Do load test for application installed in Weblogic 10.3.4 using OATS 9.31

Hi Friends,
I need to do a load test for my application deployed in Weblogic 10.3.4. I went on to use the Oracle Application testing Suite (OATS 9.31). But it says its compatible only upto Weblogic 10.3.3. So pls advice me to find a way to load test my oracle fusion application deployed in the current server.
Thanks and regards,
Vijai

Hi,
Maybe worth also trying the WLS forum for what folks over there use: WebLogic Server - General
Frank

Similar Messages

Load testing JSF application

Is there any tool to load test JSF application created with JSC?
Can we use the load testing feature in Java Studio Enterprise to test JSF application created with JSC?

Any tool designed to perform load-based testing of a web application will work.
// Gregory

Load Testing for IMS 5.2

hi,
is therer any tools available for load testing for ims 5.2? Can mailstone be used? Understand that this is used in NMS 4.x
thxz
cheerz
marxz

There is no offically supported load testing tools that I am aware of. You are correct that mailstone was shipped with NMS. I have used mailstone, once, but could not figure out what the thing was trying to do. I think it is badly written and the documentation is extremely lacking, IMHO.
Being that iMS follows Internet standards you can use any testing tools that also follow those Internet standards. I've not researched to know if load testing tools exist for mail servers or not, certainly someone has done it.

Performance and Load testing for Agentry applications in SMP2.3

Hello Experts,
We have a requirement to carry out the Performance and Load testing for our SAP Work Manager application (SMP2.3).
Please guide me if ATE (Agentry Test environment) / Jmeter / or any other testing tool can be utilized for the same.
Would be great if you could provide me the steps / references for the same.
Thanks,
Abhishek

Hi Abhishek,
Please refer this document Agentry - Assets for Admins & Architects. It has very good content which explains about performance testing and performance tuning.
Rgrds,
Jitendra

The application "install mac os x" cannot be used from this volume

I have an older 2008 macbook, with leopard, I am trying to download snow leopard and when i try to install I keep getting the message, "the application "install mac os x" cannot be used from this volume". Can someone please help

There is no way to download the upgrade to Snow Leopard.
What you are downloading are updates.
In order for the update to work your Mac must have Snow Leopard installed first.
The only way to upgrade to Snow Leopard is to purchase the Snow Leopard DVD from Apple Online.
Allan

Require Help on Load Testing for Oracle Applications

Hi,
I have to do a Load Testing on Oracle Application 11i. I am not able to understand from where do I need to start.
Could any one please help on this ?
Ramu.

The tool which I am using for this is "Oracle Application Testing Suite".
Any help welcome !
Ramu

