Discover DNS setting for all client PC's in my local LAN

I've done a fairly exhaustive search for an answer, but it seems there should be a way to discover the DNS IP address used in all of my PC's connected to my LAN/Domain.
We recently upgraded the server the hosts the DA and the DNS which now have a different IP address. We use a hardcoded DNS server address (which will soon change) so I had to go to each PC on our network and change each computers DNS address. I think I changed
them all, but I can't be 100% sure unless I go thru all of the PC's again.
I'm hoping there is an easier way other than waiting for a user to complain about not being able to access local resources.

Hi,
Yes, like arnavsharma said, if you have DHCP server, you could get it once for all.
if no, you need alter it one by one.
Alternative, you could use GPO to push the ipconfig /registerdns command to update.
If anyone still look for old IP, on an individual workstation you would use the command
ipconfig /flushdns to empty the cache and force fresh DNS lookups.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server

How to reduce configuration cache file Quota size located in ( C:\Windows\ccmcache ) for all client from SCCM 2012 server
Thanks in Advance
NTRao

Hi,
There are numerous ways to change the cache size.
You could deploy a vbscript to a collection of the devices.
On Error Resume Next
Dim UIResManager
Dim Cache
Dim CacheSize
CacheSize=20000
Set UIResManager = createobject("UIResource.UIResourceMgr")
Set Cache=UIResManager.GetCacheInfo()
Cache.TotalSize=CacheSize
Or you could use a configuration item.
http://blog.coretech.dk/heh/configuration-items-and-baselines-using-scripts-powershell-example/
You can also use the right click tools by Now Micro on a collection, if all the servers are on this would be the easiest / quickest way.
http://www.nowmicro.com/recast/right-click-tools/
http://www.david-obrien.net/2013/02/how-to-configure-the-configmgr-client/
select SMS_R_SYSTEM.ResourceID, SMS_R_SYSTEM.ResourceType, SMS_R_SYSTEM.Name, SMS_R_SYSTEM.SMSUniqueIdentifier, SMS_R_SYSTEM.ResourceDomainORWorkgroup, SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like '%6.2%'
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724832%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396

I don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

i don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

''how do i save my zoom setting for all sites? not for each site I visit''
That would be be impossible unless you did away entirely with page formatting entirely. Each author may have their own idea of what you should be seeing and how you are to see it. By site which is the default is about the best that you can do.
If you have a serious problem you could change the resolution of your display, but it had better be a very large monitor.
'''NoSquint''', adjust the text-only and full-page (both text and images) zoom levels as well as color settings both globally (for all sites) and per site. Toolbar buttons, percent displays on status bar.
* https://addons.mozilla.org/firefox/addon/2592
'''Zoom text of web pages'''
* http://kb.mozillazine.org/Zoom_text_of_web_pages
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

DNS Setting for internal sites

Hello -
I've had terrible problems with my internet connection recently. No internet connection = no DNS (using Google) and therefore I can't even access sites which are hosted within my own network.
Could anyone talk me through adding DNS references to internal sites on SLS ?
My set up :
ADSL modem (bridge mode) into Airport Express which runs DHCP / NAT
SLS connected to Airport which has DNS server already running.
changeip -checkhostname returns
Primary address = 10.0.1.2
Current HostName = xx.xxx.ltd.uk
DNS HostName = xx.xxx.ltd.uk (changed these entries)
The names match. There is nothing to change.
dirserv:success = "success"
My domain name is registered with an external supplier - and set to point to my static IP address.
Thanks for any help !
Andrew

