Display Output on the Selection-screen

Hi all ! Could anybody tell me to how to display the name of the vendor/customer next to the input box on the selection screen area ? e.g. As soon as one presses the enter key after entering the vendor code on 'XK03' transaction screen, the name of the respective vendor is shown right next to the vendor code input box on the selection screen area.

Hi,
In AT-selection screen event write the code for getting the the Customer/vendor Name and display it on the screen.
In-order for the Radiobutton selection process to initiate the 'AT selection-screen' event you need to add the 'USER_COMMAND' option to the parameter declaration. See code below.
*Code used to Initiate the 'AT selection-screen' EVENT from radiobuttons.
selection-screen begin of block group with frame title text-s04.
parameters: p_sel1 type c radiobutton group sel user-command upd.
parameters: p_sel2 type c radiobutton group sel.
parameters: p_sel3 type c radiobutton group sel.
selection-screen end of block group.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD1.
IF p_sel1 = 'X'.
Write select query to get teh customer/vendor name and display it.
ENDIF.
You can use LFA1 or KNA1 to get vendor/customer name

Similar Messages

Related to Displaying picture on the selection screen

Hi ,
I had a requirement where i had to display a picture on the selection screen, so i used the methods set_position and load_picture_from_url of the class cl_gui_picture to archive this, but now my selection screen has extended to more than one page because of this if i scroll down on the selection screen the picture is not scrolling it is remaining static to the screen ( i.e. if i place it (10, 10) after scrolling also it is still remaining at (10 , 10) with respect to the new screen) is there any way i can scoll the picture also i.e. it also moves up along with the screen?

There could be one option : create one screen and load your picture on that screen.
Within your selection screen, call the screen created above.

Display key in the selection screen and Key & Text in the report

Hi,
For the infoobject in the query,
In the variable selection screen When i want to select any value it should display only key, and in the report i want to display key and text of that infoobject.
Is it possible?
Thanks
Rani

Hi
Display As
Here you determine whether and in what format the individual characteristic values of the characteristic are presented:
·        (Standard): The standard display type for characteristic values corresponds to the setting in InfoObject maintenance under Tab Page: Business Explorer.
·        No Display: The characteristic display is hidden. This function is useful, for example, with the currency/unit characteristic as the currencies are also shown in the key figures.
·        Key and Text: The characteristic values are displayed by their technical key and text.
·        Text: The characteristic values are displayed by their text.
·        Key: The characteristic values are displayed by their technical key.
·        Text and Key: The characteristic values are displayed by their text and technical key.
In the dropdown box below, you can select the type of text you want to use if you set a display type that contains text. The following options are available:
·        Standard: The shortest available text for the characteristic values is used as the text.
·        Short text: The short text for the characteristic values is used as the text.
·        Long text: The long text for the characteristic values is used as the text.
·        Medium text: The medium text for the characteristic values is used as the text.

How can i display output in the same selection screen?

I've a requirement. Suppose in my selection screen there are three input fields. On the basis of this selection screens input It will display the output in the same selection screen. Can it be possible? .
Can it be possible to modify the default screen no for the selection screen 1000?
Thanks in advance.
Abhijit

Hi Abijit,
Whatever changes made in STANDARD SELECETION SCREEN 1000 or screens generated using 'SELECTION-SCREEN' statements, are not permanent.
It will get back to its original appearance, while you execute again or some time later.
Whenever you get into 'CHANGE' mode of these screens, an information will be displayed as follows ;
Selection screen: Report generation makes screen
changes ineffective
Regards,
R.Nagarajan.

To display the selection screen variant name in WAD report output.

Hello experts,
I have a requirement which is to display the selection screen variant description in the output of the WAD report.
I managed halfway, by using the object "Information field", which displays all the values which are selected by the variant.
Example:I have created a cost center report created using WAD, since I need some graphical displays..
In the selection screen, I have the characteristic "cost center" as input field. I have created a variant " GM - IT" which will include few cost centers managed by GM. In the output, I want the dispaly to be "Cost center - GM IT". Currently it displays "Cost Center - a,b,c,d" as the values a,b,c,d are the values from the variant name "GM-IT"
Please let me know if this required any java script. I am not familiar with java / html codes and any help would be much appreciated (and rewarded)
Thanks in advance
KS

Hi,
Try this.
If you want to include your variables in your WAD means you have to choose "Force Variable Screen" option to be in enabled condition.
TO enable this,in WAD select your Template(New Template1) click the WEBITEM , it'll shows all generic properties , here you can enable this "Force variable screen"
Save and execute your WAD now you can get your variable screen.
Thanks,
JituK

