Do not allow change of Reference Object after Order release

Dear All,
The requirement is that we should lock(not able to change) the Reference Object after the Maintenance Order is released. Can we acheive this in standard way or do we need to go for development.
If going for development what should be the basic logic.
Regards,
MLN Prasad

Prasad,
You are accomplishing the same utilizing the built in enhancement framework([Implicit enhancements|http://help.sap.com/saphelp_nw70/helpdata/en/70/63da4023a28631e10000000a1550b0/frameset.htm]), WITHOUT making a MODIFICATION to the system. This technology / functionality is available from ECC 6.0 . You would need to be very careful in using the implicit enhancement functionality so that you don't break the flow. Your requirement seems to be a simple one which could be accomplished by tweaking the screen attributes of the field under certain conditions, for this specific screen in the program. You may also have to make the Priority field a display only, so that it doesn't trigger a change through it via the user exit or through standard.
Regards
Narasimhan

Similar Messages

System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_30

hi,
Recently we upgraded our BW system from BW 3.0B to BW 3.5.In BW 3.5,we created a planning area to which we
assigned a transactional cube.Now when we are going for creating variables or planning levels for the planning area it
gives the following error:
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_300ZPLAN
Our support packages are as following:
SAP_BASIS       640                   0009
SAP_ABA         640                   0009
ST-PI           2005_1_640            0000
PI_BASIS        2004_1_640            0006
SAP_BW          350                   0009
BI_CONT         353                   0000
Could you please suggest or help us in resolving the issue ?
thanks and regards,
Yogesh

Hello,
the above mentioned note is too old. Please check note 781371.
Please also check in transaction SM30 view V_TRNSPACE
the record for /1SEM/:
Namespace:     /1SEM/
Namespace role C
Repair License
SSCR Popup     X
SAP Standard   X
Gen Objs Only X
Regards,
Gregor

Not allowing changes to payment terms after the AR document is released to accounting

Hi,
Anyone know the best way to not allow a user to change the payment terms after the AR document has been created in AR? This is affecting aging because users are changing the payment terms without permission. What is the best way to control that?
Thank you.
AK

Hi A K
Frequent change in payment terms is something business should introspect. Payment term is decided and agreed upon with customer/vendor during the initial stages.
However from IT perspective, it can be controlled keeping some system controls.
1. Limit the Customer master change transaction to very limited users or to a manager. There should be internal approvals by management for business to make a change. Bring this into force.
2. Regularly run the customer master change reports and provide the trend to management to restrict or limit the changes.
3. Use Change Message control for master data by providing necessary warnings or error messages when master data is changed.
4. In the sales order level, there is every possibility to change the payment term. Based on the user authorization get the payment term field greyed out and provide change access to accounting or to a specific user upon approvals. This is a bit complex process but I feel this brings up controls and stops the process from exploitation.
5. Also activate 'Sensitive fields' KNB1-ZTERM for payment term field in customer master. This brings up another layer of confirmation of change by other users.
6. Another back route, not recommended in all cases, is to subsititute the required payment term during accounting document posting.
Hope it helps.
Thanks,
Sekhar

How to fix acrobat 9.4.1 NOT to change position of objects after editing in Illustrator?

Everyday I use the editing capabilities of Acrobat, with the ''Touchup Object Tool''. With objects, it opens in Illustrator, it's fantastic what you can do. A few days ago, I let Apple upgrade my OS from 10.6.4 to 10.6.5 (in fact, it is the second workstation at my work place, that's having the same problem). The problem is the following... When editing an object with that tool, saving back into the PDF file forces the position of that object to change, it shifts about half of an inch to the right and above. I don't see how I can fix this. Anybody has a solution?

no bug - most likely it is user error but only you know what has gone on
In anycase there have been virtually no reports of this - it is extremely unlikely to be a bug - and virtually zero chance that Apple will be fixing your problem
LN

Change of Reference Object

Hi All,
We have some infoobjects (A) created with referencing objects (B). In our production system we noticed that the referncing object is not correct. We have been loading the data since a year. This issue was noticed recently.
We need to modify all the objects (A) to point to a new infoobject (C) instead of B. BW do not allow changing the reference objects unless we delete the data in all connected data targets. We are talking about at least 15 data targets.
To modify the refernce from A to C, we have to delete and re-load the data in production system. We want to keep this as the last option and explore the alternatives. We are not ready for deleting and reloading the data since it calls for lot of man hours and planning. Ours is a 24x7 system.
We are considering many alternative approaches and work around solutions. I will be interested to know, if anybody else also faced this situation and if so, how did they fix the issue. I appreciate any ideas in fixing this issue.
Thanks
Surya Muvvala
480.225.9666 (cell)