One thing that did help me though - and this may be obvious to you, but I had problems with Server admin crashing. Changing the DNS server in network preferences on the server itself and the client I was working on to a public DNS helped. Guess that should be pretty obvious though.
If things get wonky, I usually try to run Server Admin directly on the target server box.
Am I safe to reference the DNS server on the client now as dns.mydomain.com ? ie - if that is where the client is getting it's DNS references from, how does it know where dns.mydomain.com points to before it looks it up ?!
DNS servers are referenced by IP address, not by host name. Until the DNS server is available, the DNS names won't work; a bootstrapping problem.
As for testing the server, you can use the dig command to test.
+dig @ip.addr.dns.server whatever+
Also - I am using an Airport Base Station for DHCP / NAT - but can't see how I can specify a DNS server so that all clients receive it automatically ? (This is fine for clients that don't leave the office, but a pain for laptops)
AirPort Utility > select target AirPort > Manual setup > Internet > DNS Servers

NLS_LANG setting for a client with multiple Oracle servers

Hello!
We have a web application which has to connect to one of the Oracle servers with different charactersets. When the NLS_LANG on the client is a single byte encoding and the server has a single byte encoding there are no problems. We have now a server with NLS_CHARACTERSET UTF8 and all special (hungarian accented) character are replaced.
When we set the client to UTF8 the rest of servers does not work.
What is the solution for one client and multiple servers with different encoding?
Is there a special key in connection string?
I tried to change the nls_lang with an alter session statement but without success.
Regards,
emeriqus

NLS_LANG is not depending on the database side, it's a CLIENT setting to "let Oracle know what encoding is used on the CLIENT" so that Oracle can do the conversion from the client encoding to the database (NLS_CHARACTERSET) encoding.
for ONE application/client the is only ONE correct NLS_LANG value, regardless of the database NLS_CHARACTERSET
If you web application is really an UTF8 application (check with your vendor) then you can perfectly use a UTF8 client setting and a 8 bit database
Of course, you will be limited to the database side in this case seen the 8 bit characterset does not know all the characters in UTF8
The fact that setting the NLS_LANG to UTF8 "does not work" with your web application is simply the fact your application is not a UTF8 env.
Setting nls_lang to UTF8 will not "magically" make your application UTF8, NLS_LANG is depending on the encoding used in the web server.
But the first thing to ask yourself is if CURRENT data is correctly in the Oracle database.
use SQLdeveloper to check the data, this is a "know good client" that needs no NLS configuration.
You can download it from http://www.oracle.com/technology/products/database/sql_developer/
If the data is displayed correctly in SQLdeveloper then you are sure it's correct in the database.
If data is WRONG in the database then that needs to be corrected first, "trying" different client side configurations will only make matter worse (even if they make the data "look good" )
Regards,
Gunther
Client side notes on mentalink:
Note:158577.1> NLS_LANG Explained (How does Client-Server Character Conversion Work?)
1.2 What is this NLS_LANG thing anyway?
3.2 A detailed example of a wrong nls setup to understand what's going on.
4.2 How can I Check the Client's NLS_LANG Setting?
5.1 My windows sqlplus is not showing all my extended characters.
Note:179133.1> The correct NLS_LANG in a Windows Environment
Note:264157.1> The correct NLS_LANG setting in Unix Environments
Note:229786.1> NLS_LANG and webservers explained.
Note 115001.1> NLS_LANG Client Settings and JDBC Drivers
When using Unicode start here:
Note:788156.1> AL32UTF8 / UTF8 (Unicode) Database Character Set Implications
Setting NLs parameters: <Note:241047.1> The Priority of NLS Parameters Explained.

Password reset for all clients

Hi
I need to Reset Password on ALL clients within current system for logged on User.
Any suggestions please
Thanks
Regards

