Concatenate columns from two different reports

In OBIEE 11g report, I am looking for a method to concatenate columns from two different reports.
My requirement is, if I show 'Units Produced' for customer A, I need to show another column 'Units Produced' for a related customer B.
Every customer has one related customer.
So my report shows all the data for customer A, but I need to add one column which is for custome B , so I am looking a way to concatenate columns or if some other way this can be done

Customer A is dimension table. You mapped to fact to get Customer A details.
Now you want for Customer B. Now create one more alias table for Customer and name it as customer B and join with Fact on Customer B keys and use it.
Each customer has related customer.
2 dimension tables one for customer and other for related customer.

Similar Messages

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

Sum two different columns from two different tables

Can you select and sum two different columns, from two different tables in the same sql statement?
i.e.
table1
Item----OnHand_Qty
A--------10
A--------15
B--------10
B--------10
C--------20
table2
Item----Trx_Qty
A--------2
A--------4
A--------6
B--------1
B--------1
C--------4
I'm looking for the following results from a query
Item----Sum(Onhand_Qty)---Sum(Trx_Qty)
A--------25

Like this?
SQL> create table table1 (item,onhand_qty)
2 as
3 select 'A', 10 from dual union all
4 select 'A', 15 from dual union all
5 select 'B', 10 from dual union all
6 select 'B', 10 from dual union all
7 select 'C', 20 from dual union all
8 select 'D', 30 from dual
9 /
Tabel is aangemaakt.
SQL> create table table2 (item, trx_qty)
2 as
3 select 'A', 2 from dual union all
4 select 'A', 4 from dual union all
5 select 'A', 6 from dual union all
6 select 'B', 1 from dual union all
7 select 'B', 1 from dual union all
8 select 'C', 4 from dual union all
9 select 'E', 3 from dual
10 /
Tabel is aangemaakt.
SQL> select nvl(t1.item,t2.item) item
2       , t1.sum_onhand_qty
3       , t2.sum_trx_qty
4    from ( select item, sum(onhand_qty) sum_onhand_qty
5             from table1
6            group by item
7         ) t1
8         full outer join
9         ( select item, sum(trx_qty) sum_trx_qty
10             from table2
11            group by item
12         ) t2
13         on (t1.item = t2.item)
14 /
I SUM_ONHAND_QTY SUM_TRX_QTY
A             25          12
B             20           2
C             20           4
E                          3
D             30
5 rijen zijn geselecteerd.Regards,
Rob.

Discoverer columns from two different sheets

Hi,
Is it possible in discoverer to bring columns from a different sheet into another sheet? I have a few columns on sheet2, which have a different condition and sheet1 has different conditions. The sheets 1 and 2 can be linked on their emplid. Is there a way to combine the columns??
Any help is greatly appreciated.
Thanks!

Hi,
I am using decode to try and get the column with the condition into the first sheet.
For example:
In my first sheet, I select emplid, empl_no, area_cde, avg_eqty from table a.
I also want the following from table a:
1) count rec_id where a_cde in (1,2,3)
2) count rec_id where a_cde in (1,2,3) and product_cde = 1 and discnt = 1
When I use decode, and select the columns, I say,
calc1:
decode(a_cde,1,1,2,1,3,1) --> seperating a codes 1,2,3 and the rest of them.
calc2:
and then I calculate another item --> case when calc1 = 1 then count(rec_id) else NULL end
When I do the above, I get one row as expected.
However, when I try to incorporate 2), I created another calculation:
calc3:
case when calc1 = 1 and product_cde = 1 and discnt = 1 then count(rec_id)
As soon as I add this calc to my report, I get 2 rows returned, because, the Avg_discnt column (just the col selected from the table, not a calc), has a discnt = 1 associated with it, and I get two rows instead of one row.
Please let me know if posting the SQL generated by discoverer would be more clearer.
Thanks for your inputs!
Edited by: spriya on Apr 6, 2010 2:16 PM

Contatenation of columns from two different tables

Hi everyone
i have one table in following desc
table-1
str q4_currrent Q4_target
prd 500 1000
Table-2
q3_currrent Q4_target
345 1000
Table-3
percentage
50
I want the result in this format---
str q4_currrent Q4_target q3_currrent Q4_target percentage
prd 500 1000 345 1000 50
Can anyone help me how can i get this result? I want this to be done only with
query not with any procedure or function.
if you hav any query to concatenate the different tables please suggest.
thanks.
-Anand

hi
thw solution which you have given that is giving the
cartesian product of all the rows of the all the 3
tables.
1st table-7 rows
2nd table-7 rows
3rd table-7 rows
total rows in result table- 343 rows.
So its not working well..
thanks for ur response.What part of
You might also want a WHERE clause if the tables have more than one row in.did you have a problem with? You provided no information on which any of us could have written a join condition. I assumed you either had only the one row you showed us, or you were planning on coding the join yourself.

