Display not flush with the case
Hi,
I just got my brand new macbook pro 15"...
I notice the the display on the hinge side...the left and right don't have equal amount of gap between the display and the case. The difference is quite noticeable.
Also when looking from DVD-ROM side, the display and the case are perfectly flush but from the ports side, the gap is larger on the hinge side than the front.
Is this normal?
A new machine should be perfect out of the box. Take it to an Apple Store.
Message was edited by: macbig
Similar Messages
-
Third-party not defined in the case of vendor with plant assignment ?
We use a Third-Party Vendor to direct-ship some products directly to our Customers.
When transfers third party order form's PR STO PO, prompts the following information
Third-party not defined in the case of vendor with plant assignment
Message no. 06769
Diagnosis
You are entering a purchase transaction involving a vendor to whom a plant has been assigned. Normally, this will involve the transfer of materials from one plant to another.
This process necessitates a delivery and a billing document in the SD system. The PO appears directly in the delivery due list of the issuing plant (vendor) and therefore does not need to be transmitted.
However, an item with the procurement form "third-party" (triangular business deal) cannot appear in the delivery due list.
Procedure
An item with the procurement form "third-party" can only be ordered from vendors without a plant assignment.
how should solve?
Many thanks, Adny.
Edited by: Andy Yao on Feb 8, 2010 3:58 AMHi Andy
Why u doing stock transfer order,in third party sales there is no stock transfer
Follow below procees for third party sales( Vendor ship materials directly to customer)
Create Sales order(Use item category TAS) >>> Purachase requisition(Automatically from order) >>> Purchase order >>> Vendor Invoice Verification >>> Invoice to customer
Kapil -
My backup is failling to restore and displays an error message: backup either corrupt or not compatible with the device. This happened after updating to the latest software IOS7
I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.
-
Sidebar not flush with top border
I am brand new to web design and DW. I can't figure out how to bring my left sidebar flush with the header of the page. I am following along in the DW-CS6 Class in a book. Here is the code.
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<title>Untitled Document</title>
<style type="text/css">
<!--
body {
background-color: #FFF;
margin: 0;
padding: 0;
color: #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 100%;
line-height: 1.4;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing block. The remaining bottom margin will hold it away from any elements that follow. */
padding-right: 15px;
padding-left: 15px; /* adding the padding to the sides of the elements within the blocks, instead of the block elements themselves, gets rid of any box model math. A nested block with side padding can also be used as an alternate method. */
.sidebar1 aside {
font-size: 90%;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color: #42413C;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #6E6C64;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~ This fixed width container surrounds all other blocks ~~ */
.container {
width: 950px;
background-color: #FFFFFF;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
border: 2px solid #060;
#logo {
position: absolute;
width: 170px;
height: 158px;
z-index: 1;
margin-top: 10px;
margin-left: 30px;
/* ~~ The header is not given a width. It will extend the full width of your layout. ~~ */
header {
background-color: #090;
background-image: url(images/banner.jpg);
background-repeat: no-repeat;
height: 130px;
/* ~~ These are the columns for the layout. ~~
1) Padding is only placed on the top and/or bottom of the block elements. The elements within these blocks have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the block itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the block element and place a second block element within it with no width and the padding necessary for your design.
2) No margin has been given to the columns since they are all floated. If you must add margin, avoid placing it on the side you're floating toward (for example: a right margin on a block set to float right). Many times, padding can be used instead. For blocks where this rule must be broken, you should add a "display:inline" declaration to the block element's rule to tame a bug where some versions of Internet Explorer double the margin.
3) Since classes can be used multiple times in a document (and an element can also have multiple classes applied), the columns have been assigned class names instead of IDs. For example, two sidebar blocks could be stacked if necessary. These can very easily be changed to IDs if that's your preference, as long as you'll only be using them once per document.
4) If you prefer your nav on the left instead of the right, simply float these columns the opposite direction (all left instead of all right) and they'll render in reverse order. There's no need to move the blocks around in the HTML source.
