Distortion in Save For Web interface

I am still having problems with my Save For Web interface. Attached is a screen where you can see that with just the Optimized view showing (in this case 72%), the picture looks as expected. But if I go to 2-up or 4-up views, the 2nd image (which was the 72% Optimized) is now all pixelated as if it were a GIF.

OMG! How many years have I been using this program and I have never noticed this until now?!?
Sorry for the brain fart and thanks for pointing that out!!!
I am really having a good laugh at myself about this one!
Jules

Similar Messages

About CS6 save for web quality.Always aliasing.

I used to save JPEG or PNG by save for web before(CS5).
I found out beside the "save for web" interface changes and the quality become very low in CS6.
No matter setting high quality 100%. it is sill aliasing.
I know if use "export" it colud be better. BUT I can't set the image size.
I have to edit artboards or resize in photoshop.
I want to make sure what worng with my cs6 save for web. it's my computer problem or does anyone else have the same problem??
Thanks.
mac pro os x 10.8.3 / cs6

save for web setting
I tried optimized and matte...same result.
save-for-web-seeting-300%forview
result_save-for-web

Pshop CS3 Save for Web Increases Width/Height

Hi, I've been using Photoshop for 15 years and used the Save for Web at CS2 without problem. In CS3, it is downsampling the res from 300 ppi to 72 correctly but at the same time increasing the width and height, as though I'd gone into Image Size to do the resize and had the Resample Image field unchecked. This worked fine in CS2, so what gives? I can't find any setting that needs to be changed in the Save for Web interface.

Buko, I respectfully submit that your comment makes no sense. In CS2, using Save for Web automatically cut down the ppi to 72, and it removed web-unnecessary things like previews and paths so that the file could become smaller. It did NOT change the width or height of the image.
The CS3 version is cuts down the res to 72ppi. This is fine. The problem we're experiencing (on more than one machine) is that it's growing the width and height as though it's not downsampling when it changes the res. IF that's what you mean by "strictly pixel based," then OK, but it's problematic.
This is exactly the opposite result that you get if you take a digital camera photo that has a large dimension but low res, and increase the res to 300 while not allowing it to resample: you get a high-res image with smaller width/height image, as all pixels get smaller but maintain their exact colors.
If the CS3 version of Save for Web changes the diensions of the image, which is frequently created based on the final dimensions needed in the web page, then it's freakin' useless, and I might as well create an Action using Image/Image Size to reduce the res but maintain dimensions.

Interface keeps changing in save for web panel

How can I set my interface to stay the same as one time the "save for web" panel shows the 4 images in a square, then the next time it shows in 4 vertical strips and then other times is shows up in horizontal strips?
This might be something very simple, but it's really annoying me!
Thanks in advance!
Windows Vista
PS CS4

OMG! How many years have I been using this program and I have never noticed this until now?!?
Sorry for the brain fart and thanks for pointing that out!!!
I am really having a good laugh at myself about this one!
Jules

Save for Web darker interface

I have for a long time been an advocate for the darker interface, using it mainly in After Effects. So it's great that the CS6 apps have taken this to other apps in the Suite. However Save for Web has been missed out it seems. Anyone else think this should be able to be darkened like the rest of the PS interface?

Yup, along with ACR and others - would be nice to have a consistent UI throughout the product, The main UI and Lightroom compliment each other very well, but then you get the sudden bright flash as a non-conformer pops into view.......
I heard from Nik they are looking to match their Selective Tool to match the new Photoshop UI.....
MK

Pixelation / Distortion when using "Save for Web..." versus "Export"

Hi. When I export from Illustrator using the Save for Web & devices option (I export the original at png24) the images are not as smooth as those produced by selecting File-Export. 2 images produced by both images are attached. The variation is most noticeable on the round corners.
Is there a way to export work at full quality using the Save for Web & Devices option?

jkadobeil,
I have transparency ticked. One cannot specify matte if transparency is ticked.
I can in 10. It may be a bug or corrupted preferences. If the latter, you may try to Ctrl/Cmd+Alt/Option+Shift during startup or Move the folder with Illy closed.

Save for web crash - Illustrator CC

I have tried to save for web on Illustrator CC but it just lags and then i have to force quit.
I tried to use save for web on Illustrator CS6 and it works fine, so im not too sure whats causing the problem.
Can anyone help me? I dont get a crash report so im not sure where i should look for a problem?

