DME - it is not released for customers

Hi friends,
I am getting error when i am executing F110 with the help of DME. Payment document is generating but i am not getting the file which i have to send it to bank. This is the error i am getting it "Format tree 8301:DME FOR OUT GOING PAYMENT of tree type PAYM was delivered by SAP; however, it is not released for customers. SAP does not guarantee that the corresponding formats are mapped correctly for format trees with this status".
we are using SAP 4.7 EE version. Even i have gone through the SAP note. 656591. But i couldn't fine any help. Please help me if anybody faced the same kind of problem.
Thanks,
Rams.N

Use the keyboard shortcut Command + Option + Esc That will prompt the Force Quit window.
Or click Force Quit from your Apple menu  drop down menu.
Mac OS X: How to quit an unresponsive application using Force Quit

Similar Messages

The FM "DD_DOMA_GET" not released for 'remote' calls.

Hi,
When I try to import RFCs from my CRM system in XI, I am getting the following exception:
com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: The function module "DD_DOMA_GET" not released for 'remote' calls.
Solution please!!
Regards,
Mahesh.

Hi,
Making remote enabled will solve this,
see my reply(Anirban) and jacob's reply in this thread(although this was with idoc)
Unable to import SAP objects
For, We tried to make it Remote Enabled but it asks for "Access Key". How to go further?

You need a devloper access key for FM, in SE37
you can get one in market place, follow this thread,
Whats Development Key
Regards,
Anirban.

Function module WWW_ALV_CALL is not released for the Internet

Hi
I am facing this error Function module WWW_ALV_CALL is not released for the Internet and Only user SAP can release the function module.
Best Regards
GAGAN

hi,
This Web based calls are not available anymore in Netweaver 2004s/7.0.
More information in SAP-Note: 910202
Hope this helps
regards
Tobias

Save button on GUI does work in ver. 5, IE_Tab not released for ver. 5

I was recommended that I should be able to use FF - but the saving button on the GUI for the data portal does not respond and the IE_Tab is not released for the latest version FF
:-) Ole

IE Tab V2 (FF 3.5, 4, 5, 6, 7+) 3.5.9.1
* https://addons.mozilla.org/en-US/firefox/addon/ie-tab-2-ff-36/
IE Tab Support Forum
* http://getsatisfaction.com/ietab/products/ietab_ie_tab_2_for_firefox
* http://getsatisfaction.com/ietab/topics/ietab_on_firefox_5
Check and tell if its working.

SALES AREA IS NOT DEFINED FOR CUSTOMERS

dear All,
1.I got this error while creating Sales Order,
"Ship to Party x is not defined for Sales Area".
2. while creating Customer Master I got the following error.
"Sales Area xxxx 10 20 is not defined for customers,"
Can any body send soln ASAP.
Thanks and Regards
RAMS

Hi,
i think u have done this
Define Sales Area
SPRO
Enterprise Structure
Definition
Sales and Distribution
Maintain Sales Office
Go to New entries and define the sales office
Go to Address Icon and maintain the details and save it.
Now Maintainain Common distribution channel and common division. common distribution channel and division helps in sharing maste data effectively. Assure you have 10 sales areas. it will b painful process to define a customer at all these areas. instead, it will be wise to create a common distribution channe and division. this can be used as a ref dchnl and divn fo other dchnl and divns. then the master data can be effectivel shared
Go to Spro: Sales and distribution: Master Data : Define common division and disrtibution channel.
Hope this will help you.
Reward ?Point if helpful.
Thanks,
Raja

Query not release for OLE DB

Hi..Experts
I need to design a query say Q1, Its taking prod order through a replacement path Query Q2,which is
restricted by Cal month variable.
As i check Query Q1 for allow external uses, Its giving error " Query not releases for OLE DB"
But when I restrict Q2 by fixed month then there is no error....but this is not fulfill my requirement.
I need Q2 should be restricted by Cal Month variable...
What I have done is.....first I restrict Q2 by fixed month. then Q1 query executing perfectly.Once Q1
is executing again i restrict Q2 by cal mont variable. Then also Q1 is running fine, even though it is checked allow
external Access.
I also execute Q1 query in RSRT without using cache . It is working fine. But as I open Q1 on another day is not working, WHY?
I am not getting....Please help me...
your comments will be appreciated..
Edited by: Abhishek@maventic on Jul 8, 2011 3:10 PM

