Display two Different reports together

Hi Experts,
Is there any way that I can display two different reports simultaneously/together in Web Portal
Thanks in advance.

Hi Manpreet,
Although we can easily perform this in WAD , but as you asked the other option which requires some coding .
Check the below thread for the same :
how to display two lables in alv report
Hope it helps,
Supriya

Similar Messages

ALV Report to have two different Reports

Hi All,
I have a need to display two different reports for the same set of data selections, (Successful data and Error Data) in a Single ALV Layout using a Application tool bar Button. Does anyone have a sample code for this kind of requirement. Preferably using Objects.
Also, how can we check if an object is already created? In other words, how to check for a null reference?
Thanks in advance.
Jr.

Sample code for split alv using OOABAP.
this would help you in ur requirement.
go through this program where the screen is divided in two for two alv in different containers.
DATA: save_ok LIKE sy-ucomm,
      g_container TYPE scrfname VALUE 'CC1',
      g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      g_max TYPE i VALUE 100.
declarations for top of page event
Data: gv_c_split type ref to cl_gui_splitter_container,
       gv_c_ptv type ref to cl_gui_container,
       gv_alv_ptv type ref to cl_gui_alv_grid,
       o_dd_doc TYPE REF TO cl_dd_document,
       text TYPE sdydo_text_element,
       o_split type ref to cl_gui_easy_splitter_container,
       o_top type ref to cl_gui_container,
       o_bot type ref to cl_gui_container,
       gv_c_vp type ref to cl_gui_container.
end of declaration for top of page.
CLASS lcl_event_receiver DEFINITION DEFERRED.
*class lcl_application_dc definition deferred.
DATA: o_event_receiver TYPE REF TO lcl_event_receiver.
     g_dc type ref to lcl_application_dc.
DATA: gt_outtab TYPE TABLE OF sbook.
      CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS: handle_f4 FOR EVENT onf4 OF cl_gui_alv_grid
               IMPORTING e_fieldname
                         es_row_no
                         er_event_data
                         et_bad_cells
                         e_display,
            handle_top_of_page FOR EVENT top_of_page OF cl_gui_alv_grid
               IMPORTING e_dyndoc_id.
    METHODS: reset.
    METHODS: show_f4.
PRIVATE SECTION.
attributes for creating an own F4-Help
(using a second ALV Grid Control
    DATA: f4_grid TYPE REF TO cl_gui_alv_grid,
          f4_custom_container TYPE REF TO cl_gui_custom_container.
    TYPES: BEGIN OF ty_f4.
    TYPES: value TYPE s_class.
    TYPES: descr(20) TYPE c.
    TYPES: END OF ty_f4.
    DATA: f4_itab TYPE TABLE OF ty_f4.
    DATA: f4_fieldcatalog TYPE lvc_t_fcat.
attributes to store event parameters
(after the CALL SCREEN command, the event parameters
are not accessible)
    TYPES: BEGIN OF onf4_event_parameters_type.
    TYPES: c_fieldname     TYPE lvc_fname.
    TYPES: cs_row_no       TYPE lvc_s_roid.
    TYPES: cr_event_data   TYPE REF TO cl_alv_event_data.
    TYPES: ct_bad_cells    TYPE lvc_t_modi.
    TYPES: c_display       TYPE char01.
    TYPES: END OF onf4_event_parameters_type.
    DATA: f4_params TYPE onf4_event_parameters_type.
Methods to create own F4-Help
(This is done using a second ALV Grid Control)
    METHODS: init_f4.
    METHODS: build_fieldcatalog.
    METHODS: fill_f4_itab .
    METHODS: on_double_click FOR EVENT double_click OF cl_gui_alv_grid
                    IMPORTING es_row_no.
ENDCLASS.                    "lcl_application_f4 DEFINITION
      CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
*§2. Implement an event handler method for event ONF4.
METHOD handle_f4.
Save event parameter as global attributes of this class
