Display 0 value for not applicable data found in Company Code Hierarchy

Dear Expert,
How to display 0 value inside company code hierarchy which has no data applicable data found in BW Report? I have created queries with Profit Center(PC) Hierarchy and inside this hierarchy there are several PC. Based on data in BW Cube some of the PC has no applicable data found. But my report should display all the PC inside this hierarchy with 0 value for no applicable data found. What should i do to default 0 value for no applicable data found for that PC so that my report will be display all PC in that hierarchy?
Best regards and thank you,
Lin

Hi Lin,
Right now what value you are seeing when executing the query?
Thanks & Regards,
Vipin

Similar Messages

Bex report issue - no applicable data found when we drill down on free char

Hi All,
We are facing some strange issue with one of the report.
when user run the report for a week (02/02/2009 - 02/08/2009) and then drill down on particular char its working fine (first time).after that when he is trying to change and execute the report for other week on the same instence ( 02/09/2008 - 02/15/2009) by clicking on refresh and passing new values to the variable its showing up correctly at the time of drill down on free char its showing as *no applicable data found.*
when he logoff the system completey and run the report for the week( 02/09/2008 - 02/15/2009) values it is showing up with values even tough he drill down on free char.
issue basically when he was trying to drill on free char by chaging different date values in the same instance by clicking on refreh and by entering diffrent values its showing up as not applicable data found.
but when he enters the values for different weeks each time by closing the system and relogin report is working fine and showing up data eventough he drill down on free char.
Please help me out!

Dear
Please check if any condition or exception you have created for that query.
Or still problem exists check SP level.
Regds,
Sachin J

Sales Order form error "Not able to retrieve Display values for Service"

Hi,
Few of our orders flash the below error message when the order is queried
"Not able to retrieve Display values for Service"
Below are the points I observed
1.The orders I am referring to are imported order via EDI interface.
2.The service reference type code has value of ORDER, however no other service related fields (like service reference line id) have any values.
3. The item is not a service item (service tab in Item setup is disabled)
4. Same item when imported with value of "Customer Ordered" in "service reference type code" field, does not throw an error.
5. If I update "service reference type code" with value null or change it to CUSTOMER_PRODUCT, the error disappears.
Can someone explain the significance of this column value and what could have been causing this error message?
May be there are some dependent fields/setups which must have a value when service reference type code =ORDER.
Thanks in advance,
JC
Edited by: user10174990 on Oct 25, 2012 10:58 AM

Hi,
Maintain the dafault values using Tcode OISF with respective to Planning Plant you have to maintain the following values like Order Type, Main Work Center, Maint. Plant,Group,Group Counter,Business Area & Task List type.
or
Apply these OSS note 150732 / 195993.
regards,
Venkatesan Anandan

Show "No Applicable Data Found" for Report 0SD_C01_Q22

Hi Gurus,
I just activated BI Content Report, 0SD_C01_Q22 and it's relevant InfoSource, DataSource and so on. The data from R3 were loaded into the infoCube successfully.
However, it shows "No Applicable Data Found" when I executed the query.
I have tried to create a new query based on the same InfoCube but has NO limitation parameter. However the result was the same.
Can anyone consult out?
Cheers

Hi my friends,
I have tested it with a really simple report that has no selection condition. But the result is the same.
Also, I have checked the data in infoprovider with LISTCUBE but the data are definitely available.
By the way, I test it with an account hazing profiles as SAP_ALL and S_A.SYSTEM. The super user account should have enough authorization.
So my friends, anymore ideas? Pls help out....
Cheers.

No applicable data found.. Erro in standard cubes.

Hi,
I am getting an error during the utilization of standard cubes in BI 7.01.
After the data load is complete, when i tried to execute the standard cube "Warehouse Workload History - Deliveres" , or
any other standard cubes, NO DATA CAN BE FOUND.
When using Bex Query Designer on Web, the message is : NO DATA CAN BE DISPLAYED. This could be due the current selection of variable or filter values.
When using Analizer in excel, the message is : NO APPLICABLE DATA FOUND
But if we create the same query from beginning, not using the standard cube, with the same fields and indexes and records,
the values are displayed.
We also try to save as the same standard report with another name and doesn`t work.
My system is SAP EHP1 for SAP NETWEAVER 7.0 in SO Linux and Oracle Database.
SAP_ABA , SAP_BASIS, PI_BASIS, SAP_BW is 701 level 07.
BI_CONT is 705 level 01.
please any advices

Check whether the standard report is created on the Info-provider on which the data is loaded .You can see the same in the query properties next to the check query button in query designer as you are able to see data , by creating another query on the inforprovider .

