Display tasks for activities created in Win CIC

Hi! Currently the CIC is showing the transactions under Interaction Info tab. However, we have 2 issues here:
1. Tasks are not shown.
2. Tasks created under activities are not shown. I can see the activities but not the tasks.
I notice that under the Find field, tasks is not included in the list. Is this standard?
Is there anyway to configure and shown the above (either way)?
For 1, I think may be we can create a FM with our own logic to extract the tasks on top of activites, etc and assign to the 'Define Search in Locator' config?
Appreciate any help on the above!
Thanks!
SF

No solution

Similar Messages

How to install display driver for Satellite A running Win XP?

I recently got rid of Vista from my Satellite laptop and had XP installed.
I need to install the display driver (For ATI Radeon Video Card) which I had to download from this site.
How do I install the driver?
When I go to reinstall the driver the system can not find it.
What am I doing wrong or what do I need to run first?
There are so many files I am not sure..I tried running set-up but that did not help.
Thanks

you didn't show your model part, that's why I post all known me toshiba driver pages:
[European Toshiba Driver Page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
[Canadian Toshiba Driver Page|http://support.toshiba.ca/support/Download/ln_byModel.asp]
[Australian Toshiba Driver Page|http://www.mytoshiba.com.au/support]
[American Toshiba Driver Page|http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp]
I can't believe that you can't install it give more details, pls

Unable to create a subtask within a task for cProjects

Hi All,
I am unable to create a subtask within a task using BAPI_BUS2175_CREATE. When I pass the GUID of the project definition and fill the corresponding task structures to the BAPI, a task gets created at the phase level. But when I pass the GUID of the task along with the task
information, subtask does not get created. The BAPI returns the following error message:
DPR_SHARED 051: You cannot create Task for (Task Name).
Steps for recreating the error message are:
1. GUID is found out using function module CONVERSION_EXIT_DPRCE_INPUT.
2. GUID and task information is passed to BAPI_BUS2175_CREATE.
3. Task is created if project definition GUID is passed, but if task GUID is passed, there is no subtask created. An error message is displayed:
DPR_SHARED 051: You cannot create Task for (Task Name).
Any help would be appreciated.
Thanks,
Tom

Hi all,
I have used the same and it works absolutely fine.
here is a code sample
CONSTANTS:
   lc_rfc_none        TYPE string VALUE 'NONE'.       " RFC on same server
DATA:
lv_header_task_guid TYPE bapi_ts_guid-parent_guid, " Header Task GUID
ls_sub_task TYPE bapi_ts_task,
ls_sub_task_upd TYPE bapi_ts_task_upd,
lt_crtask_return TYPE TABLE OF bapiret2,
ls_extension_in TYPE bapiparex,
ls_extension_out TYPE bapiparex,
lv_task_guid TYPE bapi_ts_guid-parent_guid. " Task GUID
* Assign sub-task name. (Task Number is internally generated)
ls_sub_task-task_name = 'ST 1.1'.
ls_sub_task_upd-task_name = 'X'.
* Assign Sort Number
ls_sub_task-sort_number = '00010'.
ls_sub_task_upd-sort_number = 'X'.
* Assign Duration
ls_sub_task-duration = 30.
ls_sub_task_upd-duration = 'X'.
* Assign Work.
ls_sub_task-planned_work = 240.
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_INPUT'
EXPORTING
    input          = 'H'
IMPORTING
    output         = ls_sub_task-planned_work_unit
EXCEPTIONS
    unit_not_found = 1
    OTHERS         = 2.
IF sy-subrc <> 0.
ENDIF.
ls_sub_task_upd-planned_work = 'X'.
ls_sub_task_upd-planned_work_unit = 'X'.
CALL FUNCTION 'BAPI_BUS2175_CREATE'
     DESTINATION lc_rfc_none
     EXPORTING
         iv_parent_guid   = lv_header_task_guid
         is_task          = ls_sub_task
         is_task_upd      = ls_sub_task_upd
         is_extension_in = ls_extension_in
      IMPORTING
         es_extension_out = ls_extension_out
     TABLES
         return           = lt_crtask_return.
* If task is successfully created,
READ TABLE lt_crtask_return WITH KEY type = lc_success number = '114'.
IF sy-subrc = 0.
* Get task GUID
lv_task_guid = lt_crtask_return-message_v1.
CALL FUNCTION 'BAPI_CPROJECTS_COMMIT_WORK'
DESTINATION
    lc_rfc_none
TABLES
    return = lt_bapiret2.
endif.
In order to find the GUID of the header task use function module:
DPR_GET_GUID_BY_ID_FROM_DB
with IV_Number = task number for the header task and IV_OBJECT_TYPE = TTO
Read the documentation for 'BAPI_BUS2175_CREATE' before using it.
make sure you have maintained IS_TASK_UPDATE structure as well.
Regards,
Reema.

