Dispatcher
Hi All,
In my system their is only one dispatcher .... due to listener issue
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 233: Unknown error
i increased my dispatcher from 1 to 5... using command
alter system set DISPATCHERS = '(protocol=tcp)(dispatchers=5)';
But when i restart my DB and check the dispatcher in V$dispatcher .. it is showing only one dispatcher...
How can i fix my dispatcher permanently....
Thanx
Mani
The command you had given will be in effect only till db shutdown, if using pfile.
You have to set it in init.ora parameter file to set it permanently, else you will get the same error, everytime another dispatcher is trying to load.
Siva
Similar Messages
-
Dispatcher dies after 1 minute
Hi,
I am on ERP2005 SR2, with Windows 2003 and MSSQL 2005 DB.
I have recently performed a database restore of the SAP database, but I am not able to restart SAP after this.
The dispatcher dies after about 1 minute. You will find the dev_disp and dev_w0 files below:
dev_disp file:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid T01
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 83
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4204
Thu Feb 08 09:02:37 2007
kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4204) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 83 successfully loaded
shared lib "dw_xtc.dll" version 83 successfully loaded
shared lib "dw_stl.dll" version 83 successfully loaded
shared lib "dw_gui.dll" version 83 successfully loaded
shared lib "dw_mdm.dll" version 83 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Feb 08 09:02:41 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5277]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapr3s_T01_00 <
DpShMCreate: sizeof(wp_adm) 11648 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000BDA0050, size: 5320400)
DpShMCreate: allocated sys_adm at 000000000BDA0050
DpShMCreate: allocated wp_adm at 000000000BDA1AB0
DpShMCreate: allocated tm_adm_list at 000000000BDA4830
DpShMCreate: allocated tm_adm at 000000000BDA4890
DpShMCreate: allocated wp_ca_adm at 000000000C217030
DpShMCreate: allocated appc_ca_adm at 000000000C21B680
DpShMCreate: allocated comm_adm at 000000000C21CDF0
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000C2A3A70
DpShMCreate: allocated gw_adm at 000000000C2A3AF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000C2A3B20
DpShMCreate: allocated wall_adm at 000000000C2A3B30
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Thu Feb 08 09:02:42 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( sapr3s) [dpxxdisp.c 11644]
DpStartStopMsg: send start message (myname is >sapr3s_T01_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 83
Release check o.K.
Thu Feb 08 09:03:22 2007
ERROR => W0 (pid 4732) died [dpxxdisp.c 14299]
ERROR => W1 (pid 2544) died [dpxxdisp.c 14299]
ERROR => W2 (pid 412) died [dpxxdisp.c 14299]
ERROR => W3 (pid 4944) died [dpxxdisp.c 14299]
ERROR => W4 (pid 2760) died [dpxxdisp.c 14299]
ERROR => W5 (pid 1004) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 4104) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2208) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3300) died [dpxxdisp.c 14299]
ERROR => W9 (pid 3312) died [dpxxdisp.c 14299]
ERROR => W10 (pid 4412) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4112) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 4336) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:32 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Feb 08 08:03:32 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4732 Ended no 1 0 0
1 DIA 2544 Ended no 1 0 0
2 DIA 412 Ended no 1 0 0
3 DIA 4944 Ended no 1 0 0
4 DIA 2760 Ended no 1 0 0
5 DIA 1004 Ended no 1 0 0
6 UPD 4104 Ended no 1 0 0
7 ENQ 2208 Ended no 1 0 0
8 BTC 3300 Ended no 1 0 0
9 BTC 3312 Ended no 1 0 0
10 BTC 4412 Ended no 1 0 0
11 SPO 4112 Ended no 1 0 0
12 UP2 4336 Ended no 1 0 0
Dispatcher Queue Statistics Thu Feb 08 08:03:32 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu Feb 08 08:03:32 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Feb 08 08:03:32 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:37 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapr3s_T01_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2584) (SOFT_KILL)
Stop icman
killing process (4720) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2584 HANDLE:516)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:38 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2584 HANDLE:516)
wait for end of icman
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:39 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:40 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:41 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:42 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:43 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:44 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:45 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:46 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:47 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:48 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:49 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4720 HANDLE:528)
DpStartStopMsg: send stop message (myname is >sapr3s_T01_00 <)
NiIMyHostName: hostname = 'sapr3s'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Feb 08 09:03:50 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11957]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 452 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 452 (pos=2)
SiSelNRemove: removed sock 452
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 452
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4204) [dpxxdisp.c 10317]
Good Bye .....
DEV_W0 file:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Feb 08 09:02:42 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.81)
B New connection 0 created
M sysno 00
M sid T01
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 83
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 4732
M
M kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4732) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11648 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5320400)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA4830
M DpShMCreate: allocated tm_adm at 000000000DDA4890
M DpShMCreate: allocated wp_ca_adm at 000000000E217030
M DpShMCreate: allocated appc_ca_adm at 000000000E21B680
M DpShMCreate: allocated comm_adm at 000000000E21CDF0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A3A70
M DpShMCreate: allocated gw_adm at 000000000E2A3AF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A3B20
M DpShMCreate: allocated wall_adm at 000000000E2A3B30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 08 09:02:43 2007
M ThInit: running on host sapr3s
M
M Thu Feb 08 09:02:44 2007
M calling db_connect ...
C Thread ID:2008
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 81
C patchcomment Connection check on (0,0) (988711)
C np:(local) connection used on SAPR3S
C CopyLocalParameters: dbuser is 't01'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10205]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapr3s_T01_00 on host sapr3s (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Feb 08 09:02:44 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10404
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4732) [dpnttool.c 327]
Please let me know what to do!
Best Regards,
ThomasHi!
Check that all enviroment variables are complete and still in place?
JAVA_HOME and DBMS_TYPE and so on
Also check that all exe files are of the same version, if not, make sure they are.
You could also try to update disp+work
rollo -
When i start my Dispatcher i am getting the following error and it is in Yellow colour. Pls help me in this
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BW7
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 5144
Mon Apr 23 13:25:45 2007
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5144) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >blrkecesbibw_BW7_01 <
DpShMCreate: sizeof(wp_adm) 22528 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07080040, size: 4657592)
DpShMCreate: allocated sys_adm at 07080040
DpShMCreate: allocated wp_adm at 07081E40
DpShMCreate: allocated tm_adm_list at 07087640
DpShMCreate: allocated tm_adm at 07087670
DpShMCreate: allocated wp_ca_adm at 07456910
DpShMCreate: allocated appc_ca_adm at 0745C6D0
DpShMCreate: allocated comm_adm at 0745E610
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 074DF4D0
DpShMCreate: allocated gw_adm at 074DF510
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 074DF540
DpShMCreate: allocated wall_adm at 074DF548
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 8188
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1629
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( blrkecesbibw) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >blrkecesbibw_BW7_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Mon Apr 23 13:25:48 2007
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Apr 23 13:26:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:26:45 2007
J2EE server info
start = TRUE
state = STARTED
pid = 3764
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1713
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:27:05 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:27:25 2007
J2EE server info
start = TRUE
state = STARTED
pid = 5504
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1719
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:27:45 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:28:05 2007
J2EE server info
start = TRUE
state = STARTED
pid = 6008
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1730
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:28:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:28:45 2007
J2EE server info
start = TRUE
state = STARTED
pid = 1900
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1735
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:29:05 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:29:25 2007
J2EE server info
start = TRUE
state = STARTED
pid = 7468
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1741
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:29:45 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:30:05 2007
J2EE server info
start = TRUE
state = STARTED
pid = 8000
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1750
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:30:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:30:45 2007
J2EE server info
start = TRUE
state = STARTED
pid = 7668
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1757
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:31:05 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:31:25 2007
J2EE server info
start = TRUE
state = STARTED
pid = 3868
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1764
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:31:45 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:32:05 2007
J2EE server info
start = TRUE
state = STARTED
pid = 6640
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1773
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:32:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWNthe following is teh Dev_wo trace file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 23 13:51:31 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 01
M sid BW7
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3012
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3012) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Apr 23 13:51:32 2007
M DpShMCreate: sizeof(wp_adm) 22528 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07880040, size: 4657592)
M DpShMCreate: allocated sys_adm at 07880040
M DpShMCreate: allocated wp_adm at 07881E40
M DpShMCreate: allocated tm_adm_list at 07887640
M DpShMCreate: allocated tm_adm at 07887670
M DpShMCreate: allocated wp_ca_adm at 07C56910
M DpShMCreate: allocated appc_ca_adm at 07C5C6D0
M DpShMCreate: allocated comm_adm at 07C5E610
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 07CDF4D0
M DpShMCreate: allocated gw_adm at 07CDF510
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 07CDF540
M DpShMCreate: allocated wall_adm at 07CDF548
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host blrkecesbibw
M
M Mon Apr 23 13:51:33 2007
M calling db_connect ...
C Thread ID:5412
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on BLRKECESBIBW
C CopyLocalParameters: dbuser is 'bw7'
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C Provider Release:08.10.1830
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 500 dynamic statements (2844000 bytes), total 34364068 bytes
C Using shared procedure name cache BLRKECESBIBW_BW7BW7_BW7_MEM initialized by another process.
C Connected to db server : [BLRKECESBIBW] server_used : [np:(local)], dbname: BW7, dbuser: bw7
C pn_id:BLRKECESBIBW_BW7BW7_BW7
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070423 135133 BLRKECESBIBW
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Apr 23 13:51:35 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0CD00040, size: 4400000)
M SHM_ROLL_AREA (addr: A2110040, size: 143360000)
M SHM_PAGING_AREA (addr: 103F0040, size: 65536000)
M SHM_ROLL_ADM (addr: 0D140040, size: 1432040)
M SHM_PAGING_ADM (addr: 0D2A0040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0D330040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0D3C0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 16, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 154200C8, size: 30000000, end: 170BC448)
B dbtbxbuf: Buffer TABLP (addr: 170C00C8, size: 10240000, end: 17A840C8)
B dbexpbuf: Buffer EIBUF (addr: 17A900D0, size: 4194304, end: 17E900D0)
B dbexpbuf: Buffer ESM (addr: 17EA00D0, size: 4194304, end: 182A00D0)
B dbexpbuf: Buffer CUA (addr: 0FC200D0, size: 3072000, end: 0FF0E0D0)
B dbexpbuf: Buffer OTR (addr: 182B00D0, size: 4194304, end: 186B00D0)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 05C427B0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1C7200A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1C7204F0
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 21 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 11740kb, dir_size: 11676kb.
A Attached to PXA (address AA9E0040, size 350000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=5731C000 leng=20955136 end=58718000)
A >> Shm MMADM area (addr=57791EB8 leng=126176 end=577B0B98)
A >> Shm MMDAT area (addr=577B1000 leng=16150528 end=58718000)
A RFC Destination> destination blrkecesbibw_BW7_01 host blrkecesbibw system BW7 systnr 1 (blrkecesbibw_BW7_01)
A RFC Options> H=blrkecesbibw,S=01,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 16892 bytes at 0FF90040
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\BW7\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\BW7\DVEBMGS01\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.75.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
S
S Mon Apr 23 13:51:36 2007
S server @>SSRV:blrkecesbibw_BW7_01@< appears or changes (state 1)
C The IRow interface is supported by this OLEDB provider
M
M Mon Apr 23 13:51:37 2007
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 06060040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 060607A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 060607E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 060607EC
B
B Mon Apr 23 13:51:51 2007
B table logging switched off for all clients
S
S Mon Apr 23 13:56:51 2007
S found spool memory service RSPO-ACTIONS at 1C729BB8 -
Problem Using HTTP Dispatcher -- Could Not able to get the data in JSP
Hi, I am using HTTP Dispatcher to send my events to particular URL which is a JSP page. I am trying to populate the received event through URL and populate to a oracle data base. But could not able to get the data in Oracle database.
Code is :
<h1>JSP Page</h1>
<%
long type = 0;
String tagId = null;
String timeStr = "0";
String deviceName = "";
// Get Event Parameters
// Available Parameters: id, siteName, deviceName, data, time, type, subtype, sourceName, correlationId
try
type = Long.parseLong(request.getParameter("type")); // Get type
tagId = request.getParameter("id"); // Get tagId
timeStr = request.getParameter("time"); // Get time
deviceName = request.getParameter("deviceName");
catch (Exception e)
out.println( "Error: "+e.getMessage() );
// Write into DB.
try {
if ((tagId == null) || (type != 200) ){
// Do Nothing
//return;
} else {
OracleDataSource ods = new OracleDataSource();
String URL = "jdbc:oracle:thin:@//3.235.173.16:1525/vislocal";
ods.setURL(URL);
ods.setUser("cus");
ods.setPassword("cus");
Connection myConn = ods.getConnection();
Statement stmt = myConn.createStatement();
String selectQuery =
"SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
"cus.rfid_raw_reads ";
ResultSet rs = stmt.executeQuery(selectQuery);
String maxId = "1";
if (rs.next()) {
maxId = rs.getString(1);
String selectMaxTagIDQuery =
"SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
"cus.rfid_raw_reads WHERE tag_id = '" + tagId + "'" ;
stmt = myConn.createStatement();
rs = stmt.executeQuery(selectMaxTagIDQuery);
String maxTagId = "1";
if (rs.next()) {
maxTagId = rs.getString(1);
long primaryKey = 1;
long tagKey = 1;
try {
primaryKey = Long.parseLong(maxId) + 1;
tagKey = Long.parseLong(maxTagId) + 1;
} catch (Exception e) {
long currentTime = System.currentTimeMillis();
long updateKey = (tagKey - 1);
String updateQuery = " UPDATE cus.rfid_raw_reads SET read_end_time = " + currentTime + " WHERE rfid_raw_reads_id = " + updateKey;
Statement updateStmt = myConn.createStatement();
updateStmt.execute(updateQuery);
String query =
"INSERT INTO cus.rfid_raw_reads (rfid_raw_reads_id, tag_id,device_name,read_start_time) VALUES ("+ primaryKey + ",'" + tagId + "'," + deviceName + "'," + System.currentTimeMillis() + " )" ;
Statement insertStmt = myConn.createStatement();
insertStmt.execute(query);
myConn.commit();
myConn.close();
} catch (Exception e) {
%>
<p>For browser debug:
<%
out.println( "Type="+type+" ID="+tagId +" time="+timeStr );
%>
Kindly suggest where is the problem...
Thanks and regards
Mohammad Nasim AkhtarHI Prabhat,
Thanx for your reply, I worked out and able to receive the data in oracle database, Actually there was some problem in insert Query. Now I have tested the same... and able to edit the same in the Database.....
But I am facing a new problem, Http Dispatcher in SES console is displaying all the Events generated as well as event in Que but there is no events in the Event Send. I guess it is not able to send the events.....?????
Event statical is showing like this
Events Received: 0 (0.00/sec)
Events Generated: 311 (0.19/sec)
Events Sent: 2 (0.19/sec)
Queued Events: 309 (0.19/sec)
Kindly suggest where is the problem, Is it a JSP problem or OSES end problem.....