.sidebar1 {
float: left;
width: 180px;
background-color: #EADCAE;
padding-bottom: 10px;
.content {
padding: 10px 0;
width: 770px;
float: right;
.content h1 {
font-size: 200%;
margin-top: 10px;
margin-bottom: 5px;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0 15px 15px 40px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
nav p {
font-size: 90%;
font-weight: bold;
color: #FFC;
background-color: #090;
text-align: right;
padding-top: 5px;
padding-right: 20px;
padding-bottom: 5px;
border-bottom-width: 2px;
border-bottom-style: solid;
border-bottom-color: #060;
background-image: url(images/background.png);
background-repeat: repeat-x;
nav p a:link, nav p a:visited {
text-decoration: none;
color: #FFC;
padding: 5px;
nav p a:hover, nav p a:active {
color: #FFF;
background-color: #060;
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
list-style: none; /* this removes the list marker */
border-top: 1px solid #666; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
margin-bottom: 15px; /* this creates the space between the navigation on the content below */
ul.nav li {
border-top-width: 1px;
border-right-width: 1px;
border-bottom-width: 1px;
border-left-width: 1px;
border-top-style: solid;
border-right-style: solid;
border-bottom-style: solid;
border-left-style: solid;
border-top-color: #0C0;
border-right-color: #060;
border-bottom-color: #060;
border-left-color: #0C0;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
padding: 5px 5px 5px 15px;
display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
width: 160px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
text-decoration: none;
background-color: #090;
color: #FFC;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
background-color: #060;
color: #FFF;
/* ~~ The footer ~~ */
footer {
padding: 10px 0;
background-color: #090;
position: relative;/* this gives IE6 hasLayout to properly clear */
clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
font-size: 90%;
color: #FFC;
background-image: url(images/background.png);
background-repeat: repeat-x;
/*HTML 5 support - Sets new HTML 5 tags to display:block so browsers know how to render the tags properly. */
header, section, footer, aside, article, figure {
display: block;
.green {
color: #090;
-->
</style><!--[if lt IE 9]>
<script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script>
<![endif]--></head>
<body>
<div class="container">
<div class="green" id="logo"><img src="images/butterfly-ovr.png" width="170" height="158" alt="GreenStart Logo"></div>
<header></header>
<nav>
<p><a href="#">Home</a> | <a href="#">About Us</a> | <a href="#">Contact Us</a></p>
</nav>
<div class="sidebar1">
<ul class="nav">
<li><a href="#">Green News</a></li>
<li><a href="#">Green Products</a></li>
<li><a href="#">Green Events</a></li>
<li><a href="#">Green Travel</a></li>
<li><a href="#">Green Tips</a></li>
</ul>
<aside>
<img name="Sidebar" src="" width="180" height="150" alt="">
<p>Insert caption here</p>
</aside>
<!-- end .sidebar1 --></div>
<article class="content">
<h1>Insert main heading here</h1>
<section>
<h2>Insert subheading here</h2>
<p>Insert content here</p>
</section>
<!-- end .content --></article>
<footer>
<p>Copyright 2012 Meridien GreenStart. All rights reserved.</p>
<address>
Address Content
</address>
</footer>
<!-- end .container --></div>
</body>
</html>
Any help would be greatly appreciated.Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
margin-bottom: -2px;
Your nav p will then look like this:
nav p {
font-size: 90%;
font-weight: bold;
color: #FFC;
background-color: #090;
text-align: right;
padding-top: 5px;
padding-right: 20px;
padding-bottom: 5px;
border-bottom-width: 2px;
border-bottom-style: solid;
border-bottom-color: #060;
background-image: url(images/background.png);
background-repeat: repeat-x;
margin-bottom: -2px; -
Accounting doc entries not matching with the the entries from j_1ipart2 entries
Hi,
After creating PO, I have done MIGO and J1IEX. Now, posted MIRO. The end screen shows a number stating accounting document created.
I checked the accounting doc in fb03 and the document is displayed over there. I also checked the table for values captured in PART2 of excise. The value displayed in table is not matching with the value displayed in accounting document. Can anyone help?Hello Tejas,
Here is the updated version of the situation.
After the transaction J1IEX, I got a message saying an 'Accounting Document' has been created. But the accounting document number does not match with the original values. I checked all the tables and found out that the accounting document is not created.
In this case, I thought of creating an accounting document manually and adding them directly to the table.
Here are my questions,
-Can I manually create an accounting document for multiple line items?
