Do we need license to connect SharePoint with SAP?

Hi folks,
I got a requirement to display data in SharePoint page from SAP database, we have installed SharePoint Foundation, do we need to purchase any license to connect with ERP tool?
Thanks
Maran

BCS allows you to view data in a database from within SharePoint.
http://zimmergren.net/technical/sharepoint-2013-business-connectivity-services-bcs-improvements-introduction

Similar Messages

Using Connect:Direct with SAP

Folks,
Client is using Connect:Direct to transfer the files from one location to another location.There are two table maintained namely T9AOA and T9AOB with Interface id and Unix scripting w.r.t Processing types respectively.
1.I don't think these are SAP standard tables then why they are not named starting with Z or Y
2.How to use Connect:Direct with SAP.
Searched in SDN and google but didn't get any clear information on the above.From google I came to know this is a Product of Sterling Commerce(AT&T).
Hope someone here who used Connect:Direct with SAP can share the info.
Thanks,
Kiran.

Paky,
The existing Design,had some tables which were maintained with required Unix Scripts.In the program we are just fetching that script from the table and building a Unix Command to move the files.There is also a URL using which we can check the status of the files.As I was just using the already existing design,don't have much info on how C:D connectivity can be designed from scratch.
By Googling,I was able to get some info.May be it will give you some lead.
https://www.google.co.in/?gws_rd=cr&ei=F5apUsrYCYWNrQf1y4GoDQ#q=connect+direct+in+unix
K.Kiran.

What's the best way to connect Cognos with SAP 4.6c on iseries V5R4

We have SAP 4.6c on iseries V5r4.
What's the best way to connect Cognos with SAP so that data could be extracted from SAP and create reports with Cognos.
Thanks
Joe

DB2 Connect version 8.2 is no longer supported by IBM (support ended April 30, 2009, see http://www.ibm.com/software/data/support/lifecycle/). As far as I know, DB2 Connect is communicating through DRDA, which is a platform-independent protocol supported by all DB2 platforms, so any DB2 Connect client should be able to talk to any DB2 database. However, there may be limitations on the supported release combinations.
Kind regards,
Christian Bartels.
Edited by: Christian Bartels on Sep 6, 2010 4:17 AM

Need details on Outlook integration with SAP CRM

Need details on Outlook integration with SAP CRM

As Robert has stated there is plenty of information if you would have done a search first or looked at the CRM wiki.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/crm/home
Please review the rules of engagement before posting further.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Due to this thread, being way too vague and a duplicate question, I'm now locking it.
Thank you,
Stephen
CRM Forum Moderator

User license query while integrating with SAP HR system

One of our clients wants to develop web based employee self service applications (web enabled modules) on their existing SAP HR suite.
Currently they are on SAP HR , ECC 5.0
Would they need to buy extra licenses for integration with the existing system or can the existing licenses be used concurrently?
I am not sure where to look for this piece of information. In case this question is inappropriate to this forum my apologies for the same.
Best Regards
Yuvaraj

Yuvaraj,
The best thing would be for your client to contact their SAP account representative and check how many and what type of users their existing licensing agreement with SAP includes.
Best Regards,
Alexandra

SAP Crystal Report 2013 SP03 - Connection error with SAP ECC tables, clusters

Hi,
I'm trying to connect SAP Crystal Report 2013 with SAP ECC but I'm getting below error. I've read some where that We need to install SAP integration kit but SAP BI 4.1 it comes default, also had to install the ABAP cystal report transport - How to do Install this on SAP side -
and on the ECC side we had to develop Crystal Authorization - how to develop this?
Can someone screenshot of these steps and please suggest if something else can be done.

Hi Pawan,
Search for the error and you should see many threads for this issue.
Anyway, this is what I found:
logon failed. you do not have the necessary rights to design reports
Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
The wiki should have answers to all your questions regarding Transports, Authorization et al.
-Abhilash

SAP XI connection path with SAP

Hi,
Anyone can elaborate about the path of SAP XI with SAP or any other Application S/w. How to configure with SAP SRM 7.0 (SUS).

Hello Sanjit,
This thread will be really helpful to you.please check
SRM XI scenario
Regards,
Amit Barnawal

How to connect sharepoint with salesforce Api

Hi,
I have SharePoint 3 installed in my organization.
also we work with Salesforce . I would like to connect the SharePoint to the salesforce API.
the SharePoint should go and bring back data from the salesforce and generated to graphical mode.
thanks in advance.