Thanks and regards
Nasim -
Unable to start java engine: dispatcher status is "yellow" in windows2003
Hi Gurus,
we have installed ECC6 in windows 2003.
we are getting an error while starting java engine, dispatcher node is in yellow colour with a message
"J2EE status info unavailable"
and dev_disp says "<<
trc file: "dev_disp", trc level: 1, release: "700"
sysno 04
sid ECC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, optimized
pid 3688
Wed Apr 22 18:22:22 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (04 3688) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3904
Wed Apr 22 18:22:25 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 3 seconds
Wed Apr 22 18:22:29 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ECC6_ECC_04 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 09310040, size: 4930904)
DpShMCreate: allocated sys_adm at 09310040
DpShMCreate: allocated wp_adm at 09312090
DpShMCreate: allocated tm_adm_list at 09316980
DpShMCreate: allocated tm_adm at 093169B0
DpShMCreate: allocated wp_ca_adm at 097294B0
DpShMCreate: allocated appc_ca_adm at 0972F270
DpShMCreate: allocated comm_adm at 097311B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 097B2070
DpShMCreate: allocated gw_adm at 097B20B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 097B20E0
DpShMCreate: allocated wall_adm at 097B20E8
Wed Apr 22 18:22:30 2009
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 5052
argv[0] = F:\usr\sap\ECC\DVEBMGS04\exe\jcontrol.EXE
argv[1] = F:\usr\sap\ECC\DVEBMGS04\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\ECC\SYS\profile\ECC_DVEBMGS04_ECC6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=04
argv[6] = -DSAPSYSTEMNAME=ECC
argv[7] = -DSAPMYNAME=ECC6_ECC_04
argv[8] = -DSAPPROFILE=F:\usr\sap\ECC\SYS\profile\ECC_DVEBMGS04_ECC6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( ECC6) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >ECC6_ECC_04 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Wed Apr 22 18:22:31 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 480
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2089) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5052)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Wed Apr 22 18:23:10 2009
J2EE server info
start = TRUE
state = STARTED
pid = 4104
argv[0] = F:\usr\sap\ECC\DVEBMGS04\exe\jcontrol.EXE
argv[1] = F:\usr\sap\ECC\DVEBMGS04\exe\jcontrol.EXE
argv[2] = pf=F:\usr\sap\ECC\SYS\profile\ECC_DVEBMGS04_ECC6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=04
argv[6] = -DSAPSYSTEMNAME=ECC
argv[7] = -DSAPMYNAME=ECC6_ECC_04
argv[8] = -DSAPPROFILE=F:\usr\sap\ECC\SYS\profile\ECC_DVEBMGS04_ECC6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Wed Apr 22 18:23:11 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 7 / sock 416
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2166) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4104)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
>>
Kindly, help.
Thanks & Regards,
Devender VHi Community,
I have to warm this topic again.
I'm facing the same problem like devender. I followed the posted advices, whithout any change. I also checked note 741289 - no change. I restarted the j2ee engine out of TA SMICM where I also checked the application server's state (j2ee Server Operational = FALSE) - no effect.
In SAPMMC I restarted the instance without any effect. The disp+work.EXE still has a yellow state, says "Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailabe.
I think the developer trace says the same like devenders:
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1668]
***LOG Q0K=> DpMsAttach, mscon ( chopin) [dpxxdisp.c 12364]
DpStartStopMsg: send start message (myname is >chopin_EI3_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 175
Release check o.K.
Fri Nov 12 11:34:00 2010
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
I followed ravi raj's instructions, so that is the part of the content of dev_jontrol:
[Thr 6844] *** WARNING => JsfOpenShm: ShmCreate (69, 295952, CREATE) failed(rc = 4 SHM segment already exists) [jsfxxshm.c 715]
[Thr 6844] *** ERROR => JsfOpenShm: Shm version mismatch (shm "JSF-ADM-CORRUPT", code "JSF-ADM-015") [jsfxxshm.c 761]
[Thr 6844] *** ERROR => Can't create shared memory segment 69 (rc = 8) [jcntrxx.c 1749]
[Thr 6844] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 273]
[Thr 6844] JControlCloseProgram: started (exitcode = -1)
[Thr 6844] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 6844] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 6844] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
[Thr 6844] JControlCloseProgram: good bye... (exitcode = -1)
Can someone please translate it for me, or give me an tipp what to do?
Thanks in advance,
-ty-
Edited by: Tan Yildiz on Nov 12, 2010 1:38 PM
In the servers process-list (Task Manager) there is no entry for jlaunch (related to [Java Startup und Control Framework|http://help.sap.com/saphelp_NW70/helpdata/de/4f/7ead42c893b211e10000000a155106/content.htm] )
Edited by: Tan Yildiz on Nov 12, 2010 2:18 PM
There's the solution manager running on the same server. In his instance everything's fine.
After changing some instance parameters i'm getting some errors:
1. Parameter Name: jstartup/instance_properties
General standardvalue: $(jstartup/j2ee_properties)$(FILE_SEP)$(jstartup/sdm_propert
Specified standardvalue: D:\usr\sap\EI3\D00\j2ee\cluster\instance.properties;D:\usr\s
2. Parameter Name: exe/j2ee
General standardvalue: (Default)
Specified standardvalue. D:\usr\sap\EI3\SYS\exe\run\jcontrol.EXE
Ok, I think I got it. The specified standardvalues the system is selecting are wrong.....but how can I influence the systems selection?
Edited by: Tan Yildiz on Nov 12, 2010 2:29 PM
Edited by: Tan Yildiz on Nov 12, 2010 2:42 PM -
After installing 4.7 the dispatcher is getting stopped
hi gurus, i am installing 4.7 after installation i got the message like successfully complted , when iam trying to start the MMC but the dispatcher is getting stopped please check this log -
trc file: "dev_disp", trc level: 1, release: "620"
Tue Jan 08 14:21:04 2008
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 300
***LOG Q00=> DpSapEnvInit, DPStart (00 300) [dpxxdisp.c 966]
shared lib "dw_xml.dll" version 252 successfully loaded
shared lib "dw_xtc.dll" version 252 successfully loaded
shared lib "dw_stl.dll" version 252 successfully loaded
Tue Jan 08 14:21:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3140]
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 916 MB
<ES> 915 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( dev) [dpxxdisp.c 8832]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Tue Jan 08 14:21:10 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Tue Jan 08 14:22:09 2008
ERROR => W0 (pid 892) died [dpxxdisp.c 11210]
ERROR => W1 (pid 616) died [dpxxdisp.c 11210]
Tue Jan 08 14:22:29 2008
ERROR => W2 (pid 964) died [dpxxdisp.c 11210]
ERROR => W3 (pid 1032) died [dpxxdisp.c 11210]
ERROR => W4 (pid 1064) died [dpxxdisp.c 11210]
ERROR => W5 (pid 736) died [dpxxdisp.c 11210]
ERROR => W6 (pid 1128) died [dpxxdisp.c 11210]
ERROR => W7 (pid 1184) died [dpxxdisp.c 11210]
ERROR => W8 (pid 1152) died [dpxxdisp.c 11210]
ERROR => W9 (pid 1360) died [dpxxdisp.c 11210]
ERROR => W10 (pid 548) died [dpxxdisp.c 11210]
ERROR => W11 (pid 1396) died [dpxxdisp.c 11210]
ERROR => W12 (pid 1404) died [dpxxdisp.c 11210]
ERROR => W13 (pid 1408) died [dpxxdisp.c 11210]
ERROR => W14 (pid 1416) died [dpxxdisp.c 11210]
ERROR => W15 (pid 1428) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Tue Jan 08 14:22:36 2008
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 300) [dpxxdisp.c 7637]
cheersHi kaushal ,
here dis is the log file which u asked
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue Jan 08 15:03:01 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'E:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'E:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.112)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 396
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 396) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Tue Jan 08 15:03:02 2008
X EmInit: MmSetImplementation( 2 ).
X
X Tue Jan 08 15:03:03 2008
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Tue Jan 08 15:03:06 2008
M calling db_connect ...
C Got ORACLE_HOME=E:\oracle\ora81 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=02F5EE78,svrhp=02F5EC84)
C Starting user session (con_hdl=0,svchp=02F5EE78,srvhp=02F5EC84,usrhp=0612CB2C)
C
C Tue Jan 08 15:03:07 2008
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c 9536]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=02F5EE78,srvhp=02F5EC84,usrhp=0612CB2C)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c 9536]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server dev_DEV_00 on host dev (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue Jan 08 15:03:07 2008
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 396) [dpnttool.c 345] -
Error in SAP Installation , Dispatcher nto starting
Hi,
I am in the process of installaion of nW2004s in Ms SQL server .
When the Central instance is running , the sapinst could not restart the sap from sap management console.
When i tried to restart SAP from MMC the dispatcher gets stopped in 2 mins. Pls hlep
the folowing is the output of dev_disp file
Mon Mar 10 15:36:36 2008
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ****
***LOG Q00=> DpSapEnvInit, DPStart (01 3500) [dpxxdisp.c 1239]
* shared lib "dw_xml.dll" version 111 successfully loaded*
* shared lib "dw_xtc.dll" version 111 successfully loaded*
* shared lib "dw_stl.dll" version 111 successfully loaded*
* shared lib "dw_gui.dll" version 111 successfully loaded*
* shared lib "dw_mdm.dll" version 111 successfully loaded*
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Mar 10 15:36:41 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds*
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWD01_BWD_01 <
DpShMCreate: sizeof(wp_adm) 19248 (1480)
DpShMCreate: sizeof(tm_adm) 5584592 (27784)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F270050, size: 6275136)
DpShMCreate: allocated sys_adm at 000000000F270050
DpShMCreate: allocated wp_adm at 000000000F272150
DpShMCreate: allocated tm_adm_list at 000000000F276C80
DpShMCreate: allocated tm_adm at 000000000F276CE0
DpShMCreate: allocated wp_ca_adm at 000000000F7CA3B0
DpShMCreate: allocated appc_ca_adm at 000000000F7D0170
DpShMCreate: allocated comm_adm at 000000000F7D20B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F858D40
DpShMCreate: allocated gw_adm at 000000000F858DC0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F858DF0
DpShMCreate: allocated wall_adm at 000000000F858E00
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWD01) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >WDBSSAPBWD01_BWD_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Mar 10 15:37:21 2008
ERROR => W0 (pid 3864) died [dpxxdisp.c 14441]*
ERROR => W1 (pid 5556) died [dpxxdisp.c 14441]*
ERROR => W2 (pid 5388) died [dpxxdisp.c 14441]*
ERROR => W3 (pid 5568) died [dpxxdisp.c 14441]*
ERROR => W4 (pid 4200) died [dpxxdisp.c 14441]*
ERROR => W5 (pid 5520) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 5452) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2600) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 4220) died [dpxxdisp.c 14441]*
ERROR => W9 (pid 4212) died [dpxxdisp.c 14441]*
ERROR => W10 (pid 3628) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4176) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 5652) died [dpxxdisp.c 14441]*
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes*
DISPATCHER EMERGENCY SHUTDOWN ****
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:31 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Mar 10 19:37:31 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3864 Ended no 1 0 0
1 DIA 5556 Ended no 1 0 0
2 DIA 5388 Ended no 1 0 0
3 DIA 5568 Ended no 1 0 0
4 DIA 4200 Ended no 1 0 0
5 DIA 5520 Ended no 1 0 0
6 UPD 5452 Ended no 1 0 0
7 ENQ 2600 Ended no 1 0 0
8 BTC 4220 Ended no 1 0 0
9 BTC 4212 Ended no 1 0 0
10 BTC 3628 Ended no 1 0 0
11 SPO 4176 Ended no 1 0 0
12 UP2 5652 Ended no 1 0 0
Dispatcher Queue Statistics Mon Mar 10 19:37:31 2008
===========================
--------++++--+
| Typ | now | high | max | writes | reads |
--------++++--+
| NOWP | 0 | 2 | 2000 | 6 | 6 |
--------++++--+
| DIA | 5 | 5 | 2000 | 5 | 0 |
--------++++--+
| UPD | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| BTC | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| SPO | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
--------++++--+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon Mar 10 19:37:31 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Mar 10 19:37:31 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--+
| id | owner | pid | eyecatcher |
--------++--+
*| 0 | DISPATCHER | -1 | WPCAAD000 |*
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:36 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWD01_BWD_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4208) (SOFT_KILL)
Stop icman
killing process (3768) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4208 HANDLE:468)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4208 HANDLE:468)
wait for end of icman
[DpProcDied] Process lives (PID:3768 HANDLE:476)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=501
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 10 15:37:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3768 HANDLE:476)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=501Hi Balaji,
check errors on dev_w0 and post the here.
Regards
Juan -
Dev server the dispatcher is not getting start
Dear all ,
We are facing problem in dev server the dispatcher is not getting started. Plese suggest
The log file .
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Oct 05 08:43:39 2009
B create_con (con_name=R/3)
B Loading DB library 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 561 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 247
M intno 20020600
M make: multithreaded, Unicode, 64 bit
M pid 4936
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4936) [dpxxdisp.c 1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 38064 (1464)
M DpShMCreate: sizeof(tm_adm) 3609968 (17960)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 312000 (624)
M DpShMCreate: sizeof(vmc_adm) 0 (512)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D440050, size: 4077792)
M DpShMCreate: allocated sys_adm at 000000000D440050
M DpShMCreate: allocated wp_adm at 000000000D441C30
M DpShMCreate: allocated tm_adm_list at 000000000D44B0E0
M DpShMCreate: allocated tm_adm at 000000000D44B110
M DpShMCreate: allocated wp_ca_adm at 000000000D7BC680
M DpShMCreate: allocated appc_ca_adm at 000000000D7C2440
M DpShMCreate: allocated comm_adm_list at 000000000D7C4380
M DpShMCreate: allocated comm_adm at 000000000D7C43A0
M DpShMCreate: allocated vmc_adm_list at 000000000D810660
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000D810690
M DpShMCreate: allocated wall_adm at 000000000D8106A0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Oct 05 08:43:40 2009
M calling db_connect ...
C Prepending E:\oracle\DEV\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 000000000EE4FF20 000000000D0CDA90 000000000D0CD3C8
C Attaching to DB Server DEV (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C Starting user session (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78,usrhp=000000000EE71C70)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4508]
C Detaching from DB Server (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 11395]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 000000000EE4FF20 000000000D0CDA90 000000000D0CD3C8
C Attaching to DB Server DEV (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C
C Mon Oct 05 08:43:41 2009
C Starting user session (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78,usrhp=000000000EE71C70)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4508]
C Detaching from DB Server (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 11395]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#3 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9708]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server DEVDEV_00 on host DEVDEV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Mon Oct 05 08:43:41 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9893
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4936) [dpnttool.c 357]
Regards,
KumarHi Sunny,
Thanks , i have try to stop the database and then startup the database. Then it is giving me error
SQL> startup
ORACLE instance started.
Total System Global Area 1109237592 bytes
Fixed Size 737112 bytes
Variable Size 587202560 bytes
Database Buffers 520093696 bytes
Redo Buffers 1204224 bytes
Database mounted.
ORA-01113: file 3 needs media recovery
ORA-01110: data file 3: 'I:\ORACLE\DEV\SAPDATA3\DEV_1\DEV.DATA1'
Please suggest what next command to recovery database in oracle 9i.
Thanks,
Kumar -
Dispatcher running but queue standstill
Dear All,
in my production system, the dispatcher become yellow with message " running but queue standstill"
i try look up at dev_w0 file wp_halt three times. any one can help me with this situation?
the dev_w0 file as bellow. for your intention, it become normal/green by it self.
trc file: "dev_w0", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue Jan 20 14:48:52 2009
B create_con (con_name=R/3)
B Loading DB library 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll' ...
B Library 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll' is '46D.00'
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 534
M intno 0
M pid 6280
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 6280) [dpxxdisp.c 911]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M ThSysUsrCheck: clear T0
M calling db_connect ...
B find_con found the following connection for reuse:
B 0: name = R/3, concnt= 000000 state = DISCONNECTED, perm = YES, reco = NO
C Extended Fetch will be used
C Initializing shared procedure name cache (DBSP_BP3_MEM,2640040 bytes,20000 procs)
C procedure cache created/attached
C
C Tue Jan 20 14:48:57 2009
C Initializing shared TEMP procedure cache (DBSP_BP3_TSP,10560024 bytes,15000 procs)
C TEMP procedure cache created/attached
C Thank You for using the SLOLEDB-interface
C Connected to db server : [DBSP], dbname: BP3, dbuser: dbo
C Using dynamic link library 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 528
C patchcomment MSSQL: Long DBCON Dbnames, batch insert correction (393213)
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20090120 144852
M db_connect o.k.