How to Display my Form in the selection screen.(without print format)

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Prasad,
Pls refer the below link.
<< Moderator message - Point begging removed >>
http://wiki.sdn.sap.com/wiki/display/Snippets/Displayimagesontheselection-screen
Thanks
Arjun
Edited by: Rob Burbank on Aug 17, 2011 2:24 PM

How to display the dynamic text in the selection screen

Hi All,
I want to display the dynamic text in the selection screen .... ( I searched in forums , didnt get the any answer fot this sort of qustion ).....
EX: If i have the date of today 31st it has to show message like " today date is 31 like some thing " when i execute the report .
Could any one face this sort of requirment, Please let me know.
Thanks in advance.
Reagrds,
Bharani

Where would you like this dynamic text being displayed? As an "message" or in some parameter field?
If first
parameters date type d.
data: text type string.
at selection-screen.
   concatenate 'Today is' date into text.
   message text type 'I'.
If second
parameters pa_text type c length 50.
at selection-screen on date.
if date is not initial.
    concatenate 'Today is' date into pa_text.
enidf.
at selection-screen output.
   "show it as read only
   loop at screen.
    if screen-name = 'PA_TEXT'.
           screen-input = abap_false.
          modify screen.
    endif.
   endloop.
Regards
Marcin

Report OutPut directly to the printer by selecting in the selection screen

Hi Guys,
Can any one help,
How to give Report output (ALV report ) directly to the printer by selecting the printer name in the selection screen .
Sap Version is ECC 6.0.
Thanks In advance
praveen k