(maybe solved differently if you use a function module!)
    f4_params-c_fieldname = e_fieldname.
    f4_params-cs_row_no = es_row_no.
    f4_params-cr_event_data = er_event_data.
    f4_params-ct_bad_cells = et_bad_cells.
    f4_params-c_display = e_display.
*§3. Call your own f4 help. To customize your popup check
   first if the cell is ready for input (event parameter E_DISPLAY).
(parameter E_DISPLAY is checked later in method on_double_click)
(Probably, you would call a function module at this point,
pass the needed event parameter and call the popup screen
within that function module. This is not done in this example
to avoid scattering its code).
    CALL SCREEN 101 STARTING AT 10 10.
*§7. Inform the ALV Grid Control that an own f4 help has been processed
   to suppress the standard f4 help.
    er_event_data->m_event_handled = 'X'.
ENDMETHOD.                                                "on_f4
METHOD show_f4.
   DATA: ls_outtab TYPE sbook.
initialize own f4 help if needed
    IF f4_custom_container IS INITIAL.
      CALL METHOD init_f4.
    ENDIF.
    CALL METHOD fill_f4_itab.
refresh list of values in f4 help and show it
    CALL METHOD f4_grid->refresh_table_display.
CAUTION: Do not use method REFRESH_TABLE_DISPLAY for
your editable ALV Grid instances while handling events
DATA_CHANGED or ONf4. You would overwrite intermediate
values of your output table on frontend.
'f4_grid' is a non-editable ALV Grid Control for the
application specific F4-Help. Therefore, calling
REFRESH_TABLE_DISPLAY for this instance has no
negative effect.
    CALL METHOD cl_gui_cfw=>flush.
ENDMETHOD.                                                "show_f4
METHOD init_f4.
    DATA: ls_f4_layout TYPE lvc_s_layo.
build fieldcatalog entries for f4
    CALL METHOD build_fieldcatalog.
create controls
    CREATE OBJECT f4_custom_container
              EXPORTING container_name = 'CC_ONF4'.
    CREATE OBJECT f4_grid
              EXPORTING i_parent = f4_custom_container.
hide toolbar
    ls_f4_layout-no_toolbar = 'X'.
    CALL METHOD f4_grid->set_table_for_first_display
      EXPORTING
        is_layout       = ls_f4_layout
      CHANGING
        it_fieldcatalog = f4_fieldcatalog
        it_outtab       = f4_itab.
register event double click on backend
    SET HANDLER me->on_double_click FOR f4_grid.
flush since 'ls_layout' is local!
    CALL METHOD cl_gui_cfw=>flush.
ENDMETHOD.                                                "init_f4
METHOD fill_f4_itab.
    DATA ls_f4_itab TYPE ty_f4.
Delete all entries in f4_itab to determine
offered values dynamically
    CLEAR f4_itab[].
    ls_f4_itab-value = 'C'.
    ls_f4_itab-descr = text-t03. "Business Class
    APPEND ls_f4_itab TO f4_itab.
    ls_f4_itab-value = 'Y'.
    ls_f4_itab-descr = text-t04. "Economie Class
    APPEND ls_f4_itab TO f4_itab.
    ls_f4_itab-value = 'F'.
    ls_f4_itab-descr = text-t05. "First Class
    APPEND ls_f4_itab TO f4_itab.
ENDMETHOD.                    "fill_f4_itab
METHOD build_fieldcatalog.
    DATA: ls_fcat TYPE lvc_s_fcat.
    CLEAR ls_fcat.
    ls_fcat-fieldname = 'VALUE'.
    ls_fcat-coltext = text-t02.
   ls_fcat-inttype = 'S_CLASS'.
    ls_fcat-outputlen = 5.
    APPEND ls_fcat TO f4_fieldcatalog.
    CLEAR ls_fcat.
    ls_fcat-fieldname = 'DESCR'.
    ls_fcat-coltext = text-t01.
    ls_fcat-inttype = 'C'.
    ls_fcat-outputlen = 20.
    APPEND ls_fcat TO f4_fieldcatalog.
ENDMETHOD.                    "build_fieldcatalog
METHOD on_double_click.
*§5. If not already caught by your own f4 help, check whether
   the triggered cell was ready for input by using E_DISPLAY
   and if not, exit.
    IF f4_params-c_display EQ 'X'.
      LEAVE SCREEN.
    ENDIF.
*§6. After the user selected a value, pass it to the ALV Grid Control:
*§ 6a. Define a field symbol of type: LVC_T_MODI and a structure of
