Display of change docs in CUA

Hi All,
When we see the change docs in CUA system, it will only show the admin name for roles added to CUA client, for other child systems we need to check in respective systems. But in child system it will show that change is done by system user used for RFC connection. My question is how do I know who assigned a particular role to user in child system through CUA.
Please advice.
Regards,
Sushma

Hi,
Look into this Transaction code # S_BCE_68002311 (Report # RSUSR100N) for CUA Chagne Documents for Users.
You Could see direct assignmnet roles change document from CUA under CUA Systems/Roles/Profiles Tab.
For Indirect Assignment look into OM through (PP01, PO13, PO13D) B007 - AG relationship for who assigned this Role.
Regards,
Asif

Similar Messages

W530 : How to connect 4 external displays without USB DOC

I want to connect multi displays without USB-DOC.
Is it correct as follows?
1. Change connector type from mini-display port to display port.
2. "Display port to Dual display port adaptor" connect.
3. At Each port, more "Display port to Dual display port adaptor" connect..
Please tell me solution.
Thanks.
Solved!
Go to Solution.

This setup won't work.
You would need a Series 3 Dock workstation with 2 sets of DP ports.
Then you would need a dp splitter for each of the DP ports on the dock.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

ChaRM: read categorization of change docs based on transport request ID

Hi There,
We have ChaRM implemented with 4 level categorization. I am writing a report to find change docs and read their categorization based on a transport request attached to the change doc. Unfortunately I can't figure out the connection. Could you pls give me guidance? Thanks in advance!
Ádám

In the meantime I found a very useful article on the wiki: http://wiki.scn.sap.com/wiki/display/Snippets/Reading+CRM+Transaction+Categories+Hierarchy
If you need my complete code, drop me a mail.
Thanks,
Ádám

Master-detail: detail field not displayed after changed by master field

I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

External display resolution changes after returning from display sleep

I often use an external display as a second screen with my Macbook Pro (OS X 10.8.2) However, when I return to the computer after the display has gone to sleep, the external display resolution changes when the display reappears. Then I have to go into System Preferences > Display and "Detect Displays" in order to return the external display to the proper resolution.
Does anybody know of a way for me to avoid having to do this every time my display sleeps?
Thank you,
Adam

I have the exact same problem.
I found the key combination ⌘ alt F2 also restores the proper resolution on both displays, however it's still a bit annoying

How to use Change doc Function Module?

Fn mod:ZSUBTESTCHG_WRITE_DOCUMENT
Import parameters               Value
OBJECTID                        ZSUBTESTCHG
TCODE                            SE37
UTIME                             00:00:00
UDATE                             09.03.2009
USERNAME                        'TESTUSER'
PLANNED_CHANGE_NUMBER
OBJECT_CHANGE_INDICATOR            I
PLANNED_OR_REAL_CHANGES         R
NO_CHANGE_POINTERS
UPD_ICDTXT_ZSUBTESTCHG               I
N_ZSUBTEST                         2         TEST
O_ZSUBTEST                         2         TEST
UPD_ZSUBTEST                    I
Tables                          Value
ICDTXT_ZSUBTESTCHG                 0 Entries
I have a ztable 'ZSUBTEST' with 2 fields DEPTID and DEPNAME and ticked "change document" for data element.
I have created the above change doc write fn module. I am trying to insert a new reocrd into table.
How to use ZSUBTESTCHG_WRITE_DOCUMENT so that even if i try to change an existing record in ztable the old and new values for a particulat ztable will be filled in CDPOS Table.
Would appreciate if you can suggest me how to use in1) Update and 2) Insert scenarios.
Thanks,
Subba