-Few tax values should be split and should go to 2 different GL accounts. so how to do this if I am creating it manually
-Or can I delete the values captured during 'J1IEX' in the table and reopen the GR so that the t-code j1iex can be processed again? -
Slave instance can not synchronized with the master for a long time
Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170 Number of PERM messages not acknowledged
9245 Number of messages queued due to network delay
172415 Number of messages discarded due to queue length
25880 Number of existing connections dropped
3407 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994 Next LSN to be used
0/0 Not waiting for any missed log records
328872/466092 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
2323 Number of duplicate log records received
0 Number of log records currently queued
6768 Maximum number of log records ever queued at once
55284 Total number of log records queued
120M Number of log records received and appended to the log (120475988)
111 Number of log records missed and requested
2147M Current master ID (2147483647)
2 Number of times the master has changed
0 Number of messages received with a bad generation number
8505306 Number of messages received and processed
12 Number of messages ignored due to pending recovery
471869 Number of failed message sends
12M Number of messages sent (12959945)
0 Number of new site messages received
1 Number of environments believed to be in the replication group
990543 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup complete
6244678 Number of transactions applied
0 Number of startsync messages delayed
1 Number of elections held
1 Number of elections won
No election in progress
0.057097 Duration of last election (seconds)
8944103 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
5273M Number of records added to a bulk buffer (5273592170)
10M Number of bulk buffers sent (10490865)
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
slave db_stat:
0 Number of PERM messages not acknowledged
0 Number of messages queued due to network delay
0 Number of messages discarded due to queue length
1454 Number of existing connections dropped
0 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048 Next LSN expected
330433/2013808 LSN of first log record we have after missed log records
329543/5500501 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
5256M Number of duplicate log records received (5256599432)
3925284 Number of log records currently queued
3925285 Maximum number of log records ever queued at once
4880561 Total number of log records queued
3578038 Number of log records received and appended to the log
1912297 Number of log records missed and requested
0 Current master ID
1 Number of times the master has changed
0 Number of messages received with a bad generation number
12M Number of messages received and processed (12980442)
2 Number of messages ignored due to pending recovery
0 Number of failed message sends
1912307 Number of messages sent
0 Number of new site messages received
0 Number of environments believed to be in the replication group
0 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup incomplete
110568 Number of transactions applied
80 Number of startsync messages delayed
0 Number of elections held
0 Number of elections won
No election in progress
0 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
0 Number of records added to a bulk buffer
0 Number of bulk buffers sent
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike -
Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
MrudualaYou are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo -
Windows "Easy Connect" does not reply with the password / "Easy Connect is not Available"
Hello,
I have posted a related question some time ago, which was eventually resolved. However, after some time a problem with Easy Connect (used for MSRA) came back:
Whenever I arrive at the point in setting up a MSRA session where Easy Connect is needed, I get the reply: "Easy Connect is not Available". Here is an example of the problem:
Start MSRA
--> as expected, a window with "invite someone to help you" and " Help some who has invited you" appears
Select "invite someone to help you"
--> as expected, a window with "Who do you want to get help from" appears
Select "Invite someone to help you"
--> as expected, a windows with "How do you want to invite your trusted helper?" appears
Select "Use Easy Connect"
--> as expected, the temporary "Create invitation window / checking network capabilities" window appears
Next, I would expect this windows to close a new window to provide me with the Easy Connect password. However, instead I get the window "Easy Connect is not available".
I cannot continue. (I have screenshots so can repost with them if that would clarity my question)
Any suggestion how to resolve would be appreciated.
(Please do not reply with the 3 suggestions from the FAQ (both computers must run windows 7 / Access to internet is limited / your router does not support Easy Connect - doesn't help)
More background information and things I have tried:
The "Easy Connect is not available" window offers the "Tell me more about how to fix this problem" which I have tried, but those suggestions do not help
If I use the other MSRA option: "Help someone who has invited you" (this would be my typical use case), followed by "help someone new" and than select "Use Easy Connect", I also get the "Easy Connect is not available"
window instead of the expected option to enter the Easy Connect password. I believe this is that same problem.
This happed with both the 32 as well as the 64 MSRA versions
I'm using Window 7 Ultimate, 64 bit with all the latest updates
This desktop PC is wired to the internet via an Edimax gigabit switch, a Dlink DIR-855 wireless router and a fiber modem in bridge mode
The W7 desktop has a single active network connection only
I'm using Windows Firewall and Windows Security Essentials
Disabling the firewall on the PC did not help
Network discovery is enabled in Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings (that’s UPnP – right?)