I MtxInit: 0 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B ***LOG BB0=> buffer TABL started with length 10000000 bytes [dbtbxbuf1636 3]
B ***LOG BB0=> buffer TABLP started with length 005120000 bytes [dbbfe 0964 ]
B Layout of object buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 256 = 256
B 2: 54 * 20 = 1080
B 3: 20011 * 40 = 800440
B 4: 10000 * 128 = 1280000
B 5: 20011 * 4 = 80044
B 6: 1 * 100 = 100
B 7: 65 * 4 = 260
B 8: 143107 * 128 = 18317696
B ***LOG BB0=> buffer EIBUF started with length 20000k bytes [dbexpbuf1870 ]
B Layout of object buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 256 = 256
B 2: 54 * 20 = 1080
B 3: 5003 * 40 = 200120
B 4: 2500 * 128 = 320000
B 5: 5003 * 4 = 20012
B 6: 1 * 100 = 100
B 7: 193 * 4 = 772
B 8: 17881 * 256 = 4577536
B ***LOG BB0=> buffer CUA started with length 5000k bytes [dbexpbuf1870 ]
B db_con_shm_ini: WP_ID = 0, WP_CNT = 54
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf2166 ]
C The IRow interface is supported by this OLEDB provider
B
B Tue Jan 20 14:48:58 2009
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M PfReadDBVersion: use compatibility mode for stat-files
M PfInitShm: use compatibility mode for stat-files
M SsfSapSecin: automatic application server initialization for SAPSECULIB
M SsfSapSecin: Looking for PSE in database
M SsfPseLoad: started...(path=Y:\usr\sap\BP3\DVEBMGS03\sec, AS=appsp1, instanceid=03)
M SsfPseLoad: Downloading file Y:\usr\sap\BP3\DVEBMGS03\sec\SAPSYS.pse (client: , key: SYSPSE, len: 1579)
M SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
M rdisp/reinitialize_code_page -> 0
S
S Tue Jan 20 14:48:59 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 06F9CA80
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 6 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0F3A0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0F3A0CA0
S using messages for server info
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 2F930040, size 310213K)
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC Destination> destination appsp1_BP3_03 host appsp1 system BP3 systnr 3 (appsp1_BP3_03)
A RFC Options> H=appsp1,S=03
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=Y:\usr\sap\BP3\DVEBMGS03\sec): ok
M
M Tue Jan 20 14:49:00 2009
M SsfSapSecin: PSE Y:\usr\sap\BP3\DVEBMGS03\sec\SAPSYS.pse found!
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is Y:\usr\sap\BP3\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
E
E Tue Jan 20 14:49:12 2009
E Replication is disabled
S
S Tue Jan 20 14:49:13 2009
S found spool memory service RSPO-ACTIONS at 0F3A4EE8
B
B Tue Jan 20 14:50:36 2009
B ***LOG BB8=> buffer overflow when loading table AGR_TIME [dbtbxbuf2135 ]
B Overflow for table AGR_TIME in buffer 0
B
B Tue Jan 20 14:50:38 2009
B ***LOG BB8=> buffer overflow when loading table TOJTB [dbtbxbuf2135 ]
B Overflow for table TOJTB in buffer 0
S
S Tue Jan 20 14:51:05 2009
S handle memory type is RSTSPRIMEM
B
B Tue Jan 20 14:51:51 2009
B ***LOG BB8=> buffer overflow when loading table TSTCA [dbtbxbuf2373 ]
B Overflow for table TSTCA in buffer 0
B
B Tue Jan 20 14:54:28 2009
B ***LOG BB8=> buffer overflow when loading table TSTC [dbtbxbuf2135 ]
B Overflow for table TSTC in buffer 0
M
M Tue Jan 20 14:54:32 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
M
M Tue Jan 20 14:54:50 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
M
M Tue Jan 20 14:54:53 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
D
D Tue Jan 20 14:55:29 2009
D *** ERROR => DiagiBsDupSearch1 : wrong column offset [diaginp.c 2591]
D *** ERROR => Platform : WINDDOWS/NT [diagsrv.c 733]
D *** ERROR => transaction -> PA30 [diagsrv.c 755]
D *** ERROR => User: BRIS01949656 [diagsrv.c 769]
D *** ERROR => Display: sap-sidikalang [diagsrv.c 774]
M
M Tue Jan 20 15:04:57 2009
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 10125]
A Tue Jan 20 15:04:57 2009
A ABAP/4 Program SAPLOLEA .
A Source LOLEAU02 Line 27.
A Error Code RAISE_EXCEPTION.
A Module $Id: //bas/46D/src/krn/runt/abfunc.c#4 $ SAP.
A Function ab_jfune Line 1361.
A Exception condition "CNTL_ERROR" raised..
A
B
B Tue Jan 20 15:05:10 2009
B table logging switched on for client '300'
M
M Tue Jan 20 15:05:15 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
D
D Tue Jan 20 15:05:20 2009
D *** ERROR => DiagiBsDupSearch1 : wrong column offset [diaginp.c 2591]
D *** ERROR => Platform : WINDDOWS/NT [diagsrv.c 733]
D *** ERROR => transaction -> ZRPY [diagsrv.c 755]
D *** ERROR => User: KASIE_SENG [diagsrv.c 769]
D *** ERROR => Display: 33m1d1s [diagsrv.c 774]
M
M Tue Jan 20 15:09:52 2009
M ThResetMemStates: reset rolled in roll mem state
M ThResetMemStates: detach em memory
M *** WARNING => PfStatWrite: missing STAT_END for opcode 18
M
M Tue Jan 20 15:12:44 2009
M ***LOG R0K=> ThDelForMode, ExitMode (001BRIS04039656) [thxxmode.c 3525]
M
M Tue Jan 20 15:12:58 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
M
M Tue Jan 20 15:13:01 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
B
B Tue Jan 20 15:13:22 2009
B ***LOG BB8=> buffer overflow when loading table UST04 [dbtbxbuf2135 ]
B Overflow for table UST04 in buffer 0
M
M Tue Jan 20 15:14:42 2009
M ***LOG US3=> BRIS06879661 [sign.c 600]
M
M Tue Jan 20 15:22:55 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
M
M Tue Jan 20 15:27:55 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
M
M Tue Jan 20 15:28:08 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
X
X Tue Jan 20 15:31:08 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
S *** ERROR => no more memory for open spool handle [rspoooh.c 265]
S *** ERROR => cannot allocate spec char list cache entry [rspoooh.c 854]
S *** ERROR => cannot get a valid LSC [rspoooh.c 933]
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 10125]
A Tue Jan 20 15:31:08 2009
A ABAP/4 Program ZRPY02 .
A Source ZRPY02 Line 0.
A Error Code SPOOL_NO_CONVERSION.
A Module $Id: //bas/46D/src/krn/runt/abprint.c#22 $ SAP.
A Function spool_init (lsc lookup) Line 2759.
A Desired conversion not possible..
A
M
M Tue Jan 20 15:31:24 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
M
M Tue Jan 20 15:31:28 2009
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 380]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=6280)
When : 1/20/2009 15:31:28.984
Threads : 2
Comuter Name : APPSP1
User Name : SAPServiceBP3
Number of Processors: 8
Processor Type: x86 Family 6 Model 7 Stepping 6
Windows Version: 5.0 Current Build: 2195
State Dump for Thread Id 1780
eax=0ef2e098 ebx=00000000 ecx=0effd1a0 edx=00000000 esi=77f94086 edi=000004e4
eip=77f94091 esp=01d4ea60 ebp=01d4ea84 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : rstsc_close
00a0f84e e857450000 call rstssgs__set_global_state (00a13daa)
00a0f853 8b5d0c mov ebx,[ebp+0xc] ss:11c8da7e=20202020
00a0f856 3bdf cmp ebx,edi
00a0f858 59 pop ecx
00a0f859 59 pop ecx
00a0f85a 0f847b040000 je rstsc_close+0x4dc (00a0fcdb)
00a0f860 8b33 mov esi,[ebx] ds:00000000=????????
00a0f862 3bf7 cmp esi,edi
00a0f864 8975ec mov [ebp+0xec],esi ss:11c8da7e=20202020
00a0f867 0f846e040000 je rstsc_close+0x4dc (00a0fcdb)
FAULT-> 00a0f86d 8b06 mov eax,[esi] ds:77f94086=0000eab8
00a0f86f 3d204f444f cmp eax,0x4f444f20
00a0f874 7443 jz rstsc_close+0xba (00a0f8b9)
00a0f876 50 push eax
00a0f877 8d45cc lea eax,[ebp+0xcc] ss:11c8da7e=20202020
00a0f87a 6894993001 push 0x1309994
00a0f87f 50 push eax
00a0f880 ff1564a5c200 ds:00c2a564=780238ae
call dword ptr [_imp__sprintf (00c2a564)]
00a0f886 57 push edi
00a0f887 57 push edi
00a0f888 57 push edi
00a0f889 6a08 push 0x8
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
01d4f1d4 00939a22 00000000 67cf626c ffffffff 00000002 disp+work!rstsc_close
01d4f204 0093a286 02bcb070 ffffffff 00e66d98 00000000 disp+work!SpOOHBeforeRollback
01d4f224 00456e6b 00000002 01d4f254 0148255c 780238ae disp+work!SpInitOOHHooks
01d4f240 0044208d 00000002 00000000 00000000 00000002 disp+work!ThCallHooks
01d4f254 0090d5d4 00000000 00000001 780238ae 00000000 disp+work!ThCheckComOrRb
01d4f278 0090cd1d 00000000 004422e1 ffffffff 490cc1aa disp+work!db_init
01d4f280 004422e1 ffffffff 490cc1aa 490cbfd8 01d4f390 disp+work!db_rollback
01d4f298 004420b1 00000001 00000000 490cc1aa 490cbfd8 disp+work!ThIRollBack
01d4f2b0 004cbe23 490cc1aa 490cbfd8 000000c8 00000000 disp+work!ThRBWork
490cc1aa 20202020 20202020 20202020 20202020 20202020 disp+work!dyGetDataR
20204e2f 00000000 00000000 00000000 00000000 00000000 <nosymbols>
State Dump for Thread Id 1588
eax=033efcbc ebx=00000103 ecx=00000012 edx=00000000 esi=00000000 edi=00000000
eip=77f87131 esp=033efc70 ebp=033efcb0 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function : ZwFsControlFile
77f87126 b848000000 mov eax,0x48
77f8712b 8d542404 lea edx,[esp+0x4] ss:1332ec6b=20202020
77f8712f cd2e int 2e
77f87131 c22800 ret 0x28
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
033efcb0 00ba98a4 00000224 00000000 00000244 01f15740 ntdll!ZwFsControlFile
033eff7c 780085bc 00000000 00000244 01d4fd68 01f15740 disp+work!SigILastSig
033effb4 7c4e987c 01f15740 00000244 01d4fd68 01f15740 MSVCRT!endthreadex
033effec 00000000 00000000 00000000 00000000 00000000 KERNEL32!SetThreadExecutionState
M -
M
M Tue Jan 20 15:31:29 2009
M call clean-up function ...
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = 1
M tid = 160
M mode = 0
M len = 293
M rq_id = 8479
M rq_source = 1
M last_tid = 160
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T160/M0
M
M tm state = 2
M uid = 230
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >PTG_RTG_API2<
M terminal = >WAHYUSUSETYO <
M client = >300<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 3
M mode state = 0x12
M th_errno = 11
M async_receives = 0
M cpic_receive = 0
M em handle = 124
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = >ZSLIP <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 67CF36A0
M
M Adresse Offset Data from input buffer
M -
M 03F57D70 000000 00000000 00000000 01500c00 00000000 |.........P......|
M 03F57D80 000016 00000000 00000000 00100409 00033436 |..............46|
M 03F57D90 000032 4410040f 00040000 03a90900 0b000000 |D...............|
M 03F57DA0 000048 00141970 5a137107 6600005a 00020171 |...pZ.q.f..Z...q|
M 03F57DB0 000064 13100c07 00100000 00120000 006e0000 |.............n..|
M 03F57DC0 000080 00130000 00711100 0000c93c 3f786d6c |.....q.....<?xml|
M 03F57DD0 000096 20766572 73696f6e 3d22312e 30222065 | version="1.0" e|
M 03F57DE0 000112 6e636f64 696e673d 22736170 2a223f3e |ncoding="sap*"?>|
M 03F57DF0 000128 203c4441 54414d41 4e414745 523e2020 | <DATAMANAGER> |
M 03F57E00 000144 3c434f50 59206964 3d22636f 7079223e |<COPY id="copy">|
M 03F57E10 000160 2020203c 47554920 69643d22 67756922 | <GUI id="gui"|
M 03F57E20 000176 3e202020 203c4d45 54524943 53206964 |> <METRICS id|
M 03F57E30 000192 3d226d65 74726963 73222059 30203d22 |="metrics" Y0 ="|
M 03F57E40 000208 33373722 20593120 3d223134 22205830 |377" Y1 ="14" X0|
M 03F57E50 000224 203d2233 37372220 5932203d 22323122 | ="377" Y2 ="21"|
M 03F57E60 000240 20583120 3d223722 20583220 3d223722 | X1 ="7" X2 ="7"|
M 03F57E70 000256 2f3e2020 203c2f47 55493e20 203c2f43 |/> </GUI> </C|
M 03F57E80 000272 4f50593e 203c2f44 4154414d 414e4147 |OPY> </DATAMANAG|
M 03F57E90 000288 45523e20 0c |ER> . |
M -
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appsp1_BP3_03 on host appsp1 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Tue Jan 20 15:31:29 2009
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 7831
M * COUNTER 1
M *
M *****************************************************************************
M
A
A ** RABAX: level LEV_RX_STANDARD failed.
A
A ** RABAX: level LEV_RX_MEMO_CHECK failed.
A
A ** RABAX: level LEV_SN_STATUS failed.
A
A ** RABAX: level LEV_SN_DYNPRO failed.
A
A ** RABAX: level LEV_SN_RFCERROR failed.
A
A ** RABAX: level LEV_SN_PROGRAMS failed.
A
A ** RABAX: level LEV_SN_EVENTS failed.
A
A ** RABAX: level LEV_SN_CODE failed.
A
A ** RABAX: level LEV_SN_DATA_ENV failed.
A
A ** RABAX: level LEV_SN_WALIST failed.
A
A ** RABAX: level LEV_SN_ITABS failed.
A
A ** RABAX: level LEV_RX_RFC_CLOSE failed.
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 INACTIVE NO YES NO 20090120 144852
B Disconnected from connection 0
B statistics db_con_commit (com_total=6842, com_forced=833, com_tx=833)
B statistics db_con_rollback (roll_total=102, roll_forced=2, roll_tx=2)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 6280) [dpnttool.c 300]
M return from clean-up function ...
trc file: "dev_w0", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue Jan 20 15:35:12 2009
B create_con (con_name=R/3)
B Loading DB library 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll' ...
B Library 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll' is '46D.00'
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 534
M intno 0
M pid 5840
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5840) [dpxxdisp.c 911]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
B find_con found the following connection for reuse:
B 0: name = R/3, concnt= 000000 state = DISCONNECTED, perm = YES, reco = NO
C Extended Fetch will be used
C
C Tue Jan 20 15:35:13 2009
C Using shared procedure name cache (DBSP_BP3_MEM,2640040 bytes,20000 procs) initialized by another process
C Using shared TEMP procedure cache (DBSP_BP3_TSP,10560024 bytes,15000 procs) initialized by another process
C Thank You for using the SLOLEDB-interface
C Connected to db server : [DBSP], dbname: BP3, dbuser: dbo
C Using dynamic link library 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 528
C patchcomment MSSQL: Long DBCON Dbnames, batch insert correction (393213)
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20090120 153512
M db_connect o.k.