Questions involving the use of APIs are programming ones and go to the Programming forum.
Moving this there.
WSS FAQ sites: http://wssv2faq.mindsharp.com and http://wssv3faq.mindsharp.com
Total list of WSS 3.0 / MOSS 2007 Books (including foreign language) http://wssv3faq.mindsharp.com/Lists/v3%20WSS%20FAQ/V%20Books.aspx

Need Help on Connection pooling with asp

Hi,
I am need ur help on how i want set up the minimum and maximum connection for my asp programming.
I am using Oracle 9i database with driver "Oracle in orahome 9.02.00.54".
Ihave create the odbc to this driver for handle the connection pool.
How i want to set the minimum and maximum connection ?
This is my code:
Set cn = Server.CreateObject("ADODB.Connection")
cn. open "dsn=loadtest;uid=guardreg3;pwd=guardreg3;min pool size=15"
I hope you all can help me.
Thanks

James,
sometimes it makes sense to look at these things from a different (and broader) perspective.
Especially in a context of a corporation it makes sense to use a Single Sign On (SSO) server for authentication (usually against LDAP) . Something like Netegrity Siteminder, Oracle SSO Server (as part of Oracle Internet Application Server) or something similar.
Then you could have all your applications use the authentication method of the SSO server which will keep track of the valid session and the applications that participate in the SSO context.
On the Apex side you would have to write a custom authentication scheme to leverage that functionality, the session handling will no longer be of any concern to you.
Just a different way to look at it.
~Dietmar.

Best way to connect sharepoint with Microsoft Navision

We have one requirement to connect both Microsoft navision and share point .Can anyone please tell me which is the bast approach for the same.
Regards, Hari

Hello ,
You can use Dynamics Nav Sharepoint Client is best approach to connect to sharepoint .
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer" if a post solves your
problem or "Vote As Helpful" if it was useful.

My SLD is configured in SOLMAN sys, How can I connect it with SAP PI system

Dear Friends
My Basis has configured SLD in Solman, Now I cant use SXMB_IFR tcode in my PI that suggest me some error. saying "error in connection cant read secure connection config" or something like that. Plus SLDCHECK tcode is also not happy. it suggest that RFC connections are missing.
It is clear that My SLD is not linked with PI system. something is missing in technical system part and its not even bridged. but since I am not a BASIS guy I dont know How can I configure it. Not even my BASIS guy understands that I need to bring SOLMAN SLD to PI.
Can anyone suggests me How can I bring my SOLMAN SLD to PI system so I can run SXMB_IFR tcode ? I need to create some rfc connection like LCRSAPRFC and SAPSLDAPI but dont know the connection type like t, or something else. Please englight me by suggesting How can I bring my SOLMAN SLD to PI.
One intresting observation is when I try to run my SLD over url using PI system as host it comes but says SLD is not configured properly and when I did the same practice with SOLMAN host it works fine and I didnt receive any error.
Please reply me. your any help will be appreciated greatly.
Regards
Naeem

Hi,
Preferebly PI should have it's own SLD. And SOLMAN could use PI's SLD.
Please check Installation guide and SLD Administration Guide from Service Market place before finalizing SLD architecture in your System landscape.
I guess SOLMAN will have only one Instance in system landscape. (Not three system landscape like Dev, Qa, Prod).
If you want to go ahead with your current SLD plan, then Change your SLD hostname in Exchange Profile of PI, to SOLMAN Host name.
Regards
Praveen K
Edited by: Praveen Kurni on Jul 7, 2011 6:12 PM

Step-by-Step Guide for connecting CRM with SAP R/3 system Server

Hi Experts,
For my ongoing project , I am in the need of connecting the CRM server with
SD server.
Can u share any Step- By Step guide for doing that.
I know that the RFC connection has to be established between the system.
Logical system must be create and all such stuffs.
It is definitly helpful, If u can help me out.
I would to thank, appreciate and reward for your help
Best Regards,
Maniprabu

