Document not reported for approval

I have an urgent issue related to workflow, it is like a lot of document that should report for approval, has not been reported since many days. Now when i am checking the log of the documents it is showing a SWW_WI_ERROR_MESSAGE_SEND_S in technical details of the agent list.
Can any one help me for the same?

> And this is the step in WF-Batch.
>
So it is a background step. That is (well, at least it can be) significant information. Have you checked that they haven't messed with the authorizations of WF-BATCH?
> Every document posed after 15 september by a user is having the same problem, workflow is not triggering. And in SM58 it is showing "time limit exceeded".
>
So the documents are of different types, it is not restricted to e.g. only purchase orders. Have you checked that the user has normal authorizations (e.g. the same basic roles as another user)?
I assume you have chekced most of the obvious things, such as the document referred in the workflow actually existing.
Surely the workflow must be triggering when this problem can be found in the workflow log. What exactly do you mean by that statement - do all the workflows fail early in the process - perhaps even before the first step is created?
What should the step that fails do? I assume the failure occurs in a customer-developed BOR object type, so please give a bit more information about where the problem occurs.

Similar Messages

  • POWL does not update Expense Reports for Approval

    Hi,
    I am about to replace the UWL with POWL and the configuration have been made successfully when it comes to leave approval and expense reports but the Expense reports for approval refuses to update itself (no items in the list)
    If I go to Transaction code SWI5 am I able to see all u201Cwork items to be processedu201D . From this list I can see three Task IDs
    TS12300097      Approval Process (1 work Item)
    TS31000007     CATS: Approval by Supervisor (1 work item)
    TS99300002     Approve travel expenses (2 work Items)
    In transaction POWL_COCKPIT in the maintain POWL Type details I have flagged the Sync. Call for FITV_POWL_TRIPSFORAPPROCAL_EXP. I have also assigned same Task ID as Approve travel expenses (TS99300002) to POWL in transaction SM31 table IBO_C_WF_TA_P_SC.
    Result is that the list is empty in the POWL but if I go to UWL Authorize list it shows 2 items which is correct.
    Please help me out here because I have searched a lot for a solution but havenu2019t found anything.

    Remember Employee list is the key! Did you maintain it?
    The employee list can also be maintained centrally in the R/3
    backend for all users (managers). Therefore please use the
    transactions FPB_MAINTAIN_PERS_M or FPB_MAINTAIN_PERS_S.
    With this the object list is done for the POWLs.
    If no emplyoee list exists for the manager, then there will be no items.
    POWL is based on personalization framework where every user has its own
    set of queiries and types, which are assigned using TX POWL_QUERYR or
    POWL_TYPER which is role based. Similarlaly POWL_QUERYU and POWL_TYPEU
    for user based.
    If you want to delete a query from all users, please delete a entry from
    POWL_TYPER or POWL_QUERYR.
    More information on POWL can be get from
    http://wiki.sdn.sap.com/wiki/display/WDABAP/POWL
    http://help.sap.com/saphelp_erp60/helpdata/EN/42/d6652b755c1630e10000000
    a1553f7/frameset.htm
    Once you delete the entry, please run the report POWL_d01.Please check
    the details of report before running it.

  • Document or report for assessment and reversed assessment?

    Hi guyz,
    Is there any document or report for assessment and reversed assessment?
    I need to find documentation as a proof for any execution and reversal of assessment, such as journal entry or report line items that is showing debit or credit for the expenses..
    Currently, I can only see actual cost document which shows execution of assessment and an assessment cost element debit and credit in the Cost Center Actual/Plan/Variance report.
    However, when I do reversal at KSU5, in the Cost Center A/P/V report is showing that assessment cost element is still exist (no more debit and credit showing as the result of the reversal), only that the value is now zero.
    Need your answer asap...Thanking you..

    Dear Meila,
    Use tcode KSB1 Cost Center Actual Line Itens, execute then report and change the Layout, insert the field Business Transaction in the report.
    Regards

  • Accounting document not generating for excise invoice.