I MtxInit: 0 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 54
M rdisp/reinitialize_code_page -> 0
M PfReadDBVersion: use compatibility mode for stat-files
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 06F81160
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 6 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0F2A0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0F2A0CA0
S using messages for server info
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 2F930040, size 310213K)
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC Destination> destination appsp1_BP3_03 host appsp1 system BP3 systnr 3 (appsp1_BP3_03)
A RFC Options> H=appsp1,S=03
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=Y:\usr\sap\BP3\DVEBMGS03\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is Y:\usr\sap\BP3\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
M ThCheckPrevUser: clean previous user T160/U230/M0
B
B Tue Jan 20 15:35:15 2009
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
C The IRow interface is supported by this OLEDB provider
E
E Tue Jan 20 15:35:19 2009
E Replication is disabled
M
M Tue Jan 20 15:35:27 2009
M ***LOG R0K=> ThDelForMode, ExitMode (001KASIE_SEWU ) [thxxmode.c 3525]
S
S Tue Jan 20 15:36:10 2009
S handle memory type is RSTSPRIMEM
M
M Tue Jan 20 15:37:29 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
M
M Tue Jan 20 15:37:38 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
M
M Tue Jan 20 15:37:44 2009
M ***LOG R47=> ThResFree, delete (001020) [thxxmode.c 1049]
S
S Tue Jan 20 15:39:58 2009
S found spool memory service RSPO-ACTIONS at 0F2A4EE8
X
X Tue Jan 20 15:40:01 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
B
B Tue Jan 20 15:40:21 2009
B table logging switched on for client '300'
X
X Tue Jan 20 15:41:10 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(524288) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfRollOut, PfAllocRoll (statrec) [pfxxstat.c 7187]
X
X Tue Jan 20 15:41:36 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfRollOut, PfAllocRoll (statrec) [pfxxstat.c 7187]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfRollOut, PfAllocRoll (statrec) [pfxxstat.c 7187]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X
X Tue Jan 20 15:41:37 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M
M Tue Jan 20 15:41:38 2009
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfRollOut, PfAllocRoll (statrec) [pfxxstat.c 7187]
X
X Tue Jan 20 15:41:52 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfRollOut, PfAllocRoll (statrec) [pfxxstat.c 7187]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfRollOut, PfAllocRoll (statrec) [pfxxstat.c 7187]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X
X Tue Jan 20 15:42:03 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(524288) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfRollOut, PfAllocRoll (statrec) [pfxxstat.c 7187]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(524288) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(524288) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X
X Tue Jan 20 15:42:04 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(524288) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(524288) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X
X Tue Jan 20 15:43:28 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfRollOut, PfAllocRoll (statrec) [pfxxstat.c 7187]
M
M Tue Jan 20 15:43:57 2009
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_READSEQ
X
X Tue Jan 20 15:44:15 2009
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
X *** ERROR => EmIAllocMmResourceEg: EgAlloc(1048576) failed 5 [emxx.c 2873]
M *** ERROR => PfAllocRoll: EmAlloc failed (7) [pfxxstat.c 6986]
M ***LOG R2B=> PfAllocSpaCtrl, PfAllocRoll (statctrl) [pfxxstat.c 6964]
M
M Tue Jan 20 15:45:48 2009
M ThResetMemStates: reset rolled in roll mem state
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 380]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=5840)
When : 1/20/2009 15:45:48.750
Threads : 2
Comuter Name : APPSP1
User Name : SAPServiceBP3
Number of Processors: 8
Processor Type: x86 Family 6 Model 7 Stepping 6
Windows Version: 5.0 Current Build: 2195
State Dump for Thread Id 6b4
eax=01d4f5a4 ebx=00000000 ecx=01010101 edx=00000000 esi=77f94086 edi=00000748
eip=77f94091 esp=01d4f574 ebp=01d4f598 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : rstsc_close
00a0f84e e857450000 call rstssgs__set_global_state (00a13daa)
00a0f853 8b5d0c mov ebx,[ebp+0xc] ss:1ca3e592=00000000
00a0f856 3bdf cmp ebx,edi
00a0f858 59 pop ecx
00a0f859 59 pop ecx
00a0f85a 0f847b040000 je rstsc_close+0x4dc (00a0fcdb)
00a0f860 8b33 mov esi,[ebx] ds:00000000=????????
00a0f862 3bf7 cmp esi,edi
00a0f864 8975ec mov [ebp+0xec],esi ss:1ca3e592=00000000
00a0f867 0f846e040000 je rstsc_close+0x4dc (00a0fcdb)
FAULT-> 00a0f86d 8b06 mov eax,[esi] ds:77f94086=0000eab8
00a0f86f 3d204f444f cmp eax,0x4f444f20
00a0f874 7443 jz rstsc_close+0xba (00a0f8b9)
00a0f876 50 push eax
00a0f877 8d45cc lea eax,[ebp+0xcc] ss:1ca3e592=00000000
00a0f87a 6894993001 push 0x1309994
00a0f87f 50 push eax
00a0f880 ff1564a5c200 ds:00c2a564=780238ae
call dword ptr [_imp__sprintf (00c2a564)]
00a0f886 57 push edi
00a0f887 57 push edi
00a0f888 57 push edi
00a0f889 6a08 push 0x8
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
01d4fce8 00939a22 00000000 679d8484 ffffffff 00000002 disp+work!rstsc_close
01d4fd18 0093a286 02bcb070 ffffffff 00e66d98 00000000 disp+work!SpOOHBeforeRollback
01d4fd38 00456e6b 00000002 01d4fd68 0148255c 780238ae disp+work!SpInitOOHHooks
01d4fd54 0044208d 00000002 00000000 00000000 00000002 disp+work!ThCallHooks
01d4fd68 0090d5d4 00000000 00000001 780238ae 00000000 disp+work!ThCheckComOrRb
01d4fd8c 0090cd1d 00000000 004422e1 ffffffff 00000005 disp+work!db_init
01d4fd94 004422e1 ffffffff 00000005 00000000 00c8d6bc disp+work!db_rollback
01d4fdac 004781c5 00000000 00000000 00000001 00000002 disp+work!ThIRollBack
01d4fdd8 0047a5f4 01d4fe03 00000003 00000000 00000001 disp+work!ThResFree
01d4fe0c 0047a1bf 00000000 00000001 03f9e420 0043904e disp+work!ThIUsrDel
01d4fe1c 0043904e 00000000 00000001 000003e8 00000bb8 disp+work!ThUsrDel
01d4fe94 004348f7 03f50001 03f9e420 01d4fedc 7800bd6a disp+work!ThClearNextFields
000003e8 00000000 00000000 00000000 00000000 00000000 disp+work!TskhLoop
State Dump for Thread Id 10d8
eax=033efcbc ebx=00000103 ecx=00000012 edx=00000000 esi=00000000 edi=00000000
eip=77f87131 esp=033efc70 ebp=033efcb0 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function : ZwFsControlFile
77f87126 b848000000 mov eax,0x48
77f8712b 8d542404 lea edx,[esp+0x4] ss:1e0dec6b=????????
77f8712f cd2e int 2e
77f87131 c22800 ret 0x28
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
033efcb0 00ba98a4 00000a4c 00000000 00000a64 01f15740 ntdll!ZwFsControlFile
033eff7c 780085bc 00000000 00000a64 01d4fd68 01f15740 disp+work!SigILastSig
033effb4 7c4e987c 01f15740 00000a64 01d4fd68 01f15740 MSVCRT!endthreadex
033effec 00000000 00000000 00000000 00000000 00000000 KERNEL32!SetThreadExecutionState
M -
M call clean-up function ...
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = 104
M mode = 0
M len = -1
M rq_id = 4237
M rq_source = 1
M last_tid = 104
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M Modeinfo for User T104/M0
M
M tm state = 4
M uid = 112
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >BRIS02619656<
M terminal = >bri-cfrftkf1a75 <
M client = >300<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 3
M mode state = 0x92
M th_errno = 11
M async_receives = 0
M cpic_receive = 0
M em handle = 62
M roll state = 4
M abap state = 3
M em state = 3
M eg state = 1
M spa state = 1
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = >ZSLIP <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 679D5FC0
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server appsp1_BP3_03 on host appsp1 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Tue Jan 20 15:45:48 2009
M
M Tue Jan 20 15:45:49 2009
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 7831
M * COUNTER 1
M *
M *****************************************************************************
M
A
A ** RABAX: level LEV_RX_STANDARD failed.
A
A ** RABAX: level LEV_RX_MEMO_CHECK failed.
A
A ** RABAX: level LEV_SN_STATUS failed.
A
A ** RABAX: level LEV_SN_PROGRAMS failed.
A
A ** RABAX: level LEV_SN_EVENTS failed.
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE YES YES NO 20090120 153512
B Disconnected from connection 0
B statistics db_con_commit (com_total=1966, com_forced=211, com_tx=211)
B statistics db_con_rollback (roll_total=21, roll_forced=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5840) [dpnttool.c 300]
M return from clean-up function ...
trc file: "dev_w0", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue Jan 20 15:51:52 2009
B create_con (con_name=R/3)
B Loading DB library 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll' ...
B Library 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll' is '46D.00'
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 534
M intno 0
M pid 6728
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 6728) [dpxxdisp.c 911]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
B find_con found the following connection for reuse:
B 0: name = R/3, concnt= 000000 state = DISCONNECTED, perm = YES, reco = NO
C Extended Fetch will be used
C
C Tue Jan 20 15:51:53 2009
C Using shared procedure name cache (DBSP_BP3_MEM,2640040 bytes,20000 procs) initialized by another process
C Using shared TEMP procedure cache (DBSP_BP3_TSP,10560024 bytes,15000 procs) initialized by another process
C Thank You for using the SLOLEDB-interface
C Connected to db server : [DBSP], dbname: BP3, dbuser: dbo
C Using dynamic link library 'Y:\usr\sap\BP3\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 528
C patchcomment MSSQL: Long DBCON Dbnames, batch insert correction (393213)
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20090120 155152
M db_connect o.k.
I MtxInit: 0 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 54
M rdisp/reinitialize_code_page -> 0
M PfReadDBVersion: use compatibility mode for stat-files
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 06F81160
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 6 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S
S Tue Jan 20 15:51:54 2009
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0F2A0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0F2A0CA0
S using messages for server info
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 2F930040, size 310213K)
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC Destination> destination appsp1_BP3_03 host appsp1 system BP3 systnr 3 (appsp1_BP3_03)
A RFC Options> H=appsp1,S=03
A RFC Method> initialize RemObjDriver for ABAP Objects
M SsfSapSecin: putenv(SECUDIR=Y:\usr\sap\BP3\DVEBMGS03\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is Y:\usr\sap\BP3\SYS\exe\run\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M ===...sucessfully completed.
M =================================================
M ThCheckPrevUser: clean previous user T104/U112/M0
M
M Modeinfo for User T104/M0
M
M tm state = 4
M uid = 112
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >BRIS02619656<
M terminal = >bri-cfrftkf1a75 <
M client = >300<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 3
M mode state = 0x92
M th_errno = 11
M async_receives = 0
M cpic_receive = 0
M em handle = 62
M roll state = 4
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 1
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = >ZSLIP <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 679D5FC0
M
M ThResetMemStates: reset rolled in roll mem state
C The IRow interface is supported by this OLEDB provider
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 380]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=6728)
When : 1/20/2009 15:51:55.0
Threads : 2
Comuter Name : APPSP1
User Name : SAPServiceBP3
Number of Processors: 8
Processor Type: x86 Family 6 Model 7 Stepping 6
Windows Version: 5.0 Current Build: 2195
State Dump for Thread Id 1a10
eax=01d4f57c ebx=00000000 ecx=01010101 edx=00000000 esi=77f94086 edi=000007e4
eip=77f94091 esp=01d4f54c ebp=01d4f570 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : rstsc_close
00a0f84e e857450000 call rstssgs__set_global_state (00a13daa)
00a0f853 8b5d0c mov ebx,[ebp+0xc] ss:11a9e56a=20202020
00a0f856 3bdf cmp ebx,edi
00a0f858 59 pop ecx
00a0f859 59 pop ecx
00a0f85a 0f847b040000 je rstsc_close+0x4dc (00a0fcdb)
00a0f860 8b33 mov esi,[ebx] ds:00000000=????????
00a0f862 3bf7 cmp esi,edi
00a0f864 8975ec mov [ebp+0xec],esi ss:11a9e56a=20202020
00a0f867 0f846e040000 je rstsc_close+0x4dc (00a0fcdb)
FAULT-> 00a0f86d 8b06 mov eax,[esi] ds:77f94086=0000eab8
00a0f86f 3d204f444f cmp eax,0x4f444f20
00a0f874 7443 jz rstsc_close+0xba (00a0f8b9)
00a0f876 50 push eax
00a0f877 8d45cc lea eax,[ebp+0xcc] ss:11a9e56a=20202020
00a0f87a 6894993001 push 0x1309994
00a0f87f 50 push eax
00a0f880 ff1564a5c200 ds:00c2a564=780238ae
call dword ptr [_imp__sprintf (00c2a564)]
00a0f886 57 push edi
00a0f887 57 push edi
00a0f888 57 push edi
00a0f889 6a08 push 0x8
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
01d4fcc0 00939a22 00000000 679d8484 ffffffff 00000002 disp+work!rstsc_close
01d4fcf0 0093a286 02bcb070 ffffffff 00e66d98 00000000 disp+work!SpOOHBeforeRollback
01d4fd10 00456e6b 00000002 01d4fd40 0148255c 780238ae disp+work!SpInitOOHHooks
01d4fd2c 0044208d 00000002 00000000 00000000 00000002 disp+work!ThCallHooks
01d4fd40 0090d5d4 00000000 00000001 780238ae 00000000 disp+work!ThCheckComOrRb
01d4fd64 0090cd1d 00000000 004422e1 ffffffff 00000005 disp+work!db_init
01d4fd6c 004422e1 ffffffff 00000005 00000000 00c8d6bc disp+work!db_rollback
01d4fd84 004781c5 00000000 00000000 00000001 00000002 disp+work!ThIRollBack
01d4fdb0 0047a5f4 00000003 00000003 00000017 00000001 disp+work!ThResFree
01d4fde4 0047a1bf 00000017 00000001 00000000 00479b55 disp+work!ThIUsrDel
01d4fdf4 00479b55 00000017 00000001 00000000 00050a40 disp+work!ThUsrDel
00000068 00000000 00000000 00000000 00000000 00000000 disp+work!ThIAMDel2
State Dump for Thread Id 1574
eax=00000000 ebx=00000103 ecx=7ffdbc00 edx=00000000 esi=00000000 edi=00000000
eip=77f87131 esp=033efc70 ebp=033efcb0 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function : ZwFsControlFile
77f87126 b848000000 mov eax,0x48
77f8712b 8d542404 lea edx,[esp+0x4] ss:1313ec6b=20202020
77f8712f cd2e intyou kernel is very very old:
M relno 4640
M patchlevel 0
M patchno 534
update it with the latest 4.6D_EX2 kernel. -
CRM_UI Reporting - HTTPS Terminating at Web Dispatcher or SSL all the way
Hi,
We need to set up access to crm_ui reports (leads and marketing mainly) in CRM 7.0 for vendors coming from the internet. The CRM server is in the internal network. In order for this to work I plan to setup the web-dispatcher in the application dmz. The initial login is going to be via the web dmz layer (using sun's iplanet server), which then routes the crm URL to the web dispatcher in the App dmz and then from the web dispatcher to CRM server.
One requirement from our security team is to set up the flow as HTTPS.
On going through SAP help I get the impression that it can be set up two ways, one, configuring web dispatcher to pass the SSL connection to backend, & two - configuring the web dispatcher to terminate SSL.
Seems the former is quite straight forward (from SAP online help we have to set the icm/server_port_<xx>> = PROT=ROUTER) but does it also require that we setup the crm_ui_frame service as SSL and activate the HTTPS service in ICM?
Or is it better to go via the second option (HTTPS termination) without changing the backend setup? SAP Online help lists steps to do the HTTPS termination but I have not come across any detailed documentation for the first method.
Any thoughts, suggestions will be helpful for either scenario.
Thanks,
Rommel BhanThanks Martin the document helped.
Now the web dispatcher seems to talk to the HTTPS port on the backend.
However there is one issue I see in the dev_webdisp and was wondering if you have an insight.
