoidance}

Update:
I got a call from my local rep at the store where I bought all the phones. She said they called corporate and all blocks on my international data plan have been removed? I will stop by this afternoon and confirm that it has all been done???? I still cannot believe how many hoops I will have had to jump through to get this done as it was done 2 months ago, if it actually gets done.
If it does not get done then i will be requesting to be let out of my contract for breach of contract on Verizon's part as it was never told to me that I could not have international service for one year after signing up and we were able to do it within a month of signing up initially. Will post updates

Issue in data replication for one particular table

Hi,
We have implemented streams in out test environment and testing the business functionalities. We have an issue in data replication for only one custom table all other tables data replications are proper no issue. When we do 100 rows update data replication is not happening for that particular table.
Issue to simulate
Update one row -- Replication successful.
100 rows update -- After 3-4 hrs nothing happened.
Please let me know did any of you have come across similar issue.
Thanks,
Anand

Extreme slowness on apply site are usually due to lock, library cache locks or too big segments in streams technical tables left after a failure during heavy insert. these tables are scanned with full table scan and scanning hundreds of time empty millions of empty blocks result in a very big loss of performance, but not in the extend your are describing. In your case it sound more like a form of lock.
We need more info on this table : Lob segments? tablespace in ASSM?
If the table is partitioned and do you have a job that perform drop partitions? most interesting is what are the system waits nd above all the apply server sessions waits. given the time frame, I would more looks after a lock or an library cache lock due to a drop partitions or concurrent updates. When you are performing the update, you may query 'DBA_DDL_LOCKS', 'DBA_KGLLOCK' and 'DBA_LOCK_INTERNAL' to check that you are not taken in a library cache lock.

Need to skip the data load for one of the sub chain.

Hi All,
In our project, we have one meta chain and have many sub chains inside that. Today we don't want to run one of the sub chain. As we are in BW7.0, Skip options are not available. Can you please help how to stop the data load for the particular sub-chain.Please suggest.
Thanks.

Hi Jalina,
If this is a frequent request then you can create a custom ABAP Program and then use the below simple logic to skip/run the meta chain, but you will also have to change the link between the sub chains as "Always" instead of "Successful" so that no matter if the dependent chain is successful OR not the nex chain will proceed. If you are comfortable with event then you can also use event to achieve this
Program Logic- Create a new table where you maintain meaningful values (indicator/description) in it and the program should read the data from the table, Based on the values in the table the program will be successful/fail
Thanks
Abhishek Shanbhogue

Change Data Capture for XML

We have an XML file being created every week on the mainframe. This file is loaded to Oracle Database. Initially we were performing a refresh of a table, due to business reasons, we need to load only the changes from this XML file to our stage database.
Then, the changes incorporated to the stage needs to be applied to our warehouse database.
Is this possible? We cannot implement Change Data Capture on the Mainframe side.

>
they are not oracle DBs anyway
>
Then why are you posting in an Oracle forum and using Oracle terms like 'change data capture'?
>
3. don't want to serialize my inserts because since I am not sure I can keep up with the insert rate
>
That doesn't even make any sense. Oracle can generate sequence numbers faster than you can use them. Just put a trigger on the tables.
You need to provide an example and explain how the data gets into a DB and how it gets out.

PROBLEM TRANSFERRING   MULTIPLE   DATA ENTRIES    FOR ONE KEY-FIELD.

DEAR   EXPERTS ,
   I HAVE TRANSFERRED DATA FROM THE FINAL INTERNAL TABLE OF MY ABAP REPORT (NOT ALV) TO CUSTOM Z-TABLE CREATED IN SE11.
BUT MY PROBLEM IS : I   COULD NOT   TRANSFER MULTIPLE   DATA ENTRIES   FOR A PARTICULAR FIELD.
FOR EXAMPLE : IN TABLE EKKO THERE ARE   FOUR EBELN-4900006375 AND FOR THAT DIFFERENT EBELP S ARE
PRESENT. I COULD TRANSFER ONLY THE FIRST ENTRY , THAT IS : EBELN - 4900006375 AND   EBELP - 0010,
AFTER THAT THE ZTABLE IS NOT GETTING UPDATED TO EBELN-4900006375 FOR EBELP - 0020 AND SO ON.
I HAVE TRIED ALL THE ' MODIFY, INSERT, UPDATE ' STATEMENTS. I HAVE USED AT - USERCOMMAND - HIDE AND CHECKBOXES.
   PLEASE   SUGGEST   A   SAMPLE   CODE   FOR   THIS.
Moderator message: please post again, but not in all upper case.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Jun 19, 2011 10:05 PM

There are actually 5 queries in this report now. From what I understand about a union query, I don't think it will work here because the data being returned in each of the queries is so different. I basically need to know how to make all the criteria for each individual to be displayed before proceeding to the next data set, which will include the same data as the first, but for the next employee, and so on. I need to basically create a repeating frame with each individual's respective data I guess, but every time I do, it tells me that it's referencing an invalid group.