Got a Program for this. Am just pasting the code..try it
TABLES: T000, USR02.
DATA: BEGIN OF I_USR02.
        INCLUDE STRUCTURE USR02.
DATA: END OF I_USR02.
SELECTION-SCREEN BEGIN OF BLOCK STANDARD
                 WITH FRAME TITLE TEXT-001
                 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (23) TEXT-005.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (23) TEXT-004.
PARAMETERS NO RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN COMMENT (23) TEXT-002.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (23) TEXT-005.
PARAMETERS YES RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN COMMENT (23) TEXT-003.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN END OF BLOCK STANDARD.
MAIN PROGRAM
IF NO = 'X'.
    MESSAGE I999 WITH
     'Program Terminated at User Request'.
    LEAVE PROGRAM.
ELSE.
    PERFORM CHANGE_PASSWORD.
    SELECT * FROM T000.
      SELECT * FROM USR02 CLIENT SPECIFIED
         WHERE MANDT = T000-MANDT AND
               BNAME = SY-UNAME.
        IF USR02-MANDT = SY-MANDT.
          WRITE : 1 USR02-MANDT COLOR 6 INVERSE.
          WRITE : 5 USR02-BCODE COLOR 6 INVERSE.
        ELSE.
          WRITE : 1 USR02-MANDT COLOR COL_KEY INTENSIFIED.
          WRITE : 5 USR02-BCODE COLOR COL_BACKGROUND INTENSIFIED OFF.
        ENDIF.
        IF USR02-UFLAG = 0.
          WRITE : 24 'Not Locked' COLOR COL_BACKGROUND INTENSIFIED OFF.
        ELSEIF USR02-UFLAG = 64.
          WRITE : 24 'Locked: System Admin.' COLOR 6 INVERSE.
        ELSEIF USR02-UFLAG = 128.
          WRITE : 24 'Locked: incorrect Logons.' COLOR 6 INVERSE.
        ELSE.
        ENDIF.
        WRITE : 50 USR02-TRDAT COLOR COL_BACKGROUND INTENSIFIED OFF.
        WRITE : 61 USR02-CLASS COLOR COL_BACKGROUND INTENSIFIED OFF.
        NEW-LINE.
      ENDSELECT.
    ENDSELECT.
ENDIF.
TOP-OF-PAGE.
NEW-PAGE NO-TITLE NO-HEADING.
PERFORM LISTTITEL.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM LISTTITEL.
      FORM CHANGE_PASSWORD                                          *
FORM CHANGE_PASSWORD.
SELECT * FROM USR02 INTO I_USR02     "grab userid and store data
    WHERE BNAME = SY-UNAME.
ENDSELECT.
IF SY-SUBRC NE 0.
    EXIT.
ENDIF.
UPDATE USR02 CLIENT SPECIFIED        "Write current client pwd over
     SET                               "other clients that have id in.
      BCODE = I_USR02-BCODE
      OCOD1 = I_USR02-OCOD1
      CODV1 = I_USR02-CODV1
      OCOD2 = I_USR02-OCOD2
      BCDA2 = I_USR02-BCDA2
      CODV2 = I_USR02-CODV2
      OCOD3 = I_USR02-OCOD3
      BCDA3 = I_USR02-BCDA3
      CODV3 = I_USR02-CODV3
      OCOD4 = I_USR02-OCOD4
      BCDA4 = I_USR02-BCDA4
      CODV4 = I_USR02-CODV4
      OCOD5 = I_USR02-OCOD5
      BCDA5 = I_USR02-BCDA5
      CODV5 = I_USR02-CODV5
      CODVN = I_USR02-CODVN
      TRDAT = I_USR02-TRDAT
      LTIME = I_USR02-LTIME
      BCDA1 = I_USR02-BCDA1
     WHERE BNAME = SY-UNAME AND
           MANDT NE SY-MANDT.          "Every client but current.
ENDFORM.                               "CHANGE_PASSWORD
      FORM LISTTITEL                                                *
FORM LISTTITEL.
    WRITE: / 'List of client(s) on which the Password for User',
            SY-UNAME COLOR COL_KEY INTENSIFIED,
           'has been reset.'.
WRITE: / 'Password originated on Client : ',
            SY-MANDT COLOR COL_KEY INTENSIFIED.
SKIP.
WRITE: / 'System: ' COLOR COL_HEADING INVERSE,
           20 SYST-SYSID COLOR COL_KEY INTENSIFIED.
WRITE: / 'Date: ' COLOR COL_HEADING INVERSE,
           20 SYST-DATUM COLOR COL_HEADING INVERSE.
WRITE: / 'Time:   ' COLOR COL_HEADING INVERSE,
           20 SYST-UZEIT COLOR COL_HEADING INVERSE.
ULINE AT (73).
WRITE: /(73) SPACE COLOR COL_HEADING INTENSIFIED.
WRITE: 1 'Cl.' COLOR COL_HEADING INTENSIFIED.
WRITE: 4 SY-VLINE.
WRITE: 5 'Encrypted Password' COLOR COL_HEADING INTENSIFIED.
WRITE: 23 SY-VLINE.
WRITE: 24 'Lock Status' COLOR COL_HEADING INTENSIFIED.
WRITE: 49 SY-VLINE.
WRITE: 50 'Last Used' COLOR COL_HEADING INTENSIFIED.
WRITE: 60 SY-VLINE.
WRITE: 61 'User Grp.' COLOR COL_HEADING INTENSIFIED.
WRITE: 73 SY-VLINE.
ULINE /(73).
ENDFORM.                               " LISTTITEL
Regards

