Related to Displaying picture on the selection screen

Hi ,
I had a requirement where i had to display a picture on the selection screen, so i used the methods set_position and load_picture_from_url of the class cl_gui_picture to archive this, but now my selection screen has extended to more than one page because of this if i scroll down on the selection screen the picture is not scrolling it is remaining static to the screen ( i.e. if i place it (10, 10) after scrolling also it is still remaining at (10 , 10) with respect to the new screen) is there any way i can scoll the picture also i.e. it also moves up along with the screen?

There could be one option : create one screen and load your picture on that screen.
Within your selection screen, call the screen created above.

Similar Messages

Display Output on the Selection-screen

Hi all ! Could anybody tell me to how to display the name of the vendor/customer next to the input box on the selection screen area ? e.g. As soon as one presses the enter key after entering the vendor code on 'XK03' transaction screen, the name of the respective vendor is shown right next to the vendor code input box on the selection screen area.

Hi,
In AT-selection screen event write the code for getting the the Customer/vendor Name and display it on the screen.
In-order for the Radiobutton selection process to initiate the 'AT selection-screen' event you need to add the 'USER_COMMAND' option to the parameter declaration. See code below.
*Code used to Initiate the 'AT selection-screen' EVENT from radiobuttons.
selection-screen begin of block group with frame title text-s04.
parameters: p_sel1 type c radiobutton group sel user-command upd.
parameters: p_sel2 type c radiobutton group sel.
parameters: p_sel3 type c radiobutton group sel.
selection-screen end of block group.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD1.
IF p_sel1 = 'X'.
Write select query to get teh customer/vendor name and display it.
ENDIF.
You can use LFA1 or KNA1 to get vendor/customer name

Display key in the selection screen and Key & Text in the report

Hi,
For the infoobject in the query,
In the variable selection screen When i want to select any value it should display only key, and in the report i want to display key and text of that infoobject.
Is it possible?
Thanks
Rani

Hi
Display As
Here you determine whether and in what format the individual characteristic values of the characteristic are presented:
·        (Standard): The standard display type for characteristic values corresponds to the setting in InfoObject maintenance under Tab Page: Business Explorer.
·        No Display: The characteristic display is hidden. This function is useful, for example, with the currency/unit characteristic as the currencies are also shown in the key figures.
·        Key and Text: The characteristic values are displayed by their technical key and text.
·        Text: The characteristic values are displayed by their text.
·        Key: The characteristic values are displayed by their technical key.
·        Text and Key: The characteristic values are displayed by their text and technical key.
In the dropdown box below, you can select the type of text you want to use if you set a display type that contains text. The following options are available:
·        Standard: The shortest available text for the characteristic values is used as the text.
·        Short text: The short text for the characteristic values is used as the text.
·        Long text: The long text for the characteristic values is used as the text.
·        Medium text: The medium text for the characteristic values is used as the text.

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to Display my Form in the selection screen.(without print format)

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Prasad,
Pls refer the below link.
<< Moderator message - Point begging removed >>
http://wiki.sdn.sap.com/wiki/display/Snippets/Displayimagesontheselection-screen
Thanks
Arjun
Edited by: Rob Burbank on Aug 17, 2011 2:24 PM

How to display data from internal table in the SELECTION-SCREEN

Hello Experts,
My requirement is to display the data's from an internal table in the selection screen. I tried using selection-screen comment. But it is working only for a single record. Can anyone please tell me how to do this?

Hi Ritika,
we cant use write statement inside selection-screen.
see my coding.
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
                                      NO INTERVALS.
    SELECT-OPTIONS SEL1 FOR SY-DATUM.
    PARAMETERS     PAR1(10).
<b>** I WANT ALL RECORDS FROM AN INTERNAL TABLE HERE ONLY</b>
    SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN PUSHBUTTON 2(10) but1 USER-COMMAND cli1.
SELECTION-SCREEN PUSHBUTTON 20(10) but2 USER-COMMAND cli2.
SELECTION-SCREEN END OF SCREEN 123.

To display the selection screen variant name in WAD report output.

Hello experts,
I have a requirement which is to display the selection screen variant description in the output of the WAD report.
I managed halfway, by using the object "Information field", which displays all the values which are selected by the variant.
Example:I have created a cost center report created using WAD, since I need some graphical displays..
In the selection screen, I have the characteristic "cost center" as input field. I have created a variant " GM - IT" which will include few cost centers managed by GM. In the output, I want the dispaly to be "Cost center - GM IT". Currently it displays "Cost Center - a,b,c,d" as the values a,b,c,d are the values from the variant name "GM-IT"
Please let me know if this required any java script. I am not familiar with java / html codes and any help would be much appreciated (and rewarded)
Thanks in advance
KS

Hi,
Try this.
If you want to include your variables in your WAD means you have to choose "Force Variable Screen" option to be in enabled condition.
TO enable this,in WAD select your Template(New Template1) click the WEBITEM , it'll shows all generic properties , here you can enable this "Force variable screen"
Save and execute your WAD now you can get your variable screen.
Thanks,
JituK

How to display the dynamic text in the selection screen

Hi All,
I want to display the dynamic text in the selection screen .... ( I searched in forums , didnt get the any answer fot this sort of qustion ).....
EX: If i have the date of today 31st it has to show message like " today date is 31 like some thing " when i execute the report .
Could any one face this sort of requirment, Please let me know.
Thanks in advance.
Reagrds,
Bharani

