Document Number appearing twice.

Hi Experts,
In one document, particular line item of vendor payment is appearing twice with same document number, document type is KZ when checked in FBL3N. User, Date, Time and amount are identical. When checked Vendor account for the same, there is only one line item with respect to above. This is a special G/L transaction as Advance payment.
I also checked Table GLT0 for the same, there is only one entry.
Can anyone advice me, what could be the error for double entry in FBL3N & how to rectify it ?
Madhu.

Hello,
Document numbers are linked to time stamp. There cannot be double doucument numbers with the same number time stamp.
Please recheck your criteria.
However, you can search service.sap.com for "Overlapping of document numbers"
Regards,
Ravi

Similar Messages

  • A Characteristci appears twice under the Rows Column on the left hand side.

    Hi All,
    According to the requirement , there are 2 Material Numbers ,1 of them is used for Compounding,which is not required in the Report,but as it is used for Compounding ,we need to place that in the rows.
    We have put tat in "NO DISPLAY" mode,but  Material Number appears twice under the Rows  column, on the left hand side of the screen, in the Portal when we execute the Report.How Can we have to display only 1 Material Number on the left hand side of the screen?
    Thanks in Advance,
    Sravani

    the left hand side of the screen is reakky vague....you should be more specific...
    Probably you need to filter out the compounding characteristics in the global filter area.
    Thanks...
    Shambhu

  • 2LIS_03_UM validation - Why would FI Document Number show in BSEG NOT MB5B

    Hi there,
    We have created a custom datastore to load data via 2LIS_03_BF and 2LIS_03_UM extractors.
    All the data is coming as expected however on the ECC side, the data validator does not see why would a FI Document Number appear in BSEG however NOT appear in MB5B?
    Without having to dig into the abap code, would anyone have experience with this type of situation?
    Also, if I am not posting in the correct forum, please advise.
    Thanks so much!
    Lynda

    closing - no repies.

  • Sales document number not appearing in Work Item.

    Hello gurus,
         I have created a WorkFlow for approval of Sales order. My problem is, the sales document number is not appearing in the WorkItem for user decision task. I am passing container variable the sales document number in the Parameter1 of the User Decision task of the work flow. Value is populated correctly in the container variable for sales document number, but fails to appear in the work item content in SBWP.
         Please suggest a solution.
    Regards,
    Dnyanesh.

    Hello All,
         Thanks for your reply.
    I am passing the value of sales document number in parameter 1 of the standard task for approval as below.
    But in my Business Workplace I do not get the Sales document number. Below is the screenshot.
    Regards,
    Dnyanesh.

  • PO number not appearing in Purchasing Document number

    Hi
    I have posted a MIRO. PO number: 4500000013. Now when i see in FBL1N & vendor open items, PO number does not appear in Purchasing Document field. Let me know how to bring the PO number.
    Edited by: Deepak Agrawal on Oct 8, 2009 11:50 AM

    Hi,
    The display of the purchasing document number for customers/vendors via the line item display is not possible. However, you can branch from the vendors/customers line item display into the document overview and there display the purchasing document number for the individual G/L account line items.
    Regards,
    Eli

  • Gaps in Document Number Assignment & Invoice Numbers Allocated Twice

    In Period End Closing Financial Accounting there is Gaps in Document Number Assignment & Invoice Numbers Allocated Twice for day-end closing. I understand the difference between the two, but why is the business process procedure a process decision between the two as opposed to a process flow that includes one after the other?
    T-Codes:
    S_ALR_87012342 vs. S_ALR_87012341
    Thanks in advance for you help!

    The report is used mostly by SOX and Internal auditors to check if there are any gaps in the document number assigment. This could be possible if due to various reasons certain numbers have been skipped and document numbers are not in sequence. Also as per some of the local reporting GAAPs there hsould not be any gap in the document numbers assignment. To ensure all this this report is checked.
    Thanks and regards
    Kedar

  • Cheque number assign twice to same Document number

    Hi
    I have this situation whereby two cheque numbers are being assigned to one document number. Neither of the cheque is void as i check in FCHN. Unsure why is this happening.
    During printout, the system skips one physical cheq and printed on the continueing cheque. (Means cheq A is clean without printout and chq B is printed with the amount).
    My user uses F-58 to print out since is only one transaction.
    I am puzzled. Need advice.
    Many thanks
    eddielim

    HI Eddielim,
    I think its not possible to assign 2 checks for a single payment document.  Reasonably one check shall be voided and another check should be vaild one.
    As you are saying the user is using F-58 as he making a single payment in the initial screen under "output Control"  tell him to check the "Do Not Void any Checks" .  I feel one check is getting voided and one is normal. 
    And also i would you to check the variant give in F110 tab " printout/data medium"  under output control - number of sample printouts, Do Not Void any Checks.
    I hope this solves your issue.
    Regards,
    Kiran Yelamarthy

  • Loops appear twice in the loop browser. Huh?

