Docking Control at SAPScript or Smartforms Preview Screen

Hi Expert,
    How to implelment the Docking Contorl at SAPScript or Smartforms Preview Screen.
    As we know, When SAPScript or Smartforms Preview is a full screen to display. my requriment is Split the screen to add own functional on the letf, like Docking Contorl eg. Navigation Tree.
    i already have a cut screen, but i don't know how to implement it.
    Thanks!

Hi All,
Docking Control need including in all PBO, can any object can handle standard screen event?

Similar Messages

Change purchasing output control (from sapscript to smartform) Qusetion!

I want to print a Purchasing Documents by smartform.So i look for system standard program "SAPFM06P"->FORM ENTRY_NEU.
In this form i found 2 function:'ME_READ_PO_FOR_PRINTING' and 'ME_PRINT_PO'. who can tell me the useful of function?(is it standard print function to sapscript?)
thanks

Hi
These are the Std function modules that are used in print programs
'ME_READ_PO_FOR_PRINTING'
will fetch the data from different PO related tables that is required for the script/smartform printing
and 'ME_PRINT_PO' the fun module will print the PO printing.
go to the respective fun modules source code and can find the more logic and documentation for them
<b>Reward points for useful Answers</b>
Regards
Anji

Differnce between SapScript And Smartform

hi All,
Can anyone tell me the difference between sapscript and smartforms.Which we have to use
Points rewarded for answer
Harpreet

Hi harpreet,
1. Can anyone tell me the difference between sapscript and smartforms
some practical differences are :
<b>*----
One main difference which is
visibility in the report is TABLES
(in sapscript we cannot design MATRIX like tables,
having grid lines,
but in smartforms, it is much possible to
design tables, having grid lines, color just
like excel table)</b>
a) sapscript requires
    - driver program (se38 program)
    - layout (se71 layout)
   smartforms just require
   smartform,
(and a program is just required for
   selection screen purpose)
b) the logic of printing (ie. sequence, flow)
    is CONTROLLED BY drier program,
   in case of sapscript.
where as in smartform, it is inbuilt using TABLES element.
c) In sapscript we cannot write our own logic for printing.
   where as in smartform,
we can write our own logic for pritning.
(we can even write SELECT Statements, DATA statements,
   and many program lines + logic to suit our requirements)
2 Which we have to use
If we are copying some standard sapscript,
then we have to go for sapscript only.
We can use both. but practically smartforms is easier to
develop.
regards,
amit m.

Sapscript or Smartforms

Hello,
I am developing an object for transaction QM01.
How can I know if a particular transaction supports SAPSCRIPT OR SMARTFORM ? What is the method to find it ?
Tushar.

I suggest you start with transaction SPRO. It is complex, but will give you the information you need.
In this case, do the following:
1) Run transaction SPRO
2) Press button "SAP Reference IMG"
3) navigate list as follows
SAP Customizing Implementation Guide
-> Quality Management
--> Quality Notifications
---> Notification Processing
> Print Control
> Define Shop Papers, Forms, Print Programs
4) This screen will show you if SAPscript or Smart Forms are used and which programs are used to drive them.
The details will vary by R/3 implementation, but this is where to look.
In general, exploring SPRO will get you to the code and forms underlying any printed document.

Re: How to reduce the width of Docking Control Container

Hi All,
I created a text editor control using docking container. Its width is occupying the entire screen. I want to reduce it to half of the screen. I tried changing the values of ratio, extension and used the methods set_width to change it, but was not successful. Please let me know how can i reduce the width. Below is the code which i am using.
data: editor TYPE REF TO cl_gui_textedit,
lo_dock TYPE REF TO cl_gui_docking_container.
IF lo_dock IS INITIAL.
CREATE OBJECT lo_dock
EXPORTING
repid = sy-cprog
dynnr = sy-dynnr
ratio = 75
extension = 50
metric = cl_gui_docking_container=>metric_mm
side = cl_gui_docking_container=>dock_at_bottom
name = 'DOCK_CONT'.
IF sy-subrc 0.
MESSAGE 'Error in the Docking control' TYPE 'S'.
ENDIF.
CREATE OBJECT editor
EXPORTING
parent = lo_dock
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5
OTHERS = 6.
CALL METHOD editor->set_text_as_r3table
EXPORTING
table = i_texttable
EXCEPTIONS
error_dp = 1
error_dp_create = 2
OTHERS = 3.

Hi,
Check the other exporting parameter of cl_gui_textedit's constructor.
Try using MAX_NUMBER_CHARS, WORDWRAP_MODE. Pass these paramters while creating object editor.
Regards,
Sharin.