Components:
adbeape 3.4.0.29366 0.1160850
adobe_caps 7.0.0.21 1.248010
AdobeACE 2.20.02.30929 79.537641
AdobeAFL 1.5
AdobeAGM 4.30.20.30929 79.537641
AdobeARE 1.5.02.30929 79.537641
AdobeAXE8SharedExpat 3.8.0.30807 79.35031
AdobeAXEDOMCore 3.8.0.30807 79.35031
AdobeAXSLE 3.8.0.30807 79.35031
AdobeBIB 1.2.03.30929 79.537641
AdobeBIBUtils 1.1.01 79.537641
AdobeCoolType 5.13.00.30929 79.537641
AdobeCrashReporter 7.0.1
AdobeExtendScript 4.5.5.30772 79.535862
AdobeJP2K 1.2.2.29712 79.248139
AdobeLinguistic 19061
AdobeMPS 5.8.1.30604 79.535029
AdobeOwl 5.0.13 79.533484
AdobePDFL 10.0.1.30505 79.499517
AdobePDFPort 2.1.0.30929 79.537641
AdobePDFSettings 1.4
AdobePIP 7.0.0.1768
AdobePSL 14.0.0.30830 79.894141_14.894133
AdobeSangam 5.65.0.30772 79.248557
AdobeSangamML 5.65.0.30772 79.248557
AdobeScCore 4.5.5.30772 79.535862
AdobeSFL 1.1.0.30369 79.248398
AdobeSplashKit 1.0
AdobeSVGExport 6.0 1.0
AdobeSVGRE 6.0 1.0
AdobeXMPCore 79.151739 79.151739
AdobeXMPFiles 79.151739 79.151739
AdobeXMPScript 79.151739 79.151739
AFlame 2.07.14.30879 79.536858
AFlamingo 2.4.104.30879 79.536858
ahclient 1.8.0.31
aiport 16.0.0.256
Alcid 1.0
amtlib 7.0.0.169
boost_date_time 7.0.0.0
boost_filesystem 7.0.0.0
boost_regex 7.0.0.0
boost_serialization 7.0.0.0
boost_signals 7.0.0.0
boost_system 7.0.0.0
boost_threads 7.0.0.0
dvaadameve 7.0.0.0
dvaai 7.0.0.0
dvacore 7.0.0.0
dvaflashview 7.0.0.0
dvascriptui 7.0.6.0
dvaui 7.0.0.0
dvaworkspace 7.0.0.0
exo 7.0.0.0
FileInfo 79.151561 79.151561
filterport 16.0.0.256
ICUConverter 3.61 "gtlib_3.0" "." "16615"
ICUData 3.61 "gtlib_3.0" "." "16615"
ICUInternationalization 3.61 "gtlib_3.0" "." "16615"
ICUUnicode 3.61 "gtlib_3.0" "." "16615"
LogSession 2.1.2.1756
PlugPlugOwl 4.0.1.76
SPBasic 16.0.0.256
UpdaterNotifications 7.0.1.102 "7.0.1.102"
WRServices
ATE
OS: OS X
Version: 42.28
System Architecture: Intel
Built-In Memory: 8191 MB
Application Folder:
/Applications/Adobe Illustrator CC/Adobe Illustrator.app/
Primary Scratch Folder:
/private/var/folders/yy/qhbklzt91d3gz04n4y794x_h0000gn/T/TemporaryItems/
Secondary Scratch Folder:
Plug-ins:
Live Menu Item
Adobe AI Application Plugin
Color Conversion
New Cache Plugin
AdobeLicenseManager
ZStringTable
Main Filters
Main File Formats
AI File Format
Mesh Object
Control Groups
Composite Fonts
Place Gun Tool
AppAnnotators
Window Menu
File Format Place EPS
Debug Menu
SLO Text Tool
Document Window Plugin
Sweet Pea 2 Adapter Plugin
AdobeActionManager
Adobe Illustrator User Interface
FrameworkS
Art Converters v2
BRS Pencil Tool
FlattenTransparency
FO Conversion Suite
PDF Suite
Rasterize 8
BeautifulStrokes Suite
AdobeBrushMgr
Adobe Color Harmony Plugin
Control Panel Plugin
Kinsoku Dlg
Adobe Planar Edit Plugin
AdobePaintStyle
Adobe Perspective Guides
ScriptingSupport
AdobeSwatch_
Adobe Symbol Palette Plugin
AdobeToolSelector
Adobe Variables Palette
Vectorize
