Displaying all related Query Views of an opened Query via DropDown

Hello Gurus,
I have following requirement in WAD for SAP BW 7:
All Query Views related to a opened Query should be displayed and selectable via a DropDown Item.
In the standard WebTemplate 0Analysis there is already implemented a DropDown Item called "QueryView Selection" but i dont get it working like in the BW 3.5 template 0adhoc.
Has anyone a solution or hint?
Edited by: D. Gehle on Jan 13, 2011 2:15 PM
Edited by: D. Gehle on Jan 13, 2011 2:15 PM

Hi Shantanu
Thank you for your reply.
I made a trace in the web by putting &TRACE=X at the end of the string.
I tried to analysis the transaction RSRTRACE and looked at the All Logs button against my user id.
Firstly, i do not seem to understand what this produces other than the debug session. I could not also seem to find any information that assisted me on how to produce a log file, and information that indicates what you have said in your reply.
If you could further assist providing info on how to use the debugger/log file, and how to read
- used processors
Thank you.
Simon

Similar Messages

RSS feed displaying all items as viewed.

Previously I was running a version of Firefox 13 and upgraded today to 16.0.1 and since then all my RSS feeds display all links as read (orange icon instead of grey icon) which isn't a desired state for them to be in. Even if new things show up in the feed, they still appear orange and no change happens if I open the links.

Are you using the default theme?
If you have a custom theme then that theme nay not support the RSS feed status properly.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Displaying query view name in web template.

Hi all,
In the standard web template (0ANALYSIS_PATTERN) there is a text box which displays the query title. I need to change this so it displays the name of the query view instead of the query. Does anyone know how to do this?
Many thanks,
Nick.

Hi Nick,
In the template you need not to do any special setting for Query View Name display.
When You use a query view in template that becomes as a data provider, so for every data provider whether that's a query or query view it works same.
You can select to display query technical name or description.
Hope i understood your requirement correctly. If not than please correct me.
Thanks
Dipika Tyagi

No OPEN QUERY VIEW function in BI 7 ?

Hi gurus,
Where can we open a query view in BI7's analyzer? There's no "query view" under the open button of analyzer in BI7 but there were one in BW 3.5.
Now I have to open them using old version analyzer
Regards,
Aaron

Hi Dear Chandru
Could you plz. let me know how to create a query view in BI 7.0
Your help will be more appreciated.
Please its top urgent
Thx u & b. regards.

Display Query View in WAD

Hi,
Anybody knows how to display the selected QUERY VIEW Description (i.e. in a text box) in a web template?
(I know you can select a Query View in a drop down, so it should be possible!)
Thanks,
Max

Thanks, very helpfull.
I´m using BI 7.0
However, when I do as you suggested, I still get the query name, not the query view name.
The query view should be selected dynamically from the view that is displayed at that moment.
Also, can you incorporate saved views from the Bex Portfolio and display their names?
Edited by: Max Cohen on Sep 11, 2008 5:16 PM

Query view is not displaying data correctly

Hi,
We have built a query and 4 query views on the query and it is published in the Portal.
In the query ,we have a restriction on cost elements.
And on the query view we dont have any restrictions on costelements.
But when we execute the query view,the query view is showing some restrictions on costelements.
We have created a new query view on the same query and when we execute the query view in portal, it is showing soem restricitions on query view on costelements.Because of this User is not able to see all the data.
Any one help us in understanding and fixing this problem.
Thanks in advance!!

Hi,
These are the my assumptions please can you check the same.
1) cost element is always compounding with the controlling area can you check either any restrictions are there on controlling area.
2) As you said in mother report( query) you are having the cost element restrictions , from that query only you are creating query view so automatically which ever the restrictions are there globally on that report it will be worked on view also.
so it is better to avoid that first and create teh view with out any restrictins then you can create one more view with the cost element restrictions
craet main query with out any restrictions then creae te view with restrictions, you are doing vice versa.
Thanks & Regarsd,
sathish

How to Create/Modify/Delete a query view from the web template in BI 7.0

All:
In BW 3.5, the Query Selection View web item was introduced for users to create a query view to save the navigational state of a query. This web item was also available to modify and delete an existing query view.
The Query Selection View web item does not exist in BI 7.0. I see the drop down web item can be used to display the query views associated to a query.
Can anyone share how to create,modify,save or delete a query view on the web in BI 7.0
Thanks,
Kumar