    I just installed iLife '06 and have been "messing around" with the various programmes. One thing I noticed was that exactly the same loops appear twice in the loop browser. Not all loops are doubled, which is obviously what is confusing me. Is this normal (not my confusion!!)?
    I've checked the folder in the library and each loop is only available once, but GarageBand insists on having two of quite a number of loops. Any tips would be greatly appreciated, as I haven't found any way to delete just one of the loops (deleting the file obviously deletes both . . .)
    Thanks in advance,
    Steve
    G5 Dual 2.3, G4 Powerbook   Mac OS X (10.4.3)  

    Do you really have only one copy of each? Do a Finder/Spotlight search. There are several places where the loops could show up:
    - the general Library/Audio folder
    - the user Library/Audio folder
    - the general Library/Application Support folder
    - the User Library/Application Support folder
    Did you install over an old version of GB? That might explain the duplicate loops. And the "single" loops that were either part of your old installation and not of GB3 or vice versa.
    In order to repair that, you should trash the duplicate loops and the content of the Loops Index folder and then drag the remaining loops into the loop browser.

  • Migo reference document not appearing in miro for frieght conditions

    Dear all,
    I ahve done migo for a po and i have checked GR based invoice in PO.When i am doing MIRO i am not getting the migo reference number for frieght condition where as the migo reference number is appearing for base price.How to get that migo reference number for frieght conditions also.
    thanks in advance
    regards
    vithal

    Sometimes the the MIGO creator might have reversed the same. In such cases the reversal document may be with different number in the same series and both posted & reversed documents will not appear in MIRO. Since you might checking with posted document number, you are seeing the blank in MIRO. In such cases, just enter the PO number in MIRO, give date & reference number press Show PO structure button in the left corner. You will find the following screen
    Expand the required once. The following screen appears. In this both positive & negative numbers with same reference & document type appearing are the reversed documents.
    Hope this is clear

  • Error  in document number while posting the material

    Dear experts
    while posting the stock  MB1C  for the material  the error  is  " incorrect doc number $  1 .select doc number between   800000100  and 800000199.
    how to  correct  this  error. where  to check this  number ranges  of  document.
    Thanks  &  Regards.
    Erfan.

    Hi
    The document type, which is integrated for Material related posting is appears to be configured as "External Document Number Ranges".  In the event of external number ranges, MM transaction tries to post same document number individually at MM system and propose same number in FI for Accounting Posting.  If the proposed number is not within document number ranges, then you would expect this kind of errors.
    What you need to do is:
    1.  See the document type, which is being posted and set correct number ranges as per MM transaction document type number ranges  or
    2.  change MM transaction number rages in order to FI document number rages
    Hope this helps

  • How to post goods receipt without FI document number

    Hi friends,
    Is it possible to create a Good Receipt without creating any FI document number?
    Regards,
    G G Reddy

    Hi Vikas,
    Now i am doing Historical data migration project. for this project last 7 year data we will move to New sap systems. we will get the data from standard tables from the all module like FI/CO,MM and PS.
    So in FI data i done through z program. in MM side previsiously only PO data only  in the scope.but recently they added Good movements also. so whenever the MM consultant will do the Goods receipts the fi documents will come in to piture. it is duplicate data available twice.
    Because I uploaded FI data which is linked to MM integration. so now my problem is whenever the MM Consultant wii upload the Goods Receipts, there is no Fi document happen. so please provide any soluation about this.
    so please give me u r inputs on this
    Edited by: sachinreddy on Dec 26, 2011 10:45 AM

  • F-32, clear customer - document number

    Hi,
    My client is using F-32 to clear customer items, it selects document no. as selction crieteria. it enters document number wrongly and press enters, system stores document no. user get back by pressing F3 once and select choose open items whr he again follow the same process as mentioned above and execute process open items. line items appears with current as well as last document selectin. now user says i want only current selectiion without getting out of Tcode, he doesnt want the system store the doc no.
    on this i replied it is std functionality/feature given by sap whr if user misses or want to use diff diff selction crieteria this feature is useful. But client is not ready to accept it as a feature. he is sayin it is system bug.
    Please advise.
    Thanks
    Homi.