      type LVC_S_MODI to pass the value later on.
    FIELD-SYMBOLS TYPE lvc_t_modi.
    DATA: ls_modi TYPE lvc_s_modi,
          ls_f4_itab TYPE ty_f4.
*§ 6b. Dereference attribute M_DATA into your field symbol and add
      the selected value to the table to which this symbol points to.
    ASSIGN f4_params-cr_event_data->m_data->* TO .
    LEAVE TO SCREEN 0.
ENDMETHOD.                    "on_double_click
METHOD reset.
    FIELD-SYMBOLS display_document
             EXPORTING parent = o_top.
ENDMETHOD.                    "handle_top_of_page
ENDCLASS.                    "lcl_application_f4 IMPLEMENTATION
END-OF-SELECTION.
CALL SCREEN 100.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
    PERFORM create_and_init_alv CHANGING gt_outtab[]
                                         gt_fieldcat.
ENDIF.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
save_ok = sy-ucomm.
CLEAR sy-ucomm.
CASE save_ok.
    WHEN 'EXIT' OR 'BACK' OR 'CANCEL'.
      PERFORM exit_program.
    WHEN 'SWITCH'.
      PERFORM switch_edit_mode.
    WHEN OTHERS.
    do nothing
ENDCASE.
ENDMODULE.                    "pai INPUT
      FORM EXIT_PROGRAM                                             *
FORM exit_program.
LEAVE PROGRAM.
ENDFORM.                    "exit_program
*&      Form build_fieldcat
      text
     -->PT_FIELDCAT text
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'SBOOK'
    CHANGING
      ct_fieldcat      = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
Exchange smoker field with invoice field - just to
make the dependance between SMOKER and CLASS more transparent
(Smoking is only allowed in the first class).
    IF ls_fcat-fieldname EQ 'SMOKER'.
      ls_fcat-col_pos = 11.
      ls_fcat-outputlen = 10.
      ls_fcat-edit = 'X'.
Field 'checktable' is set to avoid shortdumps that are caused
by inconsistend data in check tables. You may comment this out
when the test data of the flight model is consistent in your system.
      ls_fcat-checktable = '!'.        "do not check foreign keys
      MODIFY pt_fieldcat FROM ls_fcat.
    ELSEIF ls_fcat-fieldname EQ 'INVOICE'.
      ls_fcat-col_pos = 7.
      MODIFY pt_fieldcat FROM ls_fcat.
    ELSEIF    ls_fcat-fieldname EQ 'CLASS'.
      ls_fcat-edit = 'X'.
      ls_fcat-outputlen = 5.
      ls_fcat-checktable = '!'.        "do not check foreign keys
      MODIFY pt_fieldcat FROM ls_fcat.
    ENDIF.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form create_and_init_alv
      text
     -->PT_OUTTAB    text
     -->PT_FIELDCAT text
FORM create_and_init_alv CHANGING pt_outtab TYPE STANDARD TABLE
                                  pt_fieldcat TYPE lvc_t_fcat.
DATA: lt_exclude TYPE ui_functions,
        ls_layout TYPE lvc_s_layo.
CREATE OBJECT g_custom_container
          EXPORTING container_name = g_container.
CREATE OBJECT g_grid
        EXPORTING i_parent = g_custom_container.
CREATE OBJECT gv_c_split
     EXPORTING
      link_dynnr        = lv_dynnr
      link_repid        = lv_repid
      parent            = g_custom_container
      rows              = 2
      columns           = 1
     EXCEPTIONS
       cntl_error        = 1
       cntl_system_error = 2
       others            = 3    .
CALL METHOD gv_c_split->set_border
   EXPORTING
     border            = space.
CALL METHOD gv_c_split->get_container
     EXPORTING
       row       = 1
       column    = 1
     RECEIVING
       container = gv_c_ptv.
CALL METHOD gv_c_split->set_row_height
    EXPORTING
      id                = 1
      height            = 20
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 6 .
CALL METHOD gv_c_split->get_container
     EXPORTING
       row       = 2
       column    = 1
     RECEIVING
       container = gv_c_vp .
CALL METHOD gv_c_split->set_row_height
    EXPORTING