TextWrap Dlg
Adobe DXFDWG Format
Mojikumi UI
SvgFileFormat
DxfDwgUI
AdobeDiffusionRaster
Adobe Geometry Suite
Adobe Deform Plugin
AdobeSlicingPlugin
ShapeConstruction Suite
Pathfinder Suite
ExpandS
Asset Management
DocInfo
AdobeLinkPalette
Snapomatic
Colors
TrimMark v2
Distort v2
DropShadow
AdobeTextDropper
Photoshop Plugin Adapter Unsharp Mask...
Photoshop Plugin Adapter ZigZag...
Photoshop Plugin Adapter Wind...
Photoshop Plugin Adapter Wave...
Photoshop Plugin Adapter Twirl...
Photoshop Plugin Adapter Tiles...
Photoshop Plugin Adapter Targa
Photoshop Plugin Adapter Spherize...
Photoshop Plugin Adapter Smart Blur...
Photoshop Plugin Adapter Shear...
Photoshop Plugin Adapter Ripple...
Photoshop Plugin Adapter Radial Blur...
Photoshop Plugin Adapter Polar Coordinates...
Photoshop Plugin Adapter Pointillize...
Photoshop Plugin Adapter Pinch...
Photoshop Plugin Adapter PNG
Photoshop Plugin Adapter OpenEXR
Photoshop Plugin Adapter Mezzotint...
Photoshop Plugin Adapter Lens Flare...
Photoshop Plugin Adapter Paths to Illustrator...
Photoshop Plugin Adapter CompuServe GIF
Photoshop Plugin Adapter Fibers...
Photoshop Plugin Adapter Extrude...
Photoshop Plugin Adapter Displace...
Photoshop Plugin Adapter De-Interlace...
Photoshop Plugin Adapter Crystallize...
Photoshop Plugin Adapter Crop and Straighten Photos Filter
Photoshop Plugin Adapter Color Halftone...
Photoshop Plugin Adapter BMP
Photoshop Plugin Adapter IFF Format
Photoshop Plugin Adapter Pixar
Photoshop Plugin Adapter PCX
Photoshop Plugin Adapter NTSC Colors
Photoshop Plugin Adapter Legacy Gaussian Blur...
Photoshop Plugin Adapter Water Paper...
Photoshop Plugin Adapter Watercolor...
Photoshop Plugin Adapter Underpainting...
Photoshop Plugin Adapter Torn Edges...
Photoshop Plugin Adapter Texturizer...
Photoshop Plugin Adapter Sumi-e...
Photoshop Plugin Adapter Stamp...
Photoshop Plugin Adapter Stained Glass...
Photoshop Plugin Adapter Sprayed Strokes...
Photoshop Plugin Adapter Sponge...
Photoshop Plugin Adapter Spatter...
Photoshop Plugin Adapter Smudge Stick...
Photoshop Plugin Adapter Rough Pastels...
Photoshop Plugin Adapter Reticulation...
Photoshop Plugin Adapter Poster Edges...
Photoshop Plugin Adapter Plastic Wrap...
Photoshop Plugin Adapter Plaster...
Photoshop Plugin Adapter Photocopy...
Photoshop Plugin Adapter Patchwork...
Photoshop Plugin Adapter Palette Knife...
Photoshop Plugin Adapter Paint Daubs...
Photoshop Plugin Adapter Ocean Ripple...
Photoshop Plugin Adapter Note Paper...
Photoshop Plugin Adapter Neon Glow...
Photoshop Plugin Adapter Mosaic Tiles...
Photoshop Plugin Adapter Ink Outlines...
Photoshop Plugin Adapter Halftone Pattern...
Photoshop Plugin Adapter Graphic Pen...
Photoshop Plugin Adapter Grain...
Photoshop Plugin Adapter Glowing Edges...
Photoshop Plugin Adapter Glass...
Photoshop Plugin Adapter Fresco...