    Dear all ,
    my issue is
    accounting document not generating for excise invoice
    we are creating accounting document in J1iin
    with refferance to billing document but the accounting docuemnt is not generating
    the accounting document for billing document is generated
    so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
    please help
    regards
    Subrat

    IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India ->  Account Determination -> Specify Excise Accounts per Excise Transaction
    Check if the following is maintained or not
    DLFC       CR Credit      PLAAED PLA AED account
    DLFC       CR Credit      PLAAT1 PLA AT1 Account
    DLFC       CR Credit      PLABED PLA BED account
    DLFC       CR Credit      PLACESS PLA cess account
    DLFC       CR Credit      PLAECS PLA ECS Account
    DLFC       CR Credit      PLASED PLA SED account
    DLFC       CR Credit      RG23AED RG 23 AED account
    DLFC       CR Credit      RG23AT1 RG 23 AT1 Account
    DLFC       CR Credit      RG23BED RG 23 BED account
    DLFC       CR Credit      RG23ECS RG 23 ECS Account
    DLFC       CR Credit      RG23SED RG 23 SED account
    DLFC       DR Debit       MSUSP CENVAT suspense account
    Also IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India ->  Account Determination -> Specify G/L Accounts per Excise Transaction
    Check if for all Excise group u2013 DLFC u2013 Company Code combination GLs are maintained or not (especially in production client)

  • Accounting document not generating for excise invoice-please help

    Dear all ,
    my issue is
    accounting document not generating for excise invoice
    we are creating accounting document in J1iin
    with refferance to billing document but the accounting docuemnt is not generating
    the accounting document for billing document is generated
    so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
    please help

    Dear G. Lakshmipathi,
    As uknow i am getting problem when i am creating the debit memo
    so is there any specific ETT for debit memo is there .because we are not maintaining delivery type to billing type here in CIN setting
    so its not goods removal through sales . so what will be transaction type for this.
    how to check the error that why the accounting document is not generated as no error log is also comming.
    so please help me in this regards.
    Thanks with Regards
    Subrat

  • FCN Document not created for SO : Message SY499-Urgent

    While Saving delivery or doing PGI or while processing billing document i am getting below info message.
    "FCN Document not created for SO " Message SY499.
    I dont know why this message started coming now. I have added my country in VI49 settings. I wonder that due to that this message is coming.
    I dont want this message to come whiel delevery processing. Pl. let me know how can this be possible.
    Regards,
    Vijay

    Hello Sheila,
    sorry - my first answer was in mistake - Status K means:
    "The transaction is processed using payment cards. The order, however, does not contain valid authorization.
    This problem occurs in billing documents for follow-up deliveries."
    Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
    and trigger this via VF02 -> Release to accounting.
    Regards Wolfgang

  • PO should not go for approval if it is from a contract

    Dear Gurus,
    This company wants to approve the contract but the POs created from that contract should not go for approval again. Please give an idea to achieve this requirement?
    Thanks,
    Chameendri

    Hi,
    We need to define Contract under characteristics of PO approval process goto SPRO > Materials Management > Purchase Order > Release Procedure fro Purchase Orders > Edit Class
    Enter Class : for example POREL , class type 032 > Char tab
    Enter POCONTRACT under characteristics
    Enter Contract Number  under description
    Enter CHAR under Data Type
    Enter 10 under No.of characters and 0 under decimal places
    Then go to PO release strategy > Classification
    Enter Contract Number under characteristic Description and Value leave it blank
    this is what we did in our company and it is working fine.
    POs created with referece to approved contract is not triggering to approval process again.
    I dont know whether you are still waiting for the answer.
    Please try and let us know the results, if it works.
    Thanks.
    Udaya

  • Follow on Document not created for the Purchase Request.

    I can able to create a purchase request for the  material with quantiy equal to  or more than 16. If I create a purchase request for the same material with quantity less than 16., Follow-on Document not getting created. I checked the transaction BBP_PD, it does not show other status like Shopping card ordered , approved, Items in Transfer Process and Follow-on Document created. Any Reason for this.?