hi,
u can do it using submit statement.
SUBMIT TO SAP-SPOOL
Basic form
SUBMIT rep ... TO SAP-SPOOL.
Extras:
1.... DESTINATION dest         ... COPIES cop
        ... LIST NAME name
        ... LIST DATASET dsn
        ... COVER TEXT text
        ... LIST AUTHORITY auth
        ... IMMEDIATELY flag
        ... KEEP IN SPOOL flag
        ... NEW LIST IDENTIFICATION flag
        ... DATASET EXPIRATION days
        ... LINE-COUNT lin
        ... LINE-SIZE col
        ... LAYOUT layout
        ... SAP COVER PAGE mode
        ... COVER PAGE flag
        ... RECEIVER rec
        ... DEPARTMENT dep
        ... ARCHIVE MODE armode
        ... ARCHIVE PARAMETERS arparams
        ... WITHOUT SPOOL DYNPRO
2. ... SPOOL PARAMETERS params
         ... ARCHIVE PARAMETERS arparams
         ... WITHOUT SPOOL DYNPRO
3. ... Further parameters (for passing variants)
        are described in the documentation for SUBMIT
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Missing print parameters with SUBMIT.
Effect
Calls the report rep with list output to the SAP spool database.
Additions
... DESTINATION dest(output device)
... COPIES cop(number of copies)
... LIST NAME name(name of list)
... LIST DATASET dsn(name of spool dataset)
... COVER TEXT text(title of spool request)
... LIST AUTHORITY auth(authorization for display)
... IMMEDIATELY flag(print immediately ?)
... KEEP IN SPOOL flag(keep list after print ?)
... NEW LIST IDENTIFICATION flag(new spool request ?)
... DATASET EXPIRATION days(number of days list
retained)
... LINE-COUNT lin ( lin lines per page)
... LINE-SIZE col(col columns per line)
... LAYOUT layout(print format)
... SAP COVER PAGE mode(SAP cover sheet ?)
... COVER PAGE flag(selection cover sheet ?)
... RECEIVER rec(SAP user name of
recipient)
... DEPARTMENT dep(name of department)
... ARCHIVE MODE armode(archiving mode)
... ARCHIVE PARAMETERS arparams(structure with archiving
parameters)
... WITHOUT SPOOL DYNPRO(skip print control screen)
With the parameters IMMEDIATELY, KEEP IN SPOOL, NEW LIST IDENTIFICATION and COVER TEXT, flag must be a literal or character field with the length 1. If flag is blank, the parameter is switched off, but any other character switches the parameter on. You can also omit any of the sub-options of PRINT ON. mode with SAP COVER PAGE can accept the values ' ', 'X' and 'D'. These values have the following meaning:
' ' : Do not output cover sheet
'X' : Output cover sheet
'D' : Cover sheet output according to printer setting
armode with ARCHIVE MODE can accept the values '1', '2' and '3'. These values have the following meaning:
'1' : Print only
'2' : Archive only
'3' : Print and archive
arparams with ARCHIVE PARAMETERS must have the same structure as ARC_PARAMS. This parameter should only be processed with the function module GET_PRINT_PARAMETERS.
Effect
Output is to the SAP spool database with the specified parameters. If you omit one of the parameters, the system uses a default value. Before output to the spool, you normally see a screen where you can enter and/or modify the spool parameters. However, you can suppress this screen with the following statement:
... TO SAP-SPOOL WITHOUT SPOOL DYNPRO
You could use this option if all the spool parameters have already been set!
reward points if hlpful.
Note
When specifying the LINE-SIZE, you should not give any value > 132 because most printers cannot print wider lists.
Addition 2
... SPOOL PARAMETERS params(structure with print
parameters)
... ARCHIVE PARAMETERS arparams(Structure with archive
parameters)
... WITHOUT SPOOL DYNPRO(skip print parameters
screen)
Effect
Output is to the SAP spool database with the specified parameters. The print parameters are passed by the field string params which must have the structure of PRI_PARAMS. The field string can be filled and modified with the function module GET_PRINT_PARAMETERS. The specification arparams with ARCHIVE PARAMETERS must have the structure of ARC_PARAMS. This parameter should only be processed with the function module GET_PRINT_PARAMETERS. Before output to the spool, you normally see a screen where you can enter and/or modify the spool parameters. However, you can suppress this screen with the following statement:
... WITHOUT SPOOL DYNPRO
Example
Without archiving
DATA: PARAMS LIKE PRI_PARAMS,
      DAYS(1) TYPE N VALUE 2,
      COUNT(3) TYPE N VALUE 1,
      VALID    TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION           = 'LT50'
            COPIES                = COUNT
            LIST_NAME             = 'TEST'
            LIST_TEXT             = 'SUBMIT ... TO SAP-SPOOL'
            IMMEDIATELY           = 'X'
            RELEASE               = 'X'
            NEW_LIST_ID           = 'X'
            EXPIRATION            = DAYS
            LINE_SIZE             = 79
            LINE_COUNT            = 23
            LAYOUT                = 'X_PAPER'
            SAP_COVER_PAGE        = 'X'
            COVER_PAGE            = 'X'
            RECEIVER              = 'SAP*'
            DEPARTMENT            = 'System'
            NO_DIALOG             = ' '
IMPORTING OUT_PARAMETERS        = PARAMS
            VALID                 = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.
Example
With archiving
DATA: PARAMS   LIKE PRI_PARAMS,
      ARPARAMS LIKE ARC_PARAMS,
      DAYS(1) TYPE N VALUE 2,
      COUNT(3) TYPE N VALUE 1,
      VALID    TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION            = 'LT50'
            COPIES                 = COUNT
            LIST_NAME              = 'TEST'
            LIST_TEXT              = 'SUBMIT ... TO SAP-SPOOL'
            IMMEDIATELY            = 'X'
            RELEASE                = 'X'
            NEW_LIST_ID            = 'X'
            EXPIRATION             = DAYS
            LINE_SIZE              = 79
            LINE_COUNT             = 23
            LAYOUT                 = 'X_PAPER'
            SAP_COVER_PAGE         = 'X'
            COVER_PAGE             = 'X'
            RECEIVER               = 'SAP*'
            DEPARTMENT             = 'System'
            SAP_OBJECT             = 'RS'
            AR_OBJECT              = 'TEST'
            ARCHIVE_ID             = 'XX'
            ARCHIVE_INFO           = 'III'
            ARCHIVE_TEXT           = 'Description'
            NO_DIALOG              = ' '
IMPORTING OUT_PARAMETERS         = PARAMS
            OUT_ARCHIVE_PARAMETERS = ARPARAMS
            VALID                  = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    ARCHIVE PARAMETERS ARPARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How can we display below mention control in the selection screen

I want to display a container in the selection screen. (the container which we can use/get in the alv out put when we select a ascending/decending sort buttons for filtering of sort order).
thanks in advance.
sree

simply at selection-screen output. event do the following coding.
1. create a docking container
2. create you control on to the container.
create object docking
exporting
repid = repid
<b>dynnr = sy-dynnr</b> side = cl_gui_docking_container=>dock_at_right
extension = '200'
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
if editor is initial.
create object editor exporting parent = docking
                                 wordwrap_mode =
                     cl_gui_textedit=>wordwrap_at_fixed_position
                                 wordwrap_position = 256
                                 max_number_chars = 100000.
endif .
Regards
Raja

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to get rid of the loop in ALV output from At selection screen event?