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Tecra S5 - no display support for 1680x1050 in Win XP

Hello,
I have a Tecra S5 with NVIDIA Quadro NVS 130M, 512MB. The driver version is 6.14.11.5692.
And en external monitor Samsung SyncMaster 2232BW.
Using Win Vista as OS, I can set the resolution 1680x1050 to the external monitor.
But I switch on Win XP and now I don't have the option of choosing the resolution 1680x1050 to the Samsung monitor.
Can you help me on this?

Have you installed the newest display driver for Windows XP?
On the Toshiba website version 6.14.11.5692 for Windows XP is the newest (same as Vista).
http://eu.computers.toshiba-europe.com
Is the external monitor recognized as Plug & Play monitor?
You can also test drivers from the manufacture. There is a driver available for Windows XP.

Create Multiple tasks for Single Item in List using state machine workflow in sharepoint

Hi,
I want to create multiple create tasks for Single Item in List based on Assigned to column using state machine Workflow through visual studio
Here Assigned to column allows multiple users. so i have to create task for every user based on column .
I'm trying for this but i didn't got any solution
Please provide solution for this.

Hi,
According to your post, my understanding is that you wanted to allow multiple users to approve.
There are some articles about creating parallel tasks in state machine workflow, you can have a look at them.
http://www.codeproject.com/Articles/477849/Create-Parallel-Task-in-State-Machine-Workflow-in
http://msdn.microsoft.com/en-us/library/office/hh128697(v=office.14).aspx
http://social.technet.microsoft.com/Forums/office/en-US/b16ee858-4360-479a-a686-4ee35b7be9db/sharepoint-2010-workflow-creating-multiple-tasks?forum=sharepointdevelopmentprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Activity Monitor: activites created before upgrade not displayed

Hi experts,
After upgrade from CRM4 to CRM7, the activity monitor (tcode S_AE2_89000019) is not working proprely. After several tests and analysis, we came to the conclusion that the logical database CRMLDB_ACT_MON used by the SAP Query of the Activity monitor is not fetching all results.
It seems that activities created after upgrade are well fetched. Old activities are not fetched
Has someone experimented the same problem?
Is there a specific action to perform on logical databases after upgrade?
Thanks in advance for your help

Hi Manfred,
Thanks for your answer. Unfortunately we haven't upgraded to Web UI yet..
I found the solution, I'm posting it just in case someone else is facing the same problem: CRMD_ORDER_INDEX is a table that consolidate orders data in order to make reports faster in CRM. This table is not updated after Upgrade, you need to run the program CRM_INDEX_REBUILD to have this table updated.
Many reports us this table. This report update data in new and obsolete tables as well (BUT021 and BUT021_FS)

Workflow creating task for user in Outlook

Is it possible to create a task in outlook for a specific user via workflow? My Boss want to have every user informed via mail that there is a new element in a list (that works fine) and one User should have a task (even better a complete to do list) in
his outlook task tab.

Hi Elite,
Based on your description, my understanding is that you want to create the tasks for users in Outlook with workflow.
I recommend to use workflow to create tasks in a task list in SharePoint and then sync the task list with outlook by clicking the button Connect to Outlook in the ribbon of the task list.
After that, the tasks created in the task list will be automatically synced to Outlook.
Please refer to the link below for detailed steps:
http://netizenapps.com/blog/?p=6
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Access Denied Error For Shared Folder with Win Server 2008R2 Task Manager Scheduled Task

Hi,
I have scheduled a Task with the Task scheduler. It invokes an .EXE file after every 5 min.
The application is supposed to access some files lying on a different Server's shared path, process them and move them across folders on the Shared path only.
Problem: When the .EXE gets executed from the Task scheduler, I am getting "Access Denied to the Shared path" error. I have already given Full Control to Everyone as well as to the Account with which the Task has been configured with.
Another important point to note is, if I run the .EXE manually, the solution is able is able to do everything intended; I don't get any Access Denied error.
Kindly help me with what needs to be done in order that this issue is resolved. This is really urgent for me.
Thanks a lot in advance..
AC

