Document protocol revision and document type

Hi B2B gurus,
Could you please tell us what should we configure document protocol revision?
What should i need to give the rivision number( either EDI VERSION(4010, 5020) or normal version(1.0,4.0,5.0)
and Documnet type( can we give Name=850_doctype and version 4010, before we created a name =850 and i uploaded an ecs file, now i want to upload another 850 ecs file with the different name...? is it possible)
Regards

Hi Ramesh,
Thanks for your response.
I cross checked with Oracle Support, they said that we can create a document type as 850_docType,
Actually my scenario is
Our supplier has given 2 ecs files for 850,
1. 850 version 4.1 of 5020
2.850 version 5.0 of 5020
I want to use both the ecs files for the same trading partner.Becasue of that I want to create a two different business protocols... with 4.1 and 5.0
Regards

Similar Messages

  • How to get the document type, name and revision from the search page cv04n

    Hello,
    After performing cv04n and getting a list of documents satisfying the search criteria, how can I then get the document type, name and revision of the selected document using ABAP?
    Thanks

    HI,
    IN table DRAW... u have Document type, Version and document number.
    In Table DRAT also u get Document Type, Version, Number and Description of Doucment.
    Regards
    SAB

  • Oracle B2B not picking up Document type and document version from JMS msg

    Hi,
    We have developed guideline and schema for a custom positional flat file using Oracle B2B Document Editor. We were able to creat and deploy the agreement. But when we drop a message on a Queue being listened by Oracle B2B. The document type and version values were empty. We got the following error,
    Error Code B2B-50083
    Error Description Machine Info: (xxxxx) Description: Document protocol identification error.
    Error Level ERROR_LEVEL_COLLABORATION
    Error Severity ERROR
    Error Text Document protocol identification error.
    This is our Java code for testing that drops the message, and I can see the JMS header with these values.
    message.setText(messageText);
    message.setStringProperty("FROM_PARTY", "CT-Sender");
    //message.setStringProperty("FROM_PARTY", "RemoteTP");
    message.setStringProperty("TO_PARTY", "MyCompany");
    message.setStringProperty("DOCTYPE_NAMEe", "CT");
    message.setStringProperty("DOCTYPE_REVISION", "CT-AES");
    We were able to test a 850 document successful through different document and agreement ....
    Thanks
    John

    We have uploaded the ecs and xsd files. Are they the parser files you are mentioning? The following is the information we have for the transaction. I am just surprised whty the Document Type and others are empty.
    Thanks
    John
    Id 0A9F196E132459F393C00000184B4897
    Message Id 0A9F196E132459F392300000184B4893
    Refer To Message Refer To Message
    Sender Type Name
    Sender Value CT-Sender
    Receiver Type Name
    Receiver Value MyCompany
    Sender CT-Sender
    Receiver MyCompany
    Agreement Id
    Agreement
    Document Type
    Document Protocol
    Document Version
    Message Type REQ
    Direction INBOUND
    State MSG_ERROR
    Acknowledgement Mode NONE
    Response Mode ASYNC
    Send Time Stamp 09/07/2011 04:40 PM
    Receive Time Stamp 09/07/2011 04:40 PM
    Document Retry Interval(Channel) 0
    Document Remaining Retry(Channel) 0
    Document Retry Interval(Agreement)

  • PO and MIGO document type

    Hi,
    When user creating PO and goods receipt ,he doesnot getting po document type description(in MIGO also) ,only he is getting po document type in header as NB (it shoulb be NB Stadards po). I have checked in options and expert tab also ,still issue not yet resolved.plz advise soon.
    Thanks,
    Sunny

    Hi,
    Follow the steps to have value like NB Standard PO:
    Go to ME21N screen, in Standard toolbar click
    Customize Local layout (Alt + F12) - >Option- >Expert--- > (select check box) of Show Keys in All Dropdown lists --- > apply --- > Ok
    Now go to ME21N screen, you will have NB Standard PO instead of NB
    Regards,
    Biju K

  • How to create a new document type for PO and Requisition

    Hi All
    Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly. 
    Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
    Thanks, Ros

    Hi,
    1. You can create new PR and PO docu types at the following path:
    For PR docu type:
    First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
    Then create PR docu type at below path and assign no. range to PR docu type here only
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
    For PO docu type:
    Follow same procedure as mentioned for PR docu type. Path is
    SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
    SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
    If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
    Regards
    Chetan

  • Reading the description of Sales document type and Profit centre from table

    Hi
    I want to print the description of Sales document type and Profit center on output
    I have checked in table TVAK and CEPC  but i am unable to pick description against the code
    Can anyone please suggest from where can i capture the description of sales document type and profit centre
    Thanks and Regards
    Sunil Srinivasan

    Hi
    If you have the sales document number VBELN then pass this VBELN in to table VBAK and you can get the sales document type VBAK-AUART.
    Now pass the same VBELN to VBAP table here you can get the Profit Center VBAP-PRCTR
    For sales Document type description you pass the VBAK-AUART values into table TVAKT  table and get the values for TVAKT-BEZEI is you sales document type description
    For Profit center description goto table CEPCT and enter the profit center you will get the
    KTEXT
    LTEXT
    MCTXT
    regards
    Prashanth
    Edited by: Prashanth@SD on Oct 25, 2010 12:29 PM

