Dock mode?  HELP

My phone keeps going into Dock Mode.  I have disabled car mode, pulled out the battery, tried to clean out the plug for the charger.  It makes all my calls go to speaker phone, closes apps and texts when I am in the middle of using them and just makes my phone pretty much unusable.  And now it randomly keeps shutting all sound off, but says its in normal mode so I miss tons of calls. 
I have only the the phone for 4 months and I'm ready to throw it out the window.  Any help? 

    Hi megmza,  Let's get your phone back to normal!  Can you clarify your current software version? Menu>Settings>About Phone>Software information.  Do you typically use a car charger?  If so, was this a charger purchased from Verizon Wireless?  I am eager to troubleshoot and get this resolved!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Similar Messages

  • My iphone 4s is permanently stuck in dock mode when it is not connected to a dock, and it will not play music. How do I fix this? Every time I have this problem I have to get it replaced

    My iPhone 4s has been replaced at least 4 times within a year and nobody at the genius bar seems to know what's wrong but every time I plugy phone into my cable that connects my iPhone to the stero in my car and when I disconnect it,  my iPhone think its in dock mode and will not play music or sounds with our being plugged into a dock. However it will occasionally make sounds when a text comes in but that's about it. I really don't know why this happens or how to fix it, HELP!!

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Rebuild screen freeze - unable to update firmware as not docking. Help please

    Hello, I've got an 8gb Zen.
    Always worked fine til I tried one of those hand crank chargers, since then I turn it on and it will freeze on the rebuilding screen.
    Ran scandisk on it - no joy.
    Wanted to try and update firmware to see if that helped but it will not connect to computer via USB. It will charge from the usb but just not connected, nothing.
    Any help appreciated. Thank you

    QRe: Rebuild screen freeze - unable to update firmware as not docking. Help please? So, it freezes on the rebuilding screen after formatting? It is very odd. Just to make sure... you have formatted (not cleaned up) the device from the Recovery Mode menu, right?
    My only suggestion now is trying to mount the device on another computer (try one with a BSD or Linux operating system) and format it from here. With some luck, you should be able to see it as a new USB dri've. I am suggesting one of these operating systems, as you have a chance to mount your player on them even if it does not boots up properly. (I did it to recover mine just before suspecting there was a discrepancy on the FATs stored of the filesystem.) In your case, you will have a chance to format the device (using a FAT filesystem, of course) from these operating systems. I am, however, surprised to see that the Recovery Mode format function does not do its work on your player.
    If your device does not boot up and freezes on the scanning/rebuilding processes there is a chance you have a problem with your filesystem instead of a fried USB port. So, there is a chance you can fix this device yourself yet.

  • My iPhone is stuck on dock mode

    A few days ago, my iPhone 4 had no sounds (lock/unlock, messages, reminders, keypad, etc) except when someone calls.  When playing music, the volume bar below disappears as if connected to the dock.  It sometimes works fine, and then it goes to dock mode again by itself.
    I've tried re setting it, cleaned the dock in my phone, etc. Nothing works!
    It charges fine, and exchanges data with iTunes as well. When I connect it to my Bose speakers, it's not on dock mode anymore, but when I unplug it from the Bose speakers, it goes back to dock mode.
    Can anyone help me with this please?!

    Hi All,
    I had this Sound / Speaker issue too on my iPhone 4S, with only Ringtone & Headphones working and no other sound coming despite several software hacks and solutions read on forums here. I managed to solve it today after reading online for a perfect solution.
    This seems to be a fairly frequent problem amongst users who are using 3rd party (Cheap Chinese) dock connectors or chargers. There is some residue on the charging connector and hence it seems to be stuck in Dock/Headphone mode. I personally had this issue that only Ringtone and Headphone were working. I cleared some stuck particles from the dock connector in iPhone below and voila ! Sound works perfectly. Try it using a cotton bud / swab with removed cotton or I did it with inverted metal paper clip carefully avoiding to scrap and destroy the PCB board. (Other common solution was to remove water particles from headphone hole but I didnt have any)
    All the best,
    Cheers !

