Do / Will Lambdas work as arguments to RMI calls?

Hello Collegues,
the new Lambdas are a nice feature to enhance abstraction in Java.
Especially interesting are the areas of use for Lambdas that go beyong only using them in Streams.
One of these might be using Predicates as arguments to methods that query data from a repository,
as opposed to using fixed set of upper an lower bounds for comparision in finder calls e.g.
So it would be nice to give the predicate over RMI to a remote session bean method, as an example.
The problem is, however, this fails with an IllegalStateException, probably because the calling context of the Lambda is remote,
and thus cannot be bound to the executing context, even if no resources of the caller are used at all.
The Wildfly 8 Server creates the following stacktrace:
[java] (22.05.2014 12:04:47 MESZ) basisweb.global.BasisClientException: EJBCLIENT000025: No EJB receiver available
for handling [appName:BasisWebServer, moduleName:BasisWebEJB, distinctName:] combination for invocation context org.jbos
s.ejb.client.EJBClientInvocationContext@1d5a4a71
[java]
at basisweb.global.BasisClientException.createMappedException(BasisClientException.java:225)
[java]
at basisweb.muster.presenter.BlankoPresenter.doLambdaTest(BlankoPresenter.java:67)
[java]
at basisweb.muster.presenter.BlankoPresenter.reset(BlankoPresenter.java:50)
[java]
at basisweb.muster.presenter.BlankoPresenter.onZuruecksetzen(BlankoPresenter.java:170)
[java]
at basisweb.muster.gui.BlankoPanel.doActionPerformed(BlankoPanel.java:116)
[java]
at basisweb.global.gui.AbstractMainPanel.actionPerformed(AbstractMainPanel.java:151)
[java]
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2022)
[java]
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2346)
[java]
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:402)
[java]
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:259)
[java]
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:252)
[java]
at java.awt.Component.processMouseEvent(Component.java:6527)
[java]
at javax.swing.JComponent.processMouseEvent(JComponent.java:3321)
[java]
at java.awt.Component.processEvent(Component.java:6292)
[java]
at java.awt.Container.processEvent(Container.java:2234)
[java]
at java.awt.Component.dispatchEventImpl(Component.java:4883)
[java]
at java.awt.Container.dispatchEventImpl(Container.java:2292)
[java]
at java.awt.Component.dispatchEvent(Component.java:4705)
[java]
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4898)
[java]
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4533)
[java]
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4462)
[java]
at java.awt.Container.dispatchEventImpl(Container.java:2278)
[java]
at java.awt.Window.dispatchEventImpl(Window.java:2739)
[java]
at java.awt.Component.dispatchEvent(Component.java:4705)
[java]
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:746)
[java]
at java.awt.EventQueue.access$400(EventQueue.java:97)
[java]
at java.awt.EventQueue$3.run(EventQueue.java:697)
[java]
at java.awt.EventQueue$3.run(EventQueue.java:691)
[java]
at java.security.AccessController.doPrivileged(Native Method)
[java]
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:75)
[java]
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:86)
[java]
at java.awt.EventQueue$4.run(EventQueue.java:719)
[java]
at java.awt.EventQueue$4.run(EventQueue.java:717)
[java]
at java.security.AccessController.doPrivileged(Native Method)
[java]
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:75)
[java]
at java.awt.EventQueue.dispatchEvent(EventQueue.java:716)
[java]
at basisweb.global.gui.BasisEventQueue.dispatchEvent(BasisEventQueue.java:85)
[java]
at noname.BasisWaitCursorEventQueue.dispatchEvent(BasisWaitCursorEventQueue.java:70)
[java]
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:201)
[java]
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)
[java]
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105)
[java]
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
[java]
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
[java]
at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
[java] Caused by: java.lang.IllegalStateException: EJBCLIENT000025: No EJB receiver available for handling [appName
:BasisWebServer, moduleName:BasisWebEJB, distinctName:] combination for invocation context org.jboss.ejb.client.EJBClien
tInvocationContext@1d5a4a71
[java]
at org.jboss.ejb.client.EJBClientContext.requireEJBReceiver(EJBClientContext.java:749)
[java]
at org.jboss.ejb.client.ReceiverInterceptor.handleInvocation(ReceiverInterceptor.java:116)
[java]
at org.jboss.ejb.client.EJBClientInvocationContext.sendRequest(EJBClientInvocationContext.java:183)
[java]
at org.jboss.ejb.client.EJBClientInvocationContext.retryRequest(EJBClientInvocationContext.java:208)
[java]
at org.jboss.ejb.client.EJBInvocationHandler.sendRequestWithPossibleRetries(EJBInvocationHandler.java:25
6)
[java]
at org.jboss.ejb.client.EJBInvocationHandler.sendRequestWithPossibleRetries(EJBInvocationHandler.java:26
5)
[java]
at org.jboss.ejb.client.EJBInvocationHandler.doInvoke(EJBInvocationHandler.java:198)
[java]
at org.jboss.ejb.client.EJBInvocationHandler.doInvoke(EJBInvocationHandler.java:181)
[java]
at org.jboss.ejb.client.EJBInvocationHandler.invoke(EJBInvocationHandler.java:144)
[java]
at com.sun.proxy.$Proxy10.queryData(Unknown Source)
[java]
at basisweb.muster.presenter.BlankoPresenter.doLambdaTest(BlankoPresenter.java:59)
[java]
... 42 more
(the classes basisweb.* are from the application under test)
Is there any chance this will be fixed any time?
(Or does it work with other JEE7 servers? I could not check against glassfish, sorry)
Regards from Germany,
Thomas Nagel