How can I Generate two different reports from single execution of Test cases in NI teststand

Hi,
My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
Solved!
Go to Solution.

Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property.
Also, be aware that step's post-expression is not executed in case of error in the step.
Sergey Kolbunov
CLA, CTD
Attachments:
SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

Report which reads data from two different systems

Hi experts!
By any chance, would be possible to create a report which is able to read from two different cubes and two different systems at the same time?
Kind regards.

Good afternoon Raul,
It should be possible to create a multiprovider on the two different cubes from the two sources
systems and report on this.
Best Regards,
Des

Getting DISTINCT count from two different columns

Hi all,
I have following query which gives currency code from two different tables. I would like to get the distinct count of currency codes from these two different columns.
SELECT eb.person_seq_id, eb.bonus_amount, eb.currency_cd, ed.currency_cd_host
FROM fr_emp_bonuses eb, fr_emp_details ed, fr_periods p
WHERE eb.person_seq_id = ed.person_seq_id AND ed.period_seq_id = eb.period_seq_id
AND ed.period_seq_id = p.period_seq_id AND p.period_status = 'CURRENT'
AND eb.bonus_amount >= 0 AND eb.person_seq_id = 3525125;
This query gives following result
3525125     240000     USD     INR
3525125     0      USD     INR
3525125     60000      USD     INR
3525125     50000      USD     INR
There are two distinct currency codes (USD, INR) and total amount is 350000. So I am looking for a query to give me the following result
3525125     350000 2
Thanks in advance

Hi,
Here's one way:
WITH     original_query     AS
     SELECT eb.person_seq_id
     ,     eb.bonus_amount
     ,     eb.currency_cd
     ,     ed.currency_cd_host
     FROM     fr_emp_bonuses         eb
     ,     fr_emp_details          ed
     ,     fr_periods          p
     WHERE      eb.person_seq_id    = ed.person_seq_id
     AND      ed.period_seq_id    = eb.period_seq_id
     AND      ed.period_seq_id    = p.period_seq_id
     AND      p.period_status         = 'CURRENT'
     AND      eb.bonus_amount     >= 0
     AND     eb.person_seq_id    = 3525125
,     unpivoted_data     AS
     SELECT     person_seq_id
     ,     bonus_amount
     ,     currency_cd
     FROM     original_query
    UNION ALL
        SELECT person_seq_id
     ,     0               AS bonus_amount
     ,     currency_cd_host     AS currency_cd
     FROM     original_query
SELECT       person_seq_id
,       SUM (bonus_amount)          AS total_bonus_amount
,       COUNT (DISTINCT currency_cd)     AS distinct_currency_cds
FROM       unpivoted_data
GROUP BY person_seq_id
;There may be a shorter, more efficient way to get the same results, but without knowing more about your tables, I can't tell.
The tricky thing is getting two columns (currency_cd and currencuy_cd_host in this case) counted together. You can't simply say
COUNT (DISTINCT eb.currency_cd) +
COUNT (DISTINCT ed.currency_code_host)That happens to get the correct result with the sample data you posted, but what if you had data like thEe following?
currency_cd     currency_cd_host
INR          USD
USD          INRHere, the count of distinct currency_cds is 2, and the count of distinct currency_cd_hsots is also 2. Does that mean the grand total is 2 + 2 = 4? No, the 2 codes in one column arte the same 2 codes as in the other column. We need to get both currency_cd and currency_cd_hsot into the same column, and then do COUNT (DISTINCT ...) on that combined column. A UNION, as shown above, will certainly do that, starting with your query as you posted it. The query you posted isn't necessarily the best frist step towards this result, however, so there may be a much better approach, depending on your tables.
Edited by: Frank Kulash on Feb 1, 2012 6:21 PM
Here's a slightly shorter, and probably more efficient way to get the same results:
WITH     cntr     AS
     SELECT     LEVEL     AS n
     FROM     dual
     CONNECT BY     LEVEL     <= 2
SELECT       eb.person_seq_id
,       SUM (eb.bonus_amount)          AS total-amount
,       COUNT ( DISTINCT CASE
                    WHEN c.n = 1
                    THEN eb.currency_cd
                    ELSE ed.currency_cd_host
                  END
          )               AS distinct_currency_cds
FROM       fr_emp_bonuses    eb
,       fr_emp_details    ed
,       fr_periods          p
,       cntr              c
WHERE        eb.person_seq_id = ed.person_seq_id
AND        ed.period_seq_id = eb.period_seq_id
AND        ed.period_seq_id = p.period_seq_id
AND        p.period_status   = 'CURRENT'
AND        eb.bonus_amount   >= 0
AND       eb.person_seq_i   = 3525125
--       NOTE: no join condition involving c; we really do want a cross-join
GROUP BY eb.person_seq_id
;

ALV Report to have two different Reports

Hi All,
I have a need to display two different reports for the same set of data selections, (Successful data and Error Data) in a Single ALV Layout using a Application tool bar Button. Does anyone have a sample code for this kind of requirement. Preferably using Objects.
Also, how can we check if an object is already created? In other words, how to check for a null reference?
Thanks in advance.
Jr.