Hello Alex,
first of all, make sure your task was correctly create: How to Create Advanced Tasks with the Task
Scheduler.
Please, read these:
TechNet Library Task Security Context
TechNet Forums post How
does "Run with the highest privileges" really work in Task Scheduler ? - Look at the answer "...When you want to run a program with admin rights from a standard user account, you have to select "run whether the user is logged
on or not" and select a user which is member of the admingroup."
TechNet Forums post
Log on as batch job right (written on previous post)
serverfault Task Scheduler is not executing the program
serverfault
unable to schedule a task (access denied)
UAC: Do you receive the User Account Control "Windows need your permission to continue" message to approve the scheduled application ?
If yes, maybe "Run with highest privileges" option will not take precedence of the UAC. While the Admin Approval Mode for built-in Administrator account is enabled, UAC will still ask for approval according to the settings on the Behavior
of elevation to prompt for the administrators. Check whether the "User Account Control: Admin Approval Mode for built-in Administrator account" is enabled. If yes, disable it or change the setting on "User Account Control: Behavior
of elevation to prompt for the administrators" to elevate without prompting.
Local Computer Policy ---> Computer Configuration ---> Windows Settings ---> Security Settings ---> Local policies ---> Security Options (source: Task
Scheduler "run with highest privileges": does not work on Windows Server 2008 ?)
Bye,
Luca
Disclaimer: This posting is provided AS IS with no warranties or guarantees, and confers no rights. Whenever you see a helpful reply, click on [Vote As Help] and click on [Mark As Answer] if a post answers your question.

Create a Task, for use in "Deferred Task"

I am in the processing of creating Deferred Tasks for my Update-User workflow.
I know how to create these easily. My problem is : the actual "Task" itself, which will be called upon from the Workflow.
I don't know the proper syntax for it.
For instance, below is the code I am using for my "Send Email Task". This task is supposed to send an automatic email notification.
*<?xml version='1.0' encoding='UTF-8'?>*
*<!DOCTYPE TaskDefinition PUBLIC 'waveset.dtd' 'waveset.dtd'>*
**
*<TaskDefinition name='Send Email Task' creator='%STARTUP%Configurator' createDate='1247746928617' lastModifier='%STARTUP%Configurator' lastModDate='1247746928617' repoMod='1247746928170' primaryObjectClass='TaskDefinition' wstype='ProvisioningTask' taskType='Workflow' executor='com.waveset.workflow.WorkflowExecutor' syncControlAllowed='true' execMode='sync' execLimit='0' resultLimit='3600' resultOption='delete' visibility='invisible' progressInterval='0'>*
*<Extension>*
*<WFProcess maxSteps='0' audit='true'>*
*<Variable name='user' input='true'>*
*<Comments>
 A user view. This is required.
 </Comments>*
*</Variable>*
*<Variable name='backgroundProvisioning' input='true'>*
*</Variable>*
*<Variable name='provisioningRetryButton' value='true' input='true'>*
*<Comments>
 Set to "true" to enable the inclusion of a Retry link
 in the task result if the provisioning fails.
 </Comments>*
*</Variable>*
*<Variable name='approvals'>*
*<Comments>
 Returned from the Lighthouse Approval process. Contains the
 approval structure. The approvals.approved variable set if
 all approvals were successful. This is passed into the Notify
 process later for post-provisioning notifications.
 </Comments>*
*</Variable>*
*<Variable name='userCreated'>*
*<Comments>
 Set to "true" from the Provision workflow when the
 Lighthouse account has been created.
 </Comments>*
*</Variable>*
*<Variable name='sunset'>*
*<Comments>
 Object containing information for registering a sunset date/time.
 </Comments>*
*</Variable>*
*<Variable name='error'>*
*<Comments>Set in the event of unusual processing errors.</Comments>*
*</Variable>*
*<Variable name='options'>*
*<Comments>Options to pass to the provisioning task regarding resource
 provisioning.
 </Comments>*
*</Variable>*
*<Transition to='end'>*
*<Comments>
 Terminate if we encounter unusual errors (not provisioning errors).
 </Comments>*
*<ref>error</ref>*
*</Transition>*
*<Activity id='0' name='start'>*
*<Transition to='Notify'/>*
*</Activity>*
*<Activity id='1' name='Notify'>*
*<Action id='0' name='Email' application='com.waveset.provision.WorkflowServices'>*
*<Argument name='op' value='notify'/>*
*<Argument name='template' value='Send Email Now'/>*
*</Action>*
*<Transition to='End'/>*
*</Activity>*
*<Activity id='2' name='end'>*
*<WorkflowEditor x='428' y='275'/>*
*</Activity>*
*</WFProcess>*
*</Extension>*
*<MemberObjectGroups>*
*<ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>*
*</MemberObjectGroups>*
*</TaskDefinition>*
I am not sure if my syntax is correct?
Any tips?