Check whether this helps you
[OLE DB for OLAP|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6a8eb390-0201-0010-8fa3-b70f6f9a17c1?quicklink=index&overridelayout=true]
thanks
G. Lakshmipathi

HCM Process&Forms EHhP5 "proces is currently not released for execution"

Hallo!
After changing the system to EHP5 i got a new error:
Process XYZ is currently not released for execution
I didn't change the customizing! What should i do? I cannot rember that a process is to activate anywhere.
The form and the interface are both active.
Thx for any help!
Best greetings,
Gregor

Hello!
Thx, i checked the SPRO. The valid checkbox is active.
In the backend system I am able to run the process. Before EhP5 we had EhP3 - is there any new customizing for the processes?
Thx and best greetings,
Gregor

SALES AREA MPPS MP LP IS NOT DEFINED FOR CUSTOMERS

At present I am working on integration of FI module with SD.When I am tryng to create Customer Master Record I am getting the error message "SALES AREA MPPS MP LP is not defined for customers".MPPS , MP , LP are sales org,dist channel,division created by me.Plase give solution.

Maintain common distribution channel & common division using transaction codes VOR1 & VOR2.

Sales area VNMH 01 02 is not defined for customers

Dear sir.
I have some questions, help me.
I'm creating a customer, but I have an error " Sales area VNMH 01 02 is not defined for customers".
I want to create plants, but I don't know the path.
Finanly, how to create branches, departments, storages
Help me deal the problem.
Thank you very much.
Regard,
Hangvt

Hi
Please Check Img>SD>master data-->Common dist. channel / division
Your Sales org with dist. channel/division will refered by some other dist. channel/division.
Kindly replace with urs.
example:
common dist. channel
ABCD AB AB
Common division
ABCD CD CD
Do like this and u will not get the error.
here we are assisning common reference dist. channel/ division for a dist. channel/ division
reward if helpfull
Muthupandiyan

Sales area JI00 JI JI is not defined for customers

i created enterprise struv for SD
DIVISION     JI
Plant     JI00
Sales Organisation     JI00
Dist Chan     JI
Divi     JI
Sales Office     JI00
Sales Grp     JI0
Stor Loca     JI00
Shipping Point     JI00
Company Code     0001
and all necessary assignmnets done successfully and consistency chk also , it is OK'
now i am creating custoemr in XD01 then i got an error as Sales area JI00 JI JI is not defined for customers
pls guide me wat to do, i am not done any other settings except i mentioned

Hi,
please check the following customizing:
- transaction SPRO
> SAP Customizing Implementation Guide
> Enterprise Structure
    > Assignment
      > Sales and Distribution
        > Assign sales office to sales area
> Sales and Distribution -> Master Data
          > Define Common Distribution Channels and Common Division.
- Transactions need to also be checked and maintaained if neccessary:
     -> OVXG: Define sales area
     -> VOR1: Joint Master Data: Distr. Channel
     -> VOR2: Joint Master Data: Distr. Division
Kind regards,
Zsuzsanna

Sales area ABCD CB AB is not defined for customers

Hi Guru,
              When I was trying to create customer T-CODE: XD01
Getting following error:
Sales area ABCD CB AB is not defined for customers
I am working on ECC6.
could you please help me out?
Regards,
sha

Hi
Please Check Img>SD>master data-->Common dist. channel / division
Your Sales org with dist. channel/division will refered by some other dist. channel/division.
Kindly replace with urs.
example:
common dist. channel
ABCD     AB     AB
Common division
ABCD    CD      CD
Do like this and u will not get the error.
here we are assisning common reference dist. channel/ division for a dist. channel/ division
reward if helpfull
Muthupandiyan

"Sales Area zzzz zz zz is not Defined for Customers"

