Do you require device drivers (ie Gaili card drivers or ESD CAN bus drivers) just to build a LabVIEW application

I have be told a number of different things in regards to this.  Some say that you need the device drivers to build and some say you do not.  I think that there are no interaction with the device drivers to build the application, but if there are library files then all you need is the library files.  Any comments.
Thanks
Rob

robat wrote:
I have be told a number of different things in regards to this.  Some say that you need the device drivers to build and some say you do not.  I think that there are no interaction with the device drivers to build the application, but if there are library files then all you need is the library files.  Any comments.
Thanks
Rob
Well if the device driver consists of DLLs you won't be able to compile and therefore link and build the application without those DLLs being available on the computer you want to do the build.
But your question does by far not contain enough detailed information to give more specific advice.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

  • PLEASE POST WHAT DRIVERS/OS/SOUND CARDS ARE USEING SO CAN ALL GET THIS BACK IN VIST

    THOGUHT A TREAD BOUT HOW WE ALL GOT IT WORKIGN AGAIN AS THERE ISNT THREAD WIT HALL THE DIF WAYS TO DO IT LIKE DANS DRIVERS/DELL TRICKS AND SO ON..SO COME ON PEEPS PLEASE HELP TO ADD THIS ALL IN AS LOTS OF PEOPLE ARE GETTIN WAY DIF RESULTS,BUT FROM THE SAME DRIVERS/TRICKS SO MUST BE A REASON WHY ITS NOT THE SAME FOR ALL SO LETS ALL POST THE RIGHT STEP BY STEP WAY TO DO IT THAT U USED SO CAN ALL GET THE HELP AND INFO WE NEED WIT HOUT HOURS OF MESSING BOUT AND STILL NOT GETTIGN IT RIGHT..ALSO WHAT SPEAKERS/DECODERS OR WHAT EVER OTHER HARDWARE UR USEIGN TO GET TI GOING OK... THANKS PEOPLE PLEASE HELP TO GET THIS GOING YER GUNAN HELP US ALL OUT IN END...AND WAS SURPRISED THER WANT A THREAD BOUT THIS ALLREADY...
    AND CREATIVE U.K/EUROPE HAVE THESE BACK IN THE I/O MODULES THAT LET UA USE OPTICAL/COAX INPUT/OUTPUT IF ANY WANTS THEM THSI IS THE LINK:
    http://uk.europe.creative.com/shop/basket.asp acti=add&prod=773
    THANSK PEEPS HOPE UA HELP THIS THREAD GROW AS I COULDNT GET MINE WORKIGN AN NOW LOTS OF PEOPLE ARE HAVEIGN TROUBLE TO...

    ok man sorry just thats the important bits,so coem on ua must beable to tell that...why would be shouting about this init lol...
    instead of moaning bout how i wrote my thread can ua add ur details about which driver/OS/sound card and if u could get the DD/DTS tab working again an if sop which way did ua do it was it dans drivers for old audigy cards or the dell file swap or anyother way ua did it...please people this will help out a lot of people that believe creatives lies bout it not supportiong hardware in vista as seen a lot of screen shots of it running in vista (showing the system tab so can see its really vista not XP,and the sound console showing the DD/DTS tab in place like we want....
    coem on peeps no lot of ua on here have got it working an no its nto ur problem if have urs working but im guessign soem helped u to get it runnign so how bout doig nthe same ofr soem of the noobs (my self as well) wont take ua 0 mins to post how uadid it step by step but please please try to post it as spot on the same as ua did it ok or it wont work im sure as some of the posts on here have bits missing out of them so it wont work if ua try it but will mess ur drivers up instead and im betting that people are gettign sick big time of uninstallign their drivers tiem after time ok....pleas e try to help soem of us out if can ok...lets make this tread the main place to get ur card back up to full specks again as it should be like XP....
    and im not shouting when type like THIS OK JUST TRYING TO GET THE IMPORTANT BITS OVER...thought ua coudl see that im not shouting and cause were not in chat room didnt think would matter but if thats all got to say in here (an not bein funny cause dont wannaf all out with any please dotn post things like that ok ur not helpign any but just starting people moaning bout what ua posted ok) an like other guy said ur whole syste mis wrote l;ike that sop stop shoutign at me to ok LOL
    thankls guys and please try take out 5 mins of ur life to help rest of us out ok... P.S sorry bout spelling im really ill at mo and havent got time to check it all ok so dont maon bout that wont happen again ok if ua felt as bad as i do ua have bad spellign to let me tel lua that ok....

