DISC EJECT PROBLEM?????

Hi everybody!!!
I just downloaded Mac OS X 10.4.9 today! But i have some problems. When i press the "Eject" button nothing happens, there is no Eject pictue on the screen. But when i hold the Eject button down for a second the drive Ejects. Is this a problem with my Macbook or is it just another "feature" of 10.4.9 ??

hi
i had this problem fro the start of buying my mac. i took it back to the apple store where they put a new disk system in. they said my old disk was ejecting the disks upwards in a diagonal direction.
sorry this dosn't solve your problem, but even now when i press eject the disk wont eject everytime.
luke

Similar Messages

Annoying disc eject problem

whenever I try to open my DVD tray using the eject button, the tray will randomly choose not to open.
I know I have to hold the button for a while, but even doing that, the drive will always start the eject procedure (I can tell for the noises) but sometimes it appears to give up in the process.
however, software eject always works just fine.
what could be wrong?

HI,
Your profile indicates you are running Tiger 10.4.7 but you posted in the Leopard 10.5.x forum.=??
If you have upgraded your system, please update your profile. Click My Settings on the right side of this page, update the information, then scroll down and click Save. Thanks!
Go here for help to Open the CD/DVD tray on a Mac Pro.
http://support.apple.com/kb/HT2575
Considering you had previous issues with the keyboard; http://discussions.apple.com/message.jspa?messageID=8059296#8059296
that could part of the problem. Try a different keyboard.
Carolyn

Mac Mini won't start and constantly makes disc ejecting noise

My Mac Mini won't start. It was working fine, then just locked up and won't start again. When I push the start button it just makes this repeated disc ejecting noise from the DVD drive. It doesn't make the chime noise or display anything on the monitor. I've disconnected the optical drive, but it didn't help. Then it just doesn't start at all. I thought that if I would disconnect the optical drive, that it would ignore it and just boot off the hard drive, but nothing happened. The power light comes on. Then, if I hold down the power button for 10 seconds it shuts down. The fan operates. It just never attempts to boot up. I can't put in a system DVD because the optical drive is just in eternal eject mode.
If you have any suggestions let me know. Thanks.

I have the same situation.
I think the drive thinks it has a disc to eject or part of the mechanism is stuck and can't return to it's resting position. I was going to disconnect as you tried but now I think I'll try to disassemble the drive to see if there might be some debris jamming things up.
Please let me know if you solve the problem.

Disc ejects before completion in iDVD

Hi, firstly I'm a little behind the times having only recently upgraded to Snow Leopard, my problem is iDVD. I have a collection of images that I am trying to burn via iDVD all goes well until the burning, the disc ejects about 8 minutes before completion, this has happened five times, I have reinstalled Snow Leopard, as the permissions appeared to be incorrect and did not repair in utilities, but still no joy.
The machine is 2.16Ghz intel core 2 Duo, Memory 2Gb 667 MHz DDR2 SDRAM and there is 80GB of memory, also it is iDVD 7 1.2 I know it's not the latest all bells and whistles machine but it worked until the recent upgrade.
Hope someone can help
Thanks.

Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good and you can then burn to disk with Disk Utility at the slowest speed (2x - 4x) available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Cannot Install Windows, disc ejects

I have used Boot Camp to install Windows a few times before on my Leopard operating system, though I had to uninstall it a couple times (I realized I couldn't use my reinstall disc from my old PC). Every time it worked smoothly and I never had any troubles.
For some reason this time around, I am able to partition the disc just fine, but when I choose to start the installation, the computer reboots, but instead of installing windows, it ejects the disc needed and simply starts up Mac OSX. I've tried using option to select the disc (the disc ejects before I'm given my options) and telling the computer to reboot using the disc. Neither has worked. I've used this same disc before to install Windows, and it worked fine then. What can I do to make the disc not eject, so I can install windows?

I experienced this as well. What I discovered is if you push the XP install disc back into the drive while your Mac is still at the grey screen when it reboots you will find the install will continue just fine. This will happen a couple of times during the install process, just push the XP install disc back in each time and XP will install.