Sanjay, we experienced the same issue. Below are a few pieces of information that may be of help: 1-The Save As button on the 0ANALYZER template saves the query to the portal. From Bex Web or Bex Analyzer, you have no access to these saved views. We created a ZANALYZER copy of the 0ANALYZER template and removed the Save As button. 2- If you right mouse click on any item in the query results grid of Bex Web, you get a small menu. Clicking on the menu item Save View will save the view to BI. You do not have the ability to delete the saved views from Bex Web. However, you can delete them from Bex Analyzer. This was not an option for us since most of our users are using Bex Web. 3- On the same menu, clicking on Bookmark, saves the navigation and also opens the Internet Explorer Favorites maintence window. The navigation is saved as an entry into the users Internet Explorer favorites where they can organize and delete their entries. However, deleting the favorite does not delete the entry for the bookmark in BI. The bookmarks are stored in table RSWR_DATA. Program RSWR_BOOKMARK_REORG can be used to manage the saved bookmarks. We are loading RSWR_DATA into a chracteristic so that we can query the information in order to help us manage it. I hope this helps you and others that appear to be struggling with the issue of saved views in Bex Web.

Issues opening a BI 7.0 query in to 3.x query designer?

Hi,
I opened a 7.0 based query in to 3.x query designer. I have couple of concerns that are listed below:
1. First of all is it ok to open 7.0 query in 3.x query designer? if no what are the Consequences?
2. A warning message displayed saying that the infoprovider is inactive any idea?
3. Can use the 3.x browser for 7.0 queries? Do you think 3.x browser have all the cozy navigation options like 7.0.
Thank you.
Aslam.

Hi,
Pls find some SAP notes:
1.Queries created or adapted with the SAP NetWeaver 2004s BEx Query Designer will still appear in the Open Dialog of the 3.x tool but they cannot be opened anymore.
2.For those scenarios where customers do not want to use the SAP NetWeaver 2004s BEx Query Designer, SAP ships a 3.x version of the BEx Query Designer in addition to the SAP NetWeaver 2004s BEx Query Designer.
3.New capabilities are only implemented in the SAP NetWeaver 2004s Query Designer.
4.Query Views that were created before will still run after a query has been changed with the new BEx Query Designer.
In general, query views do not need to be migrated.
5.The new BEx Analyzer gives access to InfoProviders, queries and query views but not to query views created with the new BEx Web Analyzer. On the other hand, query views created with the BEx Analyzer are available within the new BEx Web Analyzer.
6.Several Features of the new BEx Query Designer and BEx Web (e.g. in the area of exceptions and conditions) are not available in the new BEx Analyzer.
7.SAP does not recommend using NetWeaver 2004s queries and query views in the old 3.5 BEx Analyzer.
Hope this helps,
Regards
CSM Reddy

Variable Screen for query view is hidden

Hi All,
   I caome across an old query in BW 3.5 which is haiving some mandatory variables. There is a query view for the same query but when i am executing the query view i didn't got any variable screen and its running for some predefined value. How one can hide the variable screen for query view.
   How can i achieve the same for a BI 7 query view. Please guide.
Regards:
Jitendra

Hi Rakesh,
    What you said is right but my concern is that next time when i open the query view variable screen shouldn't appear ie should run with previously stored variable values. I am working with BI 7 query view. Please guide.
Regards:
Jitendra

Query views - selection screen fields double

Hi expects,
BW 3.5 SP13.
Do you know why I have double fields in WEB report selection screen ? example Month/year ?
In WEB properties I flag 'Display same variables only once'.
I have a WEB report with one table based on a query and with two charts based on query views from the query. Some fields are mandatory in selection screen Month/year.
Br,
Ole Paludan

Hi,
It's query views based on same query also use in WEB report, so variables are the same.
Query view Purpose: to get fewer key figures to charts - but still by query show all key figures in table.
BR,
Ole

Source tables for Query views and book marks

Hi Gurus,
We are planning to recreate Query views based on a perticular query from ODS to cube.
1. Is there a table that can provide me all the query views created on the portal, Created by(User Name), description based on the query name.
Basically i am looking for the following:
INPUT: Query Name
OUTPUT:
List of all the query views created on that query
The user name or id who created the query view
Description of the query view
2. I tried in meta data repository but it only gives me query views create in older version of the portal and not 7.0.
Appreciate your immediate assistance.
Thanks,
Ravi Ananthuni

Hi Ravi,
You can get the views created on the query and the ods too. But not through table...
This may not the right process but you can find what you want.
Open WAD --> add any web item into the template --> On the left pane --> Generic --> Data Provider --> Query/View --> Click on the View icon present there.....
A popup window opens --> Click on Infoareas --> Goto your Info provider present there --> Expand it, you will find the query created on the info provider and the Views created on that query.
Hope this helps u...
Regards,
KK.