  • Zondervan NIV Study Bible installs to device--want it to card, don't know how-Tungsten E2

    I just had the Zondervan NIV Study Bible software transferred to me from a previous user who stated it isn't installed on any device.  They gave me all the package and everything and I proceeded to install it last night.  So this should be a legal transfer of the software under the usual EULA.  But it just had a brief getting started guide included.  I'm guessing that there might have been an actual user manual available for download from the website which isn't up any more--just a blank page comes up.
    This has software as well as several versions of the Bible including the NIV Study Bible itself which is in 4 modules that are pretty large 2-4m.  It mentioned that the Bible versions could be installed on the expansion card but didn't give any instructions how to do that.
    When I started I only had about 11 MB free on my TE2. I made the mistake I guess of checking just about everything to be installed.  And then there was a step which I noticed after I had clicked next (or that's when it registered in my tired brain) that I was to do the hot sync I think it was before clicking next.
    Anyway, it says the software requires 500 k free memory the other stuff can be loaded to a storage card or device RAM and rquire 21MB of free memory (this is on the package not the brief instructions).
    It gave me fatal errors, something about memory, probably because it was trying to install more than there was free memory in device RAM.  So I had to do a soft reset several times. 
    I did figure out how to transfer the earlier installed Bible versions to the card and then deleted them from the device.  Further hot syncs installed more stuff and then crashed again.
    The 4 modules of the NIV Study Bible now show up in the window where they can be delted but they do not show up in the window to copy them to the card.  I just checked again.
    Also the device itself is only showing 168k of 29.7 M and I'm afraid that this isn't enough to do all that I need to do with some other previously installed large business applications which are very interactive, allowing me to take a product application on the palm, hot sync it and then update from our co website to upload and download data.
    So any suggestions on how to get the large applications off the device and onto the card?  Also I can't find where the stuff installed to my computer and I don't see this listed under hot sync options.
    I mean maybe there is a way I could wipe it all off (but I'm a bit afraid that it might not reinstall since it does have an install key) and start over just doing part at a time, maybe just doing the NIV study Bible by itself first which is the biggest and moving it but the 4 modules are 3090,2676,2484,2918k respectively.
    So any suggestions would be appreciated.  I also checked Zondervan website and they don't show any Palm applications so apparently this software isn't supported any more. I think I saw a date of 2004.  But the previous user said she had used it on a TE.
    Palm v 4.5.2P
    WinXP sp2 with updates
    Thanks for any help you can give!
    Post relates to: Tungsten E2
    Message Edited by KathiMR on 12-06-2008 02:09 PM
    Message Edited by KathiMR on 12-07-2008 02:24 PM
    This question was solved.
    View Solution.

    Thank you.
    I also had tried other means of getting answers and got an even more specific answer on just how to do this.  Below is the link to the actual knowledgebase article giving specific instructions since there are some files that need to be on the Palm and some on the card, etc.
    http://support.laridian.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=380&ratingconfirm=...
    I emailed Zondervan to see if they might be able to direct me to a downloadable manual.  The referred me to laridan.com who now supports their software.
    I followed the instructions, taking into account some things that were already where they needed to be, hot synced it and it seems to be working fine with 7.8 M free space on my Palm which I trust is enough for my other very large applications.
    Thanks for your help!
    Post relates to: Tungsten E2

  • Mixed message lengths on CAN Bus using USB-8473 Device

    I am attempting to use the Frame API functions for LabVIEW
    and send both 11-bit and 29-bit headers over a bus that uses both address lengths.  I am currently successfully sending 11-bit
    packets but the 29-bit packets are having their addressing truncated to the 11-bit
    length when put on the bus.   
    As far as I can see I should have to set the standard
    comparator to 0xCFFFFFFFF and then send messages.  I am using a NI USB-8473 CAN Device for doing
    this.  Is there anything else I need to
    change for extended addressing?