The Internet Connectivity Evaluation Tool does not seem to be available anymore from MSFT sites
Restarting "Peer Name Resolution Protocol" did not help
Restarting "Peer Networking Identity Manager Properties" did not help
Starting up with a "Clean Boot" (disabled all non-Microsoft services using MSConfig) did not help
I would also be interested to understand how I can check on the status of the "Easy Connect" service. Is this a service hosted somewhere, or??
Thanks!Dear Andy,
Thanks a lot for your reply. Let me answer your questions:
Q: Could you use the other methods: save this invitation as a file and use e-mail to send invitation?
A: yes, that way I can establish a MSRA connection
Q: Have you disable other network connections, including disable all virtual network card?
A: if I check with ‘Device Manager/Network Adapters’ (or Control Panel/Network and Internet/Network Connections) I see two network adapters (my Asus motherboard has two network connectors). Both are available, but only one is used. I have
disabled one. Unfortunately, this does not solve the problem. I will leave it disable for now.
Q: To find detailed information about this issue, please locate to event view and find the logs about remote assistance.
A: I have to admit that the Event Viewer is unfamiliar territory for me. So, I’m not sure where and what to look for. However, as suggested, I found "Event Viewer (local)/Applications and Services Logs/Microsoft/Windows/Remote assistance/Operational".
Each time, I attempt to use MSRA/Easy Connect, it seems two entries are added. As I cannot seem to upload files with this post, here are just the two entries:
“Diagnosis Repro Attempt resulted in a failure.”
“Remote Assistance troubleshooting has confirmed the problem: Remote Assistance Easy Connect isn't available.”
If you need more details, please suggest what to forward or check. I'm eager to find a solution!
W. -
Display not working with new operating system
I recently installed OS X version 10.8.2 and now my large apple display will not work with the MacAir. Anyone know how to fix this?
Return to place of purchase while in your 14 days from date of purchase window. You may have a defective monitor or GPU.
-
I am using iphone 3GS, after syncing for few times and got the errors. I deleted the backup from Edit-> Preferences-> Devices. Then I synced again, there was an error message: itunes could not back up the iphone because the backup was corrupt or not compatible with the iphone. What can I do? I have no backup anymore on ituens.
babesharon
I closed iTunes & manually deleted the file which was still stored locally even though it didn't display in Preferences. I have vista so I went to
C:\Users\{user name}\AppData\Roaming\Apple Computer\MobileSync and deleted everything in the Backup folder (though I left the folder as is). If you have a different OS search the apple website for the backup location.
I reopened iTunes & Synced with out a problem. I also got the update to install.
Good luck. -
SAP format is not matching with the bank format
Hello,
I have created an invoice for a specific vendor and run the transaction F110 ,created a proposal and carried out a payment run.
Later when I go to Environment --> Payment Medium --> DME Administration and choose one item and try to display it, the data
medium contents are being displayed correctly.But the displayed Data medium contents are not matching with the bank format
for which the payment transaction has been made.
Would request you to suggest the changes to be made either in DME or the corresponding ABAP code for making the Data
medium contents match with the bank format.
Regards,
Vineela.
Edited by: Vineela S on Jul 27, 2011 8:24 PMHi Kumar,
There could be three reasons.
1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
Hope this will help you. If not clear please reply, I will explain you.
Pl. assign points if useful.
Thanks -
SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"
I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
I am trying to install Acrobat XI Std silently by SCCM.
I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
Is there a way to check the language specified for ym serial number?
BryndonUpdate on a couple of details:
@Sabian,
Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
@Sebastian
I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors. -
I just installed LiveCycle ES on a Windows 2003 virtual machine using the WebSphere application server.
Everything is finally installed, but now when I try to access the adminui url (http://xxxxx:9080/adminui/login.faces) I receive the following exception:
Error 500: com.ibm.ws.jsp.JspCoreException: Unable to convert string 'adminUIResources' to class javax.el.ValueExpression for attribute basename: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
Am I missing something? What now?You shouldn't have any appserver specific libraries in WEB-INF/lib (covered by the webapp's default classpath). Further on the appserver/lib (covered by the appserver's default classpath) should only contain appserver specific libraries and at highest 3rd party libraries which are going to be shared among all webapps. Finally you should NOT have added or modified anything in the jdk/lib (covered by the runtime's default classpath).