Sample code for split alv using OOABAP.
this would help you in ur requirement.
go through this program where the screen is divided in two for two alv in different containers.
DATA: save_ok LIKE sy-ucomm,
      g_container TYPE scrfname VALUE 'CC1',
      g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      g_max TYPE i VALUE 100.
declarations for top of page event
Data: gv_c_split type ref to cl_gui_splitter_container,
       gv_c_ptv type ref to cl_gui_container,
       gv_alv_ptv type ref to cl_gui_alv_grid,
       o_dd_doc TYPE REF TO cl_dd_document,
       text TYPE sdydo_text_element,
       o_split type ref to cl_gui_easy_splitter_container,
       o_top type ref to cl_gui_container,
       o_bot type ref to cl_gui_container,
       gv_c_vp type ref to cl_gui_container.
end of declaration for top of page.
CLASS lcl_event_receiver DEFINITION DEFERRED.
*class lcl_application_dc definition deferred.
DATA: o_event_receiver TYPE REF TO lcl_event_receiver.
     g_dc type ref to lcl_application_dc.
DATA: gt_outtab TYPE TABLE OF sbook.
      CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS: handle_f4 FOR EVENT onf4 OF cl_gui_alv_grid
               IMPORTING e_fieldname
                         es_row_no
                         er_event_data
                         et_bad_cells
                         e_display,
            handle_top_of_page FOR EVENT top_of_page OF cl_gui_alv_grid
               IMPORTING e_dyndoc_id.
    METHODS: reset.
    METHODS: show_f4.
PRIVATE SECTION.
attributes for creating an own F4-Help
(using a second ALV Grid Control
    DATA: f4_grid TYPE REF TO cl_gui_alv_grid,
          f4_custom_container TYPE REF TO cl_gui_custom_container.
    TYPES: BEGIN OF ty_f4.
    TYPES: value TYPE s_class.
    TYPES: descr(20) TYPE c.
    TYPES: END OF ty_f4.
    DATA: f4_itab TYPE TABLE OF ty_f4.
    DATA: f4_fieldcatalog TYPE lvc_t_fcat.
attributes to store event parameters
(after the CALL SCREEN command, the event parameters
are not accessible)
    TYPES: BEGIN OF onf4_event_parameters_type.
    TYPES: c_fieldname     TYPE lvc_fname.
    TYPES: cs_row_no       TYPE lvc_s_roid.
    TYPES: cr_event_data   TYPE REF TO cl_alv_event_data.
    TYPES: ct_bad_cells    TYPE lvc_t_modi.
    TYPES: c_display       TYPE char01.
    TYPES: END OF onf4_event_parameters_type.
    DATA: f4_params TYPE onf4_event_parameters_type.
Methods to create own F4-Help
(This is done using a second ALV Grid Control)
    METHODS: init_f4.
    METHODS: build_fieldcatalog.
    METHODS: fill_f4_itab .
    METHODS: on_double_click FOR EVENT double_click OF cl_gui_alv_grid
                    IMPORTING es_row_no.
ENDCLASS.                    "lcl_application_f4 DEFINITION
      CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
*§2. Implement an event handler method for event ONF4.
METHOD handle_f4.
Save event parameter as global attributes of this class
(maybe solved differently if you use a function module!)
    f4_params-c_fieldname = e_fieldname.
    f4_params-cs_row_no = es_row_no.
    f4_params-cr_event_data = er_event_data.
    f4_params-ct_bad_cells = et_bad_cells.
    f4_params-c_display = e_display.
*§3. Call your own f4 help. To customize your popup check
   first if the cell is ready for input (event parameter E_DISPLAY).
(parameter E_DISPLAY is checked later in method on_double_click)
(Probably, you would call a function module at this point,
pass the needed event parameter and call the popup screen
within that function module. This is not done in this example
to avoid scattering its code).
    CALL SCREEN 101 STARTING AT 10 10.
*§7. Inform the ALV Grid Control that an own f4 help has been processed
   to suppress the standard f4 help.
    er_event_data->m_event_handled = 'X'.
ENDMETHOD.                                                "on_f4
METHOD show_f4.
   DATA: ls_outtab TYPE sbook.
initialize own f4 help if needed
    IF f4_custom_container IS INITIAL.
      CALL METHOD init_f4.
    ENDIF.
    CALL METHOD fill_f4_itab.
refresh list of values in f4 help and show it
    CALL METHOD f4_grid->refresh_table_display.
CAUTION: Do not use method REFRESH_TABLE_DISPLAY for
your editable ALV Grid instances while handling events
DATA_CHANGED or ONf4. You would overwrite intermediate
values of your output table on frontend.
'f4_grid' is a non-editable ALV Grid Control for the
application specific F4-Help. Therefore, calling
REFRESH_TABLE_DISPLAY for this instance has no
negative effect.
    CALL METHOD cl_gui_cfw=>flush.