    You need to OR your Extended ID with the 0x20000000 before giving it to the NCwriteNet.vi.
    This is the way that the underlying CAN driver and hardware know that is it an extended ID you are trying to send.
    The ID on the CAN bus will NOT have the ORed ID but only your ID. The driver/hardware filter the 0x20000000 from the ID.
    This is the same for reading an extended ID on the CAN bus. 
    Before using the ArbitrationId, you need to AND the ArbitrationId with 0x1FFFFFFF to filter the extended flag out. 

  • My order have a status: "Payment action required: We are unable to obtain an authorization for the credit card you provided. Please contact your card issuing bank. Please update your payment method to continue with this order". But i paid from AmEx.

    My order have a status: "Payment action required: We are unable to obtain an authorization for the credit card you provided. Please contact your card issuing bank. Please update your payment method to continue with this order". But i paid from AmEx. And my money blocked when i see it in internet banking.

    Have yuo contacted AmEx? From what you describe it seems like AmEx is blocking the charge.
    You can contact iTunes if you want by:
    Contact iTunes

  • Buying Songs off iTunes with gift card but says verification and billing info is required? I thought you did not need to enter card details once gift card has been redeemed

    Trouble with buying songs using gift card

    How was the account created ? Unless the instructions on this page are followed when creating an account : http://support.apple.com/kb/HT2534
    then credit card details will need to be entered before the account can be used to download any item from the store.
    You could see if this post by mountaingoatgirl lets you review your account without needing to enter credit card details : https://discussions.apple.com/message/24303054
    If not then you will have to enter credit card details - you should be able to remove the card after entering it

  • Error 0xc00000f required device is inaccessible. Windows 7 wont complete reinstall

    I have an HP Pavillion dv7 Notebook with AMD Turion dual core proccesor and 500GB 5400rpm SATA hard drive; I was using it and let the battery deplete and at 7% it went into its power saving mode, so I just left it and a couple hours later plugged in the batter and turned it back on and I got a BSOD and then this error came up on a black screen.
    "wINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE CAUSE"
    Status : 0xc000000f
    Info: The boot selection failed because a required device is inaccessible.
    since then I have done all I can think to do, I am somewhat savvy with computers but get lost on some of the lingo. Heres what I have done
    I have a windows upgrade disk to Windows 7 home premium 64 bit (which is what I had on the computer) I have run the startup repair, failed. I have opened the command prompt and completed all the bootrec.exe steps. I have tried to reinstall windows 7 completely from both a usb drive and the upgrade disk (when I use the usb it tells me no drivers were found so I don't get very far at all) I got to the part with the partitions and deleted both the primary and recovery (had 100mb storage) and then I hit next and it stays at Copying Windows Files 0% until I get an error (cant recall the exact error) hit ok and try again and still same thing. When I go into bios (which people say to see if it detects the hard drive, my bios has no option for that, it has a Hard Disk Self Test that fails every time and also a memory test that passes. But thats it. At the top it says InsydeH20 Setup Utility.
    So now I do not know what else to do. 
    Is my hard drive shot? Did it get overheated and now is broken, I can't even reinstall windows.... 

    Hi
    As you did mention the Hard drive test has failed you need to replace the Hard drive then reinstall the operating system back on the unit. Only then the unit will work fine Please call HP Technical support check for the Warranty of the unit and get the part replaced.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Need to update Mac Pro drivers without graphics card.....

