Display Drill Level when skipping drill levels with rightlclick/drill tbar.

I have report in which I have a complex if (drillfilters() ....) function to print the proper label for the current drill level.  For instance, if a person drills down to "Region", then the word "region " prints, and when they drill back up to National, the word "national" prints.  I accomplish this by looking at the value of DrillFilters() and assigning a label based on whatever the current value is.
However, DrillFilters() the function is useless when a person right clicks the drill header and uses the menu to drill down (or up) and skip a few levels.  Also, the drill toolbar will kill the drillfilters() function as well.  When using either of these two methods, the value for drill filter doesnt change, or becomes inconsistant.  Does anyone know of a workaround that will allow the drillfilters function (or something similar) to work....
In summary, I need to print a simple section label that represents the value of the current drill level.  Drillfilters is not the total solution.

Did you ever get this resolved?  I have the same question and was wondering if you ever found a solution.
Thanks!
Gabe

Similar Messages

  • IMac won't offer display mirroring option when connecting to HDTV with Thunderbolt to HDMI cable

    I have an iMac, and am trying to connect to my HDTV to use as a second display (mirror). I am using a cable with a Thunderbolt connector at one end, and an HDMI on the other. I know the cable works because I have used it with my MacBook on other TVs. When I use this on my MacBook, I simply open displays, and between the tabs marked "Display" and "Color" there is always an "Arrangement" tab to select. When I try this same setup on my iMac, the only two tabs I can see are "Display" and "Color" - the option to mirror disdplay (or recognize the HDTV in any way) simply doesn't exist.
    I would welcome any help. Thanks much, Doug.

    OK, yes your Mid 2011 has a Thunderbolt port.
    Reset > the System Management Controller
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    and the > NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then try connecting the TV to the iMac.

  • Sequences is displaying wrong media when CS6 project opened with CC

    I recently upgraded from CS6 to CC.  I have many old projects that I have made in CS6.  A few of my clients have requested changes recently and when I opened the project it opened in CC instead of CS6.  This did not seem a big deal to me as I have done this with older versions of Premiere and never had an issue unless for some reason i went back versions.  However this time is different.  I have noticed on more than one project that when I export a sequence something goes wrong.
    Lets say I am working with a wedding reception
    -In preimere it plays fine the first time i open it. 
    -then i export it
    -when i watch my exported clip it is messed up
    -when i reopen the project it plays messed up
    now what i mean by messed up is the clip will start lets say instead of at the entrence of the bridal party but durning the toasts, with the wrong audio to go with it.  that will play through then the dances start.  when it switches to a different clip i will now again be watching footage of the toasts. 
    the sequence within the project looks fine.  each cut clip in the timeline has the right file name, and is trimed how I had it and as for the overall look like i said it looks fine, however upon playback it will play the worng clips just like in the exported file.
    I have no idea why it is doing this of how to fix it quickly.
    anyone have any tips of thoughts.....

    Hi diabetic23,
    Can we get more info, please? What information should I provide when asking a question on this forum?
    Thanks,
    Kevin

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • Resource scope when performing capacity leveling with Optimization method

    Hello,
    Can anyone tell me if, when performing the Optimization method in Capacity Leveling for transportation resources production resources are validated? I am currently testing this and I found out that if the capacity variant of the production resource is no 00, 01 or 02 the system will give an error message when trying to level a transportation resource, the message indicates that there is no available capacity for the production resource.
    When reading documentation in help.sap it appears to me that Capacity Leveling should only focus on the resource to be level not in other resources and in this case my transportation resource has available capacity that shouldn't be affected for master data errors of production resources...
    Could somebody help me clarify this issue?, I have already open a message and they suggested me to change the capacity variant of the production resource, evidently when I do this everything works but I still don't understand why capacity leveling, with Optimization method, of a transportation resources is checking on production resources.
    Thanks!
    Erika

    Hello Ian,
    I am not talking about the SNP Optimization Run that is certainly manipulated by the constraints that you update on the optimization profile; in this case "Capacity Leveling with Optimization Method" the constraints are automatically set by the system and what I need to know is if these constraints are considering not only the resource that is to be leveled (in this case the transportation resource) but also the production resource.
    Sorry but your answer does not correspond to my request, because you are talking about the Planning Optimization run and I am talking about  "Capacity Leveling with Optimization Method".
    Erika

  • To display drill down values in the same table

    Dear Friends,
        Suppose if you apply drill down on one object, it wont appear upper level values of that perticular object. If you want to display all levels of values in the same report during drill down.