      id                = 2
      height            = 10
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3 .
   CREATE OBJECT o_split
     EXPORTING
      parent            = gv_c_ptv
      with_border       = 1
     EXCEPTIONS
       cntl_error        = 1
       cntl_system_error = 2
       others            = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
o_top = o_split->top_left_container.
o_bot = o_split->bottom_right_container.
CREATE OBJECT gv_alv_ptv
     EXPORTING
       i_parent          = o_bot
     EXCEPTIONS
       error_cntl_create = 1
       error_cntl_init   = 2
       error_cntl_link   = 3
       error_dp_create   = 4
       others            = 5    .
CREATE OBJECT g_grid
        EXPORTING
          i_parent          = gv_c_vp
        EXCEPTIONS
          error_cntl_create = 1
          error_cntl_init   = 2
          error_cntl_link   = 3
          error_dp_create   = 4
          others            = 5    .
PERFORM build_fieldcat CHANGING pt_fieldcat.
Optionally restrict generic functions to 'change only'.
(The user shall not be able to add new lines).
PERFORM exclude_tb_functions CHANGING lt_exclude.
PERFORM build_data CHANGING pt_outtab.
ls_layout-grid_title = 'F4 help implemented for field CLASS'.
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_top_of_page FOR gv_alv_ptv.
SET HANDLER o_event_receiver->handle_top_of_page FOR g_grid.
CREATE OBJECT o_dd_doc EXPORTING style = 'ALV_GRID'
                                   no_margins = 'X'.
CALL METHOD gv_alv_ptv->set_table_for_first_display
   EXPORTING
     is_layout                    = ls_layout
CHANGING
    it_outtab                     = pt_outtab[]
    it_fieldcatalog               = pt_fieldcat
EXCEPTIONS
    invalid_parameter_combination = 1
    program_error                 = 2
    too_many_lines                = 3
    OTHERS                        = 4.
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      it_toolbar_excluding = lt_exclude
      is_layout            = ls_layout
    CHANGING
      it_fieldcatalog      = pt_fieldcat
      it_outtab            = pt_outtab[].
CALL METHOD gv_alv_ptv->list_processing_events
    EXPORTING
      i_event_name      = 'TOP_OF_PAGE'
       i_dyndoc_id       = o_dd_doc.
register f4 for field CLASS
PERFORM register_events.
Set editable cells to ready for input initially
CALL METHOD g_grid->set_ready_for_input
    EXPORTING
      i_ready_for_input = 1.
ENDFORM.                               "CREATE_AND_INIT_ALV
*&      Form exclude_tb_functions
      text
     -->PT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
Only allow to change data not to create new entries (exclude
generic functions).
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
APPEND ls_exclude TO pt_exclude.
ENDFORM.                               " EXCLUDE_TB_FUNCTIONS
*&      Form build_data
      text
--> p1        text
<-- p2        text
FORM build_data CHANGING pt_outtab TYPE STANDARD TABLE.
DATA: ls_sbook TYPE sbook,
        l_index TYPE i.
SELECT * FROM sbook INTO TABLE gt_outtab UP TO g_max ROWS.
IF sy-subrc NE 0.
    PERFORM generate_entries CHANGING pt_outtab.
ENDIF.
LOOP AT pt_outtab INTO ls_sbook.
    l_index = sy-tabix.
    CLEAR ls_sbook-class.
Alternate between smoker and non smoker to make
it more obvious what this example is about
    l_index = l_index MOD 2.
    IF l_index EQ 1.
      ls_sbook-smoker = 'X'.
    ELSE.
      ls_sbook-smoker = ' '.
    ENDIF.
    MODIFY pt_outtab FROM ls_sbook.
ENDLOOP.
ENDFORM.                               " build_data
*&      Form generate_entries
      text
     -->PT_SBOOK   text
FORM generate_entries CHANGING pt_sbook TYPE STANDARD TABLE.
DATA: ls_sbook TYPE sbook,
        l_month(2) TYPE c,
        l_day(2) TYPE c,
        l_date(8) TYPE c,
