Displaying the Keyfigure values as characteristic/text

Hi,
Is there any option of displaying the values of a CKF/Formula as Text.
If Result of the logic applied in CKF/Formula is >1 then it should be displayed as TRUE else it should be displayed as FALSE.
How can i achieve this.
Regards,
Sandeep

Hi,
you got 2 options, using boolean function in the calculated key figure/formula. then display either 0 or 1 for true and false.
other option, if you wanted to display as text, true or false. you need to create a virtual keyfigure for this, populate true or false by using standard Badi implementation.
go through the pdfs.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c

Similar Messages

How to get the keyfigure values

hi all,
I have loaded the sales ,billing and delivery data to sales overview cobe(0sd_c03).
The keyfigures in all the update rules are inactive.I changed the update rule type to addition from no update and when i try to assign source fields to those key figures,in the f4 help of the source fields i am not getting the field.
so by this i am not getting the keyfigure values in the cube .only the characteristic values are displayed.
How to get the keyfigure values in the cube.
will there be any settings in the SPRO in R/3.
Plz give solution for this .
Points will be awarded.
thanks
Satish.

If your UR is inactive, how you can load data?
The KFs you are trying to add, are newly added KFs in cube or the existing KFs?
Do this:
Activate your cube, TR again.
Delete your UR and re-create it.
Delete all the bad requests from cube.
Now try to do the load.
OR
If you did customization your cube, make sure you did activated your cube, did the changes in your DS, replicated datasource in BW, added the new fields in TR and activated, and Deleted your UR and re-created it.
Now try.
Hope it helps..

Not to display the null values from data base

Hiiii.
In a jsp file i have ten check boxes.The jsp file is mapped to a servlet file for parameter requesting and to
store it in DB.
The unchecked box values has null values.All the values are store in a Mysql DB table.
Again i have to display it in a jsp page from table.
The problem am facing was,how can i display only the values in a row.it must not display the null values and the crresponding column name.
Or any other way is their like below
How i can retrieve only the selected check boxes from tht jsp file.and store in backend.
Thanks in Advance
regards,
satheesh kannan

Here is a rough example that may give you some ideas:
On the JSP page:
<%if(myData.getFirstName()!=null){%>
Your First Name'
<input type="text" name="firstName" value="<%=myData.getFirstName()%>">
<%}%>
In the servlet:
String firstName= request.getParameter("firstName");
if(firstName!=null){
//write it to the database
}

Select list: Display the selected value using JSP

Hi
I have a select list with a set of values and when I select a value from the list I want the selected text to appear on the screeen. How do I display the selected value?
Please help:
Here is the code for the list:
<select name="arraySelect" size="8" onclick="">
<%for (int i = 0; i < dumpArray.length; i++) {
if( i == 3){
%>
<option value="<%=dumpArray%>" selected><%=dumpArray[i]%></option>
<% i++;} else %>
<option value="<%=i%>"><%=dumpArray[i]%></option><p>
<% } %>
</select>
<% String name;
name = request.getParameter("arraySelect");
out.println(name);
I tried request parameter but it did not help. How can I do it?

did you submit your page?

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How can I get HyperTrend to display the numeric value output of a CHOOSE statement?

I have non-linear values I need to display on a HyperTrend graph. I'm currently converting the input raw signal to a Units (Engineering) value and then looking up the actual value (from a calibration chart) using a CHOOSE statement in order to display the actual value on a panel, but I need to display the values output by the CHOOSE statement on a HyperTrend graph, along with other similar values.
How can I do this?

I have non-linear values I need to display on a HyperTrend graph. I'm currently converting the input raw signal to a Units (Engineering) value and then looking up the actual value (from a calibration chart) using a CHOOSE statement in order to display the actual value on a panel, but I need to display the values output by the CHOOSE statement on a HyperTrend graph, along with other similar values.
How can I do this?

Module Pool for displaying the Grid values in Matrix format

Hi Experts,
I have one requirement which as follows,
In Module pool program i need to display the Grid Values in Matrix format i.e,
Row = Color
Column = Size
Like what we can see in Sales order or Purchase Order if you click Grid Entries Button.
Can you Please Help me out.
Thanks n Advance.
Logu

Hi
the sources ate the function groups WMMB and WMMA.
In a new release you should find the function module MGW_UTILITIES_MATRIX_SHELL_RA
the report RWRFMATCHARVAL is a good example
Regards
Björn

How do I display the correct value when using SELECT_LIST_FROM_QUERY

I have an updatable report that displays the possible values for a field.
I'm using HTMLDB_ITEM.SELECT_LIST_FROM_QUERY, so obviously I have to process the record manually.
However, I need the trick to display the correct value as selected before processing the records.
I appreciate your help.
Thanks
Juan

Thank you.
So, I just need to put the field name in the second argument.
I have it working now.
Thanks again
Juan

How to update zero to a column value when record does not exist in table but should display the column value when it exists in table?