No applicable data found - Error in BEx

Experts,
I have data (material, qty and amt related with future commitments) in cube. I see that data activated in cube and available for reporting. But when I execute report (no filters) I can see that some material is no displayed and if I run report selecting that material it says no applicable data found. This is so wierd problem. Anyone come across this type of situation? Any suggestions or comments please? Thanks.
Regards,
Nimesh

Hi,
you are facing this issue only for few materials.....then it's not a data issue.
If you are looking the values of the basic key figure or some RKF's or CKF's.
It could be possible that the RKF's are defined in such a way that it would be giving only specific materials only.
you said you have activated the master data..... have you run an attribute change run after that??
Do you have any conditions at the report level??? just check that...
Thanks

Report Report Interface: No applicable data found

Hi.
I m using the Report Report Interface and getting:
No applicable data found
while calling in GoTo the second Report.
While removeing the filters threre is data .
What conditions needs to be met that there is data displayed?
Thank You
Martin

Hi,
Please execute the second report separtely with the same filter with which you are getting 'No applicable data found'.
Please check whether executing second report gives you any data with same filter or not.
If it doesn't give , then it means there is no data available to be displayed for that particular filter combination in cube.
In that case you will have to filter the data which is available in cube or need to load the data as required.
Regards,
Amit

How to replace "No Applicable data found." message with other message ?

Hi all BW Gurus
I have a very specific requirement wherein the user wants to see different message instead of "No Applicable data found." in Web result of query.
I think this should be possible with Table Interface Class but i am not sure how to go about this.
If anybody can help me in this regard with sample ABAP code to be written in Table interface class it would be highly appreciated as the requirement is very urgent.
Thanks in Advance
Regards
Swapnil.

Hi Swapnil,
If you are using Web Application Designer means... Through Java Scripting you can solve ur problem.... if it BEX means through Macros you can solve ur problem...
let me know, if you are using Wad means.. i will give the java script.... for displaying different message....
thanks
@jay

BEx Analyzer (SAP BW 3.x) - No Applicable Data Found

Hi,
currently, i now access my BI Server remotelly and my local pc is install with Netweaver 2007s, and i try to do a tutorial on SAP BW. like create infosource, infocube and etc but when i finish creating the infocube and try to make a new query on BEx Analyzer (SAP BW 3.x), and seem like it cannot display anything the errors is as follow "No Applicable Data Found" so now i suspect is either drivers problem or access right problem.. beside that i do make an Installation Check On BEx Analyzer on Business Explorer after that i display this few red alerts.
Filename Version on PC
BW Components
sapbex.xla Not found
sapbex0.xla Not found
sapbexc.xla
OLE for OLAP
mdrmdlg.dll Not found
mdrmsap.dll Not found
mdxpars.dll Not found
saprfc.ini Not found
scerrlkp.dll Not found
SAP GUI core components
sapfctrl.dll Not found
sapfcust.exe Not found
sapfdraw.dll Not found
sapfewrm.dll Not found
sapfhook.dll Not found
wonder could anyone advise me on will this few components result i unable to display the data? if really i need those component how could i download it or should i reinstall it...
anyway for access right part, currently i not the super user account will it affect the query??

Hi Ram,
My dimension table i check already in the Data Warehousing WorkBench the data is sufficient.
even i also check on My Fact table, it has also data loaded in.
but then problem is i unable to display data out.
as according to the book, i follow it should be display out the whole information.
Regards
Jia Jun

Hiding table items in web report when "no applicable data found"

Hi,
i want to hide a complete web item from a web report using web table interface
when i have the situation "no applicable data found".
I cannot use javascript due to requirements in my solution.
can i set some attributes in the START method in the class?
i can see there is an attribute N_NO_DATA which tells if no data is found.
Can i use this in the other methods to hide the complete table including table heading?
Best regards,
Jarle

Hello,
datas are available in the Cube, they are displayed when there is no filter or when only one single value is selected in the filter.
The problem happens when two or more values are selected in the filter.
Example :
The field selected is Profit Center.
Without filter the I can see :
PC1
PC2
PC3
etc...
If I select in filter the value PC1, I can see :
PC1
If I select in filter the value PC2, I can see :
PC2
But If I select in filter the values PC1 and PC2, I can see :
No Applicable Data Found.
BR,
Pedro.

Message "No applicable data found" after executing the report

Hi all,
I have 60 records in a cube which is extracted from a function module. I am able to see the data in the cube but when I execute the report I am getting the message u201CNo applicable data foundu201D. Why is that so?
Can any one please explain me what to do to bring data when the report is executed?
When I execute the query there is only one field selection criteria 0P_FPVANT and this is mandatory. When I checked the data in the cube I didn't find any field 0P_FPVANT but I found a field Fiscal Period Variant with the technical name, 0FISPER
I executed the query in RSRT and there also I am getting the same message, "No applicable data found".
Please advise what do I need to do inorder to get data when the report is executed?
Thank you.
Regards,
Pavan.

