Activity Monitor: activites created before upgrade not displayed

Hi experts,
After upgrade from CRM4 to CRM7, the activity monitor (tcode S_AE2_89000019) is not working proprely. After several tests and analysis, we came to the conclusion that the logical database CRMLDB_ACT_MON used by the SAP Query of the Activity monitor is not fetching all results.
It seems that activities created after upgrade are well fetched. Old activities are not fetched
Has someone experimented the same problem?
Is there a specific action to perform on logical databases after upgrade?
Thanks in advance for your help

Hi Manfred,
Thanks for your answer. Unfortunately we haven't upgraded to Web UI yet..
I found the solution, I'm posting it just in case someone else is facing the same problem: CRMD_ORDER_INDEX is a table that consolidate orders data in order to make reports faster in CRM. This table is not updated after Upgrade, you need to run the program CRM_INDEX_REBUILD to have this table updated.
Many reports us this table. This report update data in new and obsolete tables as well (BUT021 and BUT021_FS)

Similar Messages

I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

My Macbook 4,1 came with 1 GB of memory. Only 512MB shows up in the activity monitor. I just upgraded the memory to 4 GB. Although 2GB shows up in DIMM0 and DIMM1 it still only says I have 512MB of memory. Can someone help?

My Macbook 4,1 came with 1 GB of memory. Only 512MB shows up in the activity monitor. I just upgraded the memory to 4 GB. Although 2GB shows up in DIMM0 and DIMM1 it still only says I have 512MB of memory. Can someone help?

So when you go to  > About This Mac - How it should say how much ram there. Click on More Info - And click on Memory - What is in those fields?

Newly created images will not display in Firefox 8 for Mac. Same images appear in other browsers. Why?

1. Specific new images are uploaded but will not display in Firefox 8 on my Mac with OS 10.6.8. (Does appear in other browsers, e.g., Chrome and Opera, and appears on Firefox 8 for PC.) Also, other images on the page display.
2. I have cleared cache, cookies, etc., in Recent History, and restarted both application and computer.
3. I've tried creating GIF, JPG and PNG, but none show on the page in Firefox on my Mac. I can see the offending image in other browsers such as Chrome on the same computer, and on Firefox on PC. Offending pages are in both PHP and HTML: http://www.brookfieldcivic.org/advertisers.php and http://www.brookfieldcivic.org/advertising_freedom_montessori.html
Image links: http://www.brookfieldcivic.org/images/advertisers/freedom.png and http://www.brookfieldcivic.org/images/advertisers/Freedom_Montessori_bizcard.jpg

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Newly Created Infoobjects are not displaying in the RSA1

Dear Experts,
When ever i am trying to create a new Info Object Characterstic/Keyfigure, i am able to create and activate it sucess fully, but when i am trying to see the same in corresponding infoobjects catelog in RSA1 that object is not displaying there.
When i am trying to find the same using "FIND' Option it is returing 'No Entries' as result even though i am sure that obj is created.
Please help me in this context.
Regards,
Rajkandula

Have you created that Infoobjects under a specific Catalog.If it is true try to find that catalog and you can find the Infoobjects there. If it is not true they will be under Unassigned nodes. Otherwise refresh your transaction once and try to find the Infoobject with find option.
I hope it will help you.
JM Krishna

New created values are not displaying after upload

Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AM

Hi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards

Activity Monitor shows Compressor functions as (Not Responding)

Hi Forum
I have noticed in Activity Monitor that I repeatedly get these messages in red:
CompressorJobController (Not Responding
qmasterqd (Not Responding)
CompressorTranscoderX (Not Responding)
ContentController (Not Responding)
Qmaster Task Service (Not Responding)
I have been force quitting them and then they continue to show up even if I don't have compressor open.
I compressed a 40min HD at 800kbs last night - I woke in the middle of the night thinking it would be done and it was only half way done. I opened Activity monitor to see what was going on. It said that the these functions were (Not Responding). But i noticed activity in the cpu column and in the threads and processes window. I decided to see if it was really hung. I let it go till morning. I finished in about 8 hours. Can this be true?
I am on the top of the line 17inch Macbook Pro. It seems like there are some anomalies that I don't understand. Should I disregard these recurring functions that say they aren't responding?
thanks
david

Here is some investigation I did, maybe someone can use this!?
While everything is running and suddenly all **** breaks loose, or rather just freezes in time.
Open Activity Monitor and select CompressorTranscoder and click the Inspect icon, you will get the process details and check the 'Open Files and Ports' tab.. There is where you will find all the files this process needs!! Here is the issue! you will notice some temporary and cache items,. open the terminal and using commands navigate to those file locations and Voila!! you see those files dont exist!! thats why this service has hanged.. The apple team needs to figure out how these files got closed without compressorTranscoder knowing about it!! BUG BUG BUG!!!

