Document change via workflow log.......

Dear all
In our scenario, I am creating a word document in workflow.After creation its going to first level approver for his decision.consider he is not executed the doc.
When I check the status of document from the workflow log(from :Work item executed by me), its allowing me to change the doc.If I made any changes its updating the document,which is already waiting for decision.......Is this correct?Is there any possibilities to restict the document changes from the workflowlog view?
Not only for Word doc.......other doc also.........

I feel you can restrict this by putting some authorization. May be there is something you can restrict in the HOLD Document option.
Thanks
Arghadip

Similar Messages

Recording Differences in Long Text Changes via Table Logging and AUT10

Hello,
I am trying to record changes to Long Text generated in a DMS DIR. (This field is the Language Dependent Description field.) We have set the system profile param rec/client.    We have enabled table logging for STXH & STXL in SE11. When we make a change to the Long Text, we try to display the results in AUT10. A change is indicated but when displayed, the text seems identical.
When displaying Logging status in RSTBHIST, the Active box for STXL is not checked despite the fact that we have set the "Log changes" box in SE11.
Note #573291 talks about installing a PH-ELR add-on. Is that necessary if we are already running SAP_APPL 6.04?
Also, is Table Logging the best approach to capture these changes to Long Text? Is there any way we could use Change Docs"?
The field width of DBTABLOG-LOGDATA = 16000 if that matters.
Thanks for any responses.
Edited by: John K Ryan on Oct 13, 2011 9:20 AM

Tobias,
"You created a dynpro based transaction which allows you to change
the content of a text. The text to change is not part of the dynpro
screen, but you want to set it into an ITS field where you can access
it using Bussiness HTML. Is this correct?"
<b><u>This is correct.</u></b>
Below is the portion of HTML template code in which I'm defining the web screen pushbuttons, providing the pushbutton names, and linking same to the function codes defined in the R/3 transaction.
This is my first experience with ITS, so if I've missed something glaringly obvious, I apologize in advance.
Thanks!
<table>
<tr>
    <input type=submit name="~OKCode=ANAL" value="Analysis Long Text">
</tr>
<tr>
    <input type=submit name="~OKCode=ROOT" value="Root Cause Long Text">
</tr>
<tr>
    <input type=submit name="~OKCode=RMCA" value="Remedial Corrective Action Plan Long Text">
</tr>
<tr>
    <input type=submit name="~OKCode=CRAP" value="Corrective Action Plan Long Text">
</tr>
<tr>
    <input type=submit name="~OKCode=PRAP" value="Preventative Action Plan Long Text">
</tr>
<tr>
    <input type=submit name="~OKCode=COMM" value="Comments">
</tr>
</table>

Changing a Parked Document via workflow

Hi again
Before we did the upgrade from 4.7 to ECC6.0, on 4.7 approvers were able to make changes to parked documents via their inbox i.e. they would be able to go to change wrong data or add missing account assignments. However after the ECC6.0 upgrade when approvers access documents via their inbox they can only display the documents with only the option to release or reject and without the option to change.
Could this be a result of changes between 4.7 and ECC6.0 and if so what can we do to allow for approvers to be able to change parked documents via their inbox.

I found SAP Note 670910 explaining that this was actually a program error which allowed approvers to changed parked documents via workflow.

Material bapi custom field change to be logged in change document

Hello all,
I have just added a custom field to MARA table (materials), and updated it successfully via BAPI_MATERIAL_SAVEDATA.
I would like now to log changes via change documents but problem : after having changed value from "A" to "B" for example, I don't see the changes (to do this, I call function CHANGEDOCUMENT_READ with parameter OBJECTCLASS = "MATERIAL" and get results from returned EDITPOS parameter).
What is surprising me is that I can see changes of other standard and custom fields (this was done by other people in my company 2 years before but I don't have any trace what they did).
Do you have any idea what customizing need to be changed or what else need to be done, to log changes of new custom fields into change documents?
Thanks a lot.
sandra

In this transaction, there is nothing related to fields; there are only objects (like MATERIAL) and tables (like MARA).
I can't see anything which makes the difference between our 2 custom fields MARA-ZZCOLLANA (which is logged in change documents) and MARA-ZZSSCOLL (which is not logged in change documents).
For info, my SAP version is R/3 46C.

Cannot view workflow log via Services for Object Workflow Overview

We recently had an upgrade of R3/ECC and discovered a new issue. For some reason we can no longer view workflow log via Services for Object > Workflow Overview for Material Master (transaction MM03). We get the message "There are no workflows that have already worked with this object". However, we have confirmed via SWEL and other t-codes that the workflow and log do exist. This seems to be the only object we have this issue for after the upgrade.
Anyone know what issue is and how to fix?   Or at least path to config in SPRO for "generic object services" where we can see if anything changed via upgrade for this object?
Thanks,
Matt
Edited by: Matthew Huth on Apr 22, 2008 9:23 PM