Hi Mani,
Follow the following steps :
1. Create RFC destination for both the systems on CRM and R/3 in SM59.
2. Create the logical systems and assign clients to logical system in SALE transaction both on CRM and R/3.
3. Create a user in the R/3 table CRMCONSUM with the name CRM.
4. Maintain the Middlware Parameter tables on CRM : Table SMOFPARSFA:
   Create an entry for following parameter entry:
   Key - R3A_COMMON
   Para name - CRM_DEFAULT_DESTINATION
   Value - R/3 logical system
5. Maintain the parameter tables on R/3 system : CRMRFCPAR, CRMPAROLTP
    CRMRFCPAR :
    Create new entry with following data:
    User - CRM
    Object name - *
    RFC Destination - RFC destination for CRM
    Load types - All Load Types
    In Queue flag - X
    Send XML No XML
    CRMPAROLTP :
    Create the following parameter entry:
    Para name - CRM_DEFAULT_DESTINATION
    User - CRM
    Value - Name of the CRM logical system
6. Create Sites and attach subscriptions in Admin Console : Tcode SMOEAC
    Create a Site as CRM and another as R/3. Attach the required subscriptions to the R/3 site.
7. Register the queues in SMQR and SMQS transactions.
PS : For detailed steps refer the Middlware Base Customizings(CR500 and CR100)
<b>Reward points if it helps.</b>

Oracle 10g Rel 2 - Proxy connection authentication with SAP User ID

Dear Experts,
We are currently doing some research and planning to upgrade SAP R/3 4.6C to ECC 6 and upgrading Oracle from version 9.2 to 10.2
In upgrading to Oracle vers. 10g Rel 2, we got advised that Oracle has apparently introduced a new proxy connection authentication, in which the SAP user ID is given limited privileges (create session only) ??
If you have any information on this or known any impact about this issue, please advise us.
Thanks in advance.

Thanks for your help, Kaushal.
I also found the SAP Note 834917 (Oracle Database 10g: New database role SAPCONN and it seems to be on a right direction to cope with that problem.
- For Oracle releases earlier than 10gR2, the CONNECT role includes extensive database authorizations and the more restrictive CONNECT as of 10gR2.
- To overcome this restriction, SAP need to find a way to compensate this, so does it come SAPCONN.
- SAPCONN is the new SAP-specific database role, which is defined to support the normal SAP applications operations (CONNECT, RESOURCE and SELECT_CATALOG_ROLE).
Once again, thanks.

User id type for connecting Universe with SAP BI

Hi All,
I am working on SAP BO XI 3.1 SP3 and I am successfully able to connect Bex query to the Universe.
While creating a connection within Universe, we have to provide SAP BI logon parameters like Application IP, user id, password, etc while connecting without SSO.
Currently I am using my SAP user id credentials.
But going forward in production environment we should have some dedicated ID for this connection as my id may expire in future.
So what is user id type that should be used in this case and what is the best practice in such scenario.
Would appreciate if someone could provide some reference link/doc as well.
Thanks
Ritesh

Hi,
for the connection creation you can use your SAP credentials, its valid only till you create and edit the connection.
for the user's as per my experience it's better to select "use single sign on while refreshing reports at view time" so when the user refresh the report his credentials will be passed for autherization.
Regards,
Ramu.

Sharepoint Integration with SAP and Logistic

Currently we have been integrating our .net server with SAP and all the project management and document management are stored in Sharepoint.. this is for a logistic company that we have been working with last 3 years.. we would like to make sure any data
points \integration points that should be considered with SAP during the integration
thanks -Pal

Hi,
As I understand, you want to integrate SharePoint with SAP.
SAP SharePoint integration enables frequent interaction with SAP processes, which means that systems are constantly being updated with newer, more relevant data. This timely interaction helps ensure the reliability of business information, and strategic
decision-makers can depend on “one version of the truth” regarding the performance and deployment of the company’s global workforce. There is three methods combining SAP and SharePoint: SAP BI Connector, Duet Enterprise for Microsoft SharePoint
and SAP, SAP Netweaver Gateway Productivity acceletor for Microsoft.
These articles below will help you.
http://www.winshuttle.com/solutions-sap/by-function-task/sap-sharepoint/
https://www.youtube.com/watch?v=aUmWrOR_B1M
http://stackoverflow.com/questions/11113381/how-to-integrate-sap-and-sharepoint-by-sap-pi
Best regards,
Sara Fan

Do we need license to connect SharePoint with SAP?

Similar Messages

Maybe you are looking for