Disintegration of the material while doing GRN

We receive the material in the Container Boxes and charged for the whole box.
Each Box in turn contains 2000 different raw materials in predecided quantity.
How can we establlish a scenarion in which we will do the GRN of the whole Box but the inventory of the 2000 raw materials in the box will get updated as per the predecided quantity.
E.g Each box conatins 3 raw materials (RM1, RM2 and RM3) in quantities as follows
RM1 -- 20 Nos
RM2 -- 5 Nos
RM3 -- 1 EA
Now when I do the GRN for the Box my inventory for the Box goes up by 1
Material    Stock
Box           1 Ea
RM1          0 Nos
RM2          0 Nos
RM3          0 Ea
Now what to do to convert this one box into different raw materials like following
Material   Stock
Box           0   Ea
RM1          20 Nos
RM2          5   Nos
RM3          1 Ea
regards,
Akshay

Jurgen,
We are working in Aerospace industry.
We receive a kit containing all the required 2000 parts for manufacturing a single aircraft.
Our order and prices are dealt in Kits and not in the component parts. So we creat a PO for the required no of Kits and receive the materials as kits. Then we open the kit and store the 2000 components in seperate bins in the stores.
Now to GRN will always be for the X no of Kits. The issue is how to convert this GRN of X no of kits into proportinate no of components, so that we can monitor the inventory of the components.
Currently we do it manually. We are now switching to SAP. How to handle the same in SAP now??
regards,
Akshay

Similar Messages

Capture Transporters Details while doing GRN

I want to capture the Transporter's details while doing the GRN because the vendor will be finalised while receiving the materials. So what are the required configuration needs to done.

Hi
The same scenario we faced and we have added one more TAB at header level ( same like SAP standard GENERAL TAB ) in the MIGO screen , User will enter the relevant detials in the tab while doing GRN which contains multiple fields like vehicle no, transporter name,packages,etc as per the business requirement
The same external tab related details will be stored in a ztable with client , material document and year as primary key along with the other fields. For reporting purpose link the MSEG/MKPF Table along with this custom table
Regards
Amuthan M
Edited by: Amuthan M on Apr 6, 2010 6:47 PM

While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST

Assigning of values to the charecteristics while doing GR

Dear Gurus
I have created a charecteristic and assigned it to a class of classtype 23 (batch class).I assigned this class to a material.Now while doing GR of this material through TCODE MB1C and movement type 561 the system is giving the automatic batch number.But it is not giving any options for assigning the values for the charecteristic that I have kept in the class.How to assign the value while doing GR ?.I am able to assign the value by going to TCODE MSC2N.
Regards
Sandip Sarkar

Hi Sandip,
One option will be mark all those characteristics as Entry Required in T.code CT04.
So that you will get a warning msg. during GR if value is not maintain.
Msg. No is LB045 and msg is,
The characteristic values for the batch are incomplete.
If required you can convert that warning msg to Error also.
You can do it by using T.code OCHS.
But keep notice that you have to go that Classification tab manually - there is no other option in
Regards,
Dhaval

The material code does not exist or is not activated

Dear All,
I am using SAP ECC6. When I go through MM03 for certain material code, it gives the error: The material code does not exist or is not activated.
But this code exists in MARA. There seems to be no problem in the fields of MARA.
Where the problem can be?
Regds
Amit

do you know when and how the material was created?
Maybe the material is stored with a key that does not anymore fit to the customizing.
In SE16 in menu Settings > user parameter check if you have a flag in field conversion exit., if yes, then remove it and display this material along with other materials that you can access with MM03 in one list.
Check if the material number is different from the others (e.g. with or without leading zeros)

Getting the error while doing PGI for depot delivery

Hi
I am getting the below error while doing PGI for Depot delivery. This error is happening only when I taking the materials from stock transfer order which has more than 10 line items. Same issue is not happening when I am taking one material in Stock transfer order in & same material in depot delivery. Please see the screen shots below attachment. I have already maintained no range for the object J_1IDEPINV for year 2014.
Regards
PK