    Hi,
    please check if there is any tolerance enabled
    Regards

  • FI DOCUMENT NOT POSTED FOR 201 MOVEMENT

    HI ALL,
    In one of the my client having one issue for particular one material ,FI document not posted ,while issue the goods to shop floor 201 movement type & same document we cancelled ,but FI document posted. Same cancellation document again cancelled.
    How do we post / Release the same 201 Movement type material documet to FI. Due this my valuation agaisnt GL is inconsistency in MB5L AND MB5B report. Could u please help.
    Rgds
    SumaMani

    Hi,
    the following things have to be concidered for your issue
    1. FI Document is not generated if the price of material is ZERO
    2. check whether during the movement type 261 the material price is ZERO or not
    3. Check whether during the cancellation of that document the material price is changed some how?
    i my opinion during the 261 for that material that material price was Zero and no FI Document was generated and during the cancellation of that document that material has got some price so the FI Document was generated
    Best Regards,
    Ravi Reddy,

  • Acctg document not created for cancellation invoice

    Hi all,
    We have a vehicle sales order created with payment card. The SO contains one item for vehicle and one item for parts. The items were delivered and invoiced separately. Hence, SO has one vehicle sales invoice (VSI) and one parts sales invoice (PSI).
    The standard procedure was to post VSI first before the PSI. Accounting documents have been created when both invoices were posted. However, there was a need to cancel the PSI. When this was done, cancellation invoice was created but there was no accounting document posted for the cancellation.
    I tried simulating the scenario in our test server and cancelled VSI 90000081 first before cancelling PSI 90000082 to test if this can be an alternative solution. Cancellation for VSI was posted successfully but error persists for PSI cancellation.
    Order 67 06/19/06 Completed
    . Delivery 80000081 06/19/06 Being processed
    .. Picking request 20060619 06/19/06 Completed
    .. GD goods issue:delvy 4900000293 06/19/06 complete
    .. Invoice 90000081 06/19/06 Completed
    ... Accounting document 2000077 06/19/06 partly cleared
    .. Invoice cancellation 90000084 06/19/06 Completed
    ... Accounting document 2000079 06/19/06 partly cleared
    . Delivery 80000082 06/19/06 Completed
    .. Picking request 20060619 06/19/06 Completed
    .. GD goods issue:delvy 4900000294 06/19/06 complete
    .. Invoice 90000082 06/19/06 Completed
    ... Accounting document 2000078 06/19/06 Not cleared
    .. Invoice cancellation 90000083 06/19/06
    .. Invoice 90000085 06/20/06 Blocked
    Accounting status of 90000083 (where error occurs) in VF03->Header->Details is set to K or <b>Accounting document not created (authorization lacking)</b>.
    Any inputs? Thanks in advance.

    Hello Sheila,
    sorry - my first answer was in mistake - Status K means:
    "The transaction is processed using payment cards. The order, however, does not contain valid authorization.
    This problem occurs in billing documents for follow-up deliveries."
    Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
    and trigger this via VF02 -> Release to accounting.
    Regards Wolfgang

  • Excise Accounting document not generated for Imported Asset GR

    Dear all,
    Excise accounting document is not generated for imported asset goods receipt(MIGO)
    but "C" Register part 2 no. is generated,usual accounting document is generated for GR,
    Asset is Dr to GR/IR
    Process is
    1. Create asset purchase order with acct. assignment "A",
    2. Customs miro based on p.o.
    3. Do GR with excise
    4. Post invoice for orginal vendor.
    What will be cause of this problem ?
    How to solve this issue ?