Based on webdispatcher parameters, its taling to ms_https_port 8533 of backend
[Thr 773] Mon Feb 15 15:03:35 2010
[Thr 773] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
[Thr 773] SecudeSSL_SessionStart: SSL_connect() failed --
[Thr 773] secude_error 9 (0x00000009) = "the verification of the server's certificate chain failed"
[Thr 773] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 773] ERROR in ssl3_get_server_certificate: (9/0x0009) the verification of the server's certificate chain failed
[Thr 773] ERROR in af_verify_Certificates: (27/0x001b) Chain of certificates is incomplete : "CN=sapcms02.reinternal.com, OU=I0020210975, OU=SAP Web AS, O=SAP Trust Community, C=DE"
[Thr 773] ERROR in get_path: (27/0x001b) Found root certificate of <CN=sapcms02.reinternal.com, OU=I0020210975, OU=SAP Web AS, O=SAP Trust Community, C=DE> which does not fit the given PKRoot
[Thr 773] ERROR in verify_with_PKs: (27/0x001b) Found root certificate of <CN=sapcms02.reinternal.com, OU=I0020210975, OU=SAP Web AS, O=SAP Trust Community, C=DE> which does not fit the given PKRoot
[Thr 773] << -
End of Secude-SSL Errorstack -
[Thr 773] SSL_get_state() returned 0x00002131 "SSLv3 read server certificate B"
[Thr 773] SSL NI-sock: local=10.104.146.81:62579 peer=10.104.146.81:8533
[Thr 773] <<- ERROR: SapSSLSessionStart(sssl_hdl=110acb850)==SSSLERR_SSL_CONNECT
[Thr 773] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt.c 1911]
[Thr 773] *** ERROR => IcmConnClientRqCreate() failed (rc=-14) [icrxx_mt.c 5976]
[Thr 773] *** ERROR => Could not connect to SAP Message Server at sapcms02. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 3289]
[Thr 773] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 3290]
[Thr 773] *** ERROR => see also SAP note 552286 [icrxx_mt.c 3291]
My backend is setup with SSL and web dispatcher is set to the following. Also since the backend and sapweb dispatcher are on the same host, using the same sidadm, the SSL stuff is on one location. I generated the SAPSSLS.pse in the backend using STRUST
Accessibility of Message Servers
rdisp/mshost = sapcms02
ms/http_port = 8100
ms/https_port = 8533
wdisp/server_info_protocol = https
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=ROUTER,PORT=60000
icm/server_port_1 = PROT=HTTPS,PORT=0
icm/server_port_2 = PROT=HTTP,PORT=8080 <-- web dispatcher admin port
#SSL parameters similar to one in backend
ssf/ssfapi_lib = /usr/sap/CMS/SYS/exe/run/libsapcrypto.o
sec/libsapsecu = /usr/sap/CMS/SYS/exe/run/libsapcrypto.o
ssf/name = SAPSECULIB
ssl/ssl_lib = /usr/sap/CMS/SYS/exe/run/libsapcrypto.o
ssl/server_pse=/usr/sap/CMS/DVEBMGS00/sec/SAPSSLS.pse
ssl/client_pse=/usr/sap/CMS/DVEBMGS00/sec/SAPSSLC.pse -
Not Running on the Event Dispatch thread, but UI still freezes
The environment: I am currently working on an application that requires some heavy lifting in response to user input on a UI. To do this I am using a version of SwingWorker that was backported from java 1.6 to java 1.5 in conjunction with a slew of custom threads.
The problem: I am currently running into an issue where I am not operating on the Event Dispatch thread (checked by doing a javax.swing.SwingUtilities.isEventDispatchThread()) but the UI is still freezing during this section. The operation involves a loop with about 2000 iterations and contains several file accesses. I have thought about how to make a new thread to perform the same operation, but I do not see how it would be any different since as it is I am not on the EDT. The call is being made from doInBackground and specifically the piece that is slowing things down is the File Accesses (2 for every iteration of the loop). At this point I am not sure how to go about resolving the issue. Any one have any suggestions?I am not operating on the Event Dispatch threadThat is the problem. Use multiple threads for GUI, which should delegates to the EDT, and your app logic.
-
Problem with combination of LabVIEW classes (dynamic dispatch), statechart module and FPGA module
SITUATION:
- I am developing a plug-in-based software with plug-ins based on LabVIEW classes which are instanced at run-time. The actual plug-in classes are derived from generic plug-in classes that define the interfaces to the instancing VI and may provide basic functionality. This means that many of the classes' methods are dynamic dispatch and methods of child classes may even call the parent method.
- Top-level plug-ins (those directly accessed by the main VI) each have a run method that drives a plug-in-specific statechart.
- The statechart of the data acquisition plug-in class (DAQ class) calls a method of the DAQ class that reads in data from a NI FPGA card and passes it on to another component via a queue.
PROBLEM:
- At higher sampling rates, an FPGA-to-host FIFO overflow occurs after some time. When I "burden" the system just by moving a Firefox browser window over the screen, the overflow is immediately triggered. I did not have this kind of problem in an older software, where I was also reading from an FPGA FIFO, but did not make use of LabVIEW classes or statecharts.
TRIED SOLUTIONS (WITHOUT SUCCESS):
- I put the statechart into a timed loop (instead of a simple while loop) which I assigned specifically to an own core (I have a quad-core processor), while I left all the other loops of my application (there are many of them) in simple while loops. The FIFO overflow still does occur, however.
QUESTION:
- Does anybody have a hint how I could tackle this problem? What could be the cause: the dynamic dispatch methods, the DAQ statechart or just the fact that I have a large number of loops? However, I can hardly change the fact that I have dynamic dispatch methods because that's the very core of my architecture...
Any hints are greatly appreciated!
Message Edited by dlanger on 06-25-2009 04:18 AM
Message Edited by dlanger on 06-25-2009 04:19 AM
Solved!
Go to Solution.I now changed the execution priority of all the VIs involved in reading from the FPGA FIFO to "time critical priority (highest)". This seems to improve the situation very much: so far I did not get a FIFO overflow anymore, even when I move around windows on the screen. I hope it stays like this...
-
Disp+work.EXE Dispatcher Stopped - error
Hi Experts,
When I starting the SAP Solution Manager / WINDOWS 2003 Server x64, In SAPMMC Console, disp+work.exe process shows an error, it not display a error, but simply donu00B4t start (donu00B4t show the green semaphore but instead it show the gray semaphore state). So the systems canu00B4t start with this error!
What I have to make for correct this issue!?
I check some posts sent by some users in SDN with seem error and almost all of them tell check the dev_disp ; dev_w0 and sapstartsrv (which I check in directory G:\usr\sap\<SID>\...\work). Sorry about the extension of this message, but is a truly copy from this three logs, which I think are the most important in this kind of error...
Kindly help me how to solve this issue, so nest, I show you the content of that three log files.
dev_disp
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid SSM
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3852
Thu Dec 04 15:04:00 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3852) [dpxxdisp.c 1254]
shared lib "dw_xml.dll" version 159 successfully loaded
shared lib "dw_xtc.dll" version 159 successfully loaded
shared lib "dw_stl.dll" version 159 successfully loaded
shared lib "dw_gui.dll" version 159 successfully loaded
shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Dec 04 15:04:04 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ptresapsm_SSM_00 <
DpShMCreate: sizeof(wp_adm) 27472 (1616)
DpShMCreate: sizeof(tm_adm) 5912624 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EF60050, size: 6611392)
DpShMCreate: allocated sys_adm at 000000000EF60050
DpShMCreate: allocated wp_adm at 000000000EF62150
DpShMCreate: allocated tm_adm_list at 000000000EF68CA0
DpShMCreate: allocated tm_adm at 000000000EF68D00
DpShMCreate: allocated wp_ca_adm at 000000000F50C530
DpShMCreate: allocated appc_ca_adm at 000000000F5122F0
DpShMCreate: allocated comm_adm at 000000000F514230
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F59AEC0
DpShMCreate: allocated gw_adm at 000000000F59AF40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F59AF70
DpShMCreate: allocated wall_adm at 000000000F59AF80
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Dec 04 15:04:05 2008
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 5119MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 5120MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1279 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2520
argv[0] = G:\usr\sap\SSM\DVEBMGS00\exe\jcontrol.EXE
argv[1] = G:\usr\sap\SSM\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=SSM
argv[7] = -DSAPMYNAME=ptresapsm_SSM_00
argv[8] = -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( ptresapsm) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >ptresapsm_SSM_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Dec 04 15:04:09 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 256
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1408) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2520)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Dec 04 15:04:45 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:04:55 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Dec 04 15:04:55 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2460 Ended no 1 0 0
1 DIA 3968 Ended no 1 0 0
2 DIA 1628 Ended no 1 0 0
3 DIA 2840 Ended no 1 0 0
4 DIA 3100 Ended no 1 0 0
5 DIA 3392 Ended no 1 0 0
6 DIA 3692 Ended no 1 0 0
7 DIA 1612 Ended no 1 0 0
8 DIA 2344 Ended no 1 0 0
9 DIA 2256 Ended no 1 0 0
10 UPD 3948 Ended no 1 0 0
11 ENQ 1552 Ended no 1 0 0
12 BTC 2984 Ended no 1 0 0
13 BTC 1696 Ended no 1 0 0
14 BTC 2716 Ended no 1 0 0
15 SPO 2920 Ended no 1 0 0
16 UP2 1692 Ended no 1 0 0
Dispatcher Queue Statistics Thu Dec 04 15:04:55 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu Dec 04 15:04:55 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Dec 04 15:04:55 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:00 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ptresapsm_SSM_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3992) (SOFT_KILL)
Stop icman
killing process (604) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3992 HANDLE:372)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:01 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3992 HANDLE:372)
wait for end of icman
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:02 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:604 HANDLE:384)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=405
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 04 15:05:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:604 HANDLE:384)
[DpProcDied] Process died (PID:2520 HANDLE:356)
DpStartStopMsg: send stop message (myname is >ptresapsm_SSM_00 <)
NiIMyHostName: hostname = 'ptresapsm'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Dec 04 15:05:13 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12283]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 280 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 280 (pos=3)
SiSelNRemove: removed sock 280
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 280
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3852) [dpxxdisp.c 10484]
Good Bye .....
dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 04 15:04:05 2008
B create_con (con_name=R/3)
B Loading DB library 'G:\usr\sap\SSM\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'G:\usr\sap\SSM\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'G:\usr\sap\SSM\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.158)
B New connection 0 created
M sysno 00
M sid SSM
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 159
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2460
M
M kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2460) [dpxxdisp.c 1316]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 27472 (1616)
M DpShMCreate: sizeof(tm_adm) 5912624 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010F60050, size: 6611392)
M DpShMCreate: allocated sys_adm at 0000000010F60050
M DpShMCreate: allocated wp_adm at 0000000010F62150
M DpShMCreate: allocated tm_adm_list at 0000000010F68CA0
M DpShMCreate: allocated tm_adm at 0000000010F68D00
M DpShMCreate: allocated wp_ca_adm at 000000001150C530
M DpShMCreate: allocated appc_ca_adm at 00000000115122F0
M DpShMCreate: allocated comm_adm at 0000000011514230
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001159AEC0
M DpShMCreate: allocated gw_adm at 000000001159AF40
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001159AF70
M DpShMCreate: allocated wall_adm at 000000001159AF80
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 04 15:04:06 2008
M ThInit: running on host ptresapsm
M
M Thu Dec 04 15:04:07 2008
M calling db_connect ...
C Thread ID:2168
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'G:\usr\sap\SSM\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 158
C patchcomment Corrections of odbc-based dbsl: dsql: optype, DSN (1135165)
C np:(local) connection used on PTRESAPSM
C CopyLocalParameters: dbuser is 'ssm'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ERROR: schema user ssm has administrator fixed server role (user_name() is 'dbo').
C This is not allowed. Please check the Server Roles of user ssm.
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10504]
M
M Info for wp 0
M
M pid = 2460
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ptresapsm_SSM_00 on host ptresapsm (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 04 15:04:07 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10724
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2460) [dpnttool.c 333]
sapstartsrv
trc file: "sapstartsrv.log", trc level: 0, release: "700"
pid 3236
Thu Dec 04 15:00:12 2008
SAP HA Trace: Build in SAP Microsoft Cluster library '700, patch 159, changelist 981833' initialized
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
PTRESAPSM\ssmadm is starting SAP System at 2008/12/04 15:01:40
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
PTRESAPSM\ssmadm is stopping SAP System at 2008/12/04 15:03:35
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
PTRESAPSM\ssmadm is starting SAP System at 2008/12/04 15:03:55
Finish
Help me please...
If you want more log files.... or another information tell me OK??!! TKS
Best Regards,
Thanks in advance,
Joao DimasHello Markus Doehr,
Thanks for help me... Next Iu00B4m going put the log files that you recommend me to check and also the dev_jcontrol which I think is important to check... I donu00B4t really know...
dev_jcontrol
dev_bootstrap
dev_server0
std_server0.out
Iu00B4m newest in SAP... so I still have problems to verify/check the log files... I donu00B4t have the sensibility for discover the issues in log... in error... etc
Can you tell me if there is any problem / error in that log files...?! Thanks in advance!!
_________ || _____________ || ______________ || _____________
trc file: "G:\usr\sap\SSM\DVEBMGS00\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 3492
system name : SSM
system nr. : 00
started at : Fri Dec 05 10:56:56 2008
arguments :
arg[00] : G:\usr\sap\SSM\DVEBMGS00\exe\jcontrol.EXE
arg[01] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=64990
arg[04] : -DSAPSYSTEM=00
arg[05] : -DSAPSYSTEMNAME=SSM
arg[06] : -DSAPMYNAME=ptresapsm_SSM_00
arg[07] : -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 3508] Fri Dec 05 10:56:56 2008
[Thr 3508] *** WARNING => INFO: Unknown property [instance.box.number=SSMDVEBMGS00ptresapsm] [jstartxx.c 841]
[Thr 3508] *** WARNING => INFO: Unknown property [instance.en.host=ptresapsm] [jstartxx.c 841]
[Thr 3508] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 3508] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties;G:\usr\sap\SSM\DVEBMGS00\SDM\program\config\sdm_jstartup.properties]
-> ms host : ptresapsm
-> ms port : 3901
-> OS libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> files [01] : G:\usr\sap\SSM\DVEBMGS00\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : ptresapsm
-> ms port : 3901
-> os libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] sdm : G:\usr\sap\SSM\DVEBMGS00\SDM\program\config\sdm_jstartup.properties
[Thr 3508] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 1620] JControlDPMessageProxy: Thread 1620 started as handler thread for R/3 dispatcher messages.
[Thr 3508] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdkx64
[Thr 3508] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : C:\j2sdkx64
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_17-b06
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> root path : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0015832
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = G:\usr\sap\SSM\DVEBMGS00\exe\jlaunch.exe
-> arg[00] = G:\usr\sap\SSM\DVEBMGS00\exe\jlaunch.exe
-> arg[01] = pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[02] = -DSAPINFO=SSM_00_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_3492
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=G:\usr\sap\SSM\DVEBMGS00\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=G:\usr\sap\SSM\DVEBMGS00\work\std_bootstrap.out
-> arg[09] = -locOutFile=G:\usr\sap\SSM\DVEBMGS00\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=1302
-> arg[14] = -DSAPSYSTEM=00
-> arg[15] = -DSAPSYSTEMNAME=SSM
-> arg[16] = -DSAPMYNAME=ptresapsm_SSM_00
-> arg[17] = -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdkx64\jre\bin\server;C:\j2sdkx64\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdkx64\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SSM\SYS\exe\uc\NTAMD64
-> exe path = PATH=C:\j2sdkx64\bin;G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdkx64\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SSM\SYS\exe\uc\NTAMD64
[Thr 3508] Fri Dec 05 10:56:59 2008
[Thr 3508] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx.c 1642]
[Thr 3508] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 3508] JControlCloseProgram: started (exitcode = 66)
[Thr 3508] JControlCloseProgram: good bye... (exitcode = 66)
trc file: "G:\usr\sap\SSM\DVEBMGS00\work\dev_bootstrap", trc level: 1, release: "700"
node name : bootstrap
pid : 4028
system name : SSM
system nr. : 00
started at : Fri Dec 05 10:56:56 2008
arguments :
arg[00] : G:\usr\sap\SSM\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[02] : -DSAPINFO=SSM_00_bootstrap
arg[03] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=1302
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=SSM
arg[08] : -DSAPMYNAME=ptresapsm_SSM_00
arg[09] : -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 2592] Fri Dec 05 10:56:56 2008
[Thr 2592] *** WARNING => INFO: Unknown property [instance.box.number=SSMDVEBMGS00ptresapsm] [jstartxx.c 841]
[Thr 2592] *** WARNING => INFO: Unknown property [instance.en.host=ptresapsm] [jstartxx.c 841]
[Thr 2592] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 2592] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : ptresapsm
-> ms port : 3901
-> OS libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : ptresapsm
-> ms port : 3901
-> os libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 2592] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 2592] JLaunchRequestQueueInit: create pipe listener thread
[Thr 3484] JLaunchRequestFunc: Thread 3484 started as listener thread for np messages.