Hello Everyone,
How to update zero to a column value when record does not exist in table but should display the column value when it exists in table
Regards
Regards Gautam S

As per my understanding...
You Would like to see this
Code:
SELECT COALESCE(Salary,0) from Employee;
Regards
Shivaprasad S
Please mark as answer if helpful
Shiv

How to display the return value of a function in a text field

Hi,
I have 2 textfields in a page.
i> Empno
ii> Salary
The requirement is,
i. Enter an Employee No.
ii. On click of the 'SUBMIT' button a process would be executed which calls a function (or procedure with out parameter) which returns the Salary of the given Employee.
iii. Need to display the salary to the 2nd textfield (Salary).
Here is my process:
i. If procedure call-- :P2_X is a page text field and out parameter.
begin
Pri_test_PROC(:P2_EMPNO,:P2_X);
end;ii. If Function call --
begin
:P2_X:=Pri_test_PROC(:P2_EMPNO);
end;
Issue:
The process is not getting executed and returning the process error message.
Could anyone please give me a pointer, how to overcome the issue. Or if this is not the right way, then what is the work around.
Regards
Antara

Antara,
1. Clue about the error - yes, when I see the error message.
2. What happens if you try to create a procedure like this:
CREATE OR REPLACE PROCEDURE fetch_sal (in_emp IN NUMBER, out_sal OUT NUMBER)
IS
BEGIN
   FOR c IN (SELECT sal
               FROM emp
              WHERE empno = in_emp)
   LOOP
      out_sal := c.sal;
   END LOOP;
END;and then run this in SQL Plus:
DECLARE
   v_sal   VARCHAR2 (20);
BEGIN
   fetch_sal (7839, v_sal);
   DBMS_OUTPUT.put_line (v_sal);
END;What do you get displayed?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How can I just display the selected value of a listbox in a report without the reverse display and selection buttons?

I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons.
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj Weir

Thank you. I'll try that approach.
I found, after much experimentation, on a similar problem involving a multiselect lookup field, that if I make the field invisible, and add a textbox that displays the fieldname plus .column(0), it displays all the selected entries.
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members.
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir

Unable to display the ClobDomain value in adf table

Hi ,
I have a database table whose column is Clob. Accordingly the Entity Attribute and VO attribute are of type. oracle.jbo.domain.ClobDomain
Now this VO is wired as a ADF Table in jsff page. I am setting the value programmatically inside the AM by using the following.
//Code inside AM
String text="some xml";
ClobDomain clobval=new ClobDomain(text.toString())
vo.setAttribute("atrName",clobVal);
Now at the UI level, I was able to print the value of the attribute inside a bean code. However, in the adf table, this cell is always empty. But if i try to set the value through UI then it works.
If i make the inputText readonly then it displays the value.
Am i missing something.
Inside the af:column
<af:inputText value="#{row.bindings.VariableValue.inputValue}"
label="#{bindings.TestcaseInput.hints.VariableValue.label}"
required="#{bindings.TestcaseInput.hints.VariableValue.mandatory}"
columns="#{bindings.TestcaseInput.hints.VariableValue.displayWidth}"
shortDesc="#{bindings.TestcaseInput.hints.VariableValue.tooltip}"
id="it4" converter="oracle.genericDomain"
rows="10">
<f:validator binding="#{row.bindings.VariableValue.validator}"/>
</af:inputText
jdev version 11.1.1.6.0

Try using SELECT_TEXT in place of READ_TEXT.
Hope this helps.
Regards
vinayak

My lov returns AND displays the return value

Hi,
For 1 of the columns I'm representing in APEX, I choose 'Display as text, based on a lov'. I'm using:
select aan.id||', '||r.naam||', '||a.woonplaats d, aan.id r
from wmo_aanvragen aan
, wmo_dossiers d
, wmo_relaties r
, wmo_adressen a
where d.avg_1_id = aan.id
and d.rel_nummer = r.nummer
and a.rel_nummer = r.nummer
and a.id = (select min(e.id) from wmo_adressen e where e.REL_NUMMER = r.nummer
and e.EIND_DATUM is null)
and d.id = (select min(f.id) from wmo_dossiers f where f.AVG_1_ID = aan.id)
But somehow it returns AND displays the 'aan.id' value instead of displaying the display value. Does anyone know howcome?? In TOAD it works fine. Starting a new page also doesn't make any sense
Niels