Found the solution. See OSS note 553246. This has been tested and works for us.   -Matt
Note 553246
Summary
Symptom
In the material master, the system no longer displays the attachments for the material or workflow items in the Generic Object Services.
Other terms
MM01, MM02, MM03
Reason and Prerequisites
As of Release 4.6B, business object BUS1001006 is valid for the material master. Until you have implemented Note 452424, the Generic Object Services is still published for the old BUS1001 business object. After implementing the note, all attachments, relationships, notes and workflow items that are assigned to business object BUS1001 are no longer displayed.
Instead, all new attachments are assigned to business object BUS1001006. As a result, attachments cannot exist for both systems.
For workflow items, the assignment to the business object occurs in the respective tasks. It may be very time consuming to convert the business object, depending on whether an individual subtype (assigned to BUS1001) is created.
In other words, after you implement the note, the workflow items for business object BUS1001 can no longer be displayed in the material master.
Solution
With the following correction you can call the Generic Object Services for both business objects. When it is called, the system displays a dialog box in which you can choose the required business object, that is, BUS1001 ('Material') or BUS1001006 ('Standard material').
This correction is delivered as a modification supported by SAP only. This is because the additional option means that attachments can be maintained as required in either of the business objects and users may therefore require extra training.
However, the corrections enable you to display attachments and workflow items for both business objects without the need for a major conversion; this means that you do not get the impression that these have been lost.
Alternatively, as of Release 4.70 (or Basis 6.20) you can, without making a modification, implement method ADD_OBJECTS of BAdI GOS_MULT_PUBLISH for filter attribute WF_OVERVIEW ('Workflow overview'), SRELATIONS ('Relationships') and VIEW_ATTA ('Attachment list'). The implementation should be similar to the following:
METHOD if_ex_gos_mult_publish~add_objects .
DATA:
    ls_lporb TYPE sibflporb.
READ TABLE ct_lporb INTO ls_lporb INDEX 1.
if ls_lporb-typeid = 'BUS1001006'.
    ls_lporb-typeid = 'BUS1001'.
    append ls_lporb to ct_lporb.
endif.
endmethod.

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

FPE2 doc changes are not saved when C4EYE is reset via workflow

Hello All,
I'm utilizing event # 5504 in FQEvents (in FICA) to start a workflow.
When a user sets a payment method in FPE2, I set the C4EYE and then explicitly create a custom event which starts my approval workflow. On saving the document changes, I get a message "document changes noted" (instead of the usual "document changed" message).
The changes made in FPE2 are only seen as a 'planned change' button in FPE2 (on the 'change item' screen) with the old and new values and the change number associated with it. Also, the check reason has been applied. Incidentally, all of the above (except ofcourse the event and start start of workflow ) happens if I all I do is merely set the check reason (C4EYE) in event 5504.
Meanwhile, the workflow does its thing, determines agents and gets the approval and on approval, it calls FKK_C4EYE_RESET passing the document # and change # to reset the Check reason. Despite the workflow completing successfully and resetting the check reason, my newly added changes (such as the payment method etc) are blank - meaning any changes made in FPE2 have been lost. I don't have the 'planned change' button either.
Incidentally, to eliminate any problems with the custom-event-workflow logic, I also turned off the event and the workflow - just left the logic to set the C4EYE check reason to '01' in the 5504 fqevent in case a payment method is set. I set the payment method in FPE2 and 'saved' the change which set the check reason.
I then ran FM FKK_DOCUMENT_CHANGE_FROM_ID passing the doc #, change number (from CDHDR) and user name. All it did was to reset the check reason but did not set the payment method (or any other changes) back.
How can I apply the FPE2 changes (including addition of the payment method) back once my approval workflow resets the check reason?

Folks, Sorry to have bothered you. The document change had multiple change numbers for each of the changes and I was apparently passing the incorrect CDHDR change number to the FM "FKK_DOCUMENT_CHANGE_FROM_ID" which caused it to not reset the changes. Now, I'm able to see the payment method and any other changes restored back once the C4EYE is reset.
Thanks for your time!!

Did the user open the document before approving it? How to log this in workflow logs?

Hi there,
My workflow on Document Library needs to keep logs of:
- When a user is assigned the document for approval/rejection, did he actually open it or download it before approving?
How to get this information please in workflow logs please? (I know this information exists in SharePoint Audit logs but that does not work for me - I need this in workflow logs).
Thanks.

If you are looking for event logs for Document open/edit you can use "Audit Logs". For more information check these links:
http://social.technet.microsoft.com/Forums/en-US/3217c715-3ba7-4925-a18e-d7b01ceee71b/-is-it-possible-to-set-alert-on-open-document-event?forum=sharepointadminprevious
http://sharepoint.stackexchange.com/questions/9315/view-document-event-for-document-library
***If my post is answer for your query please mark as answer***
***If my answer is helpful please vote***

Standard Workflow(Approve Document Change) in Error.