Photoshop Plugin Adapter Film Grain...
Photoshop Plugin Adapter Dry Brush...
Photoshop Plugin Adapter Diffuse Glow...
Photoshop Plugin Adapter Dark Strokes...
Photoshop Plugin Adapter Cutout...
Photoshop Plugin Adapter Crosshatch...
Photoshop Plugin Adapter Craquelure...
Photoshop Plugin Adapter Cont^e Crayon...
Photoshop Plugin Adapter Colored Pencil...
Photoshop Plugin Adapter Chrome...
Photoshop Plugin Adapter Charcoal...
Photoshop Plugin Adapter Chalk && Charcoal...
Photoshop Plugin Adapter Bas Relief...
Photoshop Plugin Adapter Angled Strokes...
Photoshop Plugin Adapter Accented Edges...
Photoshop Plugin Adapter Filter Gallery...
Twirl v2
Simplify
ShapeTool
Segment Tools
Adobe Scatter Brush Tool
Reshape Tool
Adobe Symbolism
Magic Wand
Liquify
Lasso
Knife Tool
Adobe Flare Plugin
Adobe Eraser Tool
Adobe dBrush Brush Tool
Adobe Crop Tool
Adobe Calligraphic Brush Tool
BoundingBox
AdobeArtBrushTool
Advanced Select
TypeCase
Smart Punctuation
TxtColumns
Spell Check Dictionary
TextFindFont
Adobe PSD File Import
Adobe PSD File Export
PSLFilterAdapter
Photoshop Adapter
Phantasm
ZigZagUI
VectorizeUI
VariablesPaletteUI
TwirlToolUI
ScribbleUI
TransformUI
TIFF File Format UI
TextExportUI
SWFExport UI
SvgFileFormatUI
Spell Check UI
AdobeSlicingUI
ShapeEffectUI
ScribbleFillUI
ScatterBrushToolUI
SangamFormatsUI
RoundUI
RoughenUI
RasterizeUI
PuckerAndBloatUI
PSLFilterAdapterUI
Adobe PSD File Import UI
Adobe PSD File Export UI
AIPreferenceUI
PlanetXUI
PerspectiveUI
PDF File Format UI
PathfinderUI
ParticleSystemUI
OffsetPath UI Plugin
ObjectMosaicUI
LiveBlendsUI
LiquifyToolUI
JPEGFormatUI
IllustratorUI
GlobAdjToolUI
FuzzyEffectUI
FlattenTransparencyUI
FlareUI
Find Replace UI
ExpandUI
DropShadowUI
DistortUI
DeformUI
Adobe dBrush Brush Tool UI
CSSExtractUI
AdobeBrushMgrUI
BRSPencilToolUI
ArtOnPathBrushToolUI
AI Toolbox UI Plugin
AddArrowUI
TIFF File Format
TextExport
SWFExport
AISangamMapper
PNG File Format
MPSParser
MPSExport
MPSCommon
JPEG Plugin
JPEG2K Plugin
GIF89a Plugin
Save4Web
ZigZag v2
Scribble v2
ShapeEffects v2
Adobe Scribble Fill
Saturate
Round v2
Roughen v2
Punk v2
AdobePathfinderPalette
Overprint
OffsetPath v2
AI Object Mosaic Plug-in
MaskHelper v2
Inverse
FuzzyEffect v2
Find
Expand
Cleanup
Adjust
AddArrowHeads v3
Add Anchor Points
Adobe Custom Workspace
AdobeTransparencyEditor
Transform v2
AdobeTransformObjects
SVG Filter Effect v2
Stroke Offset v2
GradientMeshPlugin
Services
SeparationPreviewPlugin
Scripts Menu
Print Plugin
PathConstruction Suite
Package
Adobe Nudge
AdobeNavigator
Adobe Path Blends
AdobeLayerPalette
KBSC Plugin
IdeaFileFormat
Flatten Suite
Flattening Preview
FileClipboardPreference
CSSExtract
Character and Paragraph Styles
AI Bottlenecks Plugin
Asset ManagementUI
Adobe Art Style Plugin
AdobeArtboardPanel
AppBarControls
Alternate Glyph Palette
AdobeAlignObjects
AdobeActionPalette
3D v2
PDF File Format