ENDMETHOD.                                                "show_f4
METHOD init_f4.
    DATA: ls_f4_layout TYPE lvc_s_layo.
build fieldcatalog entries for f4
    CALL METHOD build_fieldcatalog.
create controls
    CREATE OBJECT f4_custom_container
              EXPORTING container_name = 'CC_ONF4'.
    CREATE OBJECT f4_grid
              EXPORTING i_parent = f4_custom_container.
hide toolbar
    ls_f4_layout-no_toolbar = 'X'.
    CALL METHOD f4_grid->set_table_for_first_display
      EXPORTING
        is_layout       = ls_f4_layout
      CHANGING
        it_fieldcatalog = f4_fieldcatalog
        it_outtab       = f4_itab.
register event double click on backend
    SET HANDLER me->on_double_click FOR f4_grid.
flush since 'ls_layout' is local!
    CALL METHOD cl_gui_cfw=>flush.
ENDMETHOD.                                                "init_f4
METHOD fill_f4_itab.
    DATA ls_f4_itab TYPE ty_f4.
Delete all entries in f4_itab to determine
offered values dynamically
    CLEAR f4_itab[].
    ls_f4_itab-value = 'C'.
    ls_f4_itab-descr = text-t03. "Business Class
    APPEND ls_f4_itab TO f4_itab.
    ls_f4_itab-value = 'Y'.
    ls_f4_itab-descr = text-t04. "Economie Class
    APPEND ls_f4_itab TO f4_itab.
    ls_f4_itab-value = 'F'.
    ls_f4_itab-descr = text-t05. "First Class
    APPEND ls_f4_itab TO f4_itab.
ENDMETHOD.                    "fill_f4_itab
METHOD build_fieldcatalog.
    DATA: ls_fcat TYPE lvc_s_fcat.
    CLEAR ls_fcat.
    ls_fcat-fieldname = 'VALUE'.
    ls_fcat-coltext = text-t02.
   ls_fcat-inttype = 'S_CLASS'.
    ls_fcat-outputlen = 5.
    APPEND ls_fcat TO f4_fieldcatalog.
    CLEAR ls_fcat.
    ls_fcat-fieldname = 'DESCR'.
    ls_fcat-coltext = text-t01.
    ls_fcat-inttype = 'C'.
    ls_fcat-outputlen = 20.
    APPEND ls_fcat TO f4_fieldcatalog.
ENDMETHOD.                    "build_fieldcatalog
METHOD on_double_click.
*§5. If not already caught by your own f4 help, check whether
   the triggered cell was ready for input by using E_DISPLAY
   and if not, exit.
    IF f4_params-c_display EQ 'X'.
      LEAVE SCREEN.
    ENDIF.
*§6. After the user selected a value, pass it to the ALV Grid Control:
*§ 6a. Define a field symbol of type: LVC_T_MODI and a structure of
      type LVC_S_MODI to pass the value later on.
    FIELD-SYMBOLS TYPE lvc_t_modi.
    DATA: ls_modi TYPE lvc_s_modi,
          ls_f4_itab TYPE ty_f4.
*§ 6b. Dereference attribute M_DATA into your field symbol and add
      the selected value to the table to which this symbol points to.
    ASSIGN f4_params-cr_event_data->m_data->* TO .
    LEAVE TO SCREEN 0.
ENDMETHOD.                    "on_double_click
METHOD reset.
    FIELD-SYMBOLS display_document
             EXPORTING parent = o_top.
ENDMETHOD.                    "handle_top_of_page
ENDCLASS.                    "lcl_application_f4 IMPLEMENTATION
END-OF-SELECTION.
CALL SCREEN 100.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
    PERFORM create_and_init_alv CHANGING gt_outtab[]
                                         gt_fieldcat.
ENDIF.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
save_ok = sy-ucomm.
CLEAR sy-ucomm.
CASE save_ok.
    WHEN 'EXIT' OR 'BACK' OR 'CANCEL'.
      PERFORM exit_program.
    WHEN 'SWITCH'.
      PERFORM switch_edit_mode.
    WHEN OTHERS.
    do nothing
ENDCASE.
ENDMODULE.                    "pai INPUT
      FORM EXIT_PROGRAM                                             *
FORM exit_program.
LEAVE PROGRAM.
ENDFORM.                    "exit_program
*&      Form build_fieldcat
      text
     -->PT_FIELDCAT text
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'SBOOK'
    CHANGING
      ct_fieldcat      = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
Exchange smoker field with invoice field - just to
make the dependance between SMOKER and CLASS more transparent
(Smoking is only allowed in the first class).
    IF ls_fcat-fieldname EQ 'SMOKER'.
      ls_fcat-col_pos = 11.
      ls_fcat-outputlen = 10.
      ls_fcat-edit = 'X'.
Field 'checktable' is set to avoid shortdumps that are caused
by inconsistend data in check tables. You may comment this out
when the test data of the flight model is consistent in your system.
      ls_fcat-checktable = '!'.        "do not check foreign keys
      MODIFY pt_fieldcat FROM ls_fcat.
    ELSEIF ls_fcat-fieldname EQ 'INVOICE'.
      ls_fcat-col_pos = 7.
      MODIFY pt_fieldcat FROM ls_fcat.
    ELSEIF    ls_fcat-fieldname EQ 'CLASS'.
      ls_fcat-edit = 'X'.
      ls_fcat-outputlen = 5.
      ls_fcat-checktable = '!'.        "do not check foreign keys