Hi All
         I am trying to create a customer using XD01. In my org structure there is only one sales org, one dist channle, one division and hence One Sales Area zzzz zz zz which I have set up in IMG. The Error I am getting is
"Sales Area zzzz zz zz is not Defined for Customers"
And Peformance Assistant gives the following message
Message no. F2644
Diagnosis
The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
Procedure
You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
I have already checked that
1)My Sales area has been defined and Sales org is assigned to company code, Dist Channel and Division is assigned to Sales Org
2)In Table TVTA my Sales Area Exist...
3)I have tried creating my sales org by copying IDES sales org as well as creating a NEW sales org...however the error is still there
Any Ideas???
Thanks
Raj

Hi!
   This error is coming due to assinment is not made for common Divisions. You can assign this by going to SPRO>S&D>Define common divisions. Here you assign sales org ZZZZ , division ZZ, division for conditions ZZ, division for Customers ZZ. Then try to create customer master for ZZZZ ZZ ZZ .
This assignment for master data can be created in one sales area and that can be referenced to other sales areas also without creating again.Read the help below for details.
Define Common Divisions
     In this step, you define the divisions that common master data should
     apply to. The definition is valid within each sales organization.
     Example
     You can determine, for example, that the conditions which are valid in
     division "01" also apply to divisions "05" and "06".
     Note
     The common master data across various divisions refer to the conditions
     and the customer master data.
     You thus minimize the effort of entering and managing master data.
     In addition, you can extrapolate your own statistics per division
     without having to create master data in the different organizational
     subareas.
     Action
     For the divisions, define from which other division the master data
     should be copied.

DME file issue: Payment run for Customers

Hi Gurus,
Please help me in the following problem.
I have done the configurations for automatic collection/refund using F110 for customers in our ECC 6 system. Iu2019m having a requirement as below.
1. Singular payments to be made for each customer transaction.  Have done that by checking u2018Singular paymentsu2019 check box in customer master data.
2. All payments should be collected in DME file at customer level even though the payments are multiple.  have done that by customizing the RFFOGB_T program.
3. Configurations are done for incoming (Receivables) and outgoing payments (refunds) in SAP and working fine.
Now the problem is, there is a requirement to net-off the monetary value of a customer in DME file i.e. if a customer having debits and credits then we need to net off the amounts and check whether itu2019s an incoming or outgoing payment to that customer. I have done the code changes for this requirement as well and it is working perfectly fine, however DME file produces 2 CONTRA lines one as debit to bank account and another as Credit to bank account (provided I have 2 customers in a run where one customer ends up in net debit balance, and another customer ends up with net credit balance). Our Bank doesn't accept more than one CONTRA in a single DME file.
Example scenario:
Customer1
Booking 1 -> 400 (Dr) & 200 (Cr)
Booking 2 -> 300 (Dr) & 100 (Cr)
Customer2
Booking 3 -> 100 (Dr) & 300 (Cr)
Currently If I run the payment run by having both incoming and outgoing payment methods, then my DME file will result as below
Customer 1 -> Dr 400
Customer 2 -> Cr 200
Bank account -> Cr 200
However our bank is not accepting the above DME since there are debits as well as credit data records in the same file.
Currently we are going with 2 separate payment runs, one for incoming and another for outgoing by this I could able to produce 2 DME files as below for the above customer bookings.
Payment run 1:
DME 1:
Customer 1 -> Dr 700
Customer 2 -> Dr 100
Bank account -> Cr 800
Payment run 2:
DME 2:
Customer 1 -> Cr 300
Customer 2 -> Cr 300
Bank account -> Dr 600
Both files are being accepted by Bank, however business is not agreeing this since for every customer transaction bank charges client. (There will be 2 transaction for same customer in the same day)
Anybody encountered the same problem? I need some suggestion on how to produce 2 DME files in a single payment run, one having only net debit balance customers and another having only net credit balance customers, so that on a particular payment run a customer will have only one transaction going into bank either Credit or Debit. Basically I need to produce DME files as below for the above customer bookings
Payment Run 1:
DME 1:
Customer 1 -> Dr 400
Bank account -> Cr 400
DME 2:
Customer 2 -> Cr 200
Bank account -> Dr 200
Please help.