Help please with output settings in Save For Web Photoshop CS4

I am new to CS4 Photoshop so have been watching tutorials on Lynda.com. According to that tutorial I should have the ability to save a photo as an image in the Output Settings dialog box. The only options my panel gives me are:
HTML
Slices
Background
Saving Files
I don't have the option for Images Only or for HTML & Images. Are these two hidden somewhere?
I have been experimenting with Save For Web, but when I click on Save I get a panel that lists all the images saved in a folder named "Photos" but I cannot find in that folder any of the images that I optimized and saved for the web. Where are they to be found? Images that show up in Bridge are not my optimized images either.I would be grateful for some assistance with this.

Those settings, HTML, Slices, etc, are the Output Settings you don't normally need to change aonything in there.
Leave it at default and you will just save a version of the image stripped of unnecessary data and reduced to the degree you specified next to the file format choice.
When you press Save in the SfW interface it calls up a Windows OS Save dialog box showing the last used location.
The destination can be changed in the normal way. The Images you already saved will be in the the location that was in that dialog when you saved them.
There is a lot more information in the help pages on this topic! (Hint.)

Crop tool doesn't work in Save for Web GRRRRRR

Hi,
I'm working with Illustrator CS3 and seem to have a problem with the crop area tool. When exporting an image in "save for web", however, Illustrator just ignores the settings and crops to the artboard.
Is this a know bug? Or my computer going nuts? What should I do?
I took this from the lost archiveâ¦ I seems that slices influence this.
Anybody any clues? (AI 13.02/ OS X 10.4.10)
thnx

Basically, I would do this as James does. However, James is assuming you know what he means by "Use two applications of Transform effect to make the 3 x 4 array." Since you or another reader may not, I offer the following recipe that I prepared some time ago for a class. It's for 8-up business cards that will fit on letter-size stock.
SETTING UP THE ELEMENTS
New document, rename Layer 1 to Cards.
Make a rectangle 3.5 X 2 inches (the size of a standard business card). Give it no stroke and a light gray fill (so you can see it as reference; you can clear the fill later).
Make a single set of crop marks for the top left corner. I made a 27-pt. square (3/8 inch) - no stroke or fill - and another at 18 pts (1/4 inch) - .25 stroke, no fill. Copy a horizontal segment from the smaller square, paste, and drag it to snap its left anchor to the bottom left anchor of the larger square. Copy a vertical segment from the small square, paste, and drag it to snap its upper anchor to the top right corner of the larger square. Delete the small square and group the segments/large square. Drag this group into the Symbols panel so you never have to make one again. The group on the page is now a Symbol; drag it by its lower right anchor to snap to the upper left corner of the business card rectangle. The two quarter-inch crop marks are offset from the card by 1/8 inch.
Select the crop symbol.
Go to Effect > Distort & Transform > Transform
Move Horizontal: 3.5 inches (the width of the card)
Move Vertical: 0
Copies: 1.
Reference Point (tic-tac-toe thing): right column
Reflect X: On
OK. The crop marks appear on the upper right corner of the card.
Effect > Distort & Transform > Transform
(Warning box: Apply New Effect)
Move Horizontal: 0
Move Vertical: -2
Copies: 1
Reference Point: lower row
Reflect Y: On
OK. Crop marks appear on all four corners of the card.
At this point you can give the card rectangle a fill and stroke of None, and save the card/crop marks combination as a symbol. Call it BC.
Delete all the unused Symbols and Save Symbol Library: "BC"
Target the Card layer (click on the circle)
Effect > Distort & Transform > Transform
Move Horizontal: 4 inches
Move Vertical: 0
Copies: 1
Reference Point: any
Reflect: Both Off
OK. A copy of the card with its crop marks appears 1/2 inch to right of original.
Effect > Distort & Transform > Transform
Move Horizontal: 0
Move Vertical: -2.5 inches
Copies: 3
Reference Point: any
Reflect: Both Off
OK. 3 new rows of cards and crops appear below the first row
You now have crop marks for 8-up business cards; the original crop symbol and card rectangle are selected.
Go to the Graphic Styles panel and make this a new graphic style; name it BC 8-Up. Delete all the unused Graphic Styles, and Save Graphic Style Library as "BC 8-UP"
USING THE ELEMENTS
New document. Drag out an instance of the BC symbol, and put it in the upper left corner of your letter-size page.
Click the BC 8-Up Graphic Style. Eight blank business cards are laid out.
New layer. Over the top left business card create or place any combination of type or art you want repeated on all the cards.
Target the layer and click the BC 8-Up Graphic Style. The artwork appears in place on all the cards. Any editing you do in the top left card is instantly reflected in the others. Also, because the style is applied to the layer, anything you put on this layer will have the style applied to it.
New layer. Over the top left business card place any type you want to be different on each card. With it selected as an object, click the BC 8-Up style - the type appears on all the cards.
Object > Expand Appearance. The type on each card is now individually editable.