  • IPad stuck in docking mode

    Hi community, hi all,
    i have a problem with my iPad (first ... sry for my bad english ... i'm not a native speaker).
    Following issue:
    My iPad stuck in Docking Mode. Means i get no access to volume keys or to volume bar in the multi tasking section. The volume bar there is empty. So my iPad doesnt play any sound ...
    But when i plug in earphones or when i connect my iPad to a bluetooth speaker sound is playing. And when i plug in the iPad into the docking station and pull it off (plug out... doesnt know the word).... then sound comes out of the build in speakers for about 1-2 seconds ... afterwards iPad return into docking mode and sound is away.
    What i have done ....
    ... i rebooted
    ... i hard reseted it
    ... i do a factory reset
    Nothing work... but it seems to me like a software failure... dont know.
    Next issue is that i have no warranty left for exchange at an apple store...
    Any ideas from you?
    Thanks for any response.
    best regards

    I had resolved this issue by myself.
    I thought long time about it... and then i got following idea.
    I thought ... mybe there is something in the connector which think ipad is already plugged into a docking station.
    This helps me....
    my idea was .... another product with another behavior to the iPad. So i take my iPad Camera Connection Kit... i stuck it into the connector leave it for several minutes ... and removed it.
    My iPad turned back in normal mode ... All god. My internal speaker works again. Wuhuuuuu ... Maybe this solution would help somebody.
    br
    f2107

  • Dock mode

    I have had my Rhyme for about a week now and I accidentally changed it out of Dock mode.  Verizon support was not able to help me switch it back.  Anyone know how to get this thing back in Dock mode?

        I would be happy to see what we need to do to get the Rhyme out of dock mode.
    Switching to Dock Mode
    Dock Mode turns HTC Rhyme into a desk clock, photo slideshow viewer, or
    music player. You can also set it as a speakerphone when you receive calls
    while HTC Rhyme is docked.
    1. With the dock plugged in, place HTC Rhyme into the dock.
    HTC Rhyme automatically turns on Bluetooth and switches to Dock
    Mode.
    2. If prompted, choose how you want to use the dock for audio.
    To exit Dock Mode, tap the circle with the x in it or remove HTC Rhyme from the dock.
    Once that is done what happens? Did it go back to dock mode when plugged back in to the dock station?
    Tamara H.
    Follow us on Twitter @VZWSupport

  • ECL Viewer Dock mode

    Hello,
    We are using ECL viewer to view scanned invoces that are stored in SAP Content Server.
    We are able to view the stored image in a NEW window however when we change the settings to view the scanned image  
    in dock mode it gives an error as follows
    A dialogue window appers with message " Cannot create Temp File" when we click "OK" another dialogue window with message " Unable to open document" when you click OK we can see a message in the status bar as follows
    File http://10.18.10.80:1090/contentServer/ContentServe contains errors and cannot be displayed
    Workstation application in network settings in transaction DC30
    Workstation application : TIF
    Data carr type: R3
    Application Type : 1
    Path with prog. name: c:\windows\sap\gibfx %f
    Path for ref. file : blank
    Can anybody tell me what is wrong in the settings when using dock mode?
    regards,
    Sudhakar
    Edited by: FUJITSU Support on Oct 18, 2010 2:11 AM