    From your view I belive that currently you have a structure in Rows containing Shipping and Sales for Current and Last year. Moreover, you have Year in the column and that is the reason you are getting the numbers in two different columns.
    My suggestion is like this, remove the KFs from the selection of the structure and keep the name of each of the elements as it is. Remove Year from the Column and include them into selections of the structure elements.
    Add the KFs, shipping and Sales into COlumns. Now as you already have restrictions into your selection, your numbers will be restricted in the output, but again here you will have Shipping coming in one column and Sales will be another column.
    But you have above mentioned structure, you can include the cell refercing into the query. Overwrite the value of cells at the intersection (Shipping / Current Year) or (Shipping / Last Year) with the adjustant cells which will be (Sales / Current Year) and (Sales / Last Year).
    ______________________Shipping_____Sales
    Shipping (Current Year)______1000
    Sales (Current Year)__________________1000
    Shipping (Last Yera)_________2000
    Sales (Last Year)_____________________5000
    After you apply cell referencing, 1000 and 5000 sales will be filled in the empty cells next of shipping next to sales.
    - Danny

  • Any way to display row-level errors in AdvancedTable from ProcessRequest?

    I have a page which displays data in an Advanced Table. Users are also able to edit the data on each row, and then save. Upon saving, it will validate the data, and display row-level errors (via either OARowValException or OAAttrValException). That's all working fine.
    The issue I have, is that sometimes data can become invalid from outside of this particular screen. So when a user opens the screen, some of the data displayed is already invalid. If the user saves, without changing anything, they'll see the errors. I want to show the errors immediately, without them having to save on every range of records. So I basically want to re-validate everything when it is first displayed, so from ProcessRequest. Is there any way to actually do that? I've tried several ways, but nothing seems to work.

    Hi,
    I havent used it but u can try with the below logic
    Write ur logic in AM...
    Import oracle.apps.fnd.framework.OAAttrValException
    Import oracle.apps.fnd.framework.OARowValException
    //Iterate through all the rows.
    if(attr1!=attr2)
       throw new OARowValException (
            getEntityDef().getFullName(), // entity full definition name
            getPrimaryKey(),              // entity object primary key
            "FND",                        // message application short name
            "ATTR_EXCEPTION");            // message name Regards,
    Gyan

  • Display different level for same hierarchy value in BO 4.0

    Hi Expert,
    I have one question for Webi for BO 4.0
    We have one hierarchy in BW side and we hope to display differet level in same report for different column
    For example, column A is for level 6. column B is for level 7.
    Do you know how to releaze this in Webi side?
    In the 3.X version, we have different dimension for different level.
    But now in BO 4, it has been combined into one\
    Thanks and best regards
    Alex yang

    Hi,
    You can still do this in BI 4.0, if you use the old 'legacy'  MDX OLAP.unv from Universe Designer tool .
    Yes, with the BICS connection,  you are getting a native hierarchy, as it would be displayed in an OLAP environment.
    Cheers,
    H

  • Use of Planning Table (MF50) in Capacity Levelling with Production Order

    Hello Experts
    I wish to know that is it possible to perform Capacity Levelling in planning table (tcode MF50) with respect to a Production Order ? It is known that MF50 is used in Repetitive manufacuring to do the capacity levelling with respect to Planned orders. But in our discrete manufacturing scenario we want to use planning table to the capacity levelling with respect toa Production order.
    Any clue or help pertaining to this will be highly appreciated.
    Thanks in advance
    Regards
    Jayanta