Hi Surya,
check out the oss note 0568051 for your issue. It describes, what to do in case you will change the reference.
Siggi

System setting does not allow changes to be made to object LSYS

Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammed

Dear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding

System settings does not allow changes to be made to object

Hi,
In one of my test system, when i tried to change the object its displaying following error message.
System settings does not allow changes to made to the object.
I have checked the settings in se03, regarding modification objects of software components and namespace those are in state of modifiable for this namespace object.
I would like to know, how to change the object in the namespace.
Regards
Srikanth

Hi,
In SE06, in addtion to system status and component status, check the namespace status too.
It would be better if you know the namespace of the object you are trying to modify. Set it to modifiable and retry.
To find namespace, open the object in SE80 and check the attributes. It would show assigned package, namespace, component etc.
Regards,
Srikishan

System setting does not allow changes to be made to object

Hi experts,
I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
"System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.

Hi,
If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
Or you can find the text in the note:
«/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
Regards,
André Nunes

"Create delivery" not allowed (Sys. status Cost, object VB0000000237000010)

Dear All,
While creating delivery i am getting the error saying as below,
"Create delivery" not allowed (Sys. status Cost, object VB0000000237000010). and allowing me to the process delivery. we are the scenario for make to order process.
please suggest the solution.
kamlesh panchal

Not clear on your comments
Create delivery "not allowed" (Sys. status Cost, object
VB0000000237000010). and "allowing me to the process delivery"
When the error message says creating delivery is not allowed, then how are you able to process delivery.
Nevertheless, go to VA02, input the sale order reference and execute. From top menu bar, click on "Goto -- Header -- Status". There again click on "Object status" and check whether any lock is there. If so, change it and then retry
thanks
G. Lakshmipathi

Disk utility does not allow to restore Macintosh HD after I deleted a small size (1GB) partition

Hi, when I tried to create a new 1GB partition (on my Mac mini 2011, using Mac OS X 10.7.3) and then to delete it I could not restore (increase) Macintosh HD size using Disk utility (diskutil list shows the same value for Macitosh HD (498,17GB) partition before and after I deleted a new created 1GB partition).
Please help, how I can restore the original size of Macintosh HD when Disk utility does not allow to restore Macintosh HD after I deleted a small size (1GB) partition?
Thank you.

The bottom right corner dragging does not help in my case, because it shows that Macintosh HD partition size is maximal, but its real size did not change after I removed 1GB partition.
Maybe any other idea can help me, for example some built-in tool like diskutil which allows to view and manage unused partitions in terminal?
Thank you.

Wild Cards are not allowed for this info object

Hello Experts,
I am getting some problem, when I trying to find the some selections for info object in variable selection screen; it giving some error like u201CWILD CARDS" are not allowed for this info object.
I am trying to find the search item like this: TELENOR*
When I click on find button it is giving error.
Please any body help me in this matter.
Thanks & Regards
Prathap.

Hi,
You need to create a selections option variable on the characteristic that needs to be filtered.
After doing this, when you run the query, select the * from the dropdown box,and give the value.
Hope this helps u..!!
-Pradnya

Field VBUND does not allow changes to the document ?

If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
I can't change trading partner.
Thanks!!
Message was edited by: Rico Wang

Rico,
Using trn code SM30, modify table V_TBAER and insert the entry
BSEG-VBUND for account type S, D, K, A
and see the effect.
Thanks
Mohit
ps: you may want to check OSS notes as well.

My iPhone has the correct Apple ID for everything BUT iCloud. How do I change that. Going through Settings shows the incorrect ID but it does not allow change.

My iPhone has the correct Apple ID for everything BUT iCloud. How do I change that. Going through Settings shows the incorrect ID but it does not allow change.

Settings > iCloud > delete account
You want to keep all content on your iPhone
Resign back in

The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

That is not normal behaviour, for possible causes see [[Firefox has just updated tab shows each time you start Firefox]].

I have ios7 on my iphfone 4 I now have a iphone5 with ios8 I cannot access the cloud to download my contacts and apps. the error is both phones need to be ios8, my iphone4 will not allow changing to ios8. can anyone help. Thanks

i have ios7 on my iphone 4 I now have a iphone5 with ios8 I cannot access the cloud to download my contacts and apps. the error is both phones need to be ios8, my iphone4 will not allow changing to ios8. can anyone help. Thanks

Contact Apple and speak to someone in account security.

Do not allow change of Reference Object after Order release

Similar Messages

Maybe you are looking for