Nope, doesn't work either.
I've an identical statement which does work...
select z.id||', '||zst.omschrijving||', '||r.naam||', '||a.woonplaats d, z.id r
from wmo_zorgverleners z
, wmo_zorgverlener_soorten zst
, wmo_relaties r
, wmo_adressen a
where z.zst_id = zst.id
and z.rel_nummer = r.nummer
and a.rel_nummer = r.nummer
and a.id = (select min(e.id)
from wmo_adressen e
where e.REL_NUMMER = r.nummer
and e.EIND_DATUM is null)
Here,iIt does display the contcatenated text..

Displaying the column values of a wizard-generated form

Hello,
I created a Master-Detail page following the examples in the various Apex guides. The form is not working correctly, unfortunately. When I click the Add Row button a row is added at the bottom of the table. Once I enter data into that row and click the Apply Changes button I get an SQL Insert error. I understand error message; a hidden column is not getting populated. Having said all that, that is not my problem.
My problem is understanding how APEX is storing the data it displays in the table so I can manipulate it to place a value into that hidden column.
I read many posts about how data is stored in the fxx arrays. I've looked at my source and have seen values like f02, f03, f03_0004 and so on. So, I tried creating a report to display the contents of APEX_APPLICATION.G_F03(1). I created another report on the same page with the following SQL statement:
SELECT 'Code: '||apex_application.g_f03(1) F1
FROM DUAL;
When I run the page, the second report shows this: ORA-06553: PLS-221: 'G_F03' is not a procedure or is undefined.
Someone (I think Denes) suggest creating a process with the following PL/SQL to help locate the correct array:
BEGIN
wwv_flow.debug('******************************');
wwv_flow.debug('*** STARTING MY DEBUG HERE ***');
wwv_flow.debug('1: ' || APEX_APPLICATION.G_F01(1));
wwv_flow.debug('2: ' || APEX_APPLICATION.G_F02(1));
wwv_flow.debug('3: ' || APEX_APPLICATION.G_F03(1));
wwv_flow.debug('4: ' || APEX_APPLICATION.G_F04(1));
wwv_flow.debug('5: ' || APEX_APPLICATION.G_F05(1));
wwv_flow.debug('*** ENDING MY DEBUG HERE ***');
wwv_flow.debug('******************************');
END;
With that process in place, whenever I run the page I get an error that says ORA-01403: no data found. When I comment out the five lines that reference APEX_APPLICATION.G_Fxx the page runs, but I cannot see the remaining debug comments UNLESS I place the process to run before or after the Footer.
I hope that all makes sense.
So, what am I doing wrong about displaying the contents of the array that is storing the table?
Respectfully,
Leon

You can't reference a package variable in a SQL statement like you do in:
SELECT 'Code: '||apex_application.g_f03(1) F1
FROM DUAL;
You can only reference it in a PL/SQL block (like you did in a Before/After Footer process). If you try to use the variables before they are instantiated you'll get the no-data-found error.

How to display the last value of a field in a group in the group header

I need to display the last quiz score from a group of quiz scores as part of the header of a group of units (the quiz score values are in the detail record). I can not use the group footer, which would be the natural place to find the last value. It must be in the group header because there will be a subsequent group within the unit group. In other words, the grouping is as follows:
Unit Group Header (Display last quiz score in unit)
SubUnit Group Header (Display other detail summaries)
Detail Record (including quiz score)
SubUnit Group Footer
Unit Group Footer
While there is a minimum/maximum summary function, there is not a first/last function.
Fuskie
Who is constantly amazed at the ability of users to request report features that are not easily implented through Crystal Reports...

Hi Fuskie,
One suggestion to display the last quiz score in the Group Header, other than what had already been suggested, will be to use a linked subreport in the Group Header. It is not an efficient way to display the information, but it could do the trick.
Another suggestion will be to insert a subreport in the report header, then store the last quiz score in an array for each group, then share it with the main report and display the values in the appropriate group. In this way it will only connect twice to the data source, one for the main report and once for the subreport, instead of multiple connection for each group.
Finally, the most efficient way will be to have this value calculated on the database side using a command object or a stored procedure.
Patrick

Displaying the Keyfigure values as characteristic/text

Similar Messages

Maybe you are looking for