Document sequence in GL, R12 - query mode

Hi!
General Ledger responsibility, Enter Journal form.
When I enter and save a new journal I get Document Number. But when I enter query mode and I do my searching for this specific number, field (Document Number) is protected!!
Do I missing something? Maybe some profile option?
Please help.
Thank you.
Best regards.

Hi,
I presume that you are trying to search for the JV through Enter Query (F11) mode and must not be able to enter any Document Number because the field is protected in query mode.
If you want to search for Journal based upon the document number, click on Find. In the find journals window, click "More" Button and there you can search based on the document number.
I hope it is clear.
Gajendra

Similar Messages

Document Sequence General Ledger Cloud Financials

Could anyone please assist by providing the configuration steps to enable document sequencing for manually created journals in Cloud Financials.
Thanks

Hi,
I presume that you are trying to search for the JV through Enter Query (F11) mode and must not be able to enter any Document Number because the field is protected in query mode.
If you want to search for Journal based upon the document number, click on Find. In the find journals window, click "More" Button and there you can search based on the document number.
I hope it is clear.
Gajendra

Document Sequencing in Directory Browse Help

I need to resequence the order of the documents (cards) view when in browse mode in the Documents Directory. I need to reorder them by the card name instead of ordering by the cards ObjectID, in which is by default its sequencing them now. What do I need to do in BrowseDocViewHelper.CS or the DirBrowseDP.CS objects?? Am I looking at the right direction here? Please point me to the right class objects to modify to get these results... Much obliged in advance for help...
Ray Salgado, State of Maryland, [email protected]

Hmmm... That is strange then, this could be a bug. This is the first thing we did. Went in the Folder Editor, there is a section there for "Sorting", an option of "Order this way when browsing" we had set to the "Name" property. We did the same thing for the "Order this way when Editing" option. And yet as soon as I set the Browse Mode again, it orders the documents in reverse, like if it orders by ObjectID. I will report this to Tech Support.

***Document Sequence assignments***

We are setting up/ loading Document sequences and assignments for the year 2008 through the forms Document Sequences ("Setup->
Financials->Sequences->Define") and Sequence Assignments ("Setup->
Financials->Sequences->Assign").Presently we are loading the document sequences
manually and sequence assignments using data loader tool.
The problem we have is since the no. of assignments are huge (we need to load for each country),
its taking lot of time for loading. We need to load these assignments for many
modules like Oracle General ledger, Oracle Payables, Global Accounting
engine...etc and in all the instances. Put together we need to load around
30,000 records so it’s really laborious and time consuming with data loader.
Could you please let us know is there any other way to load these sequences
programmatically like any open interface or API.
Thanks,
Praveen.

Shanks,
Review the following notes:
Note: 461142.1 - ARXRWMAI - APP-FND-01702 Automatic Receipt Numbering Not Working
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=461142.1
Note: 579960.1 - R12: How To Define Doc Sequences for Gapless Sequence Type To Avoid APP-FND-01702 Error
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=579960.1
Regards,
Hussein

Document sequence in purchasing... please help

Hi all,
Can anyone please give me a detail on document sequence in purchasing...
Any link or document is required to give a presentation..
Thanks in Advance

Hi;
Please check purchasing doc from below links:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
For r11:
http://download.oracle.com/docs/cd/A60725_05/r11_doc.htm
Also see:
PO Document Sequencing
PO Document Sequencing
http://anilpassi.com/apps_tutorials/scm/Procurement_Contracts_In_R12_Steps.pdf
Regard
Helios

Enter Query Mode with Block Based on Stored Procedure

How can I get the ENTER QUERY mode to work when the data block is based on a stored procedure?