Hi Experts,
I have activated a standard workflow from IMG. It is a workflow for approval of Document change (WS21000093). I have assigned the agent as being the workflow initiator. After workflow is triggered, I've executed the work item (approve doc ) from my SAP inbox and it always goes into an error (Read last error).
Can anyone suggest the cause of this error or how to debug this?
Thanks a lot in advance.
Regards,
TM

In the Workflow the Activity stepwhich is having the task TS2100021 in that Task method the below FM is not retruring SY-SUBRC as ZERO that's y it is going into that step check with the data that you are passing to the BOR method
FKK_DOCUMENT_CHANGE_FROM_ID

Log for document change details

Hi,
I am able to get the document change date in BKPF. But I am looking for detail log for document change. In which table i can get this.
Thanks

Hi,
check tables CDHDR and CDPOS, maybe you find what you are looking for.
BR Christian

Sales Order changes via change history (transaction logs)

Hi guys,
If I happen to change delivery date to a new date, as we see from the change history of the previous commit dates, I wish I could see the various date
changes from any table?
I did tried VBEP, CDHDR, CDPOS & program RVSCD100. But it says No records found, when I did change the dates in my SO (item level).
What is the table VBUK & VBUP for? I cannot retrieve from them too.
I just want to know if there is a way I could retireve the changes via the change history field in SO.
Rgds,
Ann

Hello Ann,
In the VBUK table and give the delivery doc number, The various status indicators for the table will be there by which you can get the delivery status.
Goods movement status could be got from VBUP table.
Overall delivery status of an item could be got from this table
The status for sales order are stored in VBUK header level status and VBUP for item level. U can check if the statuses are not C than the sales order is open. There are different status available in VBUK/P tables like delivery status/goods movement status/invoice status etc
<b>**reward if this helps**</b>
Regards
AK

Sending mail to a particular positon in org structure via workflow

hi all
i have a problem regarding sending mail to particular position in org structure on runtime execution via workflow so that i neednt hard court the particular position
to achieve this i am using expressions,first i have created a new container element and then i have used container operation like this:
(lead.employee responsible.business partner= container element defined by me)
when i first try to execute the workflow and test it ,in the container i am getting the value of the container element in which i have the position where i have to send the mail.but inspite of value getting populated ,when i am using that container element to send mail like:
expression: container element
the mail is not send,when i checked the log it is mentioned that " you are not the authorised person to stsart the workflow and start failed" but workflow is still triggered and i am able to pass the object but not able to send the mail.
please tell me is there any feasible way to achieve this,like rule or in my way how is it able to achieve
detailed possible solution will really be appreciated.on thing we are working on CRM 5.0 standalone system
full marks will be rewarded
best regards
ashish

Hi,
Follow this ,
Goto PFTC -> Choose "Workflow Template" from the drop down -> Enter the workflow template id "123********" in the text box -> now click on "change" button -> Now goto the menu addional data -> agent assignment -> maintain -> select the task text -> and set it as general task.
I guess you have done the same for the standard task TS*********** but failed to do it for the workflow template (WS123*************). Or have you done it already?
Also once you make this change "Refresh your buffers" once before checking it out.
Richard A

Granting item permissions to specific group or users via workflow- sharepoint online

I want to create a Document Set and upon doing that i want to grants users/ groups item level permissions to the document set.
Can this be done via workflow?
What are my options?

If workflow starts on document set, you will change permission on the document set: if the files inherit permission from document set, all children files will have the same document set permission.
the document set is nothing more than a souped-up folder
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it.

FI document park & Post Workflow WS10000051 Error.

Hi Guru's,
I am facing a issue with workflow WS10000051, when Approver REJECT the FI document from work item, then FI Document goes in change mode. Because of this the WF_INTIATOR is assigned with Approver name. So instead of workflow should go to original FI document creator person for change & correction, WF come again in Approver inbox for change FI document.
I checked the workflow log, Then found the WAIT for Rejection step having the error as per screen.
So i think if WAIT stage not completed, because of this FI Document opens in changes mode to Approvers work item. & Workflow processing changed from requester to Approver.
Please help me out.

Hi Guru's,
Following are the messages for WAIL step failure.
Temporary error in result processing of work item 000000403445
Message no. SWP030
Error when loading component: Work item 000000403442 locked
Message no. SWP034
Work item 000000403442 locked by user XXXX (enqueue error)
Message no. WL605
After few minutes new set of messages occurs
Temporary error in result processing of work item 000000403445
Message no. SWP030
Return message from work item 000000403445 within a closed component
Message no. SWP129
Please help help.

Requisition change order workflow - custom wf not being picked

Oracle Standard Requisition change order workflow doesnt meet the client requirement.
so we had to customize the poreqcha workflow.
Steps
1. Changed poreqcha.wft and complied using another name.
2. Associated the workflow in document types. ( Purchasing Super user>>setup>>purchasing>>document types)
Attached the new item-type to "Change Order Request Requisition"
3. Create a req approve it, auto create a PO and approve it. Now log in as requester and change the requisition
It still follows the standard workflow and not the custom workflow.
Please assist is there are any settings which i'm missing.

See "How to Change the Top-Level Process for the POREQCHA - Requestor Change Order Approval? [ID 423078.1]" for Oracle's opinion on this. We have modified the top-level process directly. Neither solution is ideal.
Thanks,
Nic

Document change via workflow log.......

Similar Messages

Maybe you are looking for