     l_prebookid TYPE i.
ls_sbook-carrid = 'LH'.
ls_sbook-connid = '0400'.
ls_sbook-forcurkey = 'DEM'.
ls_sbook-loccurkey = 'USD'.
ls_sbook-custtype = 'B'.
DO 110 TIMES.
    l_prebookid = sy-index.
    ls_sbook-forcuram = sy-index * 10.
    ls_sbook-loccuram = ls_sbook-loccuram * 2.
    ls_sbook-customid = sy-index.
    ls_sbook-counter = 18.
    ls_sbook-agencynum = 11.
    l_month = sy-index / 10 + 1.
    DO 2 TIMES.
      l_day = 3 + l_month + sy-index * 2.
      l_date+0(4) = '2000'.
      l_date+4(2) = l_month.
      l_date+6(2) = l_day.
      ls_sbook-fldate = l_date.
      SUBTRACT 3 FROM l_day.
      ls_sbook-order_date+0(6) = l_date+0(6).
      ls_sbook-order_date+6(2) = l_day.
      ls_sbook-bookid = l_prebookid * 2 + sy-index.
      IF sy-index EQ 1.
        ls_sbook-smoker = 'X'.
      ELSE.
        ls_sbook-smoker = space.
      ENDIF.
      ls_sbook-luggweight = l_prebookid * 10.
      IF ls_sbook-luggweight GE 1000.
        ls_sbook-wunit = 'G'.
        ls_sbook-class = 'C'.
      ELSE.
        ls_sbook-wunit = 'KG'.
        ls_sbook-class = 'Y'.
      ENDIF.
      IF ls_sbook-bookid > 40 AND ls_sbook-wunit EQ 'KG'.
        ls_sbook-invoice = 'X'.
      ENDIF.
      IF ls_sbook-bookid EQ 2.
        ls_sbook-cancelled = 'X'.
        ls_sbook-class = 'F'.
      ENDIF.
      APPEND ls_sbook TO pt_sbook.
    ENDDO.
ENDDO.
ENDFORM.                               " generate_entries
*&      Form register_events
      text
FORM register_events.
*§1. Register event ONF4 at frontend using method
   register_f4_for_fields. For this purpose, you pass a table
   with all fields, for which you want to implement your own
   f4 help.
remark: If you want to use an own f4 help for fields where
        no standard f4 help exists set field F4AVAILABL for
        this field in the fieldcatalog.
DATA: lt_f4 TYPE lvc_t_f4 WITH HEADER LINE.
CLEAR lt_f4.
lt_f4-fieldname = 'CLASS'.
If you would like to deregister the field again,
pass value SPACE with field 'register'.
lt_f4-register = 'X'.
*§ 1b. If the value range in your f4 help depends on other
      values of cells that are input enabled, set the
      GETBEFORE parameter.
The consequence is that the ALV Grid Control raises
event DATA_CHANGED before the f4 help is called to
check values that the f4 help depends on.
lt_f4-getbefore = 'X'.
The next parameter is used to change values after onf4 has
been processed. The ALV Grid Control will raise
event DATA_CHANGED afterwards, if you set it.
lt_f4-chngeafter = space.
INSERT TABLE lt_f4.
CALL METHOD g_grid->register_f4_for_fields
    EXPORTING
      it_f4 = lt_f4[].
register events for abap objects (backend)
SET HANDLER o_event_receiver->handle_f4 FOR g_grid.
ENDFORM.                    " register_events
MODULE status_0101 OUTPUT
MODULE status_0101 OUTPUT.
SET PF-STATUS 'POPUP'.
SET TITLEBAR 'POPUP'.
CALL METHOD o_event_receiver->show_f4.
ENDMODULE.                 " STATUS_0101 OUTPUT
*&      Module USER_COMMAND_0101 INPUT
      text
MODULE user_command_0101 INPUT.
PERFORM user_command.
ENDMODULE.                 " USER_COMMAND_0101 INPUT
*&      Form user_command
      text
FORM user_command.
DATA: save_ok TYPE sy-ucomm.
save_ok = sy-ucomm.
CLEAR sy-ucomm.
CASE save_ok.
    WHEN 'CANCEL'.
      CALL METHOD o_event_receiver->reset.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDFORM.                    "user_command
*&      Form switch_edit_mode
      text
FORM switch_edit_mode.
IF g_grid->is_ready_for_input( ) EQ 0.
set edit enabled cells ready for input
    CALL METHOD g_grid->set_ready_for_input
      EXPORTING
        i_ready_for_input = 1.
ELSE.
lock edit enabled cells against input
    CALL METHOD g_grid->set_ready_for_input
      EXPORTING
        i_ready_for_input = 0.
ENDIF.
ENDFORM.                    "switch_edit_mode