Where would you like this dynamic text being displayed? As an "message" or in some parameter field?
If first
parameters date type d.
data: text type string.
at selection-screen.
   concatenate 'Today is' date into text.
   message text type 'I'.
If second
parameters pa_text type c length 50.
at selection-screen on date.
if date is not initial.
    concatenate 'Today is' date into pa_text.
enidf.
at selection-screen output.
   "show it as read only
   loop at screen.
    if screen-name = 'PA_TEXT'.
           screen-input = abap_false.
          modify screen.
    endif.
   endloop.
Regards
Marcin

Display "without PGI" & "PGI done not invoiced" in the selection screen

Hi All,
I am preparing a query to track the status of outbound deliveries and would greatly appreciate it if you could guide me on the following requirement.
Is there a way to display the following two fields in the "Selection Screen" of a query (TCode: SQ00).
1. Without PGI (Delivery document saved but the delivery is yet to do a PGI).
2. PGI done but not invoiced (PGI is done but the invoice is not raised).
I have already added, joined LIKP and LIPS and retrieving a host of information from these two tables but stuck on the two points above.
Thanks in advance.

SAP SD_Newbie wrote:
> The user wants these fields in the "Selection Screen" of the query (SQ00).
>
> 1. Without PGI (Delivery document saved but the delivery is yet to do a PGI).
> 2. PGI done but not invoiced (PGI is done but the invoice is not raised).
>
> Importantly, I am a bit reluctant to use any other table apart from LIKP and LIPS (I tried joining other tables but the performance was drastically slow because of too many inner / left outer joins).
I do agree that standard transactions should be considered instead. The users always want the darndest things...
Query is not a custom report and has some limitations, which needs to be understood by the users. We can't add such buttons/checkboxes on the screen in a query, but we can add the status fields as selection criteria.
Since query is at the line item level (LIPS), the statuses also are needed at the line item level, which is VBUP table. WBSTA is GM status, FKSTA is billing status. I'd guess that if WBSTA is 'A' then it's not PGIed and if FKSTA is 'A' then it's not invoiced. But I'd check in your system to make sure the statuses are updated as expected.
VBUP can be joined by primary key, so it shouldn't have a huge negative effect on performance. In any case, this is the only way to deliver such information in a query, I believe.

Displaying Plant as F4 option in the selection screen according to the User Authorization

Hi all,
In the selection screen, I need to display the list of plants as F4 search help that the user has authorization.
How I need to check from the table.
Please provide me the exact table name where I can get the list of plants that the user has authorization.
Thanks in Advance.
Regards,
karthik

Hi Madan,
Thanks for your reply.
As of now Plant entered in selection screen is validated for authorization like below.
authority-check object 'M_MATE_WRK'
      id 'ACTVT' field '02'
      id 'WERKS' field p_werks.
   if sy-subrc <> 0.
     message text-010 type c_e.
     exit.
   endif.
But they are in need of Plants in F4.
Regards,
Karthik

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

How can we display below mention control in the selection screen

I want to display a container in the selection screen. (the container which we can use/get in the alv out put when we select a ascending/decending sort buttons for filtering of sort order).
thanks in advance.
sree

simply at selection-screen output. event do the following coding.
1. create a docking container
2. create you control on to the container.
create object docking
exporting
repid = repid
<b>dynnr = sy-dynnr</b> side = cl_gui_docking_container=>dock_at_right
extension = '200'
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
if editor is initial.
create object editor exporting parent = docking
                                 wordwrap_mode =
                     cl_gui_textedit=>wordwrap_at_fixed_position
                                 wordwrap_position = 256
                                 max_number_chars = 100000.
endif .
Regards
Raja

Display alv grids in selection screen based on the user event

Hi All,
I am workign on displaying ALV in same selection screen.I am able to display the ALV in selection screen.
But i have 2 buttons in my selection screen 'Create' and 'change'.
When i click on create i need with some type of data and when i click on 'change' my alv grid another type of data.Ex: if i click on crate mara data should be dispalyed when i click on change makt table data should be dispalyed and also i have user defined buttons are in my grids.
So i have used 2 containers to dispaly to different data.I am able to display the perfectly but the problem is first time when i click on create the grid is displaying when i click on change button the create alv grid is displaying down and change data is dispalying up.
I need only one alv grid at a time.Can anybody please let me know how can i do this.
Thanks,
Taragini

Hello,
Also I would suggest if it is relevant data maintain in one interntal table and show/hide based on condition
through fieldcatalog (NO_OUT) parameter.
Thanks

Displaying Variables values with Text also in the selection screen of repor

hai
I have one InfoObject ZPLANT .When i try to excute the report then im getting only the Values of ZPLANT(not Text of those values) .Like below
ZPLANT :-
101 -
(im getting like this)
101 London Plant ( i want like this ,when i try to excute the report).
Please tell me how to do .
rizwan

Yes kamaljeet ,
When we press F4 , then we will gwt some values .
I want those values with description also ..
Pls tell me how can i get those F4 values with text in the selection screen of report .
i ll assing the points
rizwan

Related to Displaying picture on the selection screen

Similar Messages

Maybe you are looking for