ATS load testing for E-Business Suite using IE8 issue

Hi,
I am trying to record a load testing script using Oracle Application testing SUite for E-Business Suite R12.1.3 application. When I start recording I get a pop up asking me to change/disable XSS filter in IE8. I have altready done that and restarted the browser. But the same pop up message comes up.
My queries are:
1) Is ATS 9.3 supported for use with Internet Explorer 8? I am using Windows 7
2) How can I overcome this issue so that I can records EBS script in openscript.
I have run the runDiagnosis.bat file under openscript install folder and the output is as follows:
10:40:17,892 INFO [Application] Log files stored in: C:\OracleATS\logs\odt
10:40:17,905 INFO [DiagnosisExecutor] Starting diagnosis...
10:40:17,908 INFO [DiagnosisExecutor] Log files for all diagnosis categories are stored in: "C:\OracleATS\logs\odt"
10:40:18,105 INFO [DiagnosisExecutor] Environment Info - Date Tue Oct 11 10:40:17 BST 2011
Windows Vista 6.1 , x86
OpenScript
Internet Explorer 8.0.7600.16385
FireFox 7.0.1
10:40:18,108 INFO [DiagnosisExecutor] Openscript install directory: C:\OracleATS\openScript
10:40:18,117 DEBUG [DiagnosisExecutor] Diagnosing Oracle EBS/Forms Functional Testing - Forms FT Diagnoser
10:40:18,532 ERROR [Forms FT Diagnoser] JInitiator was not found on the system.
10:40:18,537 INFO [Installer] JRE option cache is available: false
10:40:18,541 ERROR [Installer] Failed to backup JRE options! FormsFT helper installation will continue...
java.io.FileNotFoundException: C:\Users\Rian\AppData\Roaming\Sun\Java\Deployment\deployment.properties (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.oats.scripting.modules.forms.common.utility.FileUtility.copyFile(FileUtility.java:26)
     at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatchImpl(Installer.java:119)
     at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatch(Installer.java:105)
     at oracle.oats.scripting.modules.forms.common.helperInstaller.WindowsInstaller.installJREPatch(WindowsInstaller.java:68)
     at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.doInstall(Installer.java:75)
     at oracle.oats.scripting.modules.formsFT.common.api.internal.helperInstaller.InstallerManager.doInstall(InstallerManager.java:130)
     at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.checkFormFTHelperInstallation(FormsFTDiagnoser.java:141)
     at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.diagnose(FormsFTDiagnoser.java:50)
     at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:146)
     at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:90)
     at oracle.oats.scripting.diagnosisTool.Application.runSilently(Application.java:191)
     at oracle.oats.scripting.diagnosisTool.Application.run(Application.java:90)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.eclipse.equinox.internal.app.EclipseAppContainer.callMethodWithException(EclipseAppContainer.java:574)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:195)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
     at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
     at org.eclipse.core.launcher.Main.main(Main.java:30)
10:40:22,867 WARN [Installer] FormsFT Helper is installed without cache
java.io.FileNotFoundException: C:\Users\Rian\AppData\Roaming\Sun\Java\Deployment\deployment.properties (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.oats.scripting.modules.forms.common.utility.FileUtility.copyFile(FileUtility.java:26)
     at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatchImpl(Installer.java:193)
     at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatch(Installer.java:105)
     at oracle.oats.scripting.modules.forms.common.helperInstaller.WindowsInstaller.installJREPatch(WindowsInstaller.java:68)
     at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.doInstall(Installer.java:75)
     at oracle.oats.scripting.modules.formsFT.common.api.internal.helperInstaller.InstallerManager.doInstall(InstallerManager.java:130)
     at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.checkFormFTHelperInstallation(FormsFTDiagnoser.java:141)
     at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.diagnose(FormsFTDiagnoser.java:50)
     at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:146)
     at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:90)
     at oracle.oats.scripting.diagnosisTool.Application.runSilently(Application.java:191)
     at oracle.oats.scripting.diagnosisTool.Application.run(Application.java:90)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.eclipse.equinox.internal.app.EclipseAppContainer.callMethodWithException(EclipseAppContainer.java:574)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:195)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
     at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
     at org.eclipse.core.launcher.Main.main(Main.java:30)
10:40:22,936 INFO [Installer] JRE option cache is available: false