      MODIFY pt_fieldcat FROM ls_fcat.
    ENDIF.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form create_and_init_alv
      text
     -->PT_OUTTAB    text
     -->PT_FIELDCAT text
FORM create_and_init_alv CHANGING pt_outtab TYPE STANDARD TABLE
                                  pt_fieldcat TYPE lvc_t_fcat.
DATA: lt_exclude TYPE ui_functions,
        ls_layout TYPE lvc_s_layo.
CREATE OBJECT g_custom_container
          EXPORTING container_name = g_container.
CREATE OBJECT g_grid
        EXPORTING i_parent = g_custom_container.
CREATE OBJECT gv_c_split
     EXPORTING
      link_dynnr        = lv_dynnr
      link_repid        = lv_repid
      parent            = g_custom_container
      rows              = 2
      columns           = 1
     EXCEPTIONS
       cntl_error        = 1
       cntl_system_error = 2
       others            = 3    .
CALL METHOD gv_c_split->set_border
   EXPORTING
     border            = space.
CALL METHOD gv_c_split->get_container
     EXPORTING
       row       = 1
       column    = 1
     RECEIVING
       container = gv_c_ptv.
CALL METHOD gv_c_split->set_row_height
    EXPORTING
      id                = 1
      height            = 20
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 6 .
CALL METHOD gv_c_split->get_container
     EXPORTING
       row       = 2
       column    = 1
     RECEIVING
       container = gv_c_vp .
CALL METHOD gv_c_split->set_row_height
    EXPORTING
      id                = 2
      height            = 10
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3 .
   CREATE OBJECT o_split
     EXPORTING
      parent            = gv_c_ptv
      with_border       = 1
     EXCEPTIONS
       cntl_error        = 1
       cntl_system_error = 2
       others            = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
o_top = o_split->top_left_container.
o_bot = o_split->bottom_right_container.
CREATE OBJECT gv_alv_ptv
     EXPORTING
       i_parent          = o_bot
     EXCEPTIONS
       error_cntl_create = 1
       error_cntl_init   = 2
       error_cntl_link   = 3
       error_dp_create   = 4
       others            = 5    .
CREATE OBJECT g_grid
        EXPORTING
          i_parent          = gv_c_vp
        EXCEPTIONS
          error_cntl_create = 1
          error_cntl_init   = 2
          error_cntl_link   = 3
          error_dp_create   = 4
          others            = 5    .
PERFORM build_fieldcat CHANGING pt_fieldcat.
Optionally restrict generic functions to 'change only'.
(The user shall not be able to add new lines).
PERFORM exclude_tb_functions CHANGING lt_exclude.
PERFORM build_data CHANGING pt_outtab.
ls_layout-grid_title = 'F4 help implemented for field CLASS'.
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_top_of_page FOR gv_alv_ptv.
SET HANDLER o_event_receiver->handle_top_of_page FOR g_grid.
CREATE OBJECT o_dd_doc EXPORTING style = 'ALV_GRID'
                                   no_margins = 'X'.
CALL METHOD gv_alv_ptv->set_table_for_first_display
   EXPORTING
     is_layout                    = ls_layout
CHANGING
    it_outtab                     = pt_outtab[]
    it_fieldcatalog               = pt_fieldcat
EXCEPTIONS
    invalid_parameter_combination = 1
    program_error                 = 2
    too_many_lines                = 3
    OTHERS                        = 4.
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      it_toolbar_excluding = lt_exclude
      is_layout            = ls_layout
    CHANGING
      it_fieldcatalog      = pt_fieldcat
      it_outtab            = pt_outtab[].
CALL METHOD gv_alv_ptv->list_processing_events
    EXPORTING
      i_event_name      = 'TOP_OF_PAGE'
       i_dyndoc_id       = o_dd_doc.
register f4 for field CLASS
PERFORM register_events.
Set editable cells to ready for input initially
CALL METHOD g_grid->set_ready_for_input
    EXPORTING
      i_ready_for_input = 1.
ENDFORM.                               "CREATE_AND_INIT_ALV
*&      Form exclude_tb_functions
      text
     -->PT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
Only allow to change data not to create new entries (exclude
generic functions).
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
APPEND ls_exclude TO pt_exclude.
ENDFORM.                               " EXCLUDE_TB_FUNCTIONS
*&      Form build_data
      text
--> p1        text
<-- p2        text
FORM build_data CHANGING pt_outtab TYPE STANDARD TABLE.
DATA: ls_sbook TYPE sbook,
        l_index TYPE i.
SELECT * FROM sbook INTO TABLE gt_outtab UP TO g_max ROWS.