hi check this,
Types Declaration***
types: BEGIN OF X_audit,
Field of ZAUDIT TABLE OR a custom created table------
       END OF X_audit.
Data Declaration***
Data: w_newvalues type X_audit,
      w_oldvalues type X_audit.
DATA: BEGIN OF t_cdtxt OCCURS 0.
        INCLUDE STRUCTURE cdtxt.
DATA: END OF t_cdtxt.
DATA: l_tcode type cdhdr-tcode ,
       l_time type cdhdr-utime,
       l_usnam type cdhdr-username,
       l_date type cdhdr-udate.
**Constants****
CONSTANTS : l_objectid TYPE cdhdr-objectid VALUE 'ZAUDIT_CD'.
Initialization.
Clear: l_tcode,l_time, l_usnam, l_date.
Clear: w_newvalues, w_oldvalues.
**Start-Of-Selection**
Start-of-selection.
*Populating w_oldvalues workarea with old values from the table
Select single * from zaudit_t
                Into w_oldvalues
                Where belnr eq belnr_1
                And gjahr eq gjahr_1
                And bukrs eq bukrs_1. u201C where, belnr_1, gjahr_1, bukrs_1 are the fields on selection screen.
here we are populating w_newvalues workarea with new values
W_newvalues-f1 = w_oldvalues-f1
f2 = u2018XXXXXXXu2019     -
f3 = u2018YYYYYYYu2019
f4 = u2018ZZZZZZZu2019
l_tcode = sy-tcode.
l_time = sy-uzeit.
l_usnam = sy-uname.
l_date = sy-datum.
modify the table with new values***
MODIFY zaudit_t FROM w_submit.
IF sy-subrc EQ 0.
    MESSAGE 'Document Updated' TYPE 'S'.
call function 'ZAUDIT_CD1_WRITE_DOCUMENT'
    exporting
      objectid                   = l_objectid
      tcode                      = l_tcode
      utime                      = l_time
      udate                      = l_date
      username                   = l_usnam
    PLANNED_CHANGE_NUMBER      = ' '
      object_change_indicator    = 'U'           u201CU-update, I-insert, D-delete
    PLANNED_OR_REAL_CHANGES    = ' '
    NO_CHANGE_POINTERS         = ' '
      upd_icdtxt_zaudit_cd       = 'U'
      n_zaudit_t                 = w_newvalues u201Cpass the work area containing new values
      o_zaudit_t                 = w_oldvalues u201Cpass the work area containing old values
      upd_zaudit_t               = 'U'         u201C this parameter gives the values in the columns(new value, old value and changed field name) of table CDPOS.
    tables
      icdtxt_zaudit_cd           = t_cdtxt
ELSE.
   MESSAGE 'Document Not Updated' TYPE 'S'.
ENDIF. u201CIF sy-subrc EQ 0.

Problem with Change Doc BANF for BUS2009

Hi,
The scenario of mine is to trigger the REJECTION_STOP event of BUS2009 when a PR rejection is cancelled for that I am using Change documents.
I have created an entry in SWEC for change doc object BANFand BO BUS2009- REJECTION_STOP.
The problem is the Event Container is not getting filled and bcoz of that Workflow is going on error.When I see the Workflow log in SWi1 I can't find the values for my WF container element BUS2009.
Do I have to explicitly fill the Event container in my case.If so how to do that
Kindly suggest....

Hi,
Please Check all Binding Parts...that is the Problem over there..
Go to SWUE enter ur Object and Event and check in SWEL and in ur Inbox.
Thanks and Regards,
Prabhakar Dharmala

My display keeps changing to 800x600 after upgrade to 10.8.3

After upgrading to 10.8.3 my display keeps changing to 800x600 after it wakes up from sleep. I have to go to preferences and set again, and it works. It is quite annoying. Any clue.

Not much to go on.
What monitor and connection method are you using with the mac Mini..?
Have you tried resetting the > NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
Thank you.
Solved!
Go to Solution.
Attachments:
Doc2.docx ‏554 KB

Hopefully I can explain it well enough. It really is simple.
1) Create an empty global variable and call it something like User Interface References.vi
2) For each and every control and indicator on your front panel, right-click and select Create/Reference
3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
4) For each of the references, right-click and select Create/Indicator
5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
Hopefully this all makes sense. If not, let me know.

System hanging when i try to display or change or create a function module?

Hi Experts,
My system is hanging when i try to display or change or create a FM using SE37 transaction. I am able to execute SE37 transaction but when i give a FM name which is already existing, the system is getting hanged up. If i give a FM which is not present in the system and try to display it, it gives an error "FM does not exists". I have unistalled the SAP logon and reinstalled it again and restarted my system but still this problem is encountered.
Can any one please help me in this issue??
Thanks a lot in Advance!
Regards,
Lakshman.

Hi Prasad,
Go to se38 transaction and look at UTILITIES-> Settings-> ABAP editor-> Change front-end editor to old(if it is new) and check once. Hope this solves your problem becuase this is what i have done for my problem and let me know whether the problem has been solved.
Regards,
Lakshman.
Edited by: lakshman reddy G on Mar 5, 2009 5:54 PM

Display Field "Purchasing Doc No" & "Vendor" in GL Line item of FAGL003 rep

Dear Experts,
To display of Purchasing Doc No (EBELN) & Vendor(LIFNR) in GL line item of FAGLL03 report we have added both the field in the customization setting of Special Fields in GL Line Item using the following path:-
Financial Accounting(New)
     General Ledger Accounting(New)
        Master Data
           G/L Accounts
              Line Items
                Define Special Fields for Line Item Display
After the request got transported to quality client the fields Purchasing Doc No (EBELN) & Vendor(LIFNR) disappears from the lay out list of FAGLL03 report.
All the screen shots are furnished in the attached file.
Please advise.
Regards,
Alok Parida
FI Core Team