How can I control an iPad from a touch screen which is mirroring the iPad screen

How can I control an iPad from a touch screen which is mirroring the iPad screen.
This is a very important application for disability students who wish to use iPad apps but do not have sufficient fine motor skills to use the small screen of an iPad but could use a large format display touch screen.
There must be a way.?????????? Help!!
Peter Niass
[email protected]

Have a look here
http://www.macstories.net/iphone/the-external-touchscreen-that-can-control-an-ip hone/

How to get the image in docking control in a report using doc management

HI All
My question is that is that i am storing one image using documents in jha2n.
Now I want to get that image in report using Document management.
Pls guide how to proceed as I am new and dont know anything about document management.
Thanks
Pooja

Hi,
Please kindly refer to the online help link below:
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/973035624811d1949000a0c92f024a/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/973035624811d1949000a0c92f024a/frameset.htm]
And for handling the DMS document, you may check the BAPIs in SAP Note: 504692
Function group: CVBAPI
BAPI_DOCUMENT_GETDETAIL2
BAPI_DOCUMENT_CREATE2
BAPI_DOCUMENT_CHANGE2
BAPI_DOCUMENT_DELETE
For display image in the docking control, pleae kindly refer to the SAP DEMO: RSDEMO_DOCKING_CONTROL
Cheers,

My Classic IPod had been working perfectly with Windows Vista OS and on a dock. I left it unattended for 10 days, recharged it and tried to play music on the dock. All that shows on the screen is the Apple Logo and I am unable to restart or update the IPo

My Classic IPod had been working perfectly with Windows Vista OS and on a dock. I left it unattended for 10 days, recharged it and tried to play music on the dock. All that shows on the screen is the Apple Logo and I am unable to restart or update the IPod. Any ideas???

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Screen error while adding table control to existing tab in BP screen

Hi experts,
Requirement: Add new section with table control in existing tab in BP screen. Purpose of creating table control is to add or delete multiple entries etc.
To fill this requirement, we have created custom transaction with table control facility. When we run this transaction from SAP easy screen, we are able to add, delete and create multiple records to database.
We have configured this custom program and screen in BDT (views) and saved.
When we call BP transaction we are getting following error message.
"Screen ZMOD_TEST1 0100 must be an Include screen (screen error)".
We are not sure, the approach we have chosen is correct. Incase, any one of you come across this type of problem, please guide us to rectify.
Thanks in advance.
Venky

Venky,
If you are on CRM 4.0 or even 5.0, my approach to adding a table to business partner attributes would have been the following:
- Use EEWB to generate the table extension
- Modify the generated code/screens if what was generated did not meet you complete requirements
However going back to your original question, if you add new screens for the BDT, then they must be "subscreens". The screens you create for the BDT tool are always subscreens placed in a container by the BDT program.
So your options are one:
1. Convert your screen to a subscreen and if you have coded all the BDT event function modules correctly it should work
2. Use EEWB to generate a new extension and make adjustments as necessary.
Good luck,
Stephen

Video not showing up in preview screen on iMovie & Photobooth not working

Its like all of a sudden a bunch of video programs on my Mac have stopped going.
I am running OSX Lion 10.7.3
I have recently installed Elgato Video Capture and have been recording old VHS tapes and editing in iMovie. Was having no problems at first. Then the picture in the preview screen disappeared, the sound was still going, then that went too. I am wondering if Elgato video capture has something to do with it..
When I go to old videos, they play fine.
I also noticed the camera wont load in photobooth anymore.
If anyone has any information on this or knows how to fix it, that would be great! Thanks

Had same problem on iPad. Go to settings. Look under privacy. Make sure you turn on iMovie under the photos heading. Might also need to enable location services for iMovie. Now I can see camera roll from iMovie.

How do I create custom field in MDM shopping cart preview screen (srm-mdm)

Hi
Am on SRM 5.0 MDM 2.0.
Requirement is 'temp labor'. i have a price form a specific supplier for a specific service is $80 in SRM_MDM internal catalog.
But i talked to supplier and they have agreed on a new price of $75. After I select this catalog item, and view the shopping cart preview screen i see "Price information and total price". I want to add a custom field to the shopping cart preview screen called "new price" to enter $75 as the new price and click recalculate to recalculate the new total price and send this to SRM for follow on functions...
is there standard functionality in SRM7 for this requirement?
cheers
alex
Edited by: Alex Waiyaki on Jul 23, 2010 10:04 PM
Edited by: Alex Waiyaki on Jul 24, 2010 2:51 AM

I have resolved the issue
thanks
alex

Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?

Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen. Additionally, only a single, blank page prints for a multi-page pdf document. Any ideas?

Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen. Additionally, only a single, blank page prints for a multi-page pdf document. Any ideas?

Figured it out. It had nothing to do with the software levels of Safari or Adobe Acrobat. Here's the fix:
Open Finder/Applications
Search "Internet Plug-Ins"
Move any Adobe plug-ins to the trash
Quit Safari
Launch Safari
Your pdf document should now render in Print Preview and print properly.

How do i create a custom field in SRM_MDM shopping cart preview screen

Hi
I on SRM 5.0 MDM 2.0.
Requirement is 'temp labor'. i have a price form a speciific supplier for specific service is $80 in SRM_MDM catalog.
But i talked to supplier and they have agreed on a new price of $75. After I select this catalog item, and view the shopping cart preview screen i see "Price information and total price". I want to add a custom field to the shopping cart preview screen called "new price" to enter $75 as the new price and click recalculate to recalulate the new total price and send this to SRM for follow on functions...
is there standard functionality in SRM7 for this requirement?
cheers
alex

Hi Alex.
I totally agree with Sudhanshu's comments. If you create a custom specific field it will always be a read-only. you can also use EForm for such usecases. Also in case of SRM-MDM Scenario, the price information field holds a standard behaviour which can't be manipulate for custom specific fields.
But if you want to achive this through the exisitng repository schema and the BADI. then you can follow the steps given below:
1. If you want to hold the value for the new price, you can create a new custom field (New Price)of type "Text" in the repository and store the price information in that field.
2. In the configuration screen, you can add the "New Price" to all the views(Result Set, Shopping Cart Preview etc).
3. In the "Shopping Cart Preview", now you can view the existing standard price information column and the newly created "New Price" column. Now you can change the quantity based on your need. Now when you click "Recalculate" button the standard price column will change and not the "New Price" column.
4. Now you can map this newly created field to any of the custom fields which were provided by default. (like NEW_ITEM-CUSTFIELD1).
5. You can make use of the BADI BBP_CATALOG_TRANSFER to perform the remaining calculations.
6. The BADI will hold all the catalog related data in its OCI structure. Before transferring the data to shopping cart you can modify it by multiplying the quantity with the "New Price" value and send the updated price in the OCI standard structure "NEW_ITEM_PRICE".
Now SRM shopping cart will hold the updated "New Price" for the item shopped through catalog.
Let me know in case you need more information.
Regards
Bala

Chinese char issue in smartform preview as pdf format

Hi chinese guy!!
please help me with chinese char in smartform preview as pdf format
i created smartform with chinese char and then when executing this smartform by t-code smartforms, it show as simplified chinese char, but when getting JOB_OUTPUT_INFO in order to convert OTF as pdf format, although smartforms performed as pdf format, only chinese char were broken. smartform with english or korean language does not have any issue, only chinese issue now.
i got into r/3 as logon ZH by SAP GUI english version and i used adobe acrobat reader chinese simplifed version. r/3 version is ecc60 unicode system***
please help me,, any chinese guy there?
1. CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
2.    CONTORL_PARAMETERS-NO_DIALOG = 'X'.
       CONTORL_PARAMETERS-GETOTF = 'X'.
       OUTPUT_OPTIONS-TDNOPREV = 'X'.
       CLEAR JOB_OUTPUT_INFO.
3.
CALL FUNCTION FUNCTION
    EXPORTING
      CONTROL_PARAMETERS = CONTORL_PARAMETERS
      OUTPUT_OPTIONS     = OUTPUT_OPTIONS
    IMPORTING
      JOB_OUTPUT_INFO    = JOB_OUTPUT_INFO
    TABLES
      ITEM               = ITEM
    EXCEPTIONS
      FORMATTING_ERROR   = 1
      INTERNAL_ERROR     = 2
      SEND_ERROR         = 3
      USER_CANCELED      = 4.
OTF_TAB[] = JOB_OUTPUT_INFO-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      FORMAT                = 'PDF'
    IMPORTING
      BIN_FILESIZE          = PDF_FSIZE
    TABLES
      OTF                   = OTF_TAB
      LINES                 = PDF_TABLE
    EXCEPTIONS
      ERR_MAX_LINEWIDTH     = 1
      ERR_FORMAT            = 2
      ERR_CONV_NOT_POSSIBLE = 3
      OTHERS                = 4.

hi,
please see the notes 999712.
thanks

Docking Control at SAPScript or Smartforms Preview Screen

Similar Messages

Maybe you are looking for