Ejecting problem on my 2nd SATA Hard Drive Bay Caddy

I am having an ejecting problem with my caddy secondary HD.
Basically every time I close the lid, the secondary HD is ejected or, in case ejecting fails, I obtain an error message..very annoying situation.
How can windows 7 avoid to eject it? Do you know a best practice to configure properly the 2nd SATA Hard Drive Bay Caddy??
Thanks in advance!
Fabio
Solved!
Go to Solution.

Really sorry, I didn't explain properly: I was talking about Ejecting OS side (windows 7 eject my secondary HD when I close my laptop, consequence is that I don't see it anymore in Computer).
ejecting is when you press here
anyway Thanks!!

Bought used G4 Powerbook; want to install iWork but disc ejects even though tech. specs. say it should install

Bought used G4 Powerbook; want to install iWork but disc ejects even though it meets tech. specs. Any ideas?

What version of iWork do you have? Here's the requirements for various versions.
http://support.apple.com/kb/HT3879
 Cheers, Tom

Disc Drive Issues- Ejecting Problems

Hi!
I was wondering if someone was able to help me with my problem:
I am currently on my second Powerbook G4... The first one I purchased in October 2005, but a DVD managed to get stuck in my drive and Apple replaced it with a new computer as they couldn't figure out how to get the disc free either. My second G4 has so far worked well, but the other day I stuck a disc into my drive and it wouldn't come out. It made the noise as if it wanted to spit it out, and then nothing happened. I panicked, waited a moment and then tried to eject it after the computer recognized it again and then luckily it came out!!
Has anyone else had this issue? Is it something that most G4 users run into, or is this something more serious?
Also- is anyone else's drive somewhat noisy? It makes a little whirring sound every two minutes or so. I used to use a friend's powerbook and I don't remember it making this much noise... I may have forgotten though.
I am currently overseas in Europe and very nervous about inserting another disc as I will not be returning to a the States for several more months and will not be able to go to an Apple Help Center.
Cheers and thanks!
Sassy
Powerbook G4 Mac OS X (10.4.5)

I have the impression that a tobacco smoke free and dust free environment do much to assure the reliability of CD or DVD drives in the Aluminum PowerBook series (all sizes). A friend who is a smoker purchased a CD or DVD drive cleaning kit to solve his problem, continually running the cleaner until functioning was good and disk noise was minimal.
These cleaning kits cost about US$15.00 and have a CD sized disk to which cleaner is applied. I've personally never had much luck with them but the friend is convinced his problem with tobacco smoke and/or dust was solved with one.
Good luck.

My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

Disc Insertion Problem

Has anyone noticed that inserting a disc into the iMac drive can become difficult after a couple of years of use? At first I thought there was a disc in the drive that wouldn't mount or eject, but the drive turned out to be empty. Insertion, however, required moderate force, as if part of the internal drive mechanism was resisting. Is this a problem in the making? Should I have it checked out by a certified technician before anything gets worse? I've never experienced this before. (I sure miss that reassuring pinhole!)

Try a commercial DVD head cleaner you insert to DVD drive.
google" DVD head cleaner"

DVD eject problems recurring

I have problems ejecting a DVD about 1 in 4 or 1 in 5 times I play one and I wondered if this was common to all iMacs or a problem with the Core Duo or OS X?
It happens with all types, self burned and retail so I don't think it's linked to a single type of disc. If it's uncommon I guess it'll need a service.
Just woke my iMac from sleep and realised it slept with a kids DVD inserted and paused. Again couldn't eject the DVD but could both stop the DVD and close its window and start playing again - now here's the odd thing it isn't showing as mounted on the deskop.
Maybe this is an OS X problem rather than the drive?