    Hello Pradeep,
    Thanks for your reply. I tired what you said but it did not work.
    i'm giving you some more config details it might help you help me.
    Define Content Repository Settings OAC0
    Content Rep : Z1
    Description : Invoice Management
    Document Area: ArchiveLink
    Storage Type : HTTP Content Server
    HTTP Server: 10.18.10.80
    Port: XXXX
    HTTP Script: ContentServer/ContentServer.dll
    Basic Path: /usr/sap/DEV/SYS/global/
    Phys. Basic Path: /usr/sap/DEV/SYS/global/
    Archive Path: blank
    Phys. Archive Path: /usr/sap/DEV/SYS/global/
    Document Types
    ZICS_TIF : ICS Incoming Invoice u2013 TIF u2013 Active
    Transaction :OAG4 Archive Link Settings for Hit List, Display and Storage
    Default Hit List Selection: Display Docs Directly
    Windows Viewer Settings : Include ECL Control and Use HTML Control
    Viewer Settings WEBGUI: Use HTML Control
    Deactivate Generic Object services in Viewer u2013 unchecked
    Doc Display as Dialog Box : Unchecked
    Deactivate Data Provider cache: Unchecked
    Transaction DC20
    Define data carrier type u201Carchiveu201D
    This has one entry as follows not sure how it came here in the first place
    AR  -   Archive Files -    checked
    Do we need to define a new data carrier type?
    And then define archives?
    Define data carrier type vault. Is this required ?
    Define data carrier type server front end. Is this required?
    It is set as
    Z1 - Frontend -- Path = c:\temp\
    Transaction DC30
    Select TIF and click Define work station application
    Workstation application : TIF
    Data carr. Type : Z1
    Application Type : 1
    Path with Prog name : EAIWeb.webviewer2D.1 %SAP-CONTROL%
    Path for ref. file : blank
    I'm able to view the image in a New window why only the dock mode is not working?
    regards,
    Sudhakar
    Edited by: FUJITSU Support on Oct 20, 2010 2:58 AM

  • PowerPC G5 iMac only booting up in Safe-mode - Help!

    In July of 2005, I purchased my PowerPC G5 20" iMac, 2.0GHz, +260 GB harddrive and 2 GB of DDR SDRAM. It has been running so great that I even upgraded to Leopard OS 10.5.6 in June of 2011.
    However in Nov. 2011, the computer would freeze upon start-up, and I would have to hold the power button to shut it down. After waiting a minute I would start it up and the OS came up ok. But each week I had to shut it down and restart a few times before it booted up ok. I ran the OS Disk Utility to repair permissions and it did not seem to make a difference. I also ran MacTuneUp 3.6.0 (purchased it in 2010), and there was also no difference.
    Now I can ONLY boot into Safe-mode - Help!!!

    Discovered something new!
    I left my iPhone connected to the iMac, and when starting up the computer the iPhone started charging. When the screen froze (light blue shade, not black screen), the iPhone stopped charging. (no charge?).
    BTW....my mouse always moves when in frozen state.
    I also tried starting up (c-key) using OS 10.5.6 CD and computer also froze in light-blue screen. The computer tried to access the CD but then gave up. After leaving the computer for awhile the screen power saving mode was on (screen was black). When I moved the mouse the screen changed from black to light-blue screen. Boot CD did not work. No keyboard commands work. Only holding the power button will shut down the computer.
    Help!!

  • I accidentally removed iphoto from dock, please help?

    I accidentally removed iphoto from dock, please help?
    iPhoto isn't in my applications to I can't drag it to dock.  All images and movies are still on Mac (heart did stop as I thought I'd lost everything and nearly cried) but I don't know how to get iPhoto back.  I'm worried about trying different things as don't want to lose anything on Mac.  Noticed that I haven't been using Time Machine and bought a couple of years ago so not sure what operating with.  I have our 2 CDs from when we bought the Mac - 13-inch Macbook Pro (Mac OS X Install DVD) and 13 inch MacBook Pro (Applications Install DVD).  My photos are not backed up so not sure if I need to do this first - can I back up to iCLoud or do I need newer software?
    Any help would be greatly appreciated - need lots of step by step instructions though!

    All images and movies are still on Mac
    Of course they are.  Deleting an app doesn't delete the files that's in it.

  • Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

  • Vision M stays in docked mode. How do I "undock"

    Hi. Just purchased my Vision M yesterday. When I connect it to my Media Center PC, the PC recognizes the Vision and it immediately goes into "docked" mode. At that point I can sync it with media center, use the vision explorer, etc. My question is... The manual says not to disconnect it while in "docked" mode, but even once I've exited windows media player, mediasource, vision media explorer, it stays in "docked" mode. I ended up disconnecting it anyway and it just said "updating" briefly and then appears to funtion normally. I'm just afraid of damaging the Vision by disconnecting it while it says "docked". Is there a way to "undock" it before disconnecting it's
    Thanks!!!
    Kevin

    I just got mine too. I think the "docked" mode refers to when you are transferring data and not when it is doing nothing. The symbol in the middle only moves when it's transfering data. I hope so, because I keep taking mine out of the dock without any adverse effects !! .