I think so.
Ok let me take the other report 0FIAR_C02_Q1003. For this report the selection criteria is
Company code,
Customer and
Period/Fiscal Year
Of these only company code is mandatory. In the data in the cube I see that for co. code BP01 data is available. So I executed the report with co. code as BP01 but no data.
Then I gave co. code BP01 and Period /Fiscal year as 2008, 2008.03, still I see no data.
I tried with values in all the fields that are available in cube
co. code - BP01
Customer - PCS-C10
Period/Fiscal Year - 2008011
Now with respect to Period/Fiscal Year selection field in report, in cube there are 4 columns
Fiscal Year Period,
Posting Period,
Fiscal Year Variant and
Fiscal Year
I've tried all of them but when I enter values in all the fields still I am getting the same error, "no applicable data found".
Please advise.
Thank you.
Pavan.

No Applicable Data Found during query execution !

Hi friends,
I know this question has been posted on sdn so many number of times and i have gone through all of those thread. i checked all the things menssioned in the previous thread and did accordingly, but not able to resolve this issue. Here is the details of the problem encountered:
I am trying to execute a query wihout any selection crieteria. after runnig for 10-15 secs i am getting the following message:
"No Applicable Data Found."
I went to the Infocube manage and checked all the requests are green and "Request for reporting availble" option is also checked for each and every request loaded.
I checked the LISTCUBE Tcode and checked that the data is there.
Any idea how to fix this thing?
manmit

Thanks Bhabu for ur quick reply..actually i am in Production and so i can not remove that filter from the query design. we are using "Current calander month" as the filter. and when i go to the LISTCUBE. how can i put the same filter in LISTCUBE as i can see the date in the list cube upto only 2006 year.
I think it is not getting data because of this filter...as the current month filter takes the data of current month and there is not data for this month in the cube i guess. plz correct me if i am wrong..
assigned points for ur help already...
Manmit

Custom Report for the Stock and Stock value for a specific date

Hi SAP Gurus,
Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
Our system is R/3 4.7
I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
The history tables MBEWH and MARDH are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
Thank you,
-Harter

Hi Harter,
Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Taking display value for calculations using structures in Bex query

Hi
I am using Bex analyzer to do a simple report with two key figures Sales and Plans from cube and two more calculated key figures Abs Deviation and % error. The report displays at category and product levels. Category is higher and one category contains multiple products.
The simple formulas for the two calculated KF are,
1. Abs Deviation = Abs (Sales Plans).
Abs Deviation is set with the property Calculate result as summation to add up Abs deviations at product level to show at Category level.
2. % Error = Abs Deviation / Plan.
The issue is with the % Error value at category level. At product level, all the values are showing correctly.
To illustrate the issue with a simple test case,
CategryProductSale-PlanAbs Dev----%Error
C1--P1--100-60---40--
67%
C1--P2---50120---70--
58%
C1 Total--150180---110--
17%
Observe that in the output the calculation for %Error at product level is correct all the way. But the summary
calculation for Error% i.e. C1 total which is showing as 17% is wrong. The correct value as per the formula should be 110/180 = 61%.
SAP, through OSS replied that it is not a bug but the default behavior of OLAP calculation. OLAP processor first calculates the formula for % Error and then shows the display value at C1 total for Abs Dev. Meaning, % Error is calculated first and next the summation for Abs dev is displayed. Abs dev 110 at C1 level is only a display value but not the value taken for % Error at C1 level. Instead OLAP calculates the Abs Dev at C1 level by Total sale Total plan = 180 150 = 30 and the % Error calculation takes this 30 value in the formula and gives % Error = 30/180 * 100 = 17% at C1 level. But 17% doesn't make any sense to the user. Further, to display value of 61% at % Error at C1, it is being advised that by defining two structures, I can force the calculation to take display value of 110 in the % Error calculation at C1 level by using the cell editor.
Has any body tried to achieve similar result as above by defining two structures and cell editor in the query? If so, can you please throw some pointers of how to define two structures in a query and how to force the % Error at category level to take the display value of 110 in the calculation? I have gone through the documentaion on structures and cell editor but the approach is not at all clear.
Thanks in advance for your suggestions.
Prasad
Unilever Asia IT department

Hi,
Have u read aabout the Formula Collision.
Take a look on this link .
http://help.sap.com/saphelp_bw32/helpdata/en/d2/02223c5f00612be10000000a11402f/frameset.htm
Read the Formula Collision, and let us know , whether your pb is solved by changing the Formula Collision of % error formula.
With rgds,
Anil Kumar Sharma .P
Kindly assign points , If it really helps you.

"No Applicable Data found" message in BEx Analyzer Query

Can anyone help me on this problem? I have encountered this problem when i tried to view the results in analyzer after i completed the database with all the data.
Query - Demo: ICDEMOBC00_Q01 - Key Date: 31.12.9999
Calendar Day
Customer ID
Material number
Key Figures
Sale representative
No Applicable Data Found.

You key date 31.12.9999, is this the date you entered in a variable? If so I presume you don't have data on your system for this time period.
If you take the date filter out of the report do you see data?
Also check if there are any conditions on the report that may be active.
Regards
Gill

Display 0 value for not applicable data found in Company Code Hierarchy

Similar Messages

Maybe you are looking for