  • PO Document Type Without Good Reciept and Invoice Reciept

    Hi All,
    Can i configure my document type in such a way that it do not require Goods Receipt as well as Invoice Verification. I know i can do the same with Account assignment category. But what if i am not using any particular account assignment category and i want this functionality
    Lekhram

    Hi,
    I am still struggling with the basic requirement.
    You want a PO that will not be received and not be invoiced?
    If it is not to be invoiced then the price will have to be zero as well????
    What is the point of such a PO, why not just use a program to send a flat file with the basic data on it instead.
    A PO is meant to be used to request a delivery or service from a supplier, this scenario does not really seem to fit with the use of a PO.
    If you really must do it, then I would use a separate document type for the PO (just to keep these separate and to give you some extra options). Then (as recommended above) use a special account assignment category so that you can set the GR and IR off and protect the field from being changed (by leaving them blank and flagging the "binding" flags on each).
    Good luck
    Steve B

  • PO Document type and ERS default cchecked

    Hi Guys
    Need a bit of help here with an issue
    My requirement --
    When a Purchase order with specific document type is created for One time vendors the ERS check box should be ticked default in the PO Line item details in the invoice tab . Is there a user exit to full fill this requirement .
    Looking forward for an answer.

    Following are necessary customizings and preconditions for using the Invoicing Plan functionality in SAP -
    1) You must maintain the settings in Customizing for purchasing (for example, invoicing plan type, date categories, date descriptions, and date sequence proposals). The related path is IMG ---> Material Management ---> Purchasing ---> Purchase Order ---> Invoicing Plan ......
    2) The Purchasing document with FO Document Type (Framework Order) must be used. This document type requires that a validity period be entered in the PO header. This specification is adopted in the invoicing plan, provided that this has been predefined in Customizing for the relevant invoicing plan type.
    3) The purchase order item must have an account assignment.
    4) The Logistics Invoice Verification must be used.
    5) The vendor must have agreed to use the automatic invoice creation facility (since we will use automatic settlement to create the invoice). In this case, the 'AutoEvalGRSetmtDel.' indicator must be flagged in the vendor master record.
    Furthermore, once Purchase Order is created with order type FO, ensure that the indicators for GR/IR control have been set correctly on the item detail screen. The Goods Receipt indicator may only be set in combination with the Goods Receipt Non-Valuated indicator. The Invoice indicator must be set. For the automatic creation of invoices, the ERS (Evaluated Receipt Settlement) indicator must be also set. A further prerequisite for automatic settlement is that a tax code must be entered in the purchase order.

  • PO - Document Type FO and Item Category B - Can they be transferred to SUS?

    Hi SDN
    We are using R/3 4.7 with SRM 5.0 - Classic Scenario and XI 4.0.  We are just about to launch an SUS project to put our PO's on SUS for our suppliers.  Our organization is dealing with PO's for both Goods and Services.  As we know that there are no problems about putting the GR-Type PO's (NB type) on SUS but I would like to know if it is possible to transfer PO's that would be from the Document Type FO and Item Category B (Blanket PO) to SUS and ensure that our suppliers can do the entire PO Acknowledgement, PO Change and post the Invoice via SUS.  If not, what are the options for our R/3 - SUS installation?
    Thanks!
    Eric L.
    Edited by: Eric Longpré on Apr 23, 2009 12:57 PM

    Hi,
    This has been discussed several times on this FORUM..Pls refer the foll threads for more details:
    PR document type in the back end system
    Change "Document Type in R/3 System" in SC
    Changing document type of PO backend
    Re: Change PO number/document type
    BR,
    Disha.
    Do reward points for useful answers.

  • Business Transactions and Document type

    Hi eXperts !
    Can anyone please explain these business transactions like when they are created, what is the document type related to these and which one should I use to see the Amount paid to the Vendor (Actual Payment)
    KOAE     Actual Settlement CO External
    RFBU     FI Postings
    COIN     CO Interface     
    RKU1     CO Act. Primary Cost Transfer
    KOAR          
    Actually I need to extract a report in Project systems with actual amount paid to the vendor + all the actual cost but it shows only down payment (doc. type KA if i am not wrong) not the final payment.
    Also please explain these document types because i can see them in my report but I dont really know what does it mean.
    AA     Asset posting
    AB     Accounting document
    KA     Vendor document
    TZ     Vendor Document
    KZ     Vendor payment
    SA     G/L account document
    KG     Vendor credit memo
    As these things can be better explained by FICO guys so I decided to put the question here, Thanks alot !
    Rabiee

    Thanks for the reply AP
    I'll check KZ doc. type
    what about other document types and business trans. ?