How can I Generate two different reports from single execution of Test cases in NI teststand

Hi,
My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
Solved!
Go to Solution.

Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property.
Also, be aware that step's post-expression is not executed in case of error in the step.
Sergey Kolbunov
CLA, CTD
Attachments:
SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

Concatenate columns from two different reports

In OBIEE 11g report, I am looking for a method to concatenate columns from two different reports.
My requirement is, if I show 'Units Produced' for customer A, I need to show another column 'Units Produced' for a related customer B.
Every customer has one related customer.
So my report shows all the data for customer A, but I need to add one column which is for custome B , so I am looking a way to concatenate columns or if some other way this can be done

Customer A is dimension table. You mapped to fact to get Customer A details.
Now you want for Customer B. Now create one more alias table for Customer and name it as customer B and join with Fact on Customer B keys and use it.
Each customer has related customer.
2 dimension tables one for customer and other for related customer.

How to display two different parts of one image in two windows?

hi everyone:) i need to display two different parts of one image in two windows. i have problem with displaying :/ because after creating windows there aren't any images :( i supose my initialization code of creating windows is incomplete, maybe i miss something or maybe there is some inconistency. graphics in java is not my strong position. complete code is below. can anybody help me?
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.io.*;
import javax.imageio.*;
import javax.swing.*;
import java.util.*;
class ImgFrame extends JFrame
       private BufferedImage img;
       ImgFrame(BufferedImage B_Img, int x, int y, int w, int h)
               super("d");
               img=new BufferedImage(w,h,BufferedImage.TYPE_INT_RGB);
               img=B_Img.getSubimage(x, y, w, h);
       }//end ImgFrame construction
       public void paint(Graphics g)
               Graphics2D g2D = (Graphics2D)g;
               g.drawImage(img, 8, 8, null);
       }//end paint method
       public Dimension getPrefferedSize()
               if(img==null)
                       return(new Dimension(100,100));
               else
                       return(new Dimension(img.getWidth(null),img.getHeight(null)));
       }//end of GetPrefferedSize method
}//end ImgFrame class
public class TestGraph2D_03 extends Component
       static BufferedImage IMG;
       public static void Load()
               try
                       IMG=ImageIO.read(new File("c:/test.bmp"));
               catch(IOException ioe)
                       System.out.println("an exception: "+ioe);
               }//end try catch
       }//end TestGraph2D_03 construction
       public static void main(String[] args)
               Load();
               ImgFrame F1 = new ImgFrame(IMG, 0, 0, 8, 8);
               ImgFrame F2 = new ImgFrame(IMG, 8, 8, 8, 8);
               F1.addWindowListener(new WindowAdapter()
                       public void windowClosing(WindowEvent e)
                               System.exit(0);
               F1.pack();
               F1.setVisible(true);
               F2.addWindowListener(new WindowAdapter()
                       public void windowClosing(WindowEvent e)
                               System.exit(0);
               F2.pack();
               F2.setVisible(true);
       }//end of main method in TestGraph2D_01 class
}//end of TestGraph2D_03 class

Never override the paint(...) method of a Swing component.
If you have a sub image then add the image to a JLabel and add the label to the GUI. No need for custom painting.

JComboBox display two different lists

I have a JComboBox in a JTable column. The requirement is that the JComboBox displays two different lists based upon which mouse button is clicked on the JComboBox. i.e When user clicks on mouse Button1 the JComboBox should popup with a list of products(user default products). But, when the user clicks on mouse Button2 the JComboBox should popup with a different list of products(all the products).
Any help will be appreciated,
Thanks in advance!

UNDEBUGGED, UNTESTED, OFF THE CUFF CODE
public class myEditor extends AbstractCellEditor implements TableCellEditor {
private int sel = 0;
private String[][] str = {{"Option 1", "Option 2", "Option 3"},
                        {"Select 1", "Select 2", "Select 3"}};
private JComboBox[] fieldCombos = new JComboBox[str.length];
private DefaultCellEditor[] fieldEditors = new DefaultCellEditor[str.length];
public myEditor() {
    for (int i=0; i<fieldEditors.length; i++) {
      fieldCombos[i] = new JComboBox();
      for (int j=0; j<str[0].length; j++) {
        fieldCombos.addItem(str[0][j]);
fieldEditors[i] = new DefaultCellEditor(fieldCombos[i]);
public Component getTableCellEditorComponent(JTable table, Object value,
          boolean isSelected, int row, int column) {
fieldCombos[sel].setSelectedItem(value);
return fieldEditors[sel];
public void setSelector(int Selector) {
if (Selector>=0 && Selector<str.length) sel=Selector;

To compare two different reports

Hi!
Iu2019ve just started in a new work and I have an important task to do. So, I need to know if there is
some method to compare two reports. Let me explain:
We receive reports from Oracle and from SQL Server: two different reports with the same information. I need to compare them in order to know if the information exactly is the same or not.
Does someone know any tool to do that or do I have to revise each one by hand?