10:40:24,044 DEBUG [DiagnosisExecutor] Diagnosed Oracle EBS/Forms Functional Testing - Forms FT Diagnoser. Analyzing results.
10:40:24,063 DEBUG [DiagnosisExecutor] Diagnosing Sun JRE Version 1.6.0_24
10:40:24,077 DEBUG [DiagnosisExecutor] Diagnosing Forms FT Helper Installation
10:40:24,080 DEBUG [DiagnosisExecutor] Diagnosing Web Functional Testing - IE Helper
10:40:24,238 INFO [IEBhoUtil] DotNet Framework found. Version is 4.0.30319
10:40:24,404 INFO [RunCommand] [Cmd execute] cmd.exe /C C:\Windows\Microsoft.NET\Framework\v4.0.30319\regasm.exe
10:40:26,187 INFO [IEBhoUtil] DotNet Framework works well.
10:40:26,318 INFO [IEBhoUtil] OpenScript IE Toolbar/BHO is found.
10:40:26,458 INFO [RunCommand] [Cmd execute] cmd.exe /C "C:\OracleATS\openScript\Oracle IE ToolBar\OpenScriptToolBar.exe"
10:40:27,357 ERROR [IEBhoUtil] Run Oracle IE Toolbar error:Attempted to perform an unauthorized operation.
10:40:27,594 INFO [IEBhoUtil] IE Enhanced Security Administrator Setting: null
10:40:27,675 INFO [IEBhoUtil] IE Enhanced Security Users Setting: null
10:40:27,677 INFO [IEBhoUtil] IE Enhanced Security Settings Disabled
10:40:27,681 DEBUG [DiagnosisExecutor] Diagnosed Web Functional Testing - IE Helper. Analyzing results.
10:40:27,683 DEBUG [DiagnosisExecutor] Diagnosing .NET Framework
10:40:27,685 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Installation
10:40:27,686 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Accessibility
10:40:27,687 ERROR [DiagnosisExecutor] Failure found when diagnosing Web Functional Testing IE Helper
10:40:27,689 DEBUG [DiagnosisExecutor] Trying to fix IE Helper Accessibility
10:40:27,691 INFO [IE Helper] Try to fix an issue: IE Helper Accessibility
10:40:27,860 INFO [IEBhoUtil] OpenScript IE BHO/Toolbar has been enabled.
10:40:27,864 INFO [DiagnosisExecutor] Auto-fixed IE Helper Accessibility
10:40:27,866 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Conflict
10:40:27,869 DEBUG [DiagnosisExecutor] Diagnosing IE Zoom Factor
10:40:27,871 DEBUG [DiagnosisExecutor] Diagnosing IE Enhanced Security Setting
10:40:27,982 DEBUG [DiagnosisExecutor] Diagnosing Web Functional Testing - Firefox Helper
10:40:28,076 INFO [FFExtUtil] OpenScript WebDom Firefox extension is already installed.
10:40:28,156 INFO [FFExtUtil] OpenScript WebDom Add-on is compatible with the installed Firefox 7.0.1
10:40:28,174 INFO [FFExtUtil] Firefox profiles are found.
10:40:28,179 INFO [FFExtUtil] Firefox profiles are found.
10:40:28,182 DEBUG [DiagnosisExecutor] Diagnosed Web Functional Testing - Firefox Helper. Analyzing results.
10:40:28,191 DEBUG [DiagnosisExecutor] Diagnosing Firefox Helper Installation
10:40:28,193 DEBUG [DiagnosisExecutor] Diagnosing Firefox Version
10:40:28,199 DEBUG [DiagnosisExecutor] Diagnosing Firefox Helper Accessibility
10:40:28,201 DEBUG [DiagnosisExecutor] Diagnosing Reset Firefox content preferences.
10:40:28,207 DEBUG [DiagnosisExecutor] Diagnosing Operating System - WebDom Platform Diagnosor
10:40:30,798 DEBUG [DiagnosisExecutor] Diagnosed Operating System - WebDom Platform Diagnosor. Analyzing results.
10:40:30,801 DEBUG [DiagnosisExecutor] Diagnosing Environment Variables
10:40:30,803 DEBUG [DiagnosisExecutor] Diagnosing IE Toolbar/BHO Remover
10:40:30,806 DEBUG [DiagnosisExecutor] Diagnosing Oracle EBS/Forms Load Testing - Forms LT Diagnoser
10:40:31,647 DEBUG [Forms LT Diagnoser] Proxy settings for Sun Java 1.5 and higher are set correctly to "Use Browser Settings". Proxy settings for older versions of Sun Java and JInitiator should be manually verified.
10:40:31,650 DEBUG [DiagnosisExecutor] Diagnosed Oracle EBS/Forms Load Testing - Forms LT Diagnoser. Analyzing results.
10:40:31,654 DEBUG [DiagnosisExecutor] Diagnosing IE8 XSS Security Settings
10:40:31,655 ERROR [DiagnosisExecutor] Failure found when diagnosing Oracle EBS/Forms Load Testing Forms LT Diagnoser
10:40:31,659 DEBUG [DiagnosisExecutor] Trying to fix IE8 XSS Security Settings
10:40:31,671 ERROR [DiagnosisExecutor] Did not auto-fix the problem.
10:40:31,674 ERROR [DiagnosisExecutor] Suggestion for fixing: Local intranet: XSS Filter is disabled
Trusted sites: XSS Filter is enabled
Internet: XSS Filter is disabled
Restricted sites: XSS Filter is enabled
To Change setting:
Go to Tools > Internet Options and Choose Security Tab
Select the Zone to modify and Press Custom level
Find Enable XSS filter Setting - Select Disable and click Ok
10:40:31,680 DEBUG [DiagnosisExecutor] Diagnosing Sun Java proxy settings
10:40:31,683 DEBUG [DiagnosisExecutor] Diagnosing Helper Service - Helper Service
10:40:32,282 DEBUG [DiagnosisExecutor] Diagnosed Helper Service - Helper Service. Analyzing results.
10:40:32,284 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Installation
10:40:32,287 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Status
10:40:32,289 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Connection
10:40:32,612 DEBUG [DiagnosisExecutor] No Eclipse configuration .log file available.
10:40:32,774 INFO [DiagnosisExecutor] Diagnosis Complete.
Please advise.
regards
CP