IF sy-subrc NE 0.
    PERFORM generate_entries CHANGING pt_outtab.
ENDIF.
LOOP AT pt_outtab INTO ls_sbook.
    l_index = sy-tabix.
    CLEAR ls_sbook-class.
Alternate between smoker and non smoker to make
it more obvious what this example is about
    l_index = l_index MOD 2.
    IF l_index EQ 1.
      ls_sbook-smoker = 'X'.
    ELSE.
      ls_sbook-smoker = ' '.
    ENDIF.
    MODIFY pt_outtab FROM ls_sbook.
ENDLOOP.
ENDFORM.                               " build_data
*&      Form generate_entries
      text
     -->PT_SBOOK   text
FORM generate_entries CHANGING pt_sbook TYPE STANDARD TABLE.
DATA: ls_sbook TYPE sbook,
        l_month(2) TYPE c,
        l_day(2) TYPE c,
        l_date(8) TYPE c,
     l_prebookid TYPE i.
ls_sbook-carrid = 'LH'.
ls_sbook-connid = '0400'.
ls_sbook-forcurkey = 'DEM'.
ls_sbook-loccurkey = 'USD'.
ls_sbook-custtype = 'B'.
DO 110 TIMES.
    l_prebookid = sy-index.
    ls_sbook-forcuram = sy-index * 10.
    ls_sbook-loccuram = ls_sbook-loccuram * 2.
    ls_sbook-customid = sy-index.
    ls_sbook-counter = 18.
    ls_sbook-agencynum = 11.
    l_month = sy-index / 10 + 1.
    DO 2 TIMES.
      l_day = 3 + l_month + sy-index * 2.
      l_date+0(4) = '2000'.
      l_date+4(2) = l_month.
      l_date+6(2) = l_day.
      ls_sbook-fldate = l_date.
      SUBTRACT 3 FROM l_day.
      ls_sbook-order_date+0(6) = l_date+0(6).
      ls_sbook-order_date+6(2) = l_day.
      ls_sbook-bookid = l_prebookid * 2 + sy-index.
      IF sy-index EQ 1.
        ls_sbook-smoker = 'X'.
      ELSE.
        ls_sbook-smoker = space.
      ENDIF.
      ls_sbook-luggweight = l_prebookid * 10.
      IF ls_sbook-luggweight GE 1000.
        ls_sbook-wunit = 'G'.
        ls_sbook-class = 'C'.
      ELSE.
        ls_sbook-wunit = 'KG'.
        ls_sbook-class = 'Y'.
      ENDIF.
      IF ls_sbook-bookid > 40 AND ls_sbook-wunit EQ 'KG'.
        ls_sbook-invoice = 'X'.
      ENDIF.
      IF ls_sbook-bookid EQ 2.
        ls_sbook-cancelled = 'X'.
        ls_sbook-class = 'F'.
      ENDIF.
      APPEND ls_sbook TO pt_sbook.
    ENDDO.
ENDDO.
ENDFORM.                               " generate_entries
*&      Form register_events
      text
FORM register_events.
*§1. Register event ONF4 at frontend using method
   register_f4_for_fields. For this purpose, you pass a table
   with all fields, for which you want to implement your own
   f4 help.
remark: If you want to use an own f4 help for fields where
        no standard f4 help exists set field F4AVAILABL for
        this field in the fieldcatalog.
DATA: lt_f4 TYPE lvc_t_f4 WITH HEADER LINE.
CLEAR lt_f4.
lt_f4-fieldname = 'CLASS'.
If you would like to deregister the field again,
pass value SPACE with field 'register'.
lt_f4-register = 'X'.
*§ 1b. If the value range in your f4 help depends on other
      values of cells that are input enabled, set the
      GETBEFORE parameter.
The consequence is that the ALV Grid Control raises
event DATA_CHANGED before the f4 help is called to
check values that the f4 help depends on.
lt_f4-getbefore = 'X'.
The next parameter is used to change values after onf4 has
been processed. The ALV Grid Control will raise
event DATA_CHANGED afterwards, if you set it.
lt_f4-chngeafter = space.
INSERT TABLE lt_f4.
CALL METHOD g_grid->register_f4_for_fields
    EXPORTING
      it_f4 = lt_f4[].
register events for abap objects (backend)
SET HANDLER o_event_receiver->handle_f4 FOR g_grid.
ENDFORM.                    " register_events
MODULE status_0101 OUTPUT
MODULE status_0101 OUTPUT.
SET PF-STATUS 'POPUP'.
SET TITLEBAR 'POPUP'.
CALL METHOD o_event_receiver->show_f4.
ENDMODULE.                 " STATUS_0101 OUTPUT
*&      Module USER_COMMAND_0101 INPUT
      text
MODULE user_command_0101 INPUT.
PERFORM user_command.
ENDMODULE.                 " USER_COMMAND_0101 INPUT
*&      Form user_command
      text
FORM user_command.
DATA: save_ok TYPE sy-ucomm.
save_ok = sy-ucomm.
CLEAR sy-ucomm.
CASE save_ok.
    WHEN 'CANCEL'.
      CALL METHOD o_event_receiver->reset.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDFORM.                    "user_command
*&      Form switch_edit_mode
      text
FORM switch_edit_mode.
IF g_grid->is_ready_for_input( ) EQ 0.
set edit enabled cells ready for input
    CALL METHOD g_grid->set_ready_for_input
      EXPORTING
        i_ready_for_input = 1.
ELSE.
lock edit enabled cells against input
    CALL METHOD g_grid->set_ready_for_input
      EXPORTING
        i_ready_for_input = 0.
ENDIF.
ENDFORM.                    "switch_edit_mode