Http proxy setting for webservice client.

Hi !
I have set the following option for accessing the webservice through the proxy(webservice
outside the firewall).
I'm using weblogic v7.0 with sp1.
-Dweblogic.webservice.transport.http.proxy.host=xxxx
-Dweblogic.webservice.transport.http.proxy.port=8088
It works fine and my soap client is able to access the webservice lying outside
the firewall.
But when I use the same setting, the soap client fails for accessing the webservice
which are
inside the firewall.
I get "Connection refused".
Is there any option to specify not to use proxy for specific hosts and ports ?
For example http.nonProxyHost
Any pointers will be of great help.
Thanks
Kumar Raj

I have not worked in SoA server, but since it uses weblogic server underlying (I assume), you can try setting the -Dhttp.proxyHost , -Dhttp.proxyPort system properties ( https for secured URL's) to WLS to specify the proxy details. Also the product might not have the capability to pass user credentials for authentication at the proxy. The version of OSB we are using had this problem. To overcome this you might require to add the URL to the proxy free list in your proxy server. This prevents the proxy from prompting for the user name when you access that URL.

Latest patch set for oracle client 8.1.7

hello,
what is the latest patch set exactly for oracle 8.1.7.xx? I know that this version is desupported but I need this client for a third party application that we have in use.
thanks
katharina

Patch 2376472 is the latest patch set for 8.1.7 which will bring you up to 8.1.7.4. It is still available on Metalink.

Query to spool for all clients

we have table weekly_orders have client id,orderno,order_date and other columns
Currently I have scheduled job which spools each into a file.
Spool /u01/9009.txt
Select * from weekly orders where client_id=9009;
Spool off;
Spool /u01/9010.txt
Select * from weekly orders where client_id=9010;
Spool off;
And so on..................
This is kind of manual effort where one has to add new clients
Is there a way we can get data for each client into its own file?
Any help is much appreciated
Thanks

Hi,
user11984714 wrote:
yes ,like sample data ,the clientid is number.
not sure how to format like you did as i am new user for this forum.Type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing on this site.
>
each script is spearated by ###########
>
--weeklyoneclient.sql
DEFINE     this_cll_id     = &1
SPOOL     c:\&this_cll_id..txt
SELECT     *
FROM     order_hist_cl
WHERE     cll_id     = &cll_id;Use the same variable in the DEFINE statement and in the WHERE clause. You're missing the the first 5 characters ("this_") in the WHERE clause; it should be:WHERE     cll_id     = &this_cll_id;

Oracle Terminal, how can i simulate this setting into all client places

Hi friends,
i did setting at ORacle Terminal for ESC button to exit_form. it is ok working fine. i have his application installed into several client places, so, in all this places do i ahve to install Oracle terminal and change the key mappings or is any common registry setting i can add into the registry key, by copying FMRUSW.res file into my application folder,
i do have all my icons in my aplication folder and i add a registry key UI_ICON = 'myfloder', is there any possibility like this.
Thanks in advance

That is one of the big problems with client/server forms. You have to install your FMRUSW.res on every machine running your application, or at least on a file server where the runforms software gets the fmx files.
Changing the resource file is not something you want to do on a regular basis.