Moved from SAP ERP SD Sales to Internationalization and Unicode. Please post all your CIN related queries here. Also ensure that before posting, you made efforts in searching in SCN or Google. The reason for this indication is the issue you posted has already been discussed many times here and you will get some clue had you searched.
G. Lakshmipathi

Batchwise consumption of material while doing GR - MIGO

Dear All
I am facing a problem in auto picking of batch while doing GR - MIGO against a PO ( Subcontracting PO ).
We have a RM on which batch is applicable.
At the time of doing GR of FG of this RM against PO , system will not auto pick the batch i have to press the button "Determine Stock" on GR screen MIGO.
Kindly let me knwow how can i automate the same.
Thanx N Regards
Dinesh Kumar
Edited by: dinesh Kumar on Jul 3, 2008 1:42 PM

Hi,
Error message you are getting is because , Inpsection lot has been created for this PO
Please verify the inspection set up for this material. Unless you clear the inspection lot ( UD) , you can not do the GR & Find out which type of inspection lot generated ( 01, 08 , etc).
Thanks,
Rajanikanth

Error while doing GRN

I have created one Material/article
where batch is specified
inventory is maintained in batches. Batch wise valuation is maintained in the system. means each batch wil be a seperate valuation type.
after creating the material, i hv created Purchase Order for this Material/article for 100 pieces.
now i am doing GR for this Purchase Order
qty received for this PO is 150
but my system is not accepting GRN for this PO
is there any config related error?
Note : there is Releasing strategy applicable. Once PO is released we are not having the authorisation for changing this PO
How can i resolve this error
Regards,
Venkat
Ph: 9990417848

Setting Message as Warning will Create Problems in Future. I think this is as Poor Solution.
What You can do is Check Set Tolerance limitsin SPRO Once.
You can Check Tolerances in Material Master, Info Record, Purchase Order item Detail tabs.
If you want to Receive Over Delivery change the Over Delivery tolerance in PO or activate Unlimited Delivery.
As you said Po is already released and No more changes can be carried out Cancel the Release and Change the Over Delivery tolerance in PO and try again

Default price while doing GRN

I have a created a PO of services. While doing the GRN of the services in ML81N the price which was kept in PO is not getting accepted. I have service master in this PO. How to resolve it

In the ML81N screen, clcik on the "Serv. Selection" button and then adopt the services from the PO.
Then the price that was maintained in the services tab will flow.

Inclusion of planned cost to the material while Invoicing

Hi Everyone,
We are facing a problem, kindly guide me to solve it:
We are purchasing 'X' Material (split valuated) through a Purchase Order in which we did not provide any planned cost.
But after GR we came to know that planned cost should also have been entered in the PO. But in the PO, while creation we did not select any planned cost line for the item. So after approval of PO and GR, we were not able to enter any planned cost.
Now while adding up planned cost during Invoicing through MIRO, we are facing an error message:
Error saving valuation data for material P1S002 0002
Message no. M8829
Diagnosis
Error occurred when the system tried to save the valuation data.
Please guide me how to do invoicing by including the planned cost and booking the planned cost in the material.
Thanks and Regards
Edited by: MP Vashishth on Jan 10, 2011 2:21 PM

Hi,
Thanks for your reply please.
When i am trying to enter this freight value in the Material Tab, i am facing an error message :
Error saving valuation data for material P1S002 0002
Message no. M8829
Diagnosis
Error occurred when the system tried to save the valuation data.
Procedure
Contact your system administrator.
Please guide.
Thanks and Regards

While doing GRN from Sub contracting materials with excise related

Deear experts,
I have an issue related to subcontracting process.I created sub con p.o for this i am issuing goods using 541 mov type & capturing sub challan .But while making GRN the excise tab is opening here i have to key in challan number .I maintained the challan number in EXCEL Sheet with more numbers ,now i have to copy the challan number in excise tab here i am facing a problem while copying from excel its taking only 11 line items it will not copying from excel all.For this how to make setting kindly explain me or send me the link.At the time of reconcilling using J1IFQ is also the same it copying only 11 line items only .Please revert it back as soon as possible
Thanks In advance
visu

Hi,
Check the following settings
SPRO - Logistics General - Tax on Goods Movements - India - Business Transactions - Sub Contracting - Subcontracting Attributes.
Check the no: of EI items that you have mentioned for your Excise group in the above settings.
Thanks & Regards,

Double consumption of Material while doing Picking using COIK T. code.