Client has a difft scenario.
They pay to the customers for warranty and incentives. 2 ways to pay to the customer: generating payment run F110 within AR and the other being F110 from AP where all the customer open items are closed and sent to AP for payment using a custom program.
The problem with this is they have two interfaces each from AP and AR and aslo a custom program.
Now, solution is to pay all customers thru AP by setting each customer as vendor so that all the open items are picked in the payment run.
Next solution is to have single interface but paymentruns seperately from AR and AP. Both would send the files differently to Bank when paymnt run executed. Concern here is when both Ar and AP send files will the interface be able to handle it like 2 difft files or should there be any consolidation kind of thing.
Another question is, do we have to set up all customers as vendors in order to pay to the customer thru AP. There is customer accounts field where range of customer accounts can be added. Just by adding customer accounts, does it pick up the items for payment.
Please reply.
Satya

Why are my Flash Videos now not playing for customers outside my Domain?

Hi folks. Please help me out here. I'm using Adobe Connect v.
6 Presenter to develope technology enabled learning. I've published
several Flash Video files to my TEL server, which hosts Connect
v.6. They were able to viewed by students outside my USGS domain
and since about the middle of March, the videos will not start for
them. What the heck? If anyone can help me, I'd be much obliged as
I am do to start beta testing on a Presenter TEL course on May the
8th! Yikes!!
Also, my server is in an Active Directory structure where
Windows Downloads and patches are automatically loaded at a certain
time in the early morning. Not sure if a security patch is doing
this or not, but I would gratefully appreciate any assistance.
Thank you!!

wolfeyes...
Not sure if this is the case...but, by chance, did you change
the videos to a different version of flash? Say converted to flash
8 versus flash mx. I know that in prior versions of connect, you
had to have MX as Flash 8 video wouldn't play...If they're the very
same video files that suddenly aren't playing...then I have no
answer...
Peace.

DD_DOMA_GET" not released for 'remote' calls : Advice required

Hi,
This is one of the common messages that I(and many SDN'ers) received when I tried to deploy my application in WAS SP12.
I read the messages and it was quite obvious, that DD_DOMA_GET needs to be RFC enabled and this would work fine.
However, I also noticed a colleague of mine who could deploy applications without receiving this error. He has a model in his program and he tries to execute the function module as well in his Web Dynpro program and had absolutely no issues.
When I tried, I received the above error, constantly. I compared his program and mine and found a subtle difference. The view controller - context attributes were structurally bound in my case, and in his case, he used standard types as string, boolean etc... Therefore, I concluded that every time my application tries to execute, it sees a com.xx.app.type.ModelField for a view - context attribute , it uses the JCo Destination WD_RFC_METADATA_DEST and calls function module DD_DOMA_GET. It fetches the type and length of the field. In this case, DD_DOMA_GET is not RFC-enabled and therefore returns with an exception.
My question is : is this workaround i.e. to not use structure binding for context attributes of a view and use simple fields like string, boolean etc. beneficial ? What are the drawbacks of this workaround ?
Best Regards,
Subramanian V.

Good point, Valery and what you assume is also right. We used a particular SAP System where DD_DOMA_GET was RFC-enabled and then changed JCo destinations.
I am not clear with your second point and in relation with my question in particular.
The two points that I made in my first and second post(I should have made them in the same post, sorry about that) are required to not get that error.
a) Type of View->Context->Value Attribute should not refer to model(for e.g. com.aq.model.types.xubname) , especially when there is a UI Element binding
b) Custom Controller should be bound to model and not component controller
I am not even fully sure if there are any other preconditions to avoid the DD_DOMA_GET error, but I tested with the above 2 points and my program also gets executed properly.
From your point:
Next, using Adaptive RFC model in described manner is almost the same as using SAP Enterprise Connector instead while any dictionary-related functionality is not used (see
Re: Poll : SAP Enterprise Connector , second item in list)
I understand that, if I follow points (a) and (b) as mentioned above, I am "almost" using the concept of Enterprise Connector, except for dictionary usage.
What intrigues me is why the distinction between component and custom controller(for failure - DD_DOMA_GET) and more importantly, the method that we are currently using, is it safe ?
Best Regards,
Subramanian V.

DME - it is not released for customers

Similar Messages

Maybe you are looking for