  • Authorization based on plant and Purchase order document type

    Hi
    My client has a requirement wherein a user will have authorization for transactions only in his plant. But only for Purchase order document type UB (Stock Transport Order) the user should be allowed to create for all plants.
    In short, if Purchase order document type is UB, should be allowed for all plants
                 if Purchase order document type is NB, should be allowed to only one particular plant.
    My Basis person says that such a restriction is not possible.
    Kindly suggest me on how to provide a solution to this.
    Thank U.

    Hi,
    This is possible.In this case you need to create two seperate roles.
    1)Create purchase order for all plants (This can be used in long text)
    2)Create purchase order for <plant no> plants.
    For case 1:--
    i)Populate field BSART of M_BEST_BSA with UB.
    ii)Populate field WERKS of M_BEST_WRK with '*'. SAP reccomends to fill up organizational data through organizational level tab only.So while doing this step you need to put * from organizational level tab only.
    For case 2:--
    i)Populate field BSART of M_BEST_BSA with NB.
    ii)Populate field WERKS of M_BEST_WRK with 'plant no'.
    Dont worry about the objects i mentioned those are maintained through SU24 and will be automatically pulled once you insert ME21 transaction code.
    Let me know if it helps.
    Thanks,
    Aveek

  • Custom report with  FAGLFLEXA and "Document type"

    We have new GL and we must do a custom report like this:
    Hierarchy of ProfitCentre ______Credit for mm.yyyy___ Debit for mm.yyyy 
    Profit centre 1_____________________ c1_______________d1
    Profit centre 2_____________________ c2_______________d2
    ect. ....
    The value of c1 is the sum of monthly credit for a profit centre, for a group of accounts, but only for certain "document type".
    The "Document type" is what worries me.
    I have already written a similar report with Report Painter, reading data from the table FAGLFLEXT (0FL library), but took the full credit from the account (for all "document type"), without restrictions on the document type (the table  FAGLFLEXT not contain the field "document type").
    The data I need in my report, I can see with T. FAGLB03. Double-clicking on, for example, the value of credit you go into detail, and data can be selected for different "Document type". I still do not understand how it works and which tables use the T. FAGLB03 to have these data in detail.
    Please, help me what exactly to do?My questions are these?
    My principals questions are these:
    1 . I think, inevitably, i have to link two tables: FAGLFLEXA (the one with the given to him) and GKFP that contains the field BLART (Document Type). This is the right way? Is there another way?
    2 This report can be create with one of SAP tools: Report Painter, SAP Query, ... or the only solution is to write a program in ABAP?
    3.  If i'm not asking too much, you could give me a step-by-step description of how i should proceed?
    All suggestions are welcome.
    Thank you in advance. Many points to assign who will help me to solve this problem

    I know PowerShell can help you with the Get-SCSMRelatedObject command but you would have to write a small script to get that to work en mass.
    http://smlets.codeplex.com/

  • Purchase Order Document Type and Account Assignment

    Hi  ,
    We have a requirement to control Account Assignment in Purchase Order Item line based on the Document type selected on the Purchase Order header.
    Like if user selects Purchase Order document type "ZNB" (Customized created) , then he will only able to select "K" or Blank or "P" as account assignment and similary we want to limit other Account assignments based on the Purchase Document type.
    How can we make this Control settings?
    Regards
    Shrey

    Hi,
    You can't really limit the account assignment categories per document type, at least not directly.
    You can limit the item categories that can be used for a document type via configuration:
    Materials Management > Purchasing > Purchase Order > Define Document Types
    Within this transaction you can define which item categories are valid for a specific document type.
    You can then define which account assignment categories are valid for each item category
    Materials Management > Purchasing > Account Assignment > Define Combination of Item Categories/Account Assignment Categories
    BUT
    limiting the account assignment categories that are valid for an item category will affect ALL purchase order document types that this item category is valid for. And you can't create your own item categories as this is a SAP standard table that can NOT be altered.
    Regards,
    Monika

  • Different accounting document type "WE" and "RE"

    Hi,
    I am currently coding to extract data from internal table BKPF and is facing a problem with field BLART (document type).
    Understand that there are records for "WE" (Goods Reciept) and "RE" (Invoice Receipt) found in this table.
    May i know what are the differences between these 2 type of documents?
    Can both WE and RE co-exist for the same account document?
    Does RE means goods receipt already done?
    Thanks.
    regards,
    CL

    solved

  • Document Type and Plant

    Hi,
    How to assign Document type to Plant. When I checked with our SD consultant he told Document type is independently configured and it's assigned to sales organization and not plant. Just want to check whether any report/view available to see the list of Sales document type assigned to a particular plant/sales organization.
    Thanks in advance.
    Regards,
    Balaji Viswanath.

    Hi balaji
    we cant assign sales document type to plant.  we  assign sales document type to sales orgn. just bcoz of simple reason that we create sales order with the data of sales area , sales office ,sales grp and not plant. bcoz we assign plant to material master data ,as we  need sales area for the sales doc type , for material also we need plant. bcoz material is stored at plant and storage location level.for that purpose only we create a material with plant,storage location , sales orgn, dist channel.
    Reward if useful
    Regards
    Srinath

Maybe you are looking for