So in case of a default and unmodified environment everything should just work flawlessly. In your specific case it seems that you've unnecessarily added/copied appserver specific libraries in the WEB-INF/lib or that you have duplicated EL libraries from (another) appserver in the appserver/lib or maybe -more worse- in the jdk/lib. -
Property Editor not registered with the PropertyEditorManager
I´m trying to integrate a fully working jsf 1.1 application into JBoss 4.2.2 which uses jsf 1.2 which isn´t that compatible at all.
I just have one implementation of the jsf-libs and not any in the application war.
"ERROR [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[samigo].[jsp]] Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: Unable to convert string "#{authorFrontDoorMessages.auth_front_door}" to class "javax.el.ValueExpression" for attribute "value": Property Editor not registered with the PropertyEditorManager".
And yes, i have been searching a lot on google and read a lot of the article and forum threads but i haven´t been able to solve this.
I have been struggling with this problem more than a week now, so please give me a tip on what the problem might be.
Any idea?You shouldn't have any appserver specific libraries in WEB-INF/lib (covered by the webapp's default classpath). Further on the appserver/lib (covered by the appserver's default classpath) should only contain appserver specific libraries and at highest 3rd party libraries which are going to be shared among all webapps. Finally you should NOT have added or modified anything in the jdk/lib (covered by the runtime's default classpath).
So in case of a default and unmodified environment everything should just work flawlessly. In your specific case it seems that you've unnecessarily added/copied appserver specific libraries in the WEB-INF/lib or that you have duplicated EL libraries from (another) appserver in the appserver/lib or maybe -more worse- in the jdk/lib. -
Recovery scenario - Voting disk does not match with the cluster guid
Hi all,
Think of you can not start your guest VMs just because it has a corrupted system.img root image. And assume it contains 5 physical disk( which are all created by the RAC template) hence ASM on them.
What is the simplest recovery scneario of the guest vms (RAC)?
Can it be a feasible scenario for recover of the availablity? (Assume both of the RAC system images are corrupted and we prefer not a system level recovery rather than backup / restore)
1. Create 2 RAC instances using the same networking and hostname details as the ones that are corrupted. - Use 5 different new disks.
2 Shutdown the newly created instances. Drop the disks from the newly created instances using VM manager.
3. Add the old disks whose system image is failing to be recoverd but ASM disks are still in use (from the newly created instances using VM manager.) to the newly created instances.
4. Open the newly created instances
Can we expect the ASM and CRS could be initialized and be opened without a problem?
When I try this scenario I get the folllowing error from the cssd/crsd .
- Cluster guid 9112ddc0824fefd5ff2b7f9f7be8f048 found in voting disk does not match with the cluster guid a3eec66a2854ff0bffe784260856f92a obtained from the GPnP profile.
- Found 0 configured voting files but 1 voting files are required, terminating to ensure data integrity.
What could be the simplest way of recovery of a virtual machine that has healthy ASM disks but corrupted system image?
Thank youHi,
you have a similar problem, when trying to clone databases with 11.2.
The problem is that a cluster is uniquely identified, and this information is hold in the OCR and the Voting disks. So exactly these 2 are not to be cloned.
To achieve what you want, simply setup your system in that way, that you have a separate diskgroup for OCR and Voting (and ASM spfile), which is not to be restored in this case of szeanrio.
Only all database files in ASM will then be exchanged later.
Then what you want can be achieved.
However I am not sure that the RAC templates have the option to install OCR and Voting into a separated diskgroup.
Regards
Sebastian
Maybe you are looking for
-
Whenever I open a new tab, the new tab opens to a yahoo search page. It used to open to just a blank tab and changed somehow. I've been unsuccessful at changing it back.
-
How to log exception from a struts action class
Hi guys, I am recoding my application to use the strut framework. There's one small thing i wonder is that how i can log an exception arrise in an action class. In my original servlet, wherever an exception arise, i use: catch(Exception e) g
-
Creating billing after MIRO in third party sales
HI Gurus, we have a senario in Third party sales senario how to restrict the user to make to delivery and billing before the MIGO and MIRO. please help us this is urgent. Thanks in Advance.
-
Flashing Folder with question mark when turning on
My friend was running MacScan. All the sudden, it was blocked. He waited and nothing happened. He turned it off. Turned it back on, but nothing changed so he took the battery out. When he tried to turn it back on, there was nothing for about a minute
-
Lost AM when browsing on new opened window
Hi All, I have a custom OAF page with couple subtabs for user entering order. There is a checking button I created to open a new java script window with a jsp page for user checking inventory. When I opened the window, I retained AM and user have no