    Hi,
    Better You can post a query to Service.SAP.com with your SID (S000xxxxxxx) . So that they will guide your client properly. If it is a bug they will send a patch file. and they will issue SNote for this.
    Thanks
    Chandra

  • Open the field purchase document number in vendor invoice

    Hi,
    I've to open the purchase document number field in the vendor invoice transaction (FB60) for the reconciliation vendor account?
    I've done these operations in customizing:
    - set the field purchase order in the Field status group like optional
    - set the tield purchase order in the posting key control (31 and 21)
    Could you suggest me how to open the field?
    Tks!
    Regards,
    Gaetano

    Hi,
    Can you please provide me the solution for this as I too am facing a similar problem. While posting an entry using FB01/F-43, for posting key 31(Vendor Invoice), despite making Purchasing Document field optional in field status group of the posting key as well as Reconciliation (GL) Account, the Purchasing Document field is not appearing.
    Thanks and Regards,
    Sumita

  • Format of reference document number is invalid  Message no. 8A556

    Dear Expert,
    I have problem while executing transaction Manual Posting incoming invoice with t-code FB60. The error message shown as written above "Format of reference document number is invalid  Message no. 8A556"
    I have check the customizing on document type and number range, they are all standard SAP, nothing strange as far my concern.
    Could any one give any idea on this problem.
    Thanks in advance
    Irhasni

    Dear Experts,
    I have tried to investigate this problem but still have no solution for doc. type KR (Posting vendor invoice)
    During investigation on this problem, I did a simulation posting using document type other than KR (assign manually) either by t-cod FB60 or F-02 or F-43, I chose doc. type KA and SA, there is no error when using this doc type, it create Accounting document and Tax line item also appear.
    From the simulation I did with this problem, the  problem seems on Document type KR (default doc. type for Vendor Invoice). I suspect, it might some setting at other modul likely at MM that control the "Reference" field during document entry...  eventhough this field is not set as mandatory at OBA7, it's still saying the same error message.
    Is there anyone have any ideas about problem in document type KR?
    Thanks in advance
    Irhasni

  • How to see the DMS document number in PO / PR?

    Dear experts,
    I am using DMS. I have created a document in DMS and I have linked it to the PR & PO line items. Till it is fine.
    But I am not able to find out this document in PR / PO. Can some one help me how can I find the document number in PR / PO??
    Thanks in advance.
    Regards,
    Praveen

    In the ME23N screen , there is icon which likes a pin on paper between the Item over screen and the Item screen . If you click this icon , a new window with all the DMS documents linked to the PO would appear.
    This is in the same line of the delete , lock , copy etc ..sequence .
    -Hari.

Maybe you are looking for

  • How do I set custom frame size in Premiere Pro 5.5 sequence.

    I need to set a custom frame size in Premiere Pro 5.5. I can't edit a preset so how do I create my own?

  • Acrobat Pro 9.3 crash when adding watermark

    Hi All, my acrobat crash when I add watermark.  I am running Window 7 and have check the compatibility box thinking this will resolve the issue. Any solution to this issue?

  • Selective Deletion of Recrods in PSA

    Hello All We are using BI-7.0 frontend. While loading data to a master data infoobject we are facing a abort due to incorrect time field. This records are actually unwanted and are results of a code written in enhancement,thus we we want to delete th

  • PS CS6 Extended won't download from Cloud

    I already own Ps CS6 and after buying a subscription to the Cloud, tried to download PsCS 6 Extended, but it wouldn't come through. I tried to download the trial version before I purchased the subscription, but that didn't come through either.

  • Accomodating Macintosh HD to personal needs

    As a new Mac user, I have tried accomodating the HD to my personal needs, and unfortunately, this resulted in loosing all my files (worst of all, all my most recent not-backed-up files). What I did was to place all my files directly in the very left