Hello
1/ ATS 9.3 is supported with IE8, not IE9 at the moment
2/ Did you disable xss settings for the four different security zones?
You can also try to add the EBS url to the trusted sites and disable xss settings for that zone only.
Let us know and good luck
JB

How can I do the load test for EBS 11i

Dear Suport
I start to try OATS.
I have used a Openscript to record the functional test and it works fine for EBS 11i.
However, I cannot directly use the script from Functional Test. Is there have any ways to convert the Functional Testing script to Load Testing script?
Since the fail of using functional script, I create a new Load Testing script in Openscript and record what I do in functional test. However, I got the below error when I record the script.
!ENTRY oracle.oats.scripting.modules.http.proxyRecorder.ProxyRecorderQueueRunnable 2 0 2010-01-06 11:42:07.354
!MESSAGE Could not determine request character set for http://localhost:8088/olt/ConnectToServer.do, referer=http://localhost:8088/olt/BuildScenario.do
!ENTRY oracle.oats.scripting.modules.browser.api.javaHelper.Installer 4 0 2010-01-06 11:42:58.678
!MESSAGE formsRecorder.jar does not exist in C:\Program Files\Java\jre6\lib\ext
I have tried to copy the file, formsRecorder.jar, from C:\OracleATS\OpenScript\openscript_configuration\org.eclipse.osgi\bundles\56\1\.cp\lib to C:\Program Files\Java\jre6\lib\ext
However, the file, formsRecorder.jar, will be deleted when record the test by openscript. (Antivirus too is disabled during record the script).
Do you have any idea for record the Load Testing script by Openscript?
Regards
Sidney Wong

Try the trial version of HTML Optimizer - it will optimize 50% of your files and may convince you that optimizing is your best chance to get your site to load in IE unless you want to drastically reduce your page file sizes.

Testing for applications associated with a file type

Dear contributors,
while trying to open a simple *.txt file via java.awt.Desktop.open(File)
the IOException is thrown. According to Javadoc there is "no associated
application or the associated application fails to be launched" in this
case. Interestingly the Desktop class does not provide methods to test
for particular file type registration, just for the "support" of a generic
Desctop.Action. Colud you please illuminate how to check, whether a file
extension / file type / mime type has an associated application in a platform
(in)dependent way at least for "opening" ?
OS: Linux, 2.6.24-22-generic, x86_64
JDK: 1.6.0_07, 64 bit
Many thanks
Jaro Pullmann

If you make the call and an exception is thrown, then there is not application associated with the file type--otherwise I believe you need to do some registry work if you do not want a pretest.

Server load balancing for application access using multiple servers

1.what are the methods supported by cisco switches for load balancing
2. I want to achive users to access 1 particular ip from different locations but phsically few servers which handle the application and data

well some servers allow you to install routing protocols on them. you could OSPF some links together.
or you could NLB if it is a microsoft server. this uses a heartbeat network, a virtual mac and an IP address bound to the vmac.
you could use NIC teaming. broadcom nics on dell servers allow you to configure them for loadbalancing, failover and a few other options.
or if the servers are mirrored using MSCS or something similar (i.e configured the same but independant) you could just load balance using DNS.
hope this helps. jsut some ideas quickly off the top of my head

I need to create dock icons for application install using packagemaker

Hi all,
I am using Packagemarker to create an install for our corporate MS Office 2011 software but I need to be able to add the apps to the dock as well. Could use applescript if packagemaker is not the right app for that!
Anyone know how to accomplish this pls.
Thanks
Bill

Here is a suggestion: http://forums.macrumors.com/showthread.php?t=344100

Turn Off Admin Password for Application Install

Hi guys, I am setting up a PPC G4 for a friend and have installed OSX 10.5.8 on it and would like to make it as simple to use as possible. One thing I would like to do is remove all those 'Enter your username and password' dialogs that appear every time you install something. Is this possible? If so, how?
Cheers

It's not possible: it's there for your protection. For example, if you hit some malware that tried to install something it would bring this up to warn you.

Load Tests for (Desgin issue, Servlets with EJBs in real life?)