PR release date capturing for all levels

Hi,
I have activated PR release strategy at Header level. There are about 4 levels of release are there. In custom PR print program, I want to capture the details of all levels corresponding release dates. Can you help me how I can go about it.
Munna.

Hi
PR release date is not relevant to Release strategy.
Purchase Requisition Release Date
Specifies the date on which the purchase order should be initiated on the basis of the purchase requisition.
The release date is based on:
The purchasing department processing time defined for the plant
The planned delivery time from the material master record or purchasing info record
The delivery date
The goods receipt processing time from the material master record
Note
The planned delivery time from the purchasing info record and the GR processing time are only taken into account if the purchase requisition was generated via materials planning.
Example
    Processing time   Planned del.   GR processing
       Purchasing         time           time
Release       PO                    Delivery    Date
date         date                   date    required
Date required:                     10.01.96
GR processing time:                 2 days (working days)
Planned delivery time:             10 days (calendar days)
Purchasing dept processing time:    2 days (working days)
For the material to be available on the date it is needed, the purchase requisition must be released on 09.11.96 (requirement date less GR processing time, planned delivery time, and purchasing department processing time).
Hope it helps
Thanks/karthik

Change Data Capture for Oracle 9i

If your environment must keep large amounts of data current, the Oracle CDC feature is a simple solution to limiting the number of rows that Data Integrator reads on a regular basis. A source that reads only the most recent operations (INSERTS, UPDATES, DELETES), allows you to design smaller, faster delta loads.With Oracle 9i, Data Integrator manages the CDC environment by accessing Oracle's CDC packages. Oracle publishes changed data from the original table to its CDC table. After a CDC table receives published data, you can create subscriptions to access the data. Data Integrator Designer allows you to import CDC tables and create subscriptions for them.For more information see "Techniques for Capturing Changed Data" of the Data Integrator Designer Guide.

Werner did a nice step-by-step instruction on how to set up CDC in Oracle and use this inside Data Integrator. <a href="http://www.consulting-accounting.com/time/servlet/ShowPage?COMPANYID=43&ELEMENTID=1641" target="_blank">http://www.consulting-accounting.com/time/servlet/ShowPage?COMPANYID=43&ELEMENTID=1641</a>

Double data charges for one song!

I'm getting charged for the data on the initial download of a song from iTunes to my PC and then again when I have to download the song from the "cloud" on my iPhone!

I think it was a matter of trying to do it in the car. I just downloaded one sitting here next to the PC with the wifi on and the cellular data off. I'll have to remember that. It ticks me off because I mistakenly did the upgrade to my iPhone and now a bunch of my songs, most that I had even played before, suddenly got put in the "cloud," requiring redownloading. Frustrating.

Multiple data sources for one datagrid?

Hello Everyone,
I have a page that has a datagrid called dgMainGrid. I have
it bound to an HTTPService and it updates fine. But I need to
dynamically bind it to another HTTPService when the user clicks a
button. How can I do that?
Thanks,
Anthony

Come to think of it, is this even possible? How does a datagrid use its dataField parameter to lookup data? I am guessing data_array[row_index][col.dataField] would determine the value of a single cell at row_index and col. If so, my naive approach would require me to override the bracket operator so that the appropriate value is returned..
e.g. when a simple array of objects is used, you have [{name:John, lastname:Smith}], datagridcolumns dataField is then set to "name". Now I will have two separate arrays:
arr1: [{name:John, lastname:Smith}]
arr2: [{name:Smith, lastname:John}]
mergedarray will have a reference to both of them. Then when getKey("name", 1) is called, it will return a special key which can be used to access the name property from array 1, something like "name1". If I cannot override the bracket operator, mergedarray[0][name1] will return nothing.
I remember reading somewhere that this kind of override is not possible. Any ideas?

Disabling Spatial data cache for one theme?

How can I accomplish this. I have a crude editing application and this cache is preventing the updates from being seen in the ThemeBasedFOI under oracle maps. The ThemeBasedFOI.refresh() seems to have no effect.
I have confirmed that disabling the entire cache resolves the problem, but I have another application that needs this cache on the mapviewer, so turning off the whole cache isn't a good option.
So, can I mark a single theme to be ignored in this cache?

You can set the caching mode for each geometry theme individually (NONE, NORMAL (default) or ALL). Using MapBuilder, go to the Advanced panel on the theme editor, and select NONE as caching mode.
Joao

Mold wise data capturing for one characteristic

Similar Messages

Maybe you are looking for