Display Technical Names for al users

Hi
My requirement is: Every user should able to see SAP Technical Names after he/she login. What is the global parameter we need setup and where? Normally individual user can setup by selecting Extras -> Settings --> Technical Names On
Thank you,
Mohan

Hi,
those settings are stored in table AGR_DATEU where ID = 'BROWSER_OPT' and UNAME is user name. I don't know about any global parameter. There are two FMs PRGN_SET_BROWSER_OPTIONS_USER and PRGN_GET_BROWSER_OPTIONS_USER which you can use to write a report which will set this parameter to all users.
Cheers

Similar Messages

Technical names for drop down values through webui

Hi All, I have ECC 6.0 (SAPKH61705) transactions being launched in CRM 7.0 (SAPKU71305) through the transaction launcher. We are able to display technical names for values in ECC through the gui, and in CRM in both the gui and webui. Is it possible to display the technical names for ECC through the webui? Apologies if this is not the correct forum, I was not sure where to post. For further clarification of the issue, I hope these screen shots assist: ECC gui with 'display technical names' activated: qui - tech names on.jpg CRM webUI with 'display technical names' activated in both ECC and CRM: webui - tech names not visible.jpg Assistance appreciated.

Hi Amy,
Yes, it's possible.
You can achieve it by coding. Instead of passing only the description to your drop down values, we can send technical name and description simultaneously to your drop down value. That's it.
BR,
RAM.

Authorization check on technical name for statistical key figures

Dear experts,
I need an authorization check on the technical name for statistical key figures. I would like to avoid that local users can change/modify centrally defined key figures which follow a given naming convention.
I checked the authorization object K_KA03 for statistical key figures but this doesn't help as it only checks controlling area and activity. I also couldn't find the technical name as an authorization field.
What can I do to set up an authorization check on the technical name of the statistical key figure if it is not foreseen in the standard?
Thanks for any ideas,
René

Try something in similar lines as suggested in below link:
https://wiki.sdn.sap.com/wiki/display/PLM/COValidationstoadditionalauthorisations+checks
Regards
Sreenivas

Technical name for formula in query designer

Hi,
We have created some formulas in Query Designer.
We tried to assign the technical names to these existing formulas, it goes away as the save button on the top of the pop up is disabled.
Is there a way to assign technical names of the formulas created in the query designer.
Regards,
Charu

Charu Pandey,
Formulas are local, means available for particular queries only. No technical name.
Create Calculated keyfigures instead of formulas..., so you can save with technical names.
To display technical name in query, give discription same as technical name.
Hope it Helps
Srini

Displaying technical names

Hi,
Is there a way to display technical names of the organizational levels in PFCG. I understand that we can display technical names of the auth objects using utilities -> technical names on. I want to be able to display the technical names when I click on the organizational levels button. for example in the org levels screen, I want to be able to see BUKRS instead of company code. Please help. thanks

Hi.
You should already be able to see the organisational field in the authorization object.
See this image:
http://img177.imageshack.us/img177/2950/bukrs.jpg
You should also see that the field is organizational by the $sign.
But, when you have many field it can be hard to know which field is what. So to find the field from the name you simply do:
Open the Organisational popup.
Put the cursor on a line and press F1.
Then you get the Performance Assistant
Here you press the Technical informationbutton according the image:
http://img232.imageshack.us/img232/1964/orgl.jpg
Now you see the name of the field.
http://img207.imageshack.us/img207/1684/techname.jpg
Regards
Fredrik

Data target technical name for a query

Hi
Can some one tell me how to find the respective data target technical name for a report (query)?
Thanks
Abhi

Hi,
Create a View on tables RSZCOMPDIR and RSZCOMPIC and take fields INFOCUBE,COMPID and keep join condition
1) RSZCOMPDIR-COMPUID = RSZCOMPIC-COMPUID.
2) RSZCOMPDIR-COMPUID = RSZELTDIR-ELTUID.
and keep condition RSZELTDIR-DEFTP = 'REP'.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma
Message was edited by: Anil Kumar Sharma

Retrieving user detail, group name for all users

Hi,
How can I retrieve User name, email, authentication, user group name
for all users using SDK.
It is possible to create this report in webi or CR?
Thank you for reply,
Gregor