    I have a 1.1 Mac Pro. The ATI Radeon 2600 graphics card that came with it is completely broken. I am trying to replace it with a ATI Radeon HD5770 which should be compatible, however as I have never really updated my OS (unfortunately I cant remember which OS it has on it at the moment, it's the one that came with it) I don't think I have the neccessary drivers. Any ideas of how I can update the drivers without haveing to buy another graphics card? If it's any help I also have a Macbook Pro. Thanks in advance.

    5770 cards require one 6-pin Aux power cable from the motherboard to the card. Aftermarket cards do not always include it, but it MUST be connected.
    That is a PC-BIOS card flashed with Apple Firmware. In general, such cards do NOT show the Boot Screens or any diagnostic screens. The first screen you see will be the login screen, or if you auto-login, the desktop.
    The seller says It will show the Boot Screens ONLY if you connect an Analog VGA display (with adapter) to the lower DVI-I port.
    Drivers for accelerated operation of this card are included with custom 10.6.4 shipped with certain Mac Pros, and in standard 10.6.5 and later. All appropriate Drivers are already included in Mac OS X -- there is no need to install them later, and no way to do so since they will not work in older versions.
    Official information lists the Mac OS X that shipped originally with your Mac Pro 1,1 as 10.4.7, but it may have been as late as 10.5. These are not likely to work with that card. You would probably need to purchase a 10.6 DVD from the Apple online store, about US$30.
    Most Users who are not developers would be better served with a genuine Apple card, which would show a picture from power-on. But it costs close to US$250.

  • How do you get around needing a credit card for setting up family sharing?

    How do you get around needing a credit card for setting up family sharing?

    khuerter wrote:
    I appreciate the replies about needing to setup a credit card for agreeing to pay for purchases and letting someone else be the Family Organizer.  The purpose of my question is to know if there is a way around apples requirement to have a valid payment method on file...we have money in our apple account (use iTunes gift cards) and I do not want to store my CC info at apple.  It seems like very odd that money in your account would not be enough to setup Family Sharing.
    Very frustrating and just about ready to get rid of all the 15 apple products we currently have.
    Khuerter,
    Having a credit card when you set up as Family Organizer is a legal requirement to prove that you are taking financial responsibility for the others on the account.  As Gail noted, there is not a way around that.
    Once the account is set up, the Family Organizer can remove the credit card and replace it by a debit card.

  • Windows failed to start. Required device inaccessible.

    Windows failed to start. A recent hardware or software change could be the cause. The boot selection failed because a required device is inaccessible . Both hard disk and memory test passed. Please let me know what can be done. I think it's battery issue because it says battery problem but even if I remove the battery it's not going to windows home screen. Also tried I'm safe mode, did not work.

    Hi @San16,
    Welcome to the HP Forums!
    It is a great  place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that when you start your notebook you are seeing " The boot selection failed because a required device is inaccessible"
    Here is a link to  HP Notebook PCs - Resolve Boot Device Not Found Error Message (Windows 8, 7).  As you have already tested the hard drive and memory you can omit that step.
    If a recovery should be required, you will have an opportunity to backup your personal files to prevent data loss during that process. The link for the recovery process is in the document provided.
    Here is a link to HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7) should it be needed.
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Can you run a non supported Video card on the boot camp side ?

    My dilemma: I'm using a mac Pro for work plus a PC for gaming, and I'd like to get rid of the extra PC. The stock card on my Mac pro (7300?) is not good enough for gaming, but fine for everyday stuff... I'd like to know if I could install my better card (from the PC, 512MB pci express Nvidia) in the Mac pro...
    Of course it is not supported on the mac, so I was wondering if it could be installed a a second card and "ignored" on the mac side, but if could be used on the PC side of my Mac (boot camp), with existing drivers, for better gaming performance. And make that card the primary on the PC side... Sound hard to do though... Has anyone done this before?

    itll be a 50/50 shot as its an issue between efi vs bios. and unsure if you have both cards in there it will guarantee that windows will pick up the second card when booted.
    but there have been users who have swapped in PCI-E Windows cards for use when specifically for using Bootcamp. so its a possibility thatit will work.
    im just not 100% sure if it will be recognized right off the bat when booting it if you still have the stock mac video card in.
    but if it does work just goto the Manufactures site for drivers to install for Windows.
    let me know how that works, asid like to know personally myself.

  • HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

    How do you solve an issue with the card? I don't get the option of 'none'

    I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
    I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
    #1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
    #2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
    #3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
    #4 Click on App Store (upper center of screen).
    #5 Scroll down the screen page until you see Top Free Apps on the right side.
    #6 Choose any one of the FREE apps.
    #7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
    Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
    Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
    #8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
    What a pain in the keester, eh?

  • How to use PCI-CAN LS (low speed can bus card) with hi speed devices

    I'm having problems connecting the low speed card to the hi speed devices: I've setup the bus with 120 ohms resistors terminating it. The devices seem to be working fine but the can card doesn´t seem to receive or send anything. It has rth and rtl of 510ohms. The card and devices are at 125kbps. I ran the card diagnostics and it passed them. Is it really possible to use this low speed card with a hi speed bus? Don't I have to do something special for it to work on hi speed bus? Any sugestion is highly appreciated! thank you

    Hello Danut,
    I was able to set up a Low Speed CAN card to talk to a High speed port on another computer( simulating a high speed device). I did not have any termination resistors on the cable. Initially, I saw the same Comm errors you mentioned and this was because the cable I was using was internally terminated. So please check that the cables are not terminated. Also , verify that the high speed device itself is not terminated ( measure the resistance between CAN_H and CAN_L, with the cable connected and without the cable).
    Let me know if you were able to get the system up and running. Also do you have any low speed devices that can be used to test teh CAN card with?

  • Why is it that I can't do a continuous streaming to disk with a 5102 scope card (PCI) when I can do it with a DAQ Card of much lower specs (my requirement is for small sampling rates only)?

    I am told that the 5102 Card (PCI) does not support continuous streaming of data to the hard disk. My application requires only very low sampling rates. If I can do it with a low spec DAQ Card using LabView why can't I do it with this card?

    Hello,
    The PCI-5102 is a high-speed digitizer card that has a slightly different architecture than the DAQ cards and was not built with the ability to stream data to the PC. However if you are sampling at low rates you can still acquire up to 16 million samples, which is done by using dma to tranfer data from the onboard memory on the 5102 to the PC memory. However, you will not be able to save the data to disk until the acquisition is complete.
    Another option would be to purchase either a DAQ card or a PCI-5112. Both boards can continuously stream data to the host PC and you should not run into any PCI bus limitations if you are stream to disk at relativiely slower rates.

  • Windows 7 won't boot (required device is inaccessib​le)

    I accidentally interrupted a "back-up to a previous date" and now can't get Window 7 64 bit to boot. Tried recovery dvd but no go.
    Please help!
    Screen displaying ---
    Info: The boot selection failed because a required device is inaccessible
    Status: 0xc000000f

    A Major problem I've occurred in the past was just getting Windows (XP/ME/98), etc.  to go back onto the drive after a former operating system was in place. I've solved the problem in the past by using the manufacturer's diskette or CD (you can download
    it from their websites and burn it to a CD/disc/disk/flashdrive).  Western Digital (which uses Data Lifeguard Diagnostics in DOWNLOADS/Seagate and others which has diagnostic software free from their site) and has a "bootable" solution
    set of files within that when booted to LOW-LEVEL format (that is, buring "0"'s and "1"'s to the drive, hence erasing everything down to the core level, whereas it's destructive to even remove hidden and boot-level info back to the condition when the drive
    was first created, pristine state).
    After it low-level formats, one can either high-level (format) it, or run Windows on CD, etc. to install Windows back.  The premise was that one can place a specific operating system on the former condition drive and by installing a different one (ex.
    32bit to 54 bit, or in 98, etc, difference operation layers which tend to cause changes/upgrades going forward to fail.
    This has worked for me on numerous occasions and I was able to put any Windows (provided it's supported by the BIOS or operating system met the system requirements (RAM, etc).
    Always good to know.

Maybe you are looking for