APEX Application accessing data from two different databases

Hi All,
Currently as we all know that APEX Application resides in database and is connected to the schema of that database.
I want APEX Application to be running and accessing data from two different databases. Elaborating my question,
Currently, my APEX Production Application is connected with XXXX Schema of DB1 Database(Where APEX Resides). Now I want to add some pages into this APEX Application for REPORT Purpose, But I want to connect this REPORT APEX Pages to get data from Different Schema YYYY for Database DB2.
Is it possible to configure this scenario?
The reason for doing this is to avoid the REPORT related (adhoc queries) resource utilization effect on Production DB1 Database.
Thanks
Nil

1. If you do the joining of two or more tables in DB1 then all data is pulled over to DB1 and then the join is executed: so more data over the databaselink and more work for DB1. Better keep the joining stuff where the data resides and just pull exactly that data over that you need.
2. Don't know about your different block sizes. Seems a nice question for one of the other forums (DBA or SQL).
3. I mean create synonyms on DB1 for reports VIEWS in DB2.
Hope all is clear!

How to create a foreign key for the table from two different tables?

Hi All,
I have a three table like below. In the below table SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK will be having the primary key for NAME column. The same SAMPLE_CONS3_CHECK table also having the primary key for NAME column and forieign key for SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK tables. See the below code 2
code 1:
CREATE TABLE SAMPLE_CONS_CHECK
        (NAME VARCHAR2(10),
        SERIES VARCHAR2(5)
CREATE TABLE SAMPLE_CONS2_CHECK
        (NAME VARCHAR2(5),
         MODEL NUMBER
CREATE TABLE SAMPLE_CONS3_CHECK
        (NAME VARCHAR2(5),
         MODEL_NO NUMBER
        )code 2
alter table SAMPLE_CONS_CHECK
add constraint SAMPLE_CONS_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS2_CHECK
add constraint SAMPLE_CONS2_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS3_CHECK
add constraint SAMPLE_CONS3_CHECK_pk primary key (NAME)
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK1 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS_CHECK
    NAME
) ON DELETE CASCADE;
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK2 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS2_CHECK
    NAME
) ON DELETE CASCADE;From the above schenario i am able to insert the data to SAMPLE_CONS3_CHECK table. But the parent data is already available in the parent table. The problem is here two different constarints from two different tables. While inserting, it is checking from both the tables whether the parent is exist or not.
How can i solve this problem? Can anyone halp me about this?
Thanks
Edited by: orasuriya on Aug 8, 2009 2:02 AM