[Thr 4020] WaitSyncSemThread: Thread 4020 started as semaphore monitor thread.
[Thr 2592] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 2592] CPIC (version=700.2006.09.13)
[Thr 2592] [Node: bootstrap] java home is set by profile parameter
Java Home: C:\j2sdkx64
[Thr 2592] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : C:\j2sdkx64
-> java parameters : -Djco.jarm=1
-> java vm version : 1.4.2_17-b06
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> root path : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0015832
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 2580] JLaunchIStartFunc: Thread 2580 started as Java VM thread.
[Thr 2580] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -Dsys.global.dir=G:\usr\sap\SSM\SYS\global
-> arg[ 5]: -Dapplication.home=G:\usr\sap\SSM\DVEBMGS00\exe
-> arg[ 6]: -Djava.class.path=G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar;.\bootstrap\launcher.jar
-> arg[ 7]: -Djava.library.path=C:\j2sdkx64\jre\bin\server;C:\j2sdkx64\jre\bin;C:\j2sdkx64\bin;G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdkx64\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SSM\SYS\exe\uc\NTAMD64
-> arg[ 8]: -Dmemory.manager=256M
-> arg[ 9]: -Xmx256M
-> arg[ 10]: -DLoadBalanceRestricted=no
-> arg[ 11]: -Djstartup.mode=BOOTSTRAP
-> arg[ 12]: -Djstartup.ownProcessId=4028
-> arg[ 13]: -Djstartup.ownHardwareId=O0010092564
-> arg[ 14]: -Djstartup.whoami=bootstrap
-> arg[ 15]: -Djstartup.debuggable=yes
-> arg[ 16]: -Xss2m
-> arg[ 17]: -DSAPINFO=SSM_00_bootstrap
-> arg[ 18]: -DSAPSTART=1
-> arg[ 19]: -DCONNECT_PORT=1302
-> arg[ 20]: -DSAPSYSTEM=00
-> arg[ 21]: -DSAPSYSTEMNAME=SSM
-> arg[ 22]: -DSAPMYNAME=ptresapsm_SSM_00
-> arg[ 23]: -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[ 24]: -DFRFC_FALLBACK=ON
-> arg[ 25]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 26]: -DSAPSTARTUP=1
-> arg[ 27]: -DSAPSYSTEM=00
-> arg[ 28]: -DSAPSYSTEMNAME=SSM
-> arg[ 29]: -DSAPMYNAME=ptresapsm_SSM_00
-> arg[ 30]: -DSAPDBHOST=PTRESAPSM
-> arg[ 31]: -Dj2ee.dbhost=PTRESAPSM
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 2580] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [bootstrap]
-> arg[ 0]: com.sap.engine.bootstrap.Bootstrap
-> arg[ 1]: ./bootstrap
-> arg[ 2]: ID0015832
[Thr 2580] Fri Dec 05 10:56:57 2008
[Thr 2580] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 3872] Fri Dec 05 10:56:59 2008
[Thr 3872] JLaunchIExitJava: exit hook is called (rc = 66)
[Thr 3872] **********************************************************************
*** ERROR => The Java VM terminated with a non-zero exit code.
*** Please see SAP Note 943602 , section 'J2EE Engine exit codes'
*** for additional information and trouble shooting.
[Thr 3872] JLaunchCloseProgram: good bye (exitcode = 66)
trc file: "G:\usr\sap\SSM\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
node name : ID1583250
pid : 4560
system name : SSM
system nr. : 00
started at : Thu Dec 04 12:15:53 2008
arguments :
arg[00] : G:\usr\sap\SSM\DVEBMGS00\exe\jlaunch.exe
arg[01] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[02] : -DSAPINFO=SSM_00_server
arg[03] : pf=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=4371
arg[06] : -DSAPSYSTEM=00
arg[07] : -DSAPSYSTEMNAME=SSM
arg[08] : -DSAPMYNAME=ptresapsm_SSM_00
arg[09] : -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4724] Thu Dec 04 12:15:53 2008
[Thr 4724] *** WARNING => INFO: Unknown property [instance.box.number=SSMDVEBMGS00ptresapsm] [jstartxx.c 841]
[Thr 4724] *** WARNING => INFO: Unknown property [instance.en.host=ptresapsm] [jstartxx.c 841]
[Thr 4724] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]
[Thr 4724] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host : ptresapsm
-> ms port : 3901
-> OS libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host : ptresapsm
-> ms port : 3901
-> os libs : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID1583200 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID1583250 : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 4724] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 4724] JLaunchRequestQueueInit: create pipe listener thread
[Thr 5880] JLaunchRequestFunc: Thread 5880 started as listener thread for np messages.
[Thr 5300] WaitSyncSemThread: Thread 5300 started as semaphore monitor thread.
[Thr 4724] Thu Dec 04 12:15:54 2008
[Thr 4724] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 4724] CPIC (version=700.2006.09.13)
[Thr 4724] [Node: server0] java home is set by profile parameter
Java Home: C:\j2sdkx64
[Thr 4724] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID1583250]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : C:\j2sdkx64
-> java parameters : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:+DisableExplicitGC -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> java vm version : 1.4.2_17-b06
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 1024M
-> init heap size : 1024M
-> root path : G:\usr\sap\SSM\DVEBMGS00\j2ee\cluster\server0
-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path : G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50021
-> shutdown timeout : 120000
[Thr 4724] JLaunchISetDebugMode: set debug mode [no]
[Thr 4428] JLaunchIStartFunc: Thread 4428 started as Java VM thread.
[Thr 4428] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -XX:MaxPermSize=256M
-> arg[ 5]: -XX:PermSize=256M
-> arg[ 6]: -XX:NewSize=171M
-> arg[ 7]: -XX:MaxNewSize=171M
-> arg[ 8]: -XX:+DisableExplicitGC
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -XX:+PrintGCDetails
-> arg[ 11]: -XX:+PrintGCTimeStamps
-> arg[ 12]: -Djava.awt.headless=true
-> arg[ 13]: -Dsun.io.useCanonCaches=false
-> arg[ 14]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 15]: -XX:SurvivorRatio=2
-> arg[ 16]: -XX:TargetSurvivorRatio=90
-> arg[ 17]: -Djava.security.policy=./java.policy
-> arg[ 18]: -Djava.security.egd=file:/dev/urandom
-> arg[ 19]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 20]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 21]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 22]: -Dsys.global.dir=G:\usr\sap\SSM\SYS\global
-> arg[ 23]: -Dapplication.home=G:\usr\sap\SSM\DVEBMGS00\exe
-> arg[ 24]: -Djava.class.path=G:\usr\sap\SSM\DVEBMGS00\exe\jstartup.jar;G:\usr\sap\SSM\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 25]: -Djava.library.path=C:\j2sdkx64\jre\bin\server;C:\j2sdkx64\jre\bin;C:\j2sdkx64\bin;G:\usr\sap\SSM\DVEBMGS00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdkx64\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;G:\usr\sap\SSM\SYS\exe\uc\NTAMD64
-> arg[ 26]: -Dmemory.manager=1024M
-> arg[ 27]: -Xmx1024M
-> arg[ 28]: -Xms1024M
-> arg[ 29]: -DLoadBalanceRestricted=no
-> arg[ 30]: -Djstartup.mode=JCONTROL
-> arg[ 31]: -Djstartup.ownProcessId=4560
-> arg[ 32]: -Djstartup.ownHardwareId=O0010092564
-> arg[ 33]: -Djstartup.whoami=server
-> arg[ 34]: -Djstartup.debuggable=no
-> arg[ 35]: -Xss2m
-> arg[ 36]: -DSAPINFO=SSM_00_server
-> arg[ 37]: -DSAPSTART=1
-> arg[ 38]: -DCONNECT_PORT=4371
-> arg[ 39]: -DSAPSYSTEM=00
-> arg[ 40]: -DSAPSYSTEMNAME=SSM
-> arg[ 41]: -DSAPMYNAME=ptresapsm_SSM_00
-> arg[ 42]: -DSAPPROFILE=G:\usr\sap\SSM\SYS\profile\SSM_DVEBMGS00_ptresapsm
-> arg[ 43]: -DFRFC_FALLBACK=ON
-> arg[ 44]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 45]: -DSAPSTARTUP=1
-> arg[ 46]: -DSAPSYSTEM=00
-> arg[ 47]: -DSAPSYSTEMNAME=SSM
-> arg[ 48]: -DSAPMYNAME=ptresapsm_SSM_00
-> arg[ 49]: -DSAPDBHOST=PTRESAPSM
-> arg[ 50]: -Dj2ee.dbhost=PTRESAPSM
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 4428] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 588] Thu Dec 04 12:15:57 2008
[Thr 588] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 588] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 588] Thu Dec 04 12:15:58 2008
[Thr 588] JLaunchISetClusterId: set cluster id 1583250
[Thr 588] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 588] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Thu Dec 04 12:16:13 2008
19.077: [GC 19.077: [DefNew: 87552K->5496K(131328K), 0.0501466 secs] 87552K->5496K(1004800K), 0.0502893 secs]
Thu Dec 04 12:16:18 2008
24.676: [GC 24.677: [DefNew: 93048K->11119K(131328K), 0.1023379 secs] 93048K->11119K(1004800K), 0.1025900 secs]
Thu Dec 04 12:16:22 2008
28.000: [GC 28.001: [DefNew: 98671K->11384K(131328K), 0.0546187 secs] 98671K->11384K(1004800K), 0.0547362 secs]
Thu Dec 04 12:16:24 2008
30.095: [GC 30.096: [DefNew: 98936K->13814K(131328K), 0.0476156 secs] 98936K->13814K(1004800K), 0.0477286 secs]
Thu Dec 04 12:16:25 2008
31.857: [GC 31.857: [DefNew: 101366K->15103K(131328K), 0.0584224 secs] 101366K->15103K(1004800K), 0.0585738 secs]
Thu Dec 04 12:16:28 2008
34.874: [GC 34.874: [DefNew: 102655K->17038K(131328K), 0.0604113 secs] 102655K->17038K(1004800K), 0.0605012 secs]
Thu Dec 04 12:16:32 2008
38.572: [GC 38.572: [DefNew: 104590K->19152K(131328K), 0.0565713 secs] 104590K->19152K(1004800K), 0.0566538 secs]
[Thr 1688] Thu Dec 04 12:16:36 2008
[Thr 1688] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
Thu Dec 04 12:16:37 2008
43.012: [GC 43.012: [DefNew: 106704K->25227K(131328K), 0.0823079 secs] 106704K->25227K(1004800K), 0.0823936 secs]
[Thr 1688] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 1688] Thu Dec 04 12:16:38 2008
[Thr 1688] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
Thu Dec 04 12:16:43 2008
49.556: [GC 49.556: [DefNew: 112779K->29697K(131328K), 0.0999738 secs] 112779K->29697K(1004800K), 0.1000646 secs]
Thu Dec 04 12:16:46 2008
52.042: [GC 52.042: [DefNew: 117249K->35264K(131328K), 0.1106408 secs] 117249K->35264K(1004800K), 0.1107553 secs]
[Thr 5380] Thu Dec 04 12:16:47 2008
[Thr 5380] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
Thu Dec 04 12:16:48 2008
54.071: [GC 54.072: [DefNew: 122816K->40377K(131328K), 0.1233043 secs] 122816K->40377K(1004800K), 0.1234162 secs]
Thu Dec 04 12:16:49 2008
55.087: [GC 55.087: [DefNew: 127929K->37640K(131328K), 0.1115527 secs] 127929K->41526K(1004800K), 0.1116567 secs]
[Thr 588] Thu Dec 04 12:16:50 2008
[Thr 588] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
Thu Dec 04 12:16:51 2008
57.389: [GC 57.389: [DefNew: 125192K->42625K(131328K), 0.1177039 secs] 129078K->46511K(1004800K), 0.1177899 secs]
Thu Dec 04 12:16:54 2008
60.213: [GC 60.213: [DefNew: 130177K->36624K(131328K), 0.1019909 secs] 134063K->44865K(1004800K), 0.1020999 secs]
Thu Dec 04 12:16:56 2008
62.474: [GC 62.474: [DefNew: 124176K->38648K(131328K), 0.1008482 secs] 132417K->46888K(1004800K), 0.1009399 secs]
Thu Dec 04 12:17:00 2008
66.746: [GC 66.746: [DefNew: 126200K->42040K(131328K), 0.1027034 secs] 134440K->50280K(1004800K), 0.1027940 secs]
Thu Dec 04 12:17:13 2008
79.914: [GC 79.914: [DefNew
Thu Dec 04 12:17:14 2008
: 129592K->41760K(131328K), 0.1082566 secs] 137832K->53026K(1004800K), 0.1083554 secs]
Thu Dec 04 12:17:17 2008
83.501: [GC 83.501: [DefNew: 129312K->41403K(131328K), 0.1066359 secs] 140578K->55610K(1004800K), 0.1067443 secs]
Thu Dec 04 12:17:18 2008
84.609: [GC 84.609: [DefNew: 128952K->43776K(131328K), 0.1170661 secs] 143159K->61207K(1004800K), 0.1171621 secs]
Thu Dec 04 12:17:19 2008
85.804: [GC 85.804: [DefNew: 131328K->36934K(131328K), 0.1093640 secs] 148759K->59382K(1004800K), 0.1094988 secs]
Thu Dec 04 12:17:27 2008
93.252: [GC 93.253: [DefNew: 124461K->42704K(131328K), 0.1173445 secs] 146909K->65152K(1004800K), 0.1174320 secs]
Thu Dec 04 12:17:30 2008
96.217: [GC 96.217: [DefNew: 130256K->40910K(131328K), 0.1076070 secs] 152704K->66929K(1004800K), 0.1077113 secs]
Thu Dec 04 12:17:31 2008
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
Thu Dec 04 12:17:33 2008
99.226: [GC 99.226: [DefNew: 128462K->35273K(131328K), 0.1083766 secs] 154481K->68349K(1004800K), 0.1084756 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readElement
Thu Dec 04 12:17:36 2008
102.480: [GC 102.480: [DefNew: 122825K->35659K(131328K), 0.0899413 secs] 155901K->68735K(1004800K), 0.0900270 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType::_loadInto
Thu Dec 04 12:17:37 2008
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readSequence
Thu Dec 04 12:17:38 2008
104.392: [GC 104.392: [DefNew: 123211K->37812K(131328K), 0.0939406 secs] 156287K->70888K(1004800K), 0.0940273 secs]
Thu Dec 04 12:17:40 2008
106.588: [GC 106.588: [DefNew: 125364K->40347K(131328K), 0.0999732 secs] 158440K->73423K(1004800K), 0.1000776 secs]
Thu Dec 04 12:17:43 2008
109.430: [GC 109.430: [DefNew: 127899K->37058K(131328K), 0.1094132 secs] 160975K->75618K(1004800K), 0.1094978 secs]
Thu Dec 04 12:17:46 2008
111.972: [GC 111.973: [DefNew: 124610K->39109K(131328K), 0.1022987 secs] 163170K->77670K(1004800K), 0.1024141 secs]
Thu Dec 04 12:17:48 2008
114.920: [GC 114.920: [DefNew
Thu Dec 04 12:17:49 2008
: 126661K->41995K(131328K), 0.1145837 secs] 165222K->80555K(1004800K), 0.1147194 secs]
Thu Dec 04 12:17:51 2008
117.861: [GC 117.861: [DefNew
Thu Dec 04 12:17:52 2008
: 129547K->39474K(131328K), 0.1112544 secs] 168107K->82009K(1004800K), 0.1113396 secs]
Thu Dec 04 12:17:54 2008
120.826: [GC 120.826: [DefNew: 127026K->40925K(131328K), 0.1045812 secs] 169561K->84055K(1004800K), 0.1046915 secs]
Thu Dec 04 12:17:56 2008
122.740: [GC 122.740: [DefNew: 128477K->42193K(131328K), 0.1803097 secs] 171607K->88132K(1004800K), 0.1804721 secs]
Thu Dec 04 12:18:00 2008
125.939: [GC 125.939: [DefNew: 129745K->38462K(131328K), 0.1148672 secs] 175684K->90542K(1004800K), 0.1149527 secs]
Thu Dec 04 12:18:03 2008
128.973: [GC 128.973: [DefNew: 126014K->40200K(131328K), 0.1029183 secs] 178094K->92280K(1004800K), 0.1030087 secs]
Thu Dec 04 12:18:05 2008
131.325: [GC 131.325: [DefNew: 127752K->39192K(131328K), 0.1282047 secs] 179832K->93785K(1004800K), 0.1283172 secs]
Thu Dec 04 12:18:08 2008
133.987: [GC 133.987: [DefNew: 126744K->41235K(131328K), 0.1047548 secs] 181337K->95828K(1004800K), 0.1048436 secs]
Thu Dec 04 12:18:10 2008
136.610: [GC 136.610: [DefNew: 128787K->40864K(131328K), 0.1071581 secs] 183380K->97485K(1004800K), 0.1072430 secs]
Thu Dec 04 12:18:13 2008