Error when trying to "Save for Web"

I, like others have the same problem in Photoshop Elements 6 editor when trying to "Save for Web". I get an error:
could not complete the export command because of a program error
I've searched the forum, but it seems like no one has found a solution.
I have a new PC with Windows 7 on it. It's Win 7 Ultimate 64-bit. i5 processor, 16GB RAM and plenty of HD space.
I am running Photoshop Elements 6.
When I used the same version of Photoshop Elements 6 on my old XP computer, I didn't have this problem.
Adobe Photoshop Elements Language Version: 6.0 (6.0 (20070910.r.377499))
Operating System: Windows Vista
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP
Physical processor count: 4
Built-in memory: 15822 MB
Free memory: 11064 MB
Memory available to Photoshop: 1621 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: 10571087952197841429
Application folder: D:\Program Files\Adobe Photoshop Elements\
Temporary file path: C:\Users\Roger\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 111.7G, 76.2G free
Primary Plug-ins folder: D:\Program Files\Adobe Photoshop Elements\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
   3D Transform 10.0 (10.0x001)
   ADM NO VERSION
   ASDStrm NO VERSION
   Accented Edges 9.0
   Angled Strokes 9.0
   Auto Divide 6.0.0.0 (6.0 (20070910.r.377499))
   Average 10.0 (10.0x001)
   BMP 10.0 (10.0x001)
   Bas Relief 9.0
   Camera Raw 4.2
   Chalk & Charcoal 9.0
   Charcoal 9.0
   Chrome 9.0
   Clouds 10.0 (10.0x001)
   Color Halftone 10.0 (10.0x001)
   Color Variations 10.0 (10.0x001)
   Colored Pencil 9.0
   CompuServe GIF 10.0 (10.0x001)
   Conditional Mode Change 10.0 (10.0x001)
   Conté Crayon 9.0
   Correct Camera Distortion 9.0
   Craquelure 9.0
   Crop and Straighten Photos Filter 10.0 (10.0x001)
   Crosshatch 9.0
   Crystallize 10.0 (10.0x001)
   Cutout 9.0
   Dark Strokes 9.0
   De-Interlace 10.0 (10.0x001)
   Difference Clouds 10.0 (10.0x001)
   Diffuse Glow 9.0
   Displace 10.0 (10.0x001)
   Dry Brush 9.0
   Extrude 10.0 (10.0x001)
   FastCore Routines 10.0 (10.0x001)
   Fibers 10.0 (10.0x001)
   Film Grain 9.0
   Filmstrip 10.0 (10.0x001)
   Filter Gallery 9.0
   Frame From Video 6.0
   Fresco 9.0
   Generic EPS 10.0
   Glass 9.0
   Glowing Edges 9.0
   Grain 9.0
   Graphic Pen 9.0
   Halftone Pattern 9.0
   Ink Outlines 9.0
   JPEG 2000 2.0
   Lens Flare 10.0 (10.0x001)
   Lighting Effects 10.0 (10.0x001)
   Liquify 7.0
   MMXCore Routines 10.0 (10.0x001)
   Magic Extractor 10.0 (10.0x001)
   Matlab Operation 10.0 (10.0x001)
   Mezzotint 10.0 (10.0x001)
   Mosaic Tiles 9.0
   Multiprocessor Support 10.0 (10.0x001)
   NTSC Colors 10.0 (10.0x001)
   Neon Glow 9.0
   Note Paper 9.0
   Ocean Ripple 9.0
   OnEdge 1, 0, 0, 1
   PCX 10.0 (10.0x001)
   PNG 10.0 (10.0x001)
   PNG Icons 1.22x1
   Paint Daubs 9.0
   Palette Knife 9.0
   Patchwork 9.0
   Photocopy 9.0
   PhotomergeUI 10.0 (10.0x001)
   Picture Package Filter 10.0 (10.0x001)
   Pinch 10.0 (10.0x001)
   Pixar 10.0 (10.0x001)
   Plaster 9.0
   Plastic Wrap 9.0
   Pointillize 10.0 (10.0x001)
   Polar Coordinates 10.0 (10.0x001)
   Poster Edges 9.0
   Radial Blur 10.0 (10.0x001)
   Read Watermark 1.70.19
   Reticulation 9.0
   Ripple 10.0 (10.0x001)
   Rough Pastels 9.0
   Save for Web 3.0
   ScriptingSupport 10.0
   Shear 10.0 (10.0x001)
   Smart Blur 10.0 (10.0x001)
   Smudge Stick 9.0
   Solarize 10.0 (10.0x001)
   Spatter 9.0
   Spherize 10.0 (10.0x001)
   Sponge 9.0
   Sprayed Strokes 9.0
   Stained Glass 9.0
   Stamp 9.0
   Straighten Image 10.0 (10.0x001)
   Straighten and Crop Image 10.0 (10.0x001)
   Sumi-e 9.0
   Targa 10.0 (10.0x001)
   Texture Fill 10.0 (10.0x001)
   TextureSelect 10.0 (10.0x001)
   Texturizer 9.0
   Tiles 10.0 (10.0x001)
   Torn Edges 9.0
   Twain Acquire 10.0 (10.0x001)
   Twain Select 10.0 (10.0x001)
   Twirl 10.0 (10.0x001)
   Underpainting 9.0
   WIA Support 10.0 (10.0x001)
   Water Paper 9.0
   Watercolor 9.0
   Wave 10.0 (10.0x001)
   Wind 10.0 (10.0x001)
   Wireless Bitmap 10.0 (10.0x001)
   ZigZag 10.0 (10.0x001)
Plug-ins that failed to load: NONE
Installed TWAIN devices:
   WIA-HP Scanjet 4800 series