Use the following code to retrieve this information:
IInfoObjects users = oInfoStore.query("select * from ci_systemobjects where si_kind='user'");
for (int i=0; i<users.size(); i++)
         IUser user = (IUser)users.get(i);
         // user.getTitle(); for user name
         // user.getFullName(); for user's full name
         // user.getEmailAddress(); for user's email address
         // for authentication type:
         IUserAliases alises = user.getAliases();
         for(int j=0; j<aliases.size();j++)
                   IUserAlias alias = alises.get(j);
                   // alias.getAuthentication() for authentication associated with this alias, since same user can have more than 1 authentication. e.g. Enterprise and Ldap.
         // for user group memberships:
         java.util.Set groups = user.getGroups();
         // the groups Set object will contain SI_ID of all the user groups that this uses is member of. You need to query by the SI_ID of the usergroup to get the group names.
// e.g.
//    oInfoStore.query("select si_id, si_name from ci_systemobjects where si_kind='usergroup' and si_id in (a,b,c....)");
where a,b,c are the SI_IDs of the usergroups.
To create a report based on the above fetched data, there are several methods such as:
you can use Java resultset where in you create the report structure in designer and push the data at runtime using java result set objects. Another way is to push this info in Excel or Access and design your report based on that excel\access.

Is "ipad Air retina display" another name for "ipad Air 2"?

Is "ipad Air retina display" another name for "ipad Air 2"?

I guess you could call it that if you wanted to but the iPad Air 2 is known by the name "iPad Air 2". The name "iPad with Retina Display" was first given to what is now known as the iPad 3rd generation which now goes by the name "iPad 3rd generation". Same goes for the IPad 4th generation.

Change display name for existing users

Hi,
We have alot of users in our Active Directory. After an migration our existing users are displaying their name wrong. When we create a new user the display name is set FirstName LastName. But all of our old users have their User logon name as display name.
Is there a way to change the display name of our old users to FirstName LastName instead of the user logon names they are displaying now? Doing this per user is a hell of a job so this really isn't an option.
Example:
Full name: Peter Peterson. User logon name: pepeter. Display name: pepeter. (old user)
Full name: Tom Thompson. User logon name: tothomp. Display name: Tom Thompson. (new user)
Greetz,
Tom

I have found a script for Powershell that may be the answer to my question. There is only one thing that is not in the script. The script runs for all users. The PageSize is set to 2000 so it runs 2000 entries. Is there a way that I can run this script for
all Users in AD that start with the letter "A" or with an other letter. :P
$previewMode = $true #change value to $false ONLY after you have verified the preview!!!
$CurrentDomain = [System.DirectoryServices.ActiveDirectory.Domain]::GetCurrentDomain()
$Domain = [System.DirectoryServices.DirectoryEntry]"LDAP://$CurrentDomain"
$Searcher = New-Object System.DirectoryServices.DirectorySearcher
$Searcher.PageSize = 2000
$Searcher.SearchScope = "Subtree"
$Searcher.Filter = "(&(objectCategory=person)(objectClass=user)(!(objectClass=computer)))"
$Searcher.PropertiesToLoad.Add("userPrincipalName") > $Null
$Searcher.PropertiesToLoad.Add("givenName") > $Null
$Searcher.PropertiesToLoad.Add("sn") > $Null
$Searcher.PropertiesToLoad.Add("distinguishedName") > $Null
$Searcher.SearchRoot = "LDAP://" + $Domain.distinguishedName
$SearchResults = $Searcher.FindAll()
$dnsSuffix = $CurrentDomain.Name
foreach ($Result in $SearchResults){
               $firstName = $Result.Properties.Item("givenName")
               $lastName = $Result.Properties.Item("sn")
               $newLogonName = "$firstName $lastName"
                [System.DirectoryServices.DirectoryEntry]$userObject = $Result.GetDirectoryEntry()
                $oldLogonName = $userObject.sAMAccountName
    Write-Host "Changing $oldLogonName to $newLogonName..."
    try {
        if (!($previewMode)) {
                   $userObject.cn = $newLogonName
           $userObject.CommitChanges()
        Write-Host "$oldLogonName successfully changed to $newLogonName."
    catch{
        Write-Host "Error changing $oldLogonName to $newLogonName."

Display technical name of a query in a web template ?

Hi,
I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
I have selected 'Display General Text Elements' in properties of the web item.
In the property 'List of Text Elements', what is the couple of values that I have to configure ?
Many thanks,
CG.

Hi,
What you need to do is, keep a TEXT Web Item in the template.
Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
This will give the technical name of the query in the output.
Common text elements:
u2212 technical name of the query (REPTNAME)
u2212 description of the query (REPTXTLG)
u2212 InfoProvider (INFOCUBE)
u2212 key date for the query (SRDATE)
u2212 accuracy of the data (date and time) (ROLLUPTIME)
u2212 the person who wrote the query (AUTHOR)
u2212 the last time the query was changed (date and time)
(MODTIME)
u2212 the last person to make changes to the query (MODUSER)
u2212 current user (SYUSER)
u2212 the last time the query was refreshed (date and time)
(SYUZEIT)
Try this. Hope it helps.