I have a very light java program that makes an HTTP connection to a servlet
on the WLS,
it uses the GET method for that, and reads the response from the server, it
logs the time that passes from just before opening the HTTP connection and
right after finishing reading the response. Below is the code snippet for
that:
url = new URL(sURL);
start = getCurrentTime();
URLConnection conn = url.openConnection();
conn.connect();
readResponse(conn.getInputStream());
end = getCurrentTime();
There is a second piece that controls the HTTP connections, it is a separate
java program that creates
the HTTP connection process as many times as desired in a loop and waits for
a specific period of time between every fork of the process (values I used
are 0ms, 3 ms, 30ms etc), you can think of this as arrival rate for the
requests to the server. Below is the code snippet that does this :
for(int i=0; i<nNumOfHits; i++) {
Runtime.getRuntime().exec(HTTP_conn_command);
Thread.sleep(nInterval);
I used WLS 5.1, on a pentium III 866 Mhz., Windows 2000 Pro, with 512 Mb
Ram,
tests are done locally, (WLS and the client programs run on the same
machine),
after each test I refresh the server to be accurate.
With the Servlet + Java approach what the servlet does is to instantiate a
Java Object and
call an Init method on the object passing the HttpServletRequest to it, and
call the
corresponding setters, that's it. There are 7 paramaters which are all
strings, so 7 setters are called.
The Servlet + EJB approach does the same thing, but encapsulates the above
implementation in a single business method of a stateless session bean. Home
interface is created in Init() method of the servlet,
so it is used over and over again.
Any comments on this, greatly appreciated,
thanks,
ali.

I have a very light java program that makes an HTTP connection to a servlet
on the WLS,
it uses the GET method for that, and reads the response from the server, it
logs the time that passes from just before opening the HTTP connection and
right after finishing reading the response. Below is the code snippet for
that:
url = new URL(sURL);
start = getCurrentTime();
URLConnection conn = url.openConnection();
conn.connect();
readResponse(conn.getInputStream());
end = getCurrentTime();
There is a second piece that controls the HTTP connections, it is a separate
java program that creates
the HTTP connection process as many times as desired in a loop and waits for
a specific period of time between every fork of the process (values I used
are 0ms, 3 ms, 30ms etc), you can think of this as arrival rate for the
requests to the server. Below is the code snippet that does this :
for(int i=0; i<nNumOfHits; i++) {
Runtime.getRuntime().exec(HTTP_conn_command);
Thread.sleep(nInterval);
I used WLS 5.1, on a pentium III 866 Mhz., Windows 2000 Pro, with 512 Mb
Ram,
tests are done locally, (WLS and the client programs run on the same
machine),
after each test I refresh the server to be accurate.
With the Servlet + Java approach what the servlet does is to instantiate a
Java Object and
call an Init method on the object passing the HttpServletRequest to it, and
call the
corresponding setters, that's it. There are 7 paramaters which are all
strings, so 7 setters are called.
The Servlet + EJB approach does the same thing, but encapsulates the above
implementation in a single business method of a stateless session bean. Home
interface is created in Init() method of the servlet,
so it is used over and over again.
Any comments on this, greatly appreciated,
thanks,
ali.

HT204135 I can't load software for my Cannon MP810 I get amesage to use system/library/Extensions/RTL8187Bl.kext

Please advise how I can install Cannon MP810 preinter software I got a message failed System/library/Extensions/RTL8187Bl.kext

Are you still using some sort of network usb dongle.
That kext is for some network device and it apparently wasn't written correctly. If you're not using it, uninstall the device software using the manufacturer's uninstall utility.
If you are using it, contact the manufacturer and see if they have an update that works correctly in Lion.

I am doing browser testing for the different firefox versions. Shall I use only the latest version to cover the lower versions?

I heard that if i test using the latest firefox version which is 32, it would be sufficient and I do not need to test the older versions e.g., 26, 27, 28, 29, 30, 31.
Is that a correct assumption?

You may want to test with the Firefox 24 ESR and Firefox 31 ESR version as those are still supported with security updates.
Firefox 24.8.0 and 31.1.0 ESR:
*https://www.mozilla.org/en-US/firefox/organizations/all.html
*https://www.mozilla.org/en-US/firefox/24.8.0/releasenotes/
*https://www.mozilla.org/en-US/firefox/31.1.0/releasenotes/

Do load test for application installed in Weblogic 10.3.4 using OATS 9.31

Similar Messages

Maybe you are looking for