Thanks again, sbalu.
I may have found the error (although, I don't understand what it means).
Something about *"Missing View"*
Catalog#format() Entry locale=null, key=SES_WORKITEM_MISSING_VIEW, defVal=SES_WORKITEM_MISSING_VIEW
20091126 08:28:22.701 TaskThread(0x0052fecf) Catalog#format() Info parameters=null
20091126 08:28:22.701 TaskThread(0x0052fecf) Catalog#format() Info tmp=null
20091126 08:28:22.701 TaskThread(0x0052fecf) Catalog#format() Info pattern=Missing view id.
20091126 08:28:22.701 TaskThread(0x0052fecf) Catalog#format() Info msg=Missing view id.
20091126 08:28:22.701 TaskThread(0x0052fecf) Catalog#format() Exit returned= Missing view id.
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#addTaskResult() Entry name=Send Email Task, ti=TaskInstance:Send Email Task tdalton
20091126 08:28:23.092 TaskThread(0x0052fecf) Catalog#format() Entry locale=null, key=SES_WORKITEM_MISSING_VIEW, defVal=SES_WORKITEM_MISSING_VIEW
20091126 08:28:23.092 TaskThread(0x0052fecf) Catalog#format() Info parameters=null
20091126 08:28:23.092 TaskThread(0x0052fecf) Catalog#format() Info tmp=null
20091126 08:28:23.092 TaskThread(0x0052fecf) Catalog#format() Info pattern=Missing view id.
20091126 08:28:23.092 TaskThread(0x0052fecf) Catalog#format() Info msg=Missing view id.
20091126 08:28:23.092 TaskThread(0x0052fecf) Catalog#format() Exit returned= Missing view id.
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#addTaskResult() Exit void
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#launchTask() Data executeOnce= false
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#launchTask() Exit returned= false
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#processTrigger() Exit returned= false
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#endObject() Entry no args
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#endObject() Exit void
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#processObject() Exit returned= false
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#processDeferredTasks() Data idOrName== #ID#6BF7-:B3702F65421:491FD113-:D0E4376B71977D1D
20091126 08:28:23.092 TaskThread(0x0052fecf) DeferredScanner#processDeferredTasks() Data nameOrId== ukaila
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processDeferredTasks() Data object lastMod= 24
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processObject() Entry obj=User:ukaila
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processObject() Data tasks= [ { accountId=ukaila, task=Send Email Task, name=Send Email Task, date=11/25/2009 11:15:00 } ]
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processObject() Data task list object= { accountId=ukaila, task=Send Email Task, name=Send Email Task, date=11/25/2009 11:15:00 }
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processTrigger() Entry obj=User:ukaila, trig={ accountId=ukaila, task=Send Email Task, name=Send Email Task, date=11/25/2009 11:15:00 }
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processTrigger() Data start= 11/25/09 11:15 AM
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processTrigger() Data _now= 11/26/09 8:28 AM
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processTrigger() Data task definition= CSC Send Email Task
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#startObject() Entry obj=User:ukaila
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#startObject() Entry type=User, nameOrId=ukaila
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#startObject() Exit void
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#startObject() Exit void
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processTrigger() Data task template= null
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processTrigger() Data task definition= TaskDefinition:Send Email Task
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#processTrigger() Data task template= TaskTemplate:null
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#launchTask() Entry obj=User:ukaila, trig={ accountId=ukaila, task=Send Email Task, name=Send Email Task, date=11/25/2009 11:15:00 }, tt=TaskTemplate:null
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#launchTask() Data taskName= null
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#launchTask() Data generated taskName= Send Email Task ukaila
20091126 08:28:23.123 TaskThread(0x0052fecf) TaskTemplate#setTaskName(String) Entry no args
20091126 08:28:23.123 TaskThread(0x0052fecf) TaskTemplate#setTaskName(String) Exit void
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#launchTask() Data orgName= null
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#launchTask() Data owner= null
20091126 08:28:23.123 TaskThread(0x0052fecf) DeferredScanner#launchTask() Data subjectLength= 29,650
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#create(Element) Entry element=[Map: null]
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Entry element=[Map: null]
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Info elname=Map
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Info classAtt=null
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Info classAtt=null
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Info regName=Map
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Exit returned= com.waveset.util.XmlObjectFactory$Registration@1edf84f
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#create(Element) Info handler=com.waveset.util.XmlHashMap@493dca
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#create(Element) Entry element=[Locale: null]
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Entry element=[Locale: null]
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Info elname=Locale
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Info classAtt=null
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Info classAtt=null
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Info regName=Locale
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#getConstructor() Exit returned= com.waveset.util.XmlObjectFactory$Registration@77a748
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#create(Element) Info handler=com.waveset.util.XmlLocale@1876e5d
20091126 08:28:23.123 TaskThread(0x0052fecf) XmlObjectFactory#create(Element) Exit returned= en_US