May beu2026 Business Object u2013 Crystal Reports can explain us how is a report built and how we can find the u201Cdata sourcesu201D. If it can beu2026 I will be able to make a program to compare the u201Cdata fieldsu201D in two, three, four,u2026 reports.
It will be very useful to compare if two reports have the same u201Cdata fieldsu201D or, two directories have the same number of reports and everyone in the first folder have the consequent in the second folder.
Of course, when I talking about folders, Iu2019m want to say two folders who contains reports but each folder have reports linked to different DBMS (Oracle, SQL Server,u2026).
Edited by: Carles Hernández on Jan 13, 2009 5:03 PM
Edited by: Carles Hernández on Jan 13, 2009 5:05 PM

How to Display two different objects in a single table header in Cross Tab?

i All,
I've a reqiurement for a Cross Tab Report like I need two different objects that should be displayed side-by-side, one object's values after another in a single header. In the picture below I've shown the objects separately in two rows, top header having BSNLNL,MTNLNL,RCOMNL and Header-2 having AIRTIL,RCOMIL. But requirements needs to be showing like this,
BSNLNL
MTNLNL
RCOMNL
AIRTIL
RCOMIL
Actually, the data for the header comes from a single object called Operator. I've show the Operators name ending with NL and after that names ending with IL. So, i've separated the data into two variables using the below formulae.
IL:
=[Billing Operator]
Where
Match([Billing Operator];"*IL")=1
NL:
=[Billing Operator]
Where
Match([Billing Operator];"*NL")=1
Also, the NL data should start first and after the NL data's last value ends, the IL data should begin.
One more thing is that I've to show '0' for null values. So i've used the below formulae on the column data. You can see below that except the "Outgoing ILD Mins in the month from Mobile Network" everything else showing fine. I don't understand why.
=If
Substr([Franchise];3;1)="M"
Then
   [Mobile Outgoing Charged Usage Minutes]
   Else
   0
I tried different approaches but couldn't find a solution. Could you please help me?
I'm using BO WebI 4.1 SP1
Regards,
Naren Vema.

Hi Naren,
No need to split Billing Operator object. Create a variable-
V_IL_NL= If Match([Billing Operator];"*IL")=1 Then "IL" ElseIf Match([Billing Operator];"*NL")=1 Then "NL"
1) Put V_IL_NL variable below Billing Operator object header.
2) Sort and create break on this variable.
3) Delete Footer column. it will automatically create when you apply break.
4) Hide V_IL_NL variable from this header.
~Anuj

Display two different column types in cross tab

I am using Cross Tab template in crystal XI and I have to show two different column types one is of type int and other is of type string. Below is the format of the report
                              AmountGiven             Amount Spent            Attended
Mike                       5000                              3000                         Yes
Steve                     200                                 200                           No
Is there a way I can do this showing "yes" or "no" in the third column???
Thanks...

Hi
If you are trying to show "yes" or "no" for a column value in a cross tab, then yes we can try using a formula for it.
I would suggest you 2 ways that you can try at your end:
1.
a) Create a formula in the cross tab expert and write your condition.
for eg: if Sum({Orders.Order amount}) > 5000 then "yes" else "no"
b) Then select that formula in the summarized fields in cross tab expert and change the summary to MODE.
c) You can see the "yes" and "no" Within the same box.
2.
a) Add a field to the colums in the cross tab expert.
b) A column gets inserted in the cross tab.
c) Right click the field and select format field.
d) Go to Common tab and write a formula for the display string.
e) Write the condition in that formula.
f) You can see a new column with the expected values.
Hope this helps you..
Please revert incase of any queries.
Regards
Pradeep Hulke

How to display two different hierarchical sequential lists in one o/p scree

Hi Gurus,
I have a requirement for displaying two hierarchical lists in one output screen. I have created my hierarchical sequential lists using
function module : - 'REUSE_ALV_HIERSEQ_LIST_DISPLAY', but i dont know how to append my second hierarchical sequential list
into this.
Will it be easily possible through OO ABAP where i will have two containers at the screen and each container will display one hierarchical sequential list at the output screen. But i have no idea how to do this through OO ABAP.
Please help...
Thanks,
Bhupender

i want to display the records corresponding to the user details enterd
in Text Fields in the same Frame by replacintg the previous display..1) Quit multi-posting.
2) You where given an answer in your last posting on the topic.
3) The code isn't formatted so don't expect us to read the code.