Actually the design is completely incorrect.
What you say is
I have
'foo', 'foo series'
'foo','foo model'
'foo',666
By virtue of table3 referring to both table1 and table2.
This means you actually need to have 1 (one) table:
'foo','foo series','foo model', 666
And the 'problem' disappears.
Sybrand Bakker
Senior Oracle DBA

How to create Analysis from two different subject areas with diff models

Hello,
I have problem with create analysis from two different areas with two different models (Model Star and Snowflakes) build in BI Admin tools.
First Model A = Subject Area A have one fact tables (with measures) and three dimensions tables (Model Star)
Second Model B = Subject Area B have one fact table (no measures) and five dimensions tables (Model Snowflakes).
I'm looking solutions how I can give good results. In this case I can't use UNION, INTERSECT etc., because this models haven't the same number column and data type?
whether it is possible to do in OBIEE?
Please help me
Kind regard
robix

Hi
One thing to understand is that if your are imagining having two Subject Areas (SAs) displayed and then dragging columns from each into your Request without any preparation, then no, that can't be done. You would need to do a join in the BMM layer and expose the column from the second Subject Area in the presentation layer.
But if you indeed interested in UNION (or intersect) queries, then do this:
Build your first query in the first SA in the usual manner. Note the number of columns and the data types of each column.
Now at the bottom of the Criteria workspace, there is a button called "Combine with similar request." Click it.
Select your second SA. You will note that the outlines of the columns in your first query appear. This is to remind you that the number of columns in this second query must be the same as in the first. It also shows the data type of each column for the same reason.
Once you select your columns and your filters, click on result. (Oh, you will also need to decide what kind of combination you want -- click on the dropdown.) The result will be a new Request that has data from both SAs in the query and combined in the manner you select (union, intersect, etc.)
That should give you a start.
http://obiee101.blogspot.in/2010/08/obiee-combine-with-similar-request.html -- Read this link this is good one to understand with screen shots. -- OBIEE 10g
http://oraclebiee11g.blogspot.in/2011/01/querying-across-multiple-subject-areas.html -- OBIEE 11g
Award Points it is useful.
Thanks
satya

How to write a case statement for the totals column of two different years (2013 and 2014) of the same month so that I can get a +/- column

Please Help!!!
How to write a case statement for the totals column of two different years (2013 and 2014) of the same month so that I can get a +/- column.
                                  January 2014         January
2013                            +/-
                Region   Entry   Exit Total    Entry   Exit   Total   (Total of Jan2014-Total of Jan2013)
                A               2         3
40        5       7        30                    40-30= 10

What is a table structure? Sorry cannot test it right now..
SELECT <columns>,(SELECT Total FROM tbl WHERE Y=2014)-(SELECT Total FROM tbl WHERE Y=2013)
FROM tbl
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to calculate AGE from two different date fields

hi
I need to calculate AGE from two different date fields.
Can some help me how to do, when i try to do substraction formula it is showing error.
Thank You
Manu

Manu wrote:
Hi
Both fields are in date format only, i need to calculate no . of days between two different dates
Thanks
ManuThe reason for the question about the format of the column is because the simplest solution only works on DATE columns. Others have mentioned this here, but if you want the difference between two date fields, you can use this formula:
TIMESTAMPDIFF(SQL_TSI_DAY, date_column1, date_column2)
The above being said, you still didn't tell me what you did, or what error message you received. So again, if the above formula didn't work, what did you do? Where did you put the formula? What was the exact syntax you used? What was the error message you got?
Please don't make us work more than we need to. Answer all the questions in your next post. Thanks.

Selecting data from two different tables.

Do we need to use join two tables with primary/foreign key while trying to use select statement for getting data from those to table.? If no who can i go about do it.

872959 wrote:
If i am using From clause to get data from two different tables, is it necessary that both tables have column of identical data in them.In general, they ought to (or you need to join in a third table that tells you how to map rows from one table to rows of the other table).
It is not strictly necessary that there be any join condition between tables. If you don't provide a join condition, Oracle has to do a Cartesian product. That means that if there are n rows in one table and m rows in the other, the result set will have n * m rows. It is very rarely a good idea to write queries that do Cartesian products but it does occasionally happen.
Justin

Concatenate columns from two different reports

Similar Messages

Maybe you are looking for