Hi,
I have a component for process order which is WM managed and is withdrawn from storage type 100. The component qty is 1504 PC and the stock in storage type 100 is 199 PC. While doing COIK the system issues double the qty ( 398) of the component from storage type 100 against the process order resulting in -199 PC ( Negative) stock in storage type.
What could be the reason for this?
Regards,
Parasad

Hi,
Check whether the BOM & Receipe is maintain correctly in the PP & check from APO also the master data for the consumption of BOM & Activity,Whether the Qty is double or not.
Regards,
Raj

Error message while doing GRN

Dear Experts,
We are facing some "entern error" while doing MIGO of any PO. Also their is no message type and no. It's just say entern error.
Please guide us in this topic.
What I feel is someone has created this error message manually. So please guide us where do can we change this message into no message type.
Thanks and Regards
Raghav Puranik

Hi Raghav,
Please check it there is any user exist activated in your MIGO transaction. If you were coded any exit it will populate such a message.
Also, Let me know your message details,
Whether it is standard message or customized by business?
Please double click it on your error message and check it message application area..
Go to Transaction code SMOD - and deactivate your exit data if used anything.
Thanks,
Thiru

Zero stock available for material while doing outbound delivery

Hi ,
System gives error "0 pc of material XXX avaialble" Message no VL150 when we are doing outbound delivery for sales order. But MMBE & MB52 reports shows sales order stock for the same material. This is happening for particular material but the other material which is having same sttings in material masters & sales order & for the same plant is not having problem & OD has been created.
We are getting this error whiel posting very first outbound delivery for sales order.
Help to resolve thsi will be appreciated.
Regards
Basavaraj Patil

Hi,
Run MD04 for the XXX material and ensure there is no other open sales order / Stock transfer orders.
If appearing, delete it, if its not applicable and try creating out bound delivery..
Check if any safety stock is maintained for the said materials in the MRP view at the plant level, you might get similar error message, pl check.
Regards
Merwyn

How to find out the column causing the error while doing update or insert

I'm getting the below error when attempt to update or insert a long string that is more than its defined length in the DB2. For example in table the column length is defined as 50, however from UI the data for that column is more than 50 chars.
{color:#ff0000}**Caused by: com.ibm.db2.jcc.b.SqlException: DB2 SQL error: SQLCODE: -302, SQLSTAT**
**E: 22001, SQLERRMC: null**
**at com.ibm.db2.jcc.b.hh.b(hh.java:1369)**
**at com.ibm.db2.jcc.b.hh.c(hh.java:1356)**{color}
The above issue can be fixed by setting maxlength in the UI itself. However in my case, there is a backend program trying to insert or update load of records. If the exact column name causing the error is known, it will be helpful to load the data properly in the next attempt.
I have worked around it using SQLWarning and DataTruncation, but couldn't find the solution yet.
Any help on this issue will be really appreciated.

Medraf wrote:
what is validator? Is it like validation.xml in struts? Are you suggesting like defining set of validation rules in the xml and apply the same for each record before doing any update or insert in DB? If so, then I could implement this validation logic in my backend code, however it may take more time to complete the batch prcoess.
How you implement doesn't matter.
However given a schema generating code for such validation is trivially simple at least for field types and sizes. Relationships are harder but those can be handled via custom rules.
Alternatively I'm looking for some kind of API in JDBC or Hibernate which gives the detailed sql exception message containing the error info like the column name and the reason for failure while update or insert. If not possible, then validation logic needs to be implemented.Having seen something similar in Oracle years ago I seriously doubt that you are going find it magically appearing in JDBC/hibernate. There might be warning on the SQLException (see the java docs for SQLException) but I wouldn't count on it. Other than that the only possibility is making some sort of call in db2 itself that tells you the error. Only problem with that is it might require the context which might not be available once you see the error (presuming, especially for performance, that you are using batch processing.)
As a start figure out how to find out using only db2 (docs and/or db2 forums.)

Disintegration of the material while doing GRN

Similar Messages

Maybe you are looking for