Sorry, but the first time you open them in LV 6.1 your old VIs will get converted to the new format. The good news is that for the most part basic functionality has changed very little so there should be a minimum of compatability problems. Still you will need to test them--how big that job is depends to a large extent on how modular and reusable the V4 code is.
The biggest problem I have had in the past with this type of project is to supress the urge to "cleanup" old code by taking advantage of the advanced capabilities of later versions.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

TS1630 My iphone4 speakers will only work when I receive a call or factime, but for nothing else. Why?

My Speakers on my iphone4 will only work when I receive a call or facetime, and are muffled when an alarm goes off. Other than that, I have absolutely no sound from anything- text, music, videos, games, etc. UNLESS I use headphone. My phone will vibrate with text messages, though. When I try to turn up the volume on the side, it doesn't register any bars- the space for the volume boxes is blank. Also, there is no volume bar in my music when I try to turn up the volume. I have tried restarting my phone numerous times, I have also checked and rechecked the switch on the side to no avail. Does anyone have any troubleshooting ideas or know what might cause this?

I tried this and noticed a little green inside the charging port. I panicked thinking it was corrupt, but found out if you lighting moisten the toothbrush with alcohol and gently scrub (with the power off) you can remove the green. I started inspecting one of our charging adapters, which had been giving us trouble, and it was very green inside. Not sure if it can transfer from one to the other?
BUT now I have sound! Thanks for your suggestion, it helped!

I just switched iphones but my app store and my itunes will not work but i can make calls and texts

i just switched iphones but my app store and my itunes will not work but i can make calls and texts

Hi there. How were you able to solve it? I have a one year subscription to EW and I was able to receive a couple of issues. But now, I cannot download the new issue anymore. Please help.
Thanks.

Will 521 work on ATT with wifi calling?

I currently have the 520 using Consumer Cellular which limits voice minutes. It appears to me that a key difference between the 520 (ATT) and 521 (T-Mobile) is that the 521 has wifi calling. So my question is: Is there a way to use a 521's wifi calling on a non T-Mobile provider?
Thank you,
Pete
Solved!
Go to Solution.

the 520 has:
WCDMA network: 850 MHz, 900 MHz, 1900 MHz, 2100 MHz.
.WCDMA max data speed DL: HSDPA - 21.1 Mbps .
.WCDMA max data speed UL: HSUPA - 5.76 Mbps .
.GSM network: 850 MHz, 900 MHz, 1800 MHz, 1900 MHz.
.GSM max data speed DL: EGPRS 236.8 kbps .
.GSM max data speed UL: EGPRS 236.8 kbps .
the 521 has:
WCDMA network: 850 MHz, 1900 MHz, 1700 - 2100 MHz.
.WCDMA max data speed DL: HSDPA - 21.1 Mbps .
.WCDMA max data speed UL: HSUPA - 5.76 Mbps .
.GSM network: 850 MHz, 900 MHz, 1800 MHz, 1900 MHz.
.GSM max data speed DL: EGPRS 236.8 kbps .
.GSM max data speed UL: EGPRS 236.8 kbps .
in order for you to be able to use it on the ATT network, you would have to unlock the device.
that could cost you almost as much as the device is, unless you can get the unlock from Tmobile.
then, while the device will get general 2/2.5G service for phone and text, your data, being that it is missing the 1900mhz, will not get sufficient data.
the real difference between them is the wifi calling and the 1700/1900, which is what really separates the two device and why they are made specifically for each carrier.
being the cost of the devices, I would just buy another one for the ATT. wifi calling is not going to work anyhow, as that is a tmobile product that connects to your account on wifi, which att doesn't have.

HT201436 My iPhone 4 ringer will not work when I get a call or text etc and its not on mute what can info ?

Ringer not working and also what does"Locked Sim" mean its on my other iPhone front screen

Hello,
I understand that you have two separate questions. To address your first, regarding your ringer:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
You also inquired about a prompt regarding the Sim card being Locked:
iOS: Understanding the SIM PIN
http://support.apple.com/kb/HT1316
Thanks,
Matt M.