    The above issue may be due to Accout assignmnet -A . Check your accout assignment  in spro -mm-purchasing -accout assignment - Asset A - GR Non valuated has Ticked on . If it is ticked on - No Fi entry will happen at the Time of GR .
    The reason being , if an FI entry happen for the first time , asset is capitalised . To avoid this GR is made in ur config as this .
    rewdzzzz is full if correct
    Edited by: manu m on Apr 24, 2010 11:11 AM

  • My iPad say document not supported for all in one 6450 printer

    I have installed the e print for my iPad and while trying to print, it says document not supported. I have a wireless All in One 6450 Printer

    Eddy955, hope you are doing well and welcome to the HP forums;
    What document are you trying to print and what application are you using to print it.
    If you are using ePrint, bear in mind that there some limitations to the files that you can print this are the limitations in type of document and size.
    "supported format:
    Microsoft Word
    Microsoft PowerPoint
    Microsoft Outlook
    Microsoft Excel*
    Text files (.txt)
    PDF
    Images (bmp, jpg, png, gif, tiff)
    also there are size limitations for this docs
    the document cannot be larger than 5 mb's and it cannot be more that 10 attatchments, for a more comprehensive list go to this link.
    https://h30495.www3.hp.com/help/
    Do not hesitate to let me know if you need more assistance. I will do my best to help you.
    RobertoR
    ▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Accounting document not generated for cancled credit memo

    Hi,
    its related to rebet
    den cancled credit memo.but accounting document not generated.
    after that created new rebet and accounting document generated..so in document flow status showing open for cancled credti memo. how to delete or clear this? or how to cancle this?
    kindly help me on this,
    Thanks,
    Regards,
    Minesh Soneji

    Error message:
    validation user has got error " Doc.Date<=Post.Date and  Postind Date <= Current date"
    kindly help me on this..
    global docs creaetd.........................................completed
        global invoice created... ...............................completed
             accounting document created.............not cleared
                 cancle of credit memo ......................open
                     global docs created........................cleared
                          accounting docs created ........cleared.
    i need to remove this status cancle of credit memo , status is open, there should be accounting docs...
    kindly help me on this..
    this is related to rebet.
    thanks,
    minesh soneji

  • Billing document not relenvent for invoice list

    Dear forum members,
    For one sales area I can create a invoice list from a billing document, but not for the other.In debug mode first one is relevent for invoice list processing ( VBUK-RELIK), but for another sales area ,thus staus is not relevent.
    Partner detemrination was different for both the above sales area.This was the only differnce. Partner determination is correct in both.What can be the other possible reasons for the status NOT RELEVENT for invoice list.
    Best Regards,
    Kanwal

    Dear Goyal,
    -->Check the configuration settings if you are using diffirent Invoice documents in two sales areas.
    IMG Path is SPRO>Sales and Distribution>Billing>Billing documents>Invoice lists.
    -->Check the data in the customer master in the transaction VD02.
    Go to Sales area data tab-->Billing document here you check whether you are maintaining the Invoice list dates or not.
    -->Check the Partner determination procedure assignment to the Invoice List type at Header level and item level.
    Because you are mentioned that partner dtermination wad different.
    Header assignment path.
    IMG>SPRO>Sales and Distribution->Basic functions>partner determination>set up partner determination.>Set up partner determination for billing header-->Prtner determination procedure assignment.
    Item assignment path
    IMG>SPRO>Sales and Distribution->Basic functions>partner determination>set up partner determination.>Set up partner determination for billing item -->Prtner determination procedure assignment.
    I hope it will help you
    Regards,
    Murali.

  • Accouting document not created for PGI

    Dear All,
    I have done PGI for Delivery document.
    The movement type is 601 and Special Stock indicator is E (Order 0n Hand).
    While PGI material document has been created but accounting document has not created.
    Waiting for your valuable suggestion
    Thanks & Regards,
    Ratish

    thanks for the reply.........
    for movement type 601 and without special stock indicator accounting document has been created along with material document.
    but for the MTO Scenario the material which are dispatch with special stock indicator "E" with movement type 601. for this scenario material document has been created without Accounting document.
    Waiting for the reply.................
    Regards,
    Ratish

Maybe you are looking for