139.412: [GC 139.412: [DefNew: 128416K->36293K(131328K), 0.1119034 secs] 185037K->99433K(1004800K), 0.1120108 secs]
Thu Dec 04 12:18:15 2008
141.693: [GC 141.693: [DefNew: 123845K->37761K(131328K), 0.0960635 secs] 186985K->100902K(1004800K), 0.0961513 secs]
[Thr 3164] Thu Dec 04 12:18:18 2008
[Thr 3164] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
Thu Dec 04 12:18:57 2008
182.994: [GC 182.994: [DefNew: 125313K->39240K(131328K), 0.0968107 secs] 188454K->102380K(1004800K), 0.0969356 secs]
Thu Dec 04 12:21:49 2008
355.304: [GC 355.304: [DefNew: 126792K->42607K(131328K), 0.1088315 secs] 189932K->105748K(1004800K), 0.1089311 secs]
Thu Dec 04 12:21:50 2008
356.838: [GC 356.838: [DefNew
Thu Dec 04 12:21:51 2008
: 130159K->43776K(131328K), 0.1229288 secs] 193300K->110857K(1004800K), 0.1230164 secs]
Thu Dec 04 12:21:58 2008
364.250: [GC 364.251: [DefNew: 131328K->43775K(131328K), 0.1563593 secs] 198409K->117956K(1004800K), 0.1564564 secs]
Thu Dec 04 13:11:57 2008
3363.074: [GC 3363.074: [DefNew: 131327K->40304K(131328K), 0.1502807 secs] 205508K->120156K(1004800K), 0.1504182 secs]
Thu Dec 04 14:01:58 2008
6363.012: [GC 6363.012: [DefNew: 127856K->40163K(131328K), 0.0958166 secs] 207708K->121393K(1004800K), 0.0959492 secs]
[Thr 5880] Thu Dec 04 14:30:08 2008
[Thr 5880] JLaunchRequestFunc: receive command:17, argument:0 from pid:3568
[Thr 5880] JLaunchIShutdownInvoke: set shutdown interval (stop:1228401008/end:1228401128/TO:120)
[Thr 5880] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 5880] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 4916] JLaunchISetState: change state from [Running (3)] to [Waiting for stop (4)]
[Thr 4916] JLaunchISetState: change state from [Waiting for stop (4)] to [Stopping (5)]
[Thr 6052] Thu Dec 04 14:30:12 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 7 / sock 5616
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:12 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 1
[Thr 6052] *
[Thr 6052] *****************************************************************************
8057.269: [GC 8057.270: [DefNew
Thu Dec 04 14:30:13 2008
: 127715K->39141K(131328K), 0.0977667 secs] 208945K->122135K(1004800K), 0.0978771 secs]
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 5 / sock 6548
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:13 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 2
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:14 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 5 / sock 6548
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:14 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 3
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:15 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 5620
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:15 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 4
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:16 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 5620
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:16 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 5
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:19 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 6000
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:19 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 6
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:22 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 2992
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:22 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 7
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:25 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 2992
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:25 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 8
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 6052] Thu Dec 04 14:30:32 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 2988
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:32 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 9
[Thr 6052] *
[Thr 6052] *****************************************************************************
Thu Dec 04 14:30:34 2008
8078.843: [GC 8078.843: [DefNew: 126693K->35646K(131328K), 0.0929205 secs] 209687K->118640K(1004800K), 0.0931376 secs]
[Thr 280] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.sadm.ShmCache
[Thr 6052] Thu Dec 04 14:30:35 2008
[Thr 6052] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 8804
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp 2823]
[Thr 6052] *** ERROR => GwIConnect: GwConnect to localhost / sapgw00 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
[Thr 6052] ***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
[Thr 6052] ***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
[Thr 6052] ***LOG S0S=> GwIConnect, GwConnect (sapgw00) [gwxx.c 301]
[Thr 6052] ***LOG S90=> SAP_CMREGTP3, GwIConnect ( 236) [r3cpic.c 9624]
[Thr 6052]
[Thr 6052] * ERROR partner '127.0.0.1:sapgw00' not reached
[Thr 6052] *
* TIME Thu Dec 04 14:30:35 2008
[Thr 6052] * RELEASE 700
[Thr 6052] * COMPONENT NI (network interface)
[Thr 6052] * VERSION 38
[Thr 6052] * RC -10
[Thr 6052] * MODULE nixxi.cpp
[Thr 6052] * LINE 2823
[Thr 6052] * DETAIL NiPConnect2
[Thr 6052] * SYSTEM CALL connect
[Thr 6052] * ERRNO 10061
[Thr 6052] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 6052] * COUNTER 10
[Thr 6052] *
[Thr 6052] *****************************************************************************
[Thr 4916] Thu Dec 04 14:30:36 2008
[Thr 4916] JLaunchISetState: change state from [Stopping (5)] to [Stopped (6)]
[Thr 1188] Thu Dec 04 14:30:37 2008
[Thr 1188] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 1188] JLaunchCloseProgram: good bye (exitcode = 0)
stdout/stderr redirect
node name : server0
pid : 3568
system name : SSM
system nr. : 00
started at : Thu Dec 04 12:15:53 2008
[Thr 4724] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 109886.44 is starting...
Loading: LogManager ... 1235 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 188 ms.
Loading: ThreadManager ... 47 ms.
Loading: IpVerificationManager ... 15 ms.
Loading: ClassLoaderManager ... 32 ms.
Loading: ClusterManager ... 437 ms.
Loading: LockingManager ... 109 ms.
Loading: ConfigurationManager ... 3750 ms.
Loading: LicensingManager ... 63 ms.
Loading: CacheManager ... 281 ms.
Loading: ServiceManager ...
19.077: [GC 19.077: [DefNew: 87552K->5496K(131328K), 0.0501466 secs] 87552K->5496K(1004800K), 0.0502893 secs]
Loading services.:
Service cross started. (94 ms).
Service file started. (109 ms).
Service memory started. (47 ms).
Service timeout started. (125 ms).
Service runtimeinfo started. (141 ms).
Service trex.service started. (62 ms).
Service p4 started. (516 ms).
Service classpath_resolver started. (47 ms).
Service userstore started. (63 ms).
Service jmx_notification started. (63 ms).
24.676: [GC 24.677: [DefNew: 93048K->11119K(131328K), 0.1023379 secs] 93048K->11119K(1004800K), 0.1025900 secs]
28.000: [GC 28.001: [DefNew: 98671K->11384K(131328K), 0.0546187 secs] 98671K->11384K(1004800K), 0.0547362 secs]
30.095: [GC 30.096: [DefNew: 98936K->13814K(131328K), 0.0476156 secs] 98936K->13814K(1004800K), 0.0477286 secs]
31.857: [GC 31.857: [DefNew: 101366K->15103K(131328K), 0.0584224 secs] 101366K->15103K(1004800K), 0.0585738 secs]
Service log_configurator started. (9922 ms).
Service locking started. (16 ms).
Service naming started. (547 ms).
Service ts started. (110 ms).
Service licensing started. (63 ms).
Service failover started. (156 ms).
Service javamail started. (250 ms).
Service http started. (672 ms).
Service appclient started. (187 ms).
Service jmsconnector started. (266 ms).
Service connector started. (313 ms).
Service iiop started. (375 ms).
Service webservices started. (1063 ms).
34.874: [GC 34.874: [DefNew: 102655K->17038K(131328K), 0.0604113 secs] 102655K->17038K(1004800K), 0.0605012 secs]
38.572: [GC 38.572: [DefNew: 104590K->19152K(131328K), 0.0565713 secs] 104590K->19152K(1004800K), 0.0566538 secs]
Service deploy started. (16954 ms).
Service configuration started. (63 ms).
Service MigrationService started. (47 ms).
Service bi~mmr~deployer started. (15 ms).
Service dbpool started. (1641 ms).
Service UT started. (16 ms).
43.012: [GC 43.012: [DefNew: 106704K->25227K(131328K), 0.0823079 secs] 106704K->25227K(1004800K), 0.0823936 secs]
Service com.sap.security.core.ume.service started. (5985 ms).
Service security started. (1313 ms).
49.556: [GC 49.556: [DefNew: 112779K->29697K(131328K), 0.0999738 secs] 112779K->29697K(1004800K), 0.1000646 secs]
Service classload started. (187 ms).
Service applocking started. (203 ms).
Service shell started. (250 ms).
Service tc~eCATTPing~service started. (62 ms).
Service telnet started. (62 ms).
Service ejb started. (547 ms).
Service dsr started. (281 ms).
Service servlet_jsp started. (969 ms).
Service webdynpro started. (672 ms).
Service tc~di~sdic~srv started. (2359 ms).
Service keystore started. (1094 ms).
Service ssl started. (31 ms).
Service tc~sec~securestorage~service started. (219 ms).
Service tc~sec~certrevoc~service started. (187 ms).
Service caf~um~metadata~imp started. (1344 ms).
Service jmx started. (1031 ms).
Service caf~runtime~connectivity~impl started. (26938 ms).
52.042: [GC 52.042: [DefNew: 117249K->35264K(131328K), 0.1106408 secs] 117249K->35264K(1004800K), 0.1107553 secs]
Service tc~lm~ctc~confs~service_sda started. (891 ms).
Service CUL started. (1125 ms).
Service tc~sec~destinations~service started. (1266 ms).
Service tc~sec~wssec~service started. (1250 ms).
Service caf~um~relgroups~imp started. (1312 ms).
Service sld started. (1625 ms).
Service rfcengine started. (328 ms).
Service com.adobe~DocumentServicesBinaries2 started. (1313 ms).
Service com.adobe~DocumentServicesLicenseSupportService started. (828 ms).
Service com.adobe~DataManagerService started. (1219 ms).
Service com.adobe~DocumentServicesDestProtoService started. (390 ms).
Service com.adobe~XMLFormService started. (953 ms).
Service tc~sec~vsi~service started. (734 ms).
Service basicadmin started. (2157 ms).
Service apptracing started. (735 ms).
Service com.adobe~LicenseService started. (171 ms).
Service pmi started. (109 ms).
54.071: [GC 54.072: [DefNew: 122816K->40377K(131328K), 0.1233043 secs] 122816K->40377K(1004800K), 0.1234162 secs]
Service adminadapter started. (750 ms).
Service com.adobe~PDFManipulation started. (2078 ms).
Service tc~smd~server~service started. (1485 ms).
Service com.adobe~DocumentServicesConfiguration started. (1031 ms).
Service com.adobe~TrustManagerService started. (109 ms).
Service monitor started. (829 ms).
55.087: [GC 55.087: [DefNew: 127929K->37640K(131328K), 0.1115527 secs] 127929K->41526K(1004800K), 0.1116567 secs]
Service jms_provider started. (4219 ms).
Service tc.monitoring.logviewer started. (4000 ms).
Service com.adobe~FontManagerService started. (4593 ms).
ServiceManager started for 47938 ms.
Framework started for 54563 ms.
SAP J2EE Engine Version 7.00 PatchLevel 109886.44 is running!
PatchLevel 109886.44 November 17, 2007 10:27 GMT
>
Login :57.389: [GC 57.389: [DefNew: 125192K->42625K(131328K), 0.1177039 secs] 129078K->46511K(1004800K), 0.1177899 secs]
60.213: [GC 60.213: [DefNew: 130177K->36624K(131328K), 0.1019909 secs] 134063K->44865K(1004800K), 0.1020999 secs]
62.474: [GC 62.474: [DefNew: 124176K->38648K(131328K), 0.1008482 secs] 132417K->46888K(1004800K), 0.1009399 secs]
66.746: [GC 66.746: [DefNew: 126200K->42040K(131328K), 0.1027034 secs] 134440K->50280K(1004800K), 0.1027940 secs]
79.914: [GC 79.914: [DefNew: 129592K->41760K(131328K), 0.1082566 secs] 137832K->53026K(1004800K), 0.1083554 secs]
83.501: [GC 83.501: [DefNew: 129312K->41403K(131328K), 0.1066359 secs] 140578K->55610K(1004800K), 0.1067443 secs]
84.609: [GC 84.609: [DefNew: 128952K->43776K(131328K), 0.1170661 secs] 143159K->61207K(1004800K), 0.1171621 secs]
85.804: [GC 85.804: [DefNew: 131328K->36934K(131328K), 0.1093640 secs] 148759K->59382K(1004800K), 0.1094988 secs]
93.252: [GC 93.253: [DefNew: 124461K->42704K(131328K), 0.1173445 secs] 146909K->65152K(1004800K), 0.1174320 secs]
96.217: [GC 96.217: [DefNew: 130256K->40910K(131328K), 0.1076070 secs] 152704K->66929K(1004800K), 0.1077113 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
99.226: [GC 99.226: [DefNew: 128462K->35273K(131328K), 0.1083766 secs] 154481K->68349K(1004800K), 0.1084756 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readElement
102.480: [GC 102.480: [DefNew: 122825K->35659K(131328K), 0.0899413 secs] 155901K->68735K(1004800K), 0.0900270 secs]
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType::_loadInto
### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readSequence
104.392: [GC 104.392: [DefNew: 123211K->37812K(131328K), 0.0939406 secs] 156287K->70888K(1004800K), 0.0940273 secs]
106.588: [GC 106.588: [DefNew: 125364K->40347K(131328K), 0.0999732 secs] 158440K->73423K(1004800K), 0.1000776 secs]
109.430: [GC 109.430: [DefNew: 127899K->37058K(131328K), 0.1094132 secs] 160975K->75618K(1004800K), 0.1094978 secs]
111.972: [GC 111.973: [DefNew: 124610K->39109K(131328K), 0.1022987 secs] 163170K->77670K(1004800K), 0.1024141 secs]
114.920: [GC 114.920: [DefNew: 126661K-& -
Hi
I have ECC6 IDES version was working fine last 3 months . i have just added two profiles in RZ10
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 2
it was not reflecting on so i thought i will restart server so i did it. since then my server is always in yellow state. my Abap , J2ee table are blank and i monitored couple of time when i start server first all table start in RUN state then Ended and disappears then dispatcher goes stopped.
Things i did to resolve this but didn't work
1) tryed to revert back old profiles in OS level
2) Increases j2ee time out ( 600 to 6000)
3) started data base at command level using connect/@ PIS as sydba and the mounted database and then started management consol but still same problem continues.
Can some one help me quickly ...
trc file: "dev_w0", trc level: 1, release: "700"
M
M Tue Sep 25 11:14:07 2012
M calling db_connect ...
C Prepending D:\usr\sap\PIS\DVEBMGS40\exe to Path.