    Dear ,
    MF50 is does the cacapcity leveling based on mateail -run schedule order (planned order ) where as in discrete manufacturing , when you run the MRP ,  MRP system assume Infinite Capacity  and schedule the order as per your selection in MD02(2,1,3,3,2)  and then you convert those planned order to Production order .Here you checkied the Capacity in Production Order level .
    In stanadrd SAP  , it is not possible to use MF50 for discrete production order.
    In discrete order or process order ,  do the caapcity leveling , there are seperate planning table available based on Over all Capacity Profile and Schedule type .This can be done  in following way :
    1.CM31-Production Order Wise -Tabular
    2.CM23-PO wise -Graphical
    3.MC88: Ruf Cut Planning
    Work Centre Wise : CM21 -Graphical , CM22-Tabular Planning Table .
    Make sure the below set up before  you carry on the Capacity leveling :
    .Define time profile in OPD2.
    Define the strategy profile in OPDB
    Define the Overall profiles in OPD0.
    In OPJK  maintained check capacity with SAPSFCG013 profile for your production order type
    In OPU3 , scheduleing parametre s: Generate Capacity , Scheduling Type , Automatic Log ,Start date in Past as per your req.
    In OPJU , chekc the contol tab of the scheduleing as per OPU3
    In OPKP- Production scheduling paranmeters assing the overall capacity profile -SAPSFCG013  with finte scheduling tick.
    Master Data :
    1.Materials Master define the Production scheduler and production scheduling profile
    2.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
    3.Routing - enter the values for the standard values. Use control key with scheduling.
    Hope this will help you .
    Regards
    JH

  • Can not assign custom access level with a user login

    Hi,
    I am using Business objects XiR3. When I am loging in with a user having full control access and then I select a folder added a principal from user sercurity and when I am trying to add custom access level it gave me error
    An error occurred at the server during security batch commit: Request 0 of type 38 failed with server error : You do not have sufficient rights to make the requested security changes.
    it allow me to give access to standard access levels. also when I tried to assign custom access level with administrator user, it assigns custom access level to a principal without error.
    Can any body tell me what I am doing wrong?
    Thanks in advance,
    Rajendra

    Hi Rajendra,
    You have to make sure that the user group has the right 'Use access level for security assignment' assigned as granted on the access level you created. You can find this right under System / Access Level. That should do the trick!
    Hope this helps...
    Martijn van Foeken
    Focuzz BI Services
    http://www.focuzz.nl
    http://nl.linkedin.com/in/martijnvanfoeken
    http://twitter.com/mfoeken

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

    I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

    More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

  • Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

    Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

    If you are going to use Mac OS X and its associated applications, and a BootCamp partition with Windows 8, and MS Office and all of the work created there, you will more than likely run out of space on a 128 GB SSD pretty quickly...especially if you put any music, photos or videos on it.  Those things take a lot of space so you will have to be very, very careful about what you want to put on a 128 GB storage space.  You would be better off going for 512 GB with what you plan on doing with it.

  • Displaying different levels of the same hierarchy in the different columns

    I have a parent child hierarchy and wish to display different levels of the hierarchy in different columns of the resultset eg
    level 1 level 2
    Europe UK
    Europe France
    N America US
    N America Canada
    However writing MDX like the below
    select
    {} on 0,
    ([Geo].[level 1],[Geo].Level 2] on 1
    from cube
    results in the error "The [Geo] hierarchy is used more than once in the crossjoin
    How can I get around this??

    Hi,
    You can make use of CrossJoin function in MDX, I give a sample MDX based on the AdventureWorks database:
    select {[Measures].[Reseller Sales Amount]} on 0,
    crossjoin({[Sales Territory].[Sales Territory Group].[Sales Territory Group].members},{[Sales Territory].[Sales Territory Country].[Sales Territory Country].members}) on 1
    from [Adventure Works]
    After execut the MDX you will get the result like this:
    Reseller Sales Amount
    Europe
    France
    $4,607,537.94
    Europe
    Germany
    $1,983,988.04
    Europe
    United Kingdom
    $4,279,008.83
    NA
    NA
    (null)
    North America
    Canada
    $14,377,925.60
    North America
    United States
    $53,607,801.21
    Pacific
    Australia
    $1,594,335.38
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    If you think you're insane now, try maintaining those pop up menus.
    As far as I know, these menus have not been updated since FW 8, so 
    they are at least two versions old.
    Save yourself a lot of grief by avoiding those menus. There are many 
    other products on the market which do a much better job of creating 
    and maintaining this type of navigation structure.
    Read this link before you climb any higher on this slippery slope:
    http://apptools.com/rants/jsmenu.php
    There was another blog post by the fellow who originally wrote the pop 
    up menu feature, but I can't seem to locate it. Even he says stay away 
    from them.
    Not the answer you probably want, but I hope it helps, nonetheless.
    Jim Babbage

Maybe you are looking for