Activity Monitor % User and % System do not add up

Looking at my iMac i7 Activity Monitor/ All Processes/ CPU I find that the % User and % System do not add up to showing the correct % Idle.
For example, a recent screenshot shows % user = 0.81, the % System = 0.41 and % idle shows 61.25. The CPU usage graph show nothing going on and the Process Name list shows nothing unusual.
This constantly changes - sometimes the figures add up to 100% but usually the % Idle can be anywhere from 40% to a correct 98 - 99% based on nothing of any consequence running.
I look at the Activity Monitor on my MacBook and % Idle shows correct addition and a constant 98 - 99%.
What is going on?
Thank you.

This afternoon, it will be an entire week without a crash on my Squeezebox system!
Totally removing Intego VirusBarrier X6 from my main computer (iMac i7) finally lets me enjoy my music again.
The main problem is that X6 does not provide feedback as to what it is doing so the user cannot adjust the settings. In other words, no specific message as to what X6 just prevented.
As a crash can occur anywhere from 10 minutes to 8 hours of play time, hit or miss setting adjustments waste an amazing amount of time. This has been going on for a year with the frequency of crashes escalating.
I had already entered all my music devices on the Trusted List and had set up rules for all the ports that Squeezebox uses. Still crashed.
There is no reason why Logitech and/or Intego engineers cannot provide security setup instructions. Unfortunately, Logitech only shows security help for PCs.
Well the nightmare is over. Amazing what free time I now have.
The next three paragraphs are for Squeezebox owners and may be of some help if you are having problems:
A crash (for me) is defined in many ways. The worst crash is when the Squeezebox device shuts off and only pulling the electric plug will revive it. Another crash shows itself when the next song only plays for about 1 second and goes to the next song endlessly until the device shuts off. The Logitech manual says move the device closer to the wireless point when this happens but if they are connected by ethernet cables, this advice is useless. Another crash is when three units are synced and one of them suddenly is no longer in sync and playing a different song.
Crashes can occur when units are in sync or not in sync. Connected wirelessly or by ethernet. And when a crash occurs, the loud 'crunching' noise that occurs is not kind to the speakers.
BTW, if some devices are in sync, make sure these devices are connected the same way - either all wirelessly or all by ethernet. If you don't, you will experience sound lags of about 1/2 second. A very annoying echo effect.

Activity Monitor: how to quickly find "not responding" processes?

Is there a quick way, in Activity Monitor, to identify the apps/processes that are crashed/"not responding" other than scrolling down the list, looking for those highlighted in red?
If there's a particular column/attribute to sort on, I haven't figured it out.
Thanks!

Ah, in that case, watch your CPU usage.
When Activity Monitor starts, select either +All Processes+ or +Active Processes+ in the toolbar, and sort the list by the +% CPU+ column, so the highest numbers are on top, and select the CPU tab towards the bottom.
For this purpose, also select +View > Update Frequency > Less Often+ from the Menubar.
Various processes will "spike" up and down normally as they do things, then are idle, so you need to watch it for a while and get a feel for the processes that are using the most CPU, and the +% Idle+ at the bottom.
When the slowdown occurs, see if something changes significantly, especially if the +% idle+ goes to near zero. If that happens, see what process(es) are using the most CPU.
If the process(es) involved aren't familiar to you, post their names here (and/or check this out: http://triviaware.com/macprocess/all)
You may also want to select the +System Memory+ tab towards the bottom. Keep an eye on the total of Free and Inactive memory (if they're near zero, you may need more), and the +Page outs+ (if that's high, it's another indication you may need more memory).

HT201464 Running slowly - Activity Monitor has programs I am not familiar with running...

I am trying to get my macbook pro (2010 i5 4gb) running faster like it used to. I came across the activity monitor and have noticed lots of things I don't recognise. Can someone just tell me if I get rid of them will that help or damage my computer?

Do not touch any of the 'root' applications.
I suggest that you download an Etrecheck report as a start for possible trouble shooting.
http://www.etresoft.com/etrecheck
Ciao.

I activated my cloud membership and it worked. I just downloaded Lightroom 5.6 upgrade and it asked for a serial number. The same activation number I used before will not work now.

I activated my cloud membership and downloaded Lightroom 5.5. Today, I downloaded Lightroom 5.6 and it asked for a serial number before it would open. Why did the same serial number that worked 2 weeks ago not work now?

I activated my cloud membership and downloaded Lightroom 5.5. Today, I downloaded Lightroom 5.6 and it asked for a serial number before it would open. Why did the same serial number that worked 2 weeks ago not work now?

Activity Monitor says Final Cut is not responding

I'm very new to FCP and unsure as to why it does things like disappears from the Dock altogether, and loads one of my projects (the shorter one) but not the longer one at all (spinning beach ball until I have to shut computer down).
Any simple advice for a tech/computer/FCP dummy?
I'm an amateur so assume I know nothing!