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PIS on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000130F28C0 000000000A7B33C0 000000000A7B8BE8
C Attaching to DB Server PIS (con_hdl=0,svchp=000000000A7B8AA8,svrhp=0000000013111918)
C Starting user session (con_hdl=0,svchp=000000000A7B8AA8,srvhp=0000000013111918,usrhp=000000000A7B3BD8)
C Now '/@PIS' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=000000000A7B8AA8,usrhp=000000000A7B3BD8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@PIS on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000130F28C0 000000000A7B33C0 000000000A7B8BE8
C Starting user session (con_hdl=0,svchp=000000000A7B8AA8,srvhp=0000000013111918,usrhp=000000000A7B3BD8)
C Now 'SAPSR3/<pwd>@PIS' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance PIS is running on DEVSYS with ORACLE version 10.2.0.1.0 since 20120924
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20120925 111407 DEVSYS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000014E30050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFE6D00050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000015270050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001D280050, size: 2678942)
M SHM_PAGING_ADM (addr: 000000001D510050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000001D5A0050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000FFD0050
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Tue Sep 25 11:14:08 2012
B dbtbxbuf: Buffer TABL (addr: 0000000022E40160, size: 30000000, end: 0000000024ADC4E0)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14206976
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Buffer TABLP (addr: 0000000024AE0160, size: 10240000, end: 00000000254A4160)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5032704
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 0 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 400 = 400
B 2: 13 * 40 = 520
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13502 * 256 = 3456512
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer EIBUF (addr: 00000000254B0170, size: 4194304, end: 00000000258B0170)
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 400 = 400
B 2: 13 * 40 = 520
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13502 * 256 = 3456512
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer ESM (addr: 00000000258C0170, size: 4194304, end: 0000000025CC0170)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 400 = 400
B 2: 13 * 40 = 520
B 3: 3001 * 48 = 144048
B 4: 1500 * 256 = 384000
B 5: 3001 * 8 = 24008
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 4916 * 512 = 2516992
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer CUA (addr: 0000000025CD0170, size: 3072000, end: 0000000025FBE170)
B ***LOG BB0=> buffer CUA started with length 3000k bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 400 = 400
B 2: 13 * 40 = 520
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13501 * 256 = 3456256
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer OTR (addr: 0000000025FC0170, size: 4194304, end: 00000000263C0170)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ]
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 15, max_in_blocking_factor = 5,
B min_blocking_factor = 10, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1160, total = 3064
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 000000000AAF0050
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 000000000AAF07C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 000000000AAF0800
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 000000000AAF080C
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=D:\usr\sap\PIS\DVEBMGS40\sec, AS=devsys, instanceid=40)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec (client: , key: 102635, len: 14851)
N SsfPseLoadFile: Couldn't open file D:\usr\sap\PIS\DVEBMGS40\sec: Permission denied
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPELEARN200.pse (client: , key: 172011, len: 1348)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSNCS.pse (client: , key: 025318, len: 804)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSSLA.pse (client: , key: 025401, len: 2838)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSSLC.pse (client: , key: 025427, len: 3080)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSSLS.pse (client: , key: 025344, len: 1465)
N SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSYS.pse (client: , key: SYSPSE, len: 14851)
N SsfPseLoad: ended (6 of 7 sucessfully loaded, 8 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
N SncInit(): Initializing Secure Network Communication (SNC)
N PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/64/64)
N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit(): found snc/data_protection/min=2, using 2 (Integrity Level)
N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): found snc/gssapi_lib=path_to_SAPCRYPTOLIB
M *** ERROR => DlLoadLib: LoadLibrary(path_to_SAPCRYPTOLIB) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
N *** ERROR => SncPDLInit(): DlLoadLib("path_to_SAPCRYPTOLIB")=DLENOACCESS
N [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) path_to_SAPCRYPTOLIB not loaded
N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
N sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 230]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 232]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 10019]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c 327]
Regards
BabuProblem solve by taking out SNC profile
-
Event Dispatch Thread Hangs, what is wrong?
The Event Dispatch Thread Hangs when showing a modal dialog while running a
SwingWorker Thread.
I have included my code at the bottom of the page. There are three classes. I have posted a bug report to red hat. But I want to make sure my code is correct.
My test case just puts the SwingWorker to sleep
but the problem occurs if I do something real, like connect to a database, etc.
Also I have tried little different variations of the logic calling
setVisible(true)/(false) in different places and the same problem occurs.
It seems to work with Sun JDK, note I am using IcedTea with Fedora Core 8.
Version-Release number of selected component (if applicable):
[szakrews@tuxtel ~]$ java -version
java version "1.7.0"
IcedTea Runtime Environment (build 1.7.0-b21)
IcedTea Client VM (build 1.7.0-b21, mixed mode)How reproducible:
Every couple times.
javac TestClass2
java TestClass2eventually it will hang. If it doesn't try again.
You don't have to wait for the program to finish either.
The program runs the Dialog 10 times but it never works or fails in the middle, it will either work or fail from the first dialog displayed.
I have included a thread dump. That is about the most informative information I can get. Neither tracing nor writing a custom ThreadQueue or Drawing Manager to trace events produces any helpful information.
Actual results:
The JProccessBar won't move, and the SwingWorker finishes but the done() method is never run. The PROGRAM is not hung however because if I close the dialog then it will continue.
Expected results:
The JProccessBar should always move and the SwingWorker should always run the done() method.
Additional info:
java thread dump after freeze, taken with kill -s SIGQUIT <pid>
2008-06-25 12:25:50
Full thread dump IcedTea Client VM (1.7.0-b21 mixed mode):
"DestroyJavaVM" prio=10 tid=0x938afc00 nid=0x1419 waiting on condition
[0x00000000..0x0018a074]
java.lang.Thread.State: RUNNABLE
"AWT-EventQueue-0" prio=10 tid=0x938ae400 nid=0x1429 in Object.wait()
[0x07f96000..0x07f96f04]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x96748f80> (a java.awt.EventQueue)
at java.lang.Object.wait(Object.java:503)
at java.awt.EventQueue.getNextEvent(EventQueue.java:485)
- locked <0x96748f80> (a java.awt.EventQueue)
at
java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:248)
at
java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:201)
at
java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:195)
at java.awt.Dialog$1.run(Dialog.java:1073)
at java.awt.Dialog$3.run(Dialog.java:1127)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1125)
at java.awt.Component.show(Component.java:1456)
at java.awt.Component.setVisible(Component.java:1408)
at java.awt.Window.setVisible(Window.java:871)
at java.awt.Dialog.setVisible(Dialog.java:1012)
at net.xtel.production.WaitDialog.showWaitDialog(WaitDialog.java:72)
at net.xtel.production.WaitDialog.showWaitDialog(WaitDialog.java:102)
at TestClass2.showWait(TestClass2.java:79)
at TestClass2.createAndShowGUI(TestClass2.java:126)
at TestClass2.access$0(TestClass2.java:114)
at TestClass2$3.run(TestClass2.java:138)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:227)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:603)
at
java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:276)
at
java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:201)
at
java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:191)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:186)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:178)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:139)
"AWT-Shutdown" prio=10 tid=0x938ad000 nid=0x1428 in Object.wait()
[0x03ea7000..0x03ea7f84]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x96749268> (a java.lang.Object)
at java.lang.Object.wait(Object.java:503)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:281)
- locked <0x96749268> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:675)
"AWT-XAWT" daemon prio=10 tid=0x938a8400 nid=0x1423 runnable
[0x02ccc000..0x02ccd104]
java.lang.Thread.State: RUNNABLE
at sun.awt.X11.XToolkit.waitForEvents(Native Method)
at sun.awt.X11.XToolkit.run(XToolkit.java:550)
at sun.awt.X11.XToolkit.run(XToolkit.java:525)
at java.lang.Thread.run(Thread.java:675)
"Java2D Disposer" daemon prio=10 tid=0x93854000 nid=0x1421 in Object.wait()
[0x07aea000..0x07aead84]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x966e7010> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
- locked <0x966e7010> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:150)
at sun.java2d.Disposer.run(Disposer.java:143)
at java.lang.Thread.run(Thread.java:675)
"Low Memory Detector" daemon prio=10 tid=0x93c15000 nid=0x141f runnable
[0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"CompilerThread0" daemon prio=10 tid=0x93c13400 nid=0x141e waiting on condition
[0x00000000..0x03a8a954]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x93c11c00 nid=0x141d waiting on
condition [0x00000000..0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=10 tid=0x095e7000 nid=0x141c in Object.wait()
[0x005d2000..0x005d3004]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x966e71d8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
- locked <0x966e71d8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:150)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:177)
"Reference Handler" daemon prio=10 tid=0x095e2400 nid=0x141b in Object.wait()
[0x00581000..0x00582084]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x966e7260> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:503)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:134)
- locked <0x966e7260> (a java.lang.ref.Reference$Lock)
"VM Thread" prio=10 tid=0x095dec00 nid=0x141a runnable
"VM Periodic Task Thread" prio=10 tid=0x93c17400 nid=0x1420 waiting on condition
JNI global references: 836
Heap
def new generation total 960K, used 152K [0x93f40000, 0x94040000, 0x966a0000)
eden space 896K, 9% used [0x93f40000, 0x93f56148, 0x94020000)
from space 64K, 100% used [0x94020000, 0x94030000, 0x94030000)
to space 64K, 0% used [0x94030000, 0x94030000, 0x94040000)
tenured generation total 4096K, used 1088K [0x966a0000, 0x96aa0000, 0xb3f40000)
the space 4096K, 26% used [0x966a0000, 0x967b01b0, 0x967b0200, 0x96aa0000)
compacting perm gen total 12288K, used 9169K [0xb3f40000, 0xb4b40000, 0xb7f40000)
the space 12288K, 74% used [0xb3f40000, 0xb4834740, 0xb4834800, 0xb4b40000)
No shared spaces configured.CLASS1:
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.sql.SQLException;
import java.util.concurrent.ExecutionException;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.RepaintManager;
import javax.swing.SwingUtilities;
import javax.swing.UIManager;
import javax.swing.UnsupportedLookAndFeelException;
public class TestClass2 extends JFrame implements ActionListener {
/** Action Command for <code>searchbtn</code> */
public static final String SEARCH_BTN_ACTION = "search_btn_action";
* Constructor.
public TestClass2() {
setSize(650, 350);
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
setLocation(screenSize.width / 2 - getSize().width / 2,
screenSize.height / 2 - getSize().height / 2);
setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
addWindowListener(new WindowAdapter() {
@Override
public void windowClosing(WindowEvent e) {
exit();
JPanel panel = new JPanel();
add(panel);
setVisible(true);
@Override
public void actionPerformed(ActionEvent e) {
if (e.getActionCommand().equals(SEARCH_BTN_ACTION)) {
JOptionPane.showMessageDialog(this, "Button Pressed");
public void showWait() {
try {
WaitDialog.showWaitDialog(this, "Testing...", new SwingWorkerInterface(){
@Override
public Object workToDo() throws Throwable {
Thread.currentThread().sleep(3000);
return null;
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (ExecutionException e) {
// TODO Auto-generated catch block
e.printStackTrace();
* Exits the program.
public void exit(){
System.exit(0);
* Create the GUI and show it. For thread safety, this method should be
* invoked from the event-dispatching thread.
* @throws UnsupportedLookAndFeelException
* @throws IllegalAccessException
* @throws InstantiationException
* @throws ClassNotFoundException
* @throws NullInstanceVariableException
* @throws SQLException
private static void createAndShowGUI() {
// set look and feel
try{
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
// Create instance of the ProductCatalog
TestClass2 root = new TestClass2();
for(int i = 0; i < 10; i++){
root.showWait();
}catch(Exception e){
e.printStackTrace();
* @param args
* this program does not use arguments
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}CLASS 2:
import java.awt.Component;
import java.awt.Frame;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.util.concurrent.ExecutionException;
import javax.swing.JDialog;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.JProgressBar;
import javax.swing.SwingWorker;
public class WaitDialog extends JDialog {
private boolean disposed = false;
private boolean displayed = false;
private WorkerThread worker = null;
WaitDialog(Frame parent, String text, SwingWorkerInterface in){
super(parent, true);
worker = new WorkerThread(in);
setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
addWindowListener(new WindowAdapter() {
@Override
public void windowOpened(WindowEvent e) {
worker.execute();
@Override
public void windowClosing(WindowEvent e) {
disposeWaitDialog();
this.setResizable(false);
JLabel message = new JLabel();
message.setText(text);
JProgressBar pb = new JProgressBar();
pb.setIndeterminate(true);
// set size and location
setSize(200, 100);
setLocationRelativeTo(parent);
JPanel panel = new JPanel();
panel.add(message);
panel.add(pb);
add(panel);
public void showWaitDialog(){
if(displayed == true){
return;
if(disposed == true){
disposed = false;
return;
disposed = false;
displayed = true;
setVisible(true);
public void disposeWaitDialog(){
if(disposed == true){
return;
if(displayed == true){
displayed = false;
setVisible(false);
return;
disposed = true;
displayed = false;
public static Object showWaitDialog(Component parent, String text, SwingWorkerInterface in) throws InterruptedException, ExecutionException {
WaitDialog waitDialog = null;
if (parent == null) {
waitDialog = new WaitDialog(JOptionPane.getRootFrame(), text, in);
} else {
waitDialog = new WaitDialog(JOptionPane.getFrameForComponent(parent), text, in);
while(!waitDialog.worker.isDone()){
System.out.println("about to show");
waitDialog.showWaitDialog();
System.out.println("done showing");
waitDialog.dispose();
return waitDialog.worker.get();
class WorkerThread extends SwingWorker<Throwable, Void> {
private SwingWorkerInterface in = null;
WorkerThread(SwingWorkerInterface in){
this.in = in;
public Throwable doInBackground(){
try {
System.out.println("about to do work");
in.workToDo();
System.out.println("done work no exception");
} catch (Throwable e) {
System.out.println("done work with exception");
return e;
return null;
public void done(){
System.out.println("about to dispose");
disposeWaitDialog();
System.out.println("disposed");
}CLASS 3:
public interface SwingWorkerInterface {
public Object workToDo() throws Throwable;
}There's nothing directly wrong with it, but it will
prevent other threads acquiring the class lock - but
that may be what you want.True. Although the typical case for code that looks like this would be to use wait--usually the various threads in question require the same lock, so you have to use wait in order for the waiting thread to give it up and allow the other thread to do its work. Hard to say for sure though what he's doing.
Also, if loading is all that the other thread does, and you're waiting for that thread to die, use join. But then, if that's the case, and you're only waiting for a single other thread, then you might as well just put it all in one thread, as already indicated. -
Long time to start on Java process dispatcher
Hi ,
I am trying to Install Solution Manager. When I attempt to start my sap system, the Java process dispatcher of instance/stage SM1 (solution manager) takes too much time and finally doesn't start showing this intallation error.
ERROR 2008-09-24 11:01:11.314
CJS-30151 Java process dispatcher of instance SM1/DVEBMGS00 [ABAP: ACTIVE, Java: (dispatcher: UNKNOWN, server0: RUNNING)] did not start after 2:00 minutes. Giving up.
ERROR 2008-09-24 11:01:11.502
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
Can anyone please let me know what is missing in this procedure? Any idea?
tkanks in advance.Hi Matias,
What are the parameters you set for your dispatcher?
Regards
Val
Maybe you are looking for
-
Automatically eliminating a record at the begining of a new month
Hello; I have a little app I am building that makes a list of records organized by the month the record falls in. this is how it looks: JUNE Record title goes here as a link record date the location of the event <!--- all the records for JUNE fall in
-
My iPhone 4 wont 'restore from itunes backup' after updating
I just backed up then updated my iPhone 4. When it was finished it said a problem occurred and I had to restore it. When it finished restoring and I went to sync it and restore from the itunes back up, to get alll my old stuff back, but my phone is s
-
Connecting laptops to wireless APs using RADIUS 802.1x and certificates set-up questions
I am working at a small school with 25 laptops for a mobile cart. We upgraded to new dual radio APs and I want to set up the laptops to connect to the APs and validate user credentials at logon. The person before me made a generic username "Student"
-
How do I scan the content of a LONG field?
I want to perform a search for a given character string in the content of a field of DATATYPE LONG. Must I use the package DBMS_SQL and break up this field into little pieces of character string and scan each of them, or is there an other way of perf
-
Explanation on epmsys_registry tool 11.1.2.1
Hello, after installing and configuring a second frameworkserver (and changing the path to the RM1 folder to a networkshare) I was missing all relevant framework menu's (like explorer and administer) in workspace. I succesfully followed the instructi