I also tried the alt/ctrl/shift buttons when clicking Editor in the Photoshop welcome screen. It did ask if I wanted to reset the preferences. I chose yes. I still get the same error message when trying to save for web.
Below....showing I don't have a "save for web" folder on my C drive.
And below, showing the same error after pressing alt/shift/ctrl when clicking on editor and clearing the preferences.
I don't have a 'Save for Web' folder anywhere on my C: drive. I searched and came up with no folder with the text "save for web" in it.
I did find a "save for web" folder on my D: drive and deleted that.. but now when I start up Photoshop, the option for Save for Web is grayed out...not able to select it.

Save for Web & Devices 2-up view not appearing side by side

Hi, I'm hoping someone can help me with this issue. In Photoshop CS4, when I used to go to the Save for Web & Devices screen, I liked using the 2-up view so I could see the difference between my original and the optimized versions. However, I've tried doing this in CS4 now and I remember seeing (in CS3 I believe) where the layout of the 2-up view was side by side (vertically) so you could have the original on the left and the optimized on the right. Now, in CS4, at least on my machine (mac OSX tiger), the 2-up view only displays the original and optimized horizontally (with the original on top and the optimized below). Is this a fixed layout for the 2-up view or can this be changed? Is this normal is something corrupted? I've looked everywhere for a button or setting to click (that I could think of) and have not been able to find a place where the layout setting can be changed. I know it's a very small issue for most people, but I really preferred viewing the two versions side by side vertically instead of one on top of the other. I'm assuming that this is just a setting somewhere that the user could change but I don't know - perhaps this interface update is new to CS4 and is not customizable?
Anyone have any information or solutions to this?

Thanks so much...that was so easy, but I don't think I would ever have found it!
It works now, I just resized the window and it's now side by side...funny how this was not described in the help file when I looked it up!
Thanks again.

"Save for Web" exporting very slowly

I appologize if this question has been answered somewhere already, I didn't find a solution for my problem, so here goes.
When saving images for web, photoshop (or is it still considered image ready?) can take as long as 10-15 seconds per slice while saving. I found several people had an issue where the save for web GUI was taking a long time to load up... I do not have that issue. My GUI loads nice and quick, and the interface is as responsive as it should be. Only after telling the program to save the files does it start to chug.
I'm using a brand new Dell machine with Windows 7 fully updated. Have 4 gigs of ram, 2.4Gh Xeon, and 170gb of free HD space. Also, I'm using CS4 64bit Photoshop.

Time to resurrect this thread...
I've been having the same slow-saving problem as before, now both 32 and 64 bit versions are saving slowly. I have noticed that once every blue moon it will export a file quickly, but seems there next attempt is slow again. Same issue whether reading and/or writing on a local or network drive. Also, as stated above, it doesn't seem to be relative the size of the source file, destination file, or number of slices. Big and little, dozens of images or a single image, they're all slow and they all seem to take roughly the same ammount of time.
I also have CS4 installed on my computer at home (which is pretty similar, hardware-wise, to my work PC) and I don't have this problem.
Scowering google I was unable to find any threads that directly relate to this problem. The closest thing I found was a post ( found here http://typography.com/documents/a_photoshop_slowness_fix.php) that says to delete "/Library/Preferences/com.adobe.Photoshop.plist" and "/Library/Preferences/com.adobe.mediabrowser.plist", then let photoshop recreate those files. The only problem is I can't find either of those files in CS4.
Anyhow... just looking for any suggestions. I'll try anything at this point. I'm probably losing close to an hour some days just sitting and waiting for my machine to export slices.