Android Smarttalk app will not work

The Android Smarttalk just will not work. It connects the call for 10-20 seconds, duriing which time incoming speech can be heard but outgoing is comepletely silent, then simply disconnects the call and reports 'Call ended' - not 'Call failed' or somesuch.
In comparison, Skype works perfectly! This is not a network connectivity issue, especialy as this is happening within two feet of the HH5.
This is a major blow as one of my resaons for switching to BT Infnity was this app. Any help much appreciated.

this is a customer help customer forum - your posts do not go to BT
have yo move the smarttalk app to the sd card as that can cause problems - needs to be left on phone
I think you will find that any cancellation period ceased as soon as your line was activated. there are numerous posts on the forum about cooling off period
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

RMI Call not working

the application we are developing first reads from a com port and then sends the message read to a rmi server.the server has to communicate with a client.the basic rmi calls were working initially.once the code for a listener for the port was added,the remote method cannot be invoked.what we're actually doing is this-in the listener,we invoke an instance of the server and then the server makes the rmi call.at this point,it gets stuck without any errors.we find that client has been registered with the server,there's no problem with that.we're completely at see as to where the error lies and dont know the right approach to solve the problem.any help will be most welcome.

Perhaps you should start here:
http://www.angelfire.com/dc/shish/answers.html

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Apple DVI to Video Adapter on PC???? WILL IT WORK?

Will the Apple DVI to Video Adapter work on PC's as well as Apple? I own a mac but the computer I need to convert on is an older PC with a DVI port on back. Will it work? It's just an adaptor right? It cn't be built to ONLY work on mac...theres no software in that little thing.
HELP!!! before I buy

No, it won't work with a PC. It requires the video card support the adapter, and since it was made for Apple cards, chances are the PC one won't. You might be lucky, but I doubt it.

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

Flash will not let me downgrade to version 10 because it says it is not the most up to date, but the 11 will not work on my computer

I had Adobe FLASH 11 but it did not play any videos, so I was prompted to download the version before it (10.) but it will not let me download it since it is not the latest/most current version of the program. How do I get a version that will actually work?

You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

I was using Lightroom v5.6 when a notice came up to update to v5.7. I did the down load but must have gotten a bad down load because it will not install. And the old 5.6 on my desktop will not work. So no 5.6 or 5.7 . any ideas how to get something

I was using Lightroom v5.6 when a notice came up to update to v5.7. So I did the download but it would not work or install. And the 5.6 version will not work now either. So I am screwed - no 5.6 or 5.7 and no access to Adobe Tech. Any help will be appreciated.

My iPod is a click wheel...I think that's fifth generation?
I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
I'll try using the USB again. It's laying around here somewhere. Just gotta find it.

My phone will randomly disconnect from the wifi and when I retype the password it says it is wrong. It will eventually work but I have to wait for a message to pop up on my screen to allow me to retype the wifi password.

When I first got my phone it worked perfectly fine with the wifi. Although later on I began to have problems connecting it. It will randomly disconnect from the wifi and when I try to retype the password it tells me it is wrong, although it is right. It will eventually work but in its own time, a message will pop up and allow me to type in the password and it will work. But sometimes it takes an hour or more and sometime it takes 10 minutes. I've seen where other people have had this problem but I don't know how to fix it. I'm not sure if it's an issue with my phone or if it's with my wifi. Does anyone know how to fix this?

Does this happen with all Wi-Fi hotspots? A specific one?
Have you tried forgetting the Wi-Fi connection and then reconnecting to it?
What about power cycling the Wi-Fi router?

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?
Like others, I have recently upgraded my MacBook Pro to the next generation and migrated all my information from old to new. Everything works seamlessly EXCEPT Acrobat. Photoshop, Indesign, Bridge and Lightroom all seem functional. Acrobat hangs with an error message "Suite Product Activation Needed. Acrobat was installed as part of a suite. To enable Acrobat, please start another element of the suite (such as Photoshop)." Needless to say, starting another element of the suite has NO impact on Acrobat.
This has to be a common problem. Now that Apple has made it really easy to migrate information from old to new machines, it has to come up all the time. What surprises me greatly is that I can't find any coherent answer in these forums.
So how do I get Acrobat running again?

Hi Anubha,
I do not understand what you said below.
I am running Adobe Acrobat Pro Version 9.5.5. I do not remember whether it came with Photoshop or InDesign.
When I open Photoshop, it opens without my having to follow any instructions to activate the software. As a matter of fact, I cannot find my Photoshop serial number anywhere in the Photoshop program itself. I do know it from my profile at Adobe.com. Are you suggesting I deactivate Photoshop on the new computer and then reactivate it using my serial number? Will it reactivate?
When you say
"/Library/Application Support/Adobe" at the root level of the startup disk (not the Library folder inside a user's Home folder)
what do you mean? I do not have a startup disk. I have the original installation disk but that version of Photoshop has been updated a few times.
After staring at your instructions for a while, I realized that you might be talking about the Library/Application Support folders resident on my Macintosh HD, although why you called it a startup disk is unclear to me. IAC, I went into those folders and duly moved the three folders into a new folder I called “Acrob1” and restarted Adobe Acrobat 9 and got the following error message: “AMT Subsystem Failure The licensing subsystem has failed catastrophically. You must reinstall of call customer support.” with a small (6).
By undoing my actions I am back to the staus quo ante.
Now what?
Regards, Robert

Do / Will Lambdas work as arguments to RMI calls?

Similar Messages

Maybe you are looking for