I have several push buttons on a selection screen.
Clikc on a button, then it pops up an editable ALV report. (This gets triggered AT SELECTION SCREEN event.). REUSE_ALV_GRID_DISPLAY_LVC..
On the ALV output, I enabled F4 for a couple of fields. Once I click on the F4 button, ONF4 method gets triggerd and a pop up appears with custom search helps.
choose a line and it fills the cell.
Upto this it works fine.
Now I click on the BACK button at the ALV output, it takes me to the selection screen. I click on the button again, it show the editable ALV. Now when I click on the F4 button, the pop up comes up twice and the cell gets filled from the second pop - up.
How to control this?
Probably I am not refreshing something?
(I am using REUSE_ALV_GRID_DISPLAY_LVC and tooks ome code for ONF4 event from BCALV_*DATATYPES (forgot the exact name) program.)
Thanks,
Ven

Hi,
FORM refresh_grid USING pw_grid TYPE REF TO cl_gui_alv_grid.
*Work area
DATA : wal_stable TYPE lvc_s_stbl.
CHECK NOT pw_grid IS INITIAL.
wal_stable-col = c_check.
wal_stable-row = c_check.
*Method to refresh grid
CALL METHOD pw_grid->refresh_table_display
       EXPORTING
         is_stable      = wal_stable
         i_soft_refresh = c_check
       EXCEPTIONS
         finished       = 1
         OTHERS         = 2.
ENDFORM.                    " refresh_grid
Thanks,
Sree.

How to display data from internal table in the SELECTION-SCREEN

Hello Experts,
My requirement is to display the data's from an internal table in the selection screen. I tried using selection-screen comment. But it is working only for a single record. Can anyone please tell me how to do this?

Hi Ritika,
we cant use write statement inside selection-screen.
see my coding.
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
                                      NO INTERVALS.
    SELECT-OPTIONS SEL1 FOR SY-DATUM.
    PARAMETERS     PAR1(10).
<b>** I WANT ALL RECORDS FROM AN INTERNAL TABLE HERE ONLY</b>
    SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN PUSHBUTTON 2(10) but1 USER-COMMAND cli1.
SELECTION-SCREEN PUSHBUTTON 20(10) but2 USER-COMMAND cli2.
SELECTION-SCREEN END OF SCREEN 123.

Display "without PGI" & "PGI done not invoiced" in the selection screen

Hi All,
I am preparing a query to track the status of outbound deliveries and would greatly appreciate it if you could guide me on the following requirement.
Is there a way to display the following two fields in the "Selection Screen" of a query (TCode: SQ00).
1. Without PGI (Delivery document saved but the delivery is yet to do a PGI).
2. PGI done but not invoiced (PGI is done but the invoice is not raised).
I have already added, joined LIKP and LIPS and retrieving a host of information from these two tables but stuck on the two points above.
Thanks in advance.

SAP SD_Newbie wrote:
> The user wants these fields in the "Selection Screen" of the query (SQ00).
>
> 1. Without PGI (Delivery document saved but the delivery is yet to do a PGI).
> 2. PGI done but not invoiced (PGI is done but the invoice is not raised).
>
> Importantly, I am a bit reluctant to use any other table apart from LIKP and LIPS (I tried joining other tables but the performance was drastically slow because of too many inner / left outer joins).
I do agree that standard transactions should be considered instead. The users always want the darndest things...
Query is not a custom report and has some limitations, which needs to be understood by the users. We can't add such buttons/checkboxes on the screen in a query, but we can add the status fields as selection criteria.
Since query is at the line item level (LIPS), the statuses also are needed at the line item level, which is VBUP table. WBSTA is GM status, FKSTA is billing status. I'd guess that if WBSTA is 'A' then it's not PGIed and if FKSTA is 'A' then it's not invoiced. But I'd check in your system to make sure the statuses are updated as expected.
VBUP can be joined by primary key, so it shouldn't have a huge negative effect on performance. In any case, this is the only way to deliver such information in a query, I believe.

Displaying Plant as F4 option in the selection screen according to the User Authorization

Hi all,
In the selection screen, I need to display the list of plants as F4 search help that the user has authorization.
How I need to check from the table.
Please provide me the exact table name where I can get the list of plants that the user has authorization.
Thanks in Advance.
Regards,
karthik

Hi Madan,
Thanks for your reply.
As of now Plant entered in selection screen is validated for authorization like below.
authority-check object 'M_MATE_WRK'
      id 'ACTVT' field '02'
      id 'WERKS' field p_werks.
   if sy-subrc <> 0.
     message text-010 type c_e.
     exit.
   endif.
But they are in need of Plants in F4.
Regards,
Karthik

Display Output on the Selection-screen

Similar Messages

Maybe you are looking for