Unknown Error when using save for web

When saving a gif using the "save for web" option in Photoshop CC 2014, I get a "Could not complete operation.An unknown error has occurred" message. I am using Mac 10.10.1. I tried deleting the "save for web" pref files but same error happens. Size of the file being saved (large or small) makes no difference. No problems saving files using "save as". Photoshop was uninstalled/reinstalled. Problem is still there.

I think the reason why this question is asked often is because the FAQ entry is pretty lame and incomplete, especially for Mac users that by default have a color managed browser and by default have a screwed up rendering mechanism for untagged images.
Depending on your version of Photoshop, you can convert to sRGB before or during the Save for Web operation.
cesspool13 wrote:
...I have been told that you are not supposed to embed the ICC profile in the document when saving for web because most monitors are untagged.
You convert to sRGB for the systems that do not fully support color management.
and...
You include the sRGB ICC profile for the systems that do support color management.
Doing both covers your bum in most situations. You may choose to omit the ICC profile if you are working on common interface graphics that do not require strict color management. The ICC profile adds a few kilobytes to the file size that are not necessary on lesser graphic elements on a web page.

IBooks author color shift with "Save for web devices..."

Hi! I'm a web developer and I'm learning to use iBooks. It's a really easy tool, but there is a problem with color management wich is driving me crazy. This happen when I export images from "Save for web devices..." from Photoshop, then drag it to iBooks author.
As I do for web development, I do this:
1) Configure photoshop Color Settings to work with "Color Monitor"
2) Remove any color management from my document
3) Proof Setup > Monitor RGB
4) Disable Proof Colors
5) Use "Save for web devices..." with ICC profile and sRGB unchecked
The exported JPG looks fine everywhere... Photoshop, Preview, Safari, Chrome, FF... but looks washed out when I drag it to iBooks Author. Why?
I solved this issue converting to sRGBIEC61966-2.1 profile and checking ICC profile when "Save for web devices...", but I'm not confortable with this workaround because I'm not sure about what I'm doing exactly, and I am not sure if this images are gonna look good on any device (I only own an iPad 3).
Somebody know a best method to deal with this?
Thanks!

Hi KT. Thanks for your response. I'm already using this formats. Anyway, the problem occurs within iBooks Author interface. I mean: I can see the color shift (or washed out...) at iBooks Author at my computer screen. Of course, when I test it on iPad it also looks bad.
It's incredibly strange because the JPGs I'm using looks fine everywhere else except iBooks Author.

Photoshop CC Save for Web Incorrect

Hi everyone,
I recently purchased the Adobe CC suite for my Mac, OSX Mountain Lion.
Trying to Save for Web (which works) but I'll select an option on the top right, lets just say JPEG 70% (or PNG or anything) for arguments sake and on the bottom left where it displays the potential file output information it'll always show GIF, the GIF output size, etc.
I'm not sure whether I've got a setting wrong but I haven't had to change anything since I started using Photoshop back at PS7.
Wondering if its a bug or not or if anyone knows a potential fix?
Thanks!

Hey ckocho,
I can confirm this is a bug.
My belief is, it may have triggered after attempting to export a very large sliced document with "Save for web..." and then become stuck in this mode.
Here's a list of my symptoms (so others might stumble accross the solution):
- Photoshop CC (updated to version 14.1.2 x64), Windows 7, 64bit
- Save for Web... interface fails to correctly show "Optimised" view
   - No estimated filesize displayed for slices
   - Optimised preview not rendered using selected filetype (gif/jpeg/png) ie, all slices look like GIFs, and don't change when other selections are made
   - Selected slices do not "highlight" (outline) correctly, so you can't tell which ones you have selected
So by guesswork alone, you can still make selections and choices. The output is perfect, but working blind regarding the look and filesize quite defeats the purpose of the tool.
Now, the good news.
The above trick corrects the problem! Thank you ckocho!
Simply open the "Save for Web..." dialogue and change views from "Optimised" to "2-Up", "4-Up" and back to Optimised, and the problem is gone. No reinstall required, whew!
Dear Adobe, please look into a fix
Cheers,
Anthony

Distortion in Save For Web interface

Similar Messages

Maybe you are looking for