  • Mountain Lion won't allow me to save photos from Mail directly to iPhoto (as you could in all other recent OSX).  Tried opening iPhoto and then click/drag each photo onto iPhoto icon on dock (as Help instructed) but the photo will not drag.  Suggestions?

    Mountain Lion won't allow me to save photos from Mail directly to iPhoto (as you could in all other recent OSX).  Tried opening iPhoto and then click/drag each photo onto iPhoto icon on dock (as Help instructed) but the photo will not drag.  Suggestions?

    I have real a lot of posts that say to click Command+Option while opening iPhoto and this will open the Photo Library Repair window, but... this is not happening.
    Be sure you're holding the correct keys and that you're holding them long enough. Depress them before clicking on iPhoto and don't let go until the menu shows up.
    If you don't want to lose those photos, make a back up now. Hopefully it's not too late.

  • IPhone 4S 6.1.3 stuck in dock mode

    As the title says, it's stuck in dock mode so there's no volume bar.
    Reboot and restore and trying to clean the phone does nothing.
    The only way I can get out is by plugging it in and out of a dock.
    So that confirms that it's a software issue, thanks Apple.
    I think I've been having this issue since I hit iOS6 months back.
    However, I don't have dock nearby because it's packed up during
    the move. Is there any other fix before my phone meets my fist?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Hi im having problems with my internet and email ive reset the network even with my wifi on ive also turned off and on airplane mode help please thank you

    hi im having problems with my internet and email Ive reset the network even with my WiFi on Ive also turned off and on airplane mode help please thank you

    hi Ive reset my network toggled the airplane on and off and turned off my carrier off then turned my phone off and turned my carrier back on but still problem persists

  • Dock mode while using magnetic charging

    I've noticed that whenever I connect my phoine to a magnetic dock, my phone sorts of changes mode. I.E im using the app Themer, and whenever I connect my phone Themer restarts. It can get especially irritating at times, espeically when it interrupts what im doing, such as gaming. 
    Is there an option anywhere to turn off the magnetic charging dock mode? I've looked everywhere but nobody else seem to be mentioning the issue or providing any solutions for it.
    Solved!
    Go to Solution.

    I'm afraid it's not possible to disable this behaviour. It's up to the app in this case to handle the change in device configuration: http://developer.android.com/guide/topics/resources/runtime-changes.html
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for

  • Closing Stock = Opening + Purchases - Sales

    Hi, I want the closing stock account in assets stock to maintain the reflections from purchases and sales........just like customers reconciliation to accounts rec, i need this account to  mmaintain purchases and sales value, so that i can get the ac

  • Changing Connection String dynamically at runtime

    I am using the Crystal Report Viewer control in in a Visuall Studio 2008 C# project.  The reports are created inside of Visual Studio 2008, and will be running against an InterSystems Cache database.  I have to use an ODBC (RDO) connection and use a

  • JPEG format can't be read!

    Hello all... I'm suddenly having a problem seeing JPEGs of my photos on my iBook. I downloaded these photos off of my Kodak Easy Share camera, and was able to edit them in iPhoto and view them in Preview for ages. Because I didn't want to use my memo

  • LOV based on Query - ORDER BY :P_ITEMVALUE does not work

    Hello guys! I have a special request that I'm focussing on. I have a couple of select lists in my application that contain tree species. On the first page the user has the opportunity to assign a ranking to the respective tree species. The database c

  • Set field business area to display in order master

    Hi Does anybody know how to switch the business area field to display in the master of a production order ? We o not want to use business area's anymore and want users to be unable to fill the field by hand using transaction CO01. Thanks in advance