This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
Make sure you're using the latest version of the application - FCP X 10.0.5 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.5.
Check that you have at least 20% free space on your system drive. Without this much free space, the drive cannot perform correctly for video editing.
For smooth playback without dropping frames, make sure 'Better Performance' is selected in the FCP X Preferences - Playback Tab.
If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you're getting crashes, you might have incompatible or corrupt media or project files. Move ALL your Events and Projects to temporary folders so that FCP X doesn't find them on launch. If it launches OK, re-introduce the Events and Projects one at a time, re-launching each time, so that you can track down the corrupt or incompatible files.
If FCP X doesn't launch (with no existing Events or Projects) I suggest you drag the application to the trash and reinstall it from the AppStore (using the same login that you used to buy it).
If you are still getting crashes, there could be some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install of the OS would be recommended.
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
If your playback in FCP X is not good, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
The downside of 'Proxy' is that it looks awful in the preview window. DON'T use Proxy when you're assessing things like video quality (especially focus) and colour correction.
If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Personally, I work with XDCAM EX and h.264 from a Canon DSLR. Both of these run fine with my system, but I do transcode multicam clips.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
http://assistedediting.intelligentassistance.com/EventManagerX/
Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

Website template created in PS not displaying correctly in Internet Explorer. Any ideas?

Hi there
I was wondering if anyone could help me with creating templates in photoshop.
I have cut up my site, centred the table it produces in Dreamweaver and added a background and made the banners rotate but the site does not load correctly in Internet Explorer (even before I did all this stuff). The cells are not correctly aligned.
I have also tired validating the code but it says it is not valid HTML.
Has anyone else had this problem?
My website can be viewed at: https://dl.dropbox.com/u/4966582/intranet/index.html
Thanks in advance

Photoshop is for images only. Don't attempt to use the exported code on real web sites. It won't work in the wild. Why? Because the code isn't good & the tables are too rigid to hold anything other than the image slices. When you attempt to edit this layout in DW or any HTML editor, the whole thing falls apart and produces unsightly gaps between slices.
The reason it doesn't look right in IE is because the code lacks a valid document type declaration on the first line. This causes IE to render the page in Quirks Mode.
The export HTML feature in Photoshop is really only for quick comps to show a client before you begin building the actual web site with HTML and CSS code.
Although written for Fireworks, the 3-part tutorial below describes the procedure for bringing your design comp into a CSS Layout in DW. If you get stuck on anything, feel free to post specific questions in the DW general discussion forum.
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
Have fun!
Nancy O.

Dynamically created "alt" attribute not displaying

Hi, I have created a details page for our company product, which is diplayed dynamically. I have on this page a dynamic image as well thats pulled from my database. As with any image on the web, I want to set the alt attribute, but of course this has to be dynamic as well. I have done this it seems, as I view my source code from a browser, I can see that the alt has a value there and that it is the correct value. My question is, why doesnt this display when I mouse over the image? Is there something I am forgetting to add? Is this attribute deprecated? here is my code for the alt cfoutput:
function(){return A.apply(null,[this].concat($A(arguments)))}
<cfoutput>
          <table align="center">
            <tr>
              <td><cfif rsDetails.image1 NEQ "">
                  <a href="images/#rsDetails.image1#" target="_blank"><img src="images/#rsDetails.image1#" alt="#rsDetails.item#" /></a>
                </cfif></td>
            </tr>
          </table>
        </cfoutput>
Here is the source code from the browser that shows there is an alt value:
function(){return A.apply(null,[this].concat($A(arguments)))}
<table align="center">
    <tr>
       <td>
         <a href="images/60K19DL.jpg" target="_blank"><img src="images/60K19DL.jpg" alt="60K19/DL" /></a>
       </td>
    </tr>
</table>
I hope this is easy to understand without going into lengthy detail. Thanks for any help!

Ok I understand what you're saying now. lol I did try my code without the <a> tag but still didn't work. SO thats kinda weird.
However, until you pointed it out, I didn't realize his site didn't have the mouse tips in firefox or that other browsers didn't support it, so I guess its not that important after all...the tips I mean.
I hate IE too! but unfortunately when dealing with an online wholesale site, I must use and develop for IE.
Anyway, thanks for the help! I may try the title attribute, but I think as long as I have the alt for SEO then I am fine.

Web Gallery created in Bridge not displaying first picture correctly on a Unix server

Hi Guys, Am really stumped by a problem that has surfaced after moving from a Windows web hosting server to a Unix hosting platform. The Web Galleries created in both Bridge CS4 and CS6 display and operate as expected on the Windows server. However, having moved to a Unix hosting platform, I observe an odd behavior when going to the Web Gallery page. When the gallery loads, it displays the first image offset. This is always the top left hand quarter of the picture, offset to show in the bottom left hand corner, leaving the top left and right quarters and the bottom left quarter black (I use quarters to best describe the situation, though it really does seem as if the view port of the Gallery is indeed quartered for this first image).
If I click on the second image in the series, it appears full size. The same happens if I click on the "Play" button. If I return to the first image manually, it displays full size.
The phenomenon is apparent in Firefox 19.0.2, IE9, Opera and Chrome, all of the latest build.
Can anyone throw some light on why this phenomenon is occurring and better still, suggest a cure?
Grateful for all and any help anyone can give.
Cheers, Daviddhg

Hi Guys, This turned out to be a Unix server-side issue. Apparently the compression software being used by the ISP on this server was in some way incompatible. The ISP turned the compression off and the problem was cured.
Cheers, Daviddhg

Activity Monitor: activites created before upgrade not displayed

Similar Messages

Maybe you are looking for