Yes! Thx God it's up and runing again! I have read this ( http://discussions.apple.com/thread.jspa?threadID=455830&tstart=0 ) post and tryed to just have pacience and wait in front of a white screen for 10 min or so and at a certain moment it just started up! Pressed the eject button and the cd came finally out!
This is the magic post:
http://discussions.apple.com/thread.jspa?threadID=455830&tstart=0

MacBook Pro stopped reading discs, ejects them

I bought this MacBook Pro in December of '08 (referbished, but from the apple website) and shortly after had a problem with the drive not reading discs and making odd noises. Took it in and they replaced it under the 90 day warranty. I haven't used the disc drive in at least a year or more now, but when I tried to recently it would act like it was reading the disc with nothing showing up. After a minute it ejects the disc. I've tried at least a dozen different discs that all work fine on my other computer and my MacBook Pro spits them all out.
Obviously I no longer have this thing under warranty, being 4 years old, so is there anything I can try to do without spending $400 I don't have for ANOTHER new optical drive? All of my software is up to date.
Also, if it comes to replacing the drive again, is there any way that I might get it free since this is a recurring problem with a refurbished laptop? I know it's a longshot, but worth asking.

I'm not sure where you come up with the $400 figure unless you are including some very expensive labor. A replacement drive should not cost more than about $100. They can be user installed and does not require any exotic tools. (I have done it)
Have you tried a little cleaning of the drive. Often a DVD cleaning disk can clean a dusty lens and make it function. Not having used it a long time does not mean that dust has not seeped in during that period. I have also heard that judicious use of compressed air will clean the lens.
It never hurts to ask but your chances of getting a new drive for free are about as good as getting palm trees to grow in Antarctica.
Ciao.

The Disc ejects

When I am burning a movie onto a Verbatim DVD+R DL, the file is put onto the disc all most all the way and just when the DVD is about to be finished (when the status bar says "about 1 min") the DVD ejects automatically while the status bar says it is still burning. I still have the option to "cancel", but the DVD is already ejected. When I try to play it on my DVD-player, it won't read. I burned basically the same DVD earlier before and it worked fine, but for some reason, it randomly ejects the disc before its done writing. Thanks!!!

just wondering if you got this resolved yet. i'm suddenly having the same problem after having burned several idvd (chaptered) projects successfully (from both imovie and final cut pro). now i can't get through a new idvd project burn or one that i've used successfully just recently. the only difference on my end is that i ran out of fujifilm (dvd-r's) and have switched to sony (on sale). can't imagine that the media brand is the difference. on the other hand, i haven't been paying attention to how much drive space i had while burning (now almost 7gb free). also, i've managed to be able to play the main menus and first bunch of chapters on these early eject dvds but then the dvd player gets stuck on the later chapters and crashes the player. also idvd ultimately needs to be forced quit.

Disc ejects on startup

I've been searching for a while now, but still haven't found a solution for this.
Ever since I installed the last update of Leopard, the disc tray on my PowerMac (G5) will eject on startup, before I get to the login screen. I first thought that it was looking to the disc drive for a primary operating system like my PC sometimes did, but couldn't figure out how to change the boot drive.
It's not that bad of a problem, just a little annoying. I've got it on the ground and if I forget to close it back up, my nephew might get a hold of it and snap it off.
Does anybody know what's going on?

Hi! It's a common problem and the cause is odd but i can't remember exactly what it is. I've never read of a fix. Tom

Disc ejects to early

when burning a dvd, the disc always ejects 5 minutes before the project is complete and ruins my whole project
any help.....please?

The Apple Knowledge Base says: "If the burn fails during Multiplexing or Encoding, try deleting any existing encoded assets from your project. Then, quit iDVD and check to see if there are any third-party (non-Apple) plug-ins in /Library/QuickTime/ and ~/Library/QuickTime/ (the tilde "~" character represents your Home folder). If so, try temporarily disabling these items by moving them to another folder. Open iDVD and try burning your project again."
Close iDVD and trash the file com.apple.iDVD.plist found in User (your name)/Library/Preferences. Then do a permissions repair using the Disk Utility app on your Mac.
Additionally, make sure that you have sufficient free disk space to burn a disk. 5 GB is said to be the minimum, but 15GB would be better.
Bring all iLife programs up to current versions.
Use DVD-R disks of good quality, like Verbatim, Maxell or HP. Burn at 4x speed or lower if you can. You can burn from a disk image using the Disk Utility app on your Mac, and that will give you a lower speed, which is recommended.
Close all other programs while you are burning, including your screen saver.
You didn't mention whether the problem occurs just for this project or all other projects as well.

DISC EJECT PROBLEM?????

Similar Messages

Maybe you are looking for