Play two different instruments together?

hi all,
is it possible to play/record two different instuments (MIDI) at the same time in Logic?
i have a Keystation 49e (keyboard) and a padKontrol (drum pads) setup (both MIDI via USB).
ideally, two people could play both instruments and be heard or recorded. i know this is not possible in Garageband, which is why i am trying to switch into the Logic mode.
any suggestions

I haven't tried recording two or more players on different synths at the same time, but I have played & recorded up to six different synths simultaneously. To do this, I set each string on my guitar to a different instrument. The only hard part was remembering to arm all the tracks before starting to record.
guitarguru

Display two main reports in one

Post Author: BSong
CA Forum: Crystal Reports
I am try to display both Customer Invoice and Payment reports in one report for a chosen Customer. Since neither Invoice nor Payment should be sub report, how do I combine them together in one report two sections? Is this possible? I am pretty new working with Crystal Report. Could anyone help me on this?
Thanks,Bill

Post Author: BSong
CA Forum: Crystal Reports
Thanks for your replay.
But how do I link the two if they use two separate datasource? and each has its own prompt. Could you explain.
Thanks,Bill

Project Web App (PWA)/Sharepoint 2013: is there any way to display two different views of the Project Center PWA web part to the same user in a site collection?

i want some of my users to see all the projects in the Project Center at my top-level site, and those same users to see only the projects they own at a subsite level in Project Center. that way they could see an 'all project' view on the homepage and only
their projects on their dashboard pages (which also have an instance of Project Center web part on them). i have searched and searched but cannot find a solution to this. is there any way to acheive this functionality? thanks in advance for your assistance!

I have tried this in the past, but was not successful, as far as I can recall. Once you access the project center webpart in one page, the view will be retained regardless where you see it again. (until you apply a different view or clear your browser cache).
May be an easier solution is to display a 'report' on the home page with ALL projects (much easier to do), and use the Project Center webpart for the My projects view as it is easier to achieve via Project Server Security, than a report.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

How to use two different report items in SSRS page header

Hi All,
Can we use more than one report item in SSRS 2008 R2 page header...
Like this in expression..
=IIF(Globals!PageNumber=1,ReportItems!Col1.Value,ReportItems!Col2.Value)
Whenever Globals!PageNumber=1 I want to show values present in Col1 and when Globals!PageNumber<>1 then show values present in col2
Also let know if any other work around is there to meet above criteria...
Thanks,
RH
sql

Hi RH,
Based on my research, a text box in the page header can only refer to the ReportItems built-in collection once in an expression. So if we directly use the expression in the page header, we can receive the error message that “The Value expression for textrun’’
refer to more than one report item. An expression in a page header or footer can refer to only one report item”.
To work around the issue, we can add two text boxes to the page header: one for the textbox col1 value (=ReportItems!Col1.Value), another for the textbox col2 value (=ReportItems!Col2.Value). Then use the expressions as below to control the visibility of
those textboxes:
=iif(Globals!PageNumber=1,false,true)
=iif(Globals!PageNumber<>1,false,true)
Please note that only text boxes on the current page are available as a member of the ReportItems collection in a page header or page footer section. For example, if ReportItems!textbox_name.Value refers to a text box that only appears on the first page
for a multipage data region, we cannot see a value on other pages except the first page.
Reference:
Using the ReportItems Collection References (Report Builder 3.0 and SSRS)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to process reports with two different date fields

Morning all,
This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
These two reports pull data from two different date fields and has different status check ups.
Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
Any ideas how to produce combined report which has two different date fields?
Many thanks in advance
Regards
Jehanzeb
What I

Charliy,
No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
So its more like this:
Klab->Max-Credit2--->Credit_date
Sae->Maxmast->Order_header---Date entered.
two dates totally different tables, dbs
however, I will try your idea too and see if that works.
Regards
Jehanzeb

Display two Different reports together

Similar Messages

Maybe you are looking for