Query Displaying Technical Name instead of Description

Hello,
Is there a setting in query designer that would cause the query technical name to display when the query is executed instead of the query description? I am using BEx 3.5. When I Save As the query to a different technical name and execute the description shows. I would like the description to show as it does with all other queries.
Any help would be appreciated.
Thanks!
Tina

Hi Tina,
For me the most convienent way is to create a text variable with customer exit, not ready for input.
Assign this variable to Query description in properties of query. So you can be sure to see the current
technical name after saving the query again, without any additonal actions.
You could even combine this variable with any description desired.
Assuming variable created is Z_COMPID, please add code as follows to user exit:
WHEN 'Z_COMPID'.
      L_S_RANGE-LOW = I_S_RKB1D-COMPID.
      L_S_RANGE-SIGN     = 'I'.
      L_S_RANGE-OPT      = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
Regards
Joe

Problem with "Group By" in Views - Not Displaying the Same for All Users

We have an Announcements List with its only View being set up to group by a metadata category field. We've done this many times on other kinds of lists and never had a problem. But with this list, about half the users can see only the ungrouped
set of announcements, whereas others actually see the items within their groups.
Those with "View" rights only can't see the grouped items - but that appears to be a coincidence as I promoted them to the same rights as others who can see them correctly, and that did NOT solve the problem. Everyone is using the exact same browser.
Note: the users who do NOT see the groupings see only a single category entry that displays only the name of the category list (but not the names of the actual categories within the category list). All the announcements are grouped under that one
entry for those users. This display looks exactly like it would if the categories had been left blank when the original announcements were created. But the categories are NOT blank, and the rest of the users can see them just fine, and the announcements display
within their appropriate groups.
I can't find anything in the View, the List Settings, or the User Permissions to explain this. What could be causing it, and how can I fix it?

Browser settings are controlled by central IT and are all identical.
The only difference I can detect is the second set of users (that don't see the category options) have only Read rights, whereas those with Contribute (or above) rights can see the categories. It doesn't make
sense that permissions would affect this, but I can't come up with any other differences.
Microsoft will not allow me to upload images. it says I can't upload images until they have verified my account, but there is no clue as to how, if or when that might happen. If you can tell me how to fix that, I can provide samples.

Inputting technical name for varaints in portal makes it viewable to all

Hello all, we are BI 7.0 using Portal for reporting
This is the issue I am facing, when an user is trying to save a varaint for any particular query it asks for description and technical name. Now if the user only enters description and not tech name still the system accepts it and it works fine. If user inputs both the fields still it works fine. But now the difference is that if the user has entered technical name than that varaint can be viewed by all the users kind off like global variant for everyone; and if the user only inputs description than only the user that created the varaint can see it.
So i just want to take away the technical name box from that screen; where/which template do I need to modify? I am using 0ANALYSIS_PATTERN for reporting.
Is there any other work around for this or information that i am missing and i am seeing such behavior can someone explain.
Thanks in advance

Hi guys,
Thanks for your answers first of all.
I don't want to store the technical name of the openhub in the logical file name....i want this to be determined dynamically, depending on the openhub that is used with this logical file name.
I was wondering were i can fetch the openhub technical name during the execution of the DTP on the openhub / when also the function module FILE_GET_NAME is being ran.
Let me know!
Thanks in advance!
Regards,
Freek

Actions not displaying in Overview for ONE user ID

Hi Frnz...
For only ONE user ID Actions not displaying in Overview tab.
For this User ID Overview details are visible for some Employee IDs and for some its not visible.
Already checked Roles & Authorisations and IT 0302 & 0000 are active. Have also run RPUEVSUP.
Just to add.. this query is happening while a technical upgrade has happened from 4.6 to 6.0.
Pls help me ..
Rgds.. Raj

Hi,
I hope you have done this but FYR
Before clicking on the overview button maintain the dates as 01.01.1900 and 31.12.9999
Thanks
ABHI

Display technical names of restricted key figures

Hi everybody,
In a query, I would like to display the technical names of restricted key figures instead of their description as a heading. Is that possible and how can I do this?
Thank you for any help, regards, Kathrin!

Hi Kathrin,
I believe you can do this in only one query.In the query you want to have the technical name ..Rigth click>properties> description will change the name of the field only in that specific query..not for all the queries..
Else you can run the query and make changes in workbook format..Even this should serve the purpose..
Ashish.

Display Technical Names for al users

Similar Messages

Maybe you are looking for