Reseting filters in a Query View

I have a query built that has a good bit of logic.
For reporting purposes I'd like to create query views from this one query so I only have to change the logic one place when the user decides they want something tweaked.
I need a view by company, one by responsible person etc ....
The problem arises that when you create the views the filters are "stuck" at what they were then (which makes the views much less useful). My main issue is for time. I want the Calendar Year/Month to be the value of the current closed month (the default value in the variable). But I want the user to be able to change it after running.
These views will be used in web templates. I've tried a few things but the closest I've come is to have a button or link that when clicked sets the filter value based on another data provider. I don't want that -- I want the value reset when the web template opens. I tried putting the same command in the "Before rendering" of the web template properties but get a stack overflow error
Is there a way to save the navigation state of a query without saving the filter values? Or is there a way I can reset the filter value in the web template?
I very frustrated

I am using the new NetWeaver2004s.
We usually just publish the template to the role & have the role in the portal so I'm not sure how to add that parameter in that case.
I tried adding to the end of the URL -- but apparently don't have the right syntax. What syntax should I use?
I tried checking "Reset Variables to Default" in the web template with no effect

Query view selection

Hello,
I am working with Bex 3.5 WAD. How do i make use of the web item "query view selection". It is not working properly for me. Is there any document that i can follow to create a web template using the above web item. Please advise.

hello Gillian,
I looked at that link before. I am able to use query view selection bex in my web template and the query drop down box is being populated by all the query views created for the query and i have given a table (table_1) as the affected web item. When i publish my template i can see the query view drop down box with the list of query views and the table. When i select one view the table is showing the results for that view, but when second view onwards the data doesn't change? what am i doing wrong. below is my html code.
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="ITEMVIEWDROPDOWN_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_VIEW_DROP_DOWN"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="WIDTH" value="20"/>
 <param name="VIEW_DD_TARGET_ITEM" value="DP1_table"/>
 <param name="VIEW_DD_RRI" value="X"/>
 <param name="VIEW_DD_USE_ALL_QUERY_VIEWS" value="X"/>
 <param name="VIEW_DD_DESCRIPTION_I" value="B"/>
 ITEM: ITEMVIEWDROPDOWN_1
</object>
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="DP1_table"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 ITEM: DP1_table
</object>

Regarding WEBI Query view

Hi All,
I am new to this BO, I was reffering some documnets in which they have mentioned regarding the SQL query view,i.e, every query will be converted to its equivalent sql query, but this option is disabled(not active) when I am working.
Does any of you come accross this situation?.If u have any idea,please let me know.
Thanks,
Vinay.

Hi,
I didnt get you .Are you creating universe based on query right .Then once you create universe(based on query) and export .This query will be present in rich client.get back incase any issues.
Regards,
JiyyanA.

How to delete Query views

Hi,
I have created 2 query views on a particular query in BI 7.
Now we don't need those query views , so we need to delete them. How can we delete them ?
1. I tried openeing Bex analyzer and opening query, query view, right click and delete. but the 'Delete' option is disabled.
2. I tried using 'RSZDELETE' but there is no chance to delete query view.
plz help me as soon as posiible.
Thank u.

Hi
1. Enter into SAP Easy Access or use tcode (SESSION_MANAGER)
2. go into SAP MENU -> INFORMATION SYSTEMS ->BUSSINESS INFORMATION WAREHOUSE -> BUSINESS EXPLORER -> QUERY -> DELETE OBJECTS
3. u will enter into "Deletion of Query objects"
   enter      TYPE -: QUERY
                 INFOCUBE -> name of infocube
                 TECHNICAL NAME -> name of the query
and EXECUTE it.
ur query view will be deleted.
assign points if helpfull
From
ManesH

Displaying all related Query Views of an opened Query via DropDown

Similar Messages

Maybe you are looking for