Hi Seetaramaiah,
Please regenerate structure according to following steps.
Call transaction SE37, enter the function module ITEM_STRUC_EXTENSION and
execute it with the following parameters:
BASIC_STRUCNAME: FAGLPOSY
EXT_STRUCNAME: FAGLPOSYEXT
EXT_FIELDS_TABNAME: T021S
I_LSTCL: D
X_TRANSPORT: ' '
Regards,
Joseph

Can't display archive change documents for agreement (COND_B)

Hello,
I want to display archive change document for object class : COND_B (agreement) via transaction MEB3:
The archive works fine, and I can found the archive change documents form SARA.
(Archive Objetc = CHANGEDOCU
Archive info structure = SAP_CHANGEDOCU2 (is active))
But the display from the application transaction : MEB3 doesn't work.
In the DEBUG:
the Function module is called automatiquely: COND_B_DISPLAY_DOCUMENT
THEN SUBMIT RSSCD100
THEN The function module is called with the no parameter READ_CHANGEDOCU (ie with space value)
THEN the program reads only from DB
Question : HOW I oblige the program to read from the archive (READ_CHANGEDOCU = 'X') ?
I checked these SAP notes 1050935,1299903, 1308024, 1128954, 1050335
but no results.
May be I forgot some customizing ( SARA,, AOBJ )?
Thanks for your help.

Hi,
As I understand, the change documents archived using the CHANGEDOCU archiving object are no longer available using the application object.
Refer to Notes 1257133 and 140255 where they mention the above point.
If you want to read change documents along with the application, then you must first archive the change documents along with the application.
In your case, for agreements, you should use object SD_AGREEM so that the change documents also gets archived along with the agreements. Refer to note 761281 to check whether the archiving class CHANGEDOCU is already defined along with object SD_AGREEM in your system.
Hope this helps,
Naveen

Display resolution changes during sleep

This does not look quite like anything I've seen here already. Mid-2010 Mac Mini, OS X 10.9.2, Acer V173 monitor with 1280 x 1024 maximum resolution, connected via Apple Mini DisplayPort to VGA adapter (because the monitor has only a VGA input). Resolution is set at 1280 x 1024. I have Display Menu installed and the icon sits at the top in the menu bar.
Display goes to sleep when there is no user activity for a few minutes (because although the display doesn't use much power it's still against my nature to waste any). I wake it up by hitting a non-printing key such as control, option, command, or all three together. Often as not, the display wakes up in a lower resolution. I can usually restore it to 1280 x 1024 by using Display Menu, but then I also have to resize some of the windows that have been shrunk by the lower resolution.
I don't want the display resolution to change. I tried resetting NVRAM and repairing file permissions, no help.
Why does the display resolution change without my knowledge and consent? More to the point, how can I keep it from doing that?

Another helpful hint, again I forget where on this discussion board I saw it, is that holding down the Option key while hitting the Scaled button in Display Preferences gives a wider choice of resolutions. Ordinarily the only resolution option is 1280x1024, but the Option key brings up others, including 1280x960.
On the theory that Apple doesn't like the 5:4 aspect ratio of the native 1280x1024 resolution of the monitor, I set the monitor resolution to 1280x960 yesterday (June 23). There's a little distortion from using a 4:3 aspect ratio on a physically 5:4 monitor, but if two weeks go by (July 7) without the resolution going bad, I will try a new (or used) monitor.
The next question is, would Apple dislike a wide screen aspect ratio? If it likes 16:9, would it dislike 16:10? With my hardware and OS, and a 1080p HDTV/monitor connected with an HDMI cable, would the resolution stay put?

Change Docs & VB02 Condition Types

Does anyone know of a way to enable change docs on VB02 condition records?? I see this is easily done via BADI's & ES on the VK** tcodes/Progs, but I have been unsuccessful at finding anything that ties to VB02 Listing/Exclusion condition types.
Regards,
Brad
Edited by: Brad Coggins on Jan 28, 2011 9:15 PM

Go to TCode: SE84 => Enhancements => Business Add-inns => Definition
Enter the Package Name (for vb02, it is VK0N) and Execute.
Here you get a list of all the Enhancement BADIs for the given package
thanks
G. Lakshmipathi

Display of change docs in CUA

Similar Messages

Maybe you are looking for