Recomnded setting for the client browser with oas

Hi all,
I am using webforms10g(9.0.4) with OAS(first release).
In some sites the client can not open the reports(in rtf format)-the screen shows up
for a second,and then disappear.
In others the client get alert that allow him only to save the file(not to open).
I think that it relate to security setting in the browser of the client(internet explorer).
Is there recommend list for parameter setting in the explorer of the client for using with OAS?
Thank in advance
Z

Hi Chris,
Thanks for your answer.
I will search about jinitator in metalink.
Z

Is there a way to re-set the default fade-in/out setting for all slides?

Hi all, I don't know why all objects on all the slides of my captivate project are set as transition-> fade in/fade out. The result is that every single slide fades out after 3 seconds, even before the learners can finish reading.
The only solution I know is to change each single object from transition->fade in/fade out to No Transitions. However, it takes thousands of clicks.
Does anyone know that there is a one-step solution to get rid of this default fade in/fade out settings?
Or was there something that I did wrong which caused this default fade in/fade out?
Thank you very much.

Hi all, not only are my objects set to no transition, I set the object defaults to rest of slide rather than specific time (located in the same window above. That way slide duration does not matter (unless you are doing autoplay and not using navigation.) This way when my audio lengthens the timeline all my objects are there for the full duration
Also, another tip, once you have set your objects styles and preferences the way you like them you can export both, and import them into any new project that you wish to use them in rather than reset all the time.

HT5373 My iPad calendar only retains a few months history even though I have it set for all entries. All my 2013 dates disappeared?

My iPad calendar dropped all my prior year 2013, dates which I need fir reference purposes. I have my calendar set to retain all dates. What's wrong?

Yes, just as you have outlined, but when I noticed the term of three months I changed it to all. I had previously changed it to all about three months ago when I noticed my calendar was only saving three months worth. Somehow the settings were changed back to three months - I had not been to that area of settings since I made the original change. It appears there must be standard settings that revert back when something triggers them. Can I recovered my lost calendar for 2013?

AD & DNS setting for Hub and spoke network

Hi,
We have multiple sites connectd through VPN (Hub and spoke network). Following is the site information
Head Office (DC) ----- contoso.com ------ 192.168.100.2
Site1 (ADC) ----- site1.contoso.com ------192.168.101.2
Site2(RODC)----contoso.com ------192.168.102.2
Site3(ADC)-----contoso.com ------- 192.168.103.2
site4(ADC)-----site4.contoso.com-----192.168.104.2
site5(ADC)-----contoso.com -------192.168.105.2
i am trying to ping DC (contoso.com) from site4 & site site1 sometimes it's getting reply from site5 and site3 not from HO.
How can i configure all request go to HO (192.168.100.2).
for any other information please ask me.
Regards,
Kumar

Hello,
do you ping the domain name or the DC name? If domain name, what you see is normal, a DC will be chosen via DNS round robin and NOT a DC in that site.
Also assure that you have configured AD sites and services according to
http://technet.microsoft.com/en-us/library/cc730868.aspx
http://technet.microsoft.com/en-us/library/cc755768.aspx
http://blogs.technet.com/b/askds/archive/2011/04/29/sites-sites-everywhere.aspx
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Change Smart View default colours for all clients

I need to change Smart View default colours. But it must be done in a centralized way, so I can not set it up at the client level. I'm not sure if Smart View takes defaults from planning.css styles, or if they're defined somehow at the provider, or maybe specified in client installer.
Thank you in advance for any guidance on this.
SD

SD,
You may want to work with Oracle SmartView Support, to see if / how it is possible for SmartView, using a Service Request.
Thanks!

Discover DNS setting for all client PC's in my local LAN

Similar Messages

Maybe you are looking for