Ant tasks for creating ADF Library

Created an ADF declarative component, exported it as an ADF library and got it working fine. The ADF Library jar was created within JDeveloper by setting up a Deployment profile. The created ADF Library file has the TLD file and TagHandler / Component class files created on the fly and packaged.
Not sure of how We could get the same ADF library created by an Ant task. Are there Ant tasks for creating ADF library available? http://www.connotea.org/user/jdeveloper/tag/ant has some details on the JDeveloper based ant tasks but doesn't have details on creating ADF library.

You can use the ojdeply executable to create and deploy your ADF Library from the commandline:
<Jdev-install-location>/jdeveloper/jdev/bin/ojdeploy -workspace /mydirectory/yourworkspace.jws -profile yourprofile -project yourproject.jpr

Creating a Mass Task for an Account Hierarchy

Hi All,
I am trying to create a mass task for an Account Hierarchy in Web UI.
But what's happening is, the Task gets assigned only to the Activity Partner under the Parties Involved assignment block. It does not go to other Accounts pulled up in the Parties Involved assignment block by the Action mentioned in the Scheduled Actions assignment block.
My question is, why is the Task not getting assigned to all the Accounts in the account hierarchy for the Activity Partner?
Please suggest some solution.
Thanks,
Abhinav

I was able to do this through actions.

Actions creating task for multiple partner functions

Hello Masters,
Need help in below scenario.
We are using actions in quotations. Different actions gets triggered as per status of quotation.
ex: Status: manger approval request: Task to be create with action for manager
Status: Manger approved: Task to be created with action for Sales employee.
I have configured action profile. My actions are partner function dependent.
Partner functions are different for manager and sales employee.
But when action is getting triggered it is creating task for both partner functions.
How can I avoid this? Does though we say action is pertner function dependent is it true or it is actually partner function catagory dependant. In my case partner function category is same for manager and sales employee. The partner function category is "Employee"
looking for your guidence
Thanks
Kushal

Hi Kushal,
The partner function category is same - employee and hence it is triggering actions at the same time.
You may have to see if you can assign a separate partner function category to meet your requirement.
Hope this will be useful
Thanks and Regards
DJ

Creating a Custom Task for an external application

Hi
I want to create a custom task for our records management system, that just opens a particular file people use from within Incident Management every day.
The file is of extension .tr5 (which is our records management tool). I can open the file on my desktop. When I create the custom task, using the same file - I get a message ' The specified executable is not a valid Win32 application'
I can open the application fine using the custom task, but not the file.
Could it because there is no relationship from SCSM to the file type?
Any suggestions are appreciated.

Are you using the executable exe file and the filename as a parameter in the custom task?
Andreas Baumgarten | H&D International Group

Create Tasks for target group.

Hi guys.
I want craete Tasks for target group.
But, I don`t see "Employee Responsible" in "Create Business Transactions for Target Group Members".
How can I set Employee Responsible for Tasks?
Thanks.
Sergey.

Hi Sergey,
What i observed while creating Task from TG is we dont have fileds from where we can assign Emp responsible, as in Task Partner detemination(Standard) Access sequence we use for Emp responsible is User, and when we create Task from TG sytem takes User's Id as a Emp reponsible i.e. using which user u r creating Task from TG.
Regards,
DD's

Display tasks for activities created in Win CIC

Similar Messages

Maybe you are looking for