Thank you for your review.
Because the package is long, I stripped most of it out, but left the basics. After I stripped out the code, I ran the new code under a new user. Under the new user I built I new form, tested it, and I still cannot use the ENTER QUERY mode to retrieve the correct record. Query always returns the first record. I have included table structure and 3 test records.
CREATE TABLE FR_Charge
(      FR_Charge_ID               NUMBER(8),
     FR_Charge_Code               VARCHAR2(8) CONSTRAINT FR_Charge_Code_nn NOT NULL,
     FR_Charge_Code_DESC          VARCHAR2(35),
     FR_Charge_Code_CMT          VARCHAR2(50),
          CONSTRAINT FR_Charge_pk PRIMARY KEY (FR_Charge_ID)
CREATE SEQUENCE FR_Charge_SEQ;
INSERT INTO FR_Charge
VALUES(FR_Charge_SEQ.NEXTVAL,'0.0WS','E-Mail Notification', NULL);
INSERT INTO FR_Charge
VALUES(FR_Charge_SEQ.NEXTVAL,'0.1', 'Shipping', NULL);
INSERT INTO FR_Charge
VALUES(FR_Charge_SEQ.NEXTVAL,'0.12', 'Shipping Charges', NULL);
--Package follows
CREATE OR REPLACE PACKAGE DataCard_Pkg
AUTHID CURRENT_USER
AS
     -- The following records defines the data structure needed by the FR_Card.
     TYPE FR_Charge_Record IS RECORD
     (     FR_Charge_ID                    FR_Charge.FR_Charge_ID%TYPE,
          FR_Charge_Code                    FR_Charge.FR_Charge_Code%TYPE,
          FR_Charge_Code_DESC               FR_Charge.FR_Charge_Code_DESC%TYPE,
          FR_Charge_Code_CMT               FR_Charge.FR_Charge_Code_CMT%TYPE
     -- REF CURSOR definition used by the query procedure.
     TYPE FR_Charge_REFCUR IS REF CURSOR RETURN FR_Charge_Record;
     -- INDEX OF TABLES used for the DML Operation procedures.
     TYPE FR_Charge_Table IS TABLE OF FR_Charge_Record
          INDEX BY BINARY_INTEGER;
     --Define Procedure Specifications
     PROCEDURE FR_Charge_Query (DMLResultSet IN OUT FR_Charge_REFCUR);
     PROCEDURE FR_Charge_Lock (DMLResultSet IN OUT FR_Charge_Table);
     PROCEDURE FR_Charge_Insert (DMLResultSet IN OUT FR_Charge_Table);
     PROCEDURE FR_Charge_Update (DMLResultSet IN OUT FR_Charge_Table);
     PROCEDURE FR_Charge_Delete (DMLResultSet IN OUT FR_Charge_Table);
END DataCard_Pkg;
CREATE OR REPLACE PACKAGE BODY DataCard_Pkg
AS
     PROCEDURE FR_Charge_Query (DMLResultSet IN OUT FR_Charge_REFCUR)
     IS
     BEGIN
          OPEN DMLResultSet FOR
          SELECT FR_CHARGE.FR_Charge_ID,
               FR_CHARGE.FR_Charge_Code,
               FR_CHARGE.FR_Charge_Code_DESC,
               FR_CHARGE.FR_Charge_Code_CMT
     FROM FR_Charge;
     END FR_Charge_Query;
     PROCEDURE FR_Charge_Lock (DMLResultSet IN OUT FR_Charge_Table)
     AS
          x_index NUMBER := 1;
          x_count NUMBER := DMLResultSet.COUNT;
          x_dummy_var VARCHAR2(1);
     BEGIN
          FOR x_index IN 1..x_count LOOP
               SELECT 'X'
               INTO x_dummy_var
               FROM FR_Charge
               WHERE FR_Charge_ID = DMLResultSet(x_index).FR_Charge_ID
               FOR UPDATE NOWAIT;
          END LOOP;
     END FR_Charge_Lock;
     PROCEDURE FR_Charge_Insert (DMLResultSet IN OUT FR_Charge_Table)
     AS
          x_index NUMBER := 1;
          x_count NUMBER := DMLResultSet.COUNT;
     BEGIN
     FOR x_index IN 1..x_count LOOP
          INSERT INTO FR_Charge
          (      FR_Charge_ID,
               FR_Charge_Code,
               FR_Charge_Code_DESC,
               FR_Charge_Code_CMT
          VALUES
          (     FR_Charge_SEQ.NEXTVAL,
               UPPER(DMLResultSet(x_index).FR_Charge_Code),
               DMLResultSet(x_index).FR_Charge_Code_DESC,
               DMLResultSet(x_index).FR_Charge_Code_CMT
          END LOOP;
     END FR_Charge_Insert;
     PROCEDURE FR_Charge_Update (DMLResultSet IN OUT FR_Charge_Table)
     AS
          x_index NUMBER := 1;
          x_count NUMBER := DMLResultSet.Count;
     BEGIN
          FOR x_index IN 1..x_count LOOP
          UPDATE FR_Charge
               SET FR_Charge_Code = UPPER(DMLResultSet(x_index).FR_Charge_Code),
               FR_Charge_Code_DESC = DMLResultSet(x_index).FR_Charge_Code_DESC,
               FR_Charge_Code_CMT = DMLResultSet(x_index).FR_Charge_Code_CMT
          WHERE FR_Charge_ID = DMLResultSet(x_index).FR_Charge_ID;
          END LOOP;
     END FR_Charge_Update;
     PROCEDURE FR_Charge_Delete (DMLResultSet IN OUT FR_Charge_Table)
     AS
          x_index NUMBER := 1;
          x_count NUMBER := DMLResultSet.Count;
     BEGIN
          FOR x_index IN 1..x_count LOOP
               DELETE FROM FR_Charge
               WHERE FR_Charge_ID = DMLResultSet(x_index).FR_Charge_ID;
          END LOOP;
     END FR_Charge_Delete;
END DataCard_Pkg;

[Solved] Problem with LOV and 'enter query' mode

Hi all,
I'm kind of new to Forms and I'm having some problems that I'm not being able to resolve. I already search it on the net, but nothing relevant came up. If anyone could help me I appreciated it.
In my form I have some fields, and in one of them I have a LOV, and almost everything works fine. I inserted data, changed it, deleted it and all it's ok.
But when I change to 'enter query' mode, when I try to search for data on the LOV field it ignores what I write.
That is, for it, it's the same if I make F11 -> write 'aaaa' -> ctrl + F11 or if I make F11 -> '%' -> ctrl + F11.
It behaves the same way, shows me all the records.
Probably I'm missing something basic, but I'm not getting it...
Thanks,
Ana

when you create a lov by wizard the lov and record group have always the same name..
the problem is that the item is NOT based in the tabe.
what kind of query do you execute if you choose something from a love which is not based on the db?
i mean, this item has no influence on the query of the table, so whatever you choose it's like a "select * from table"
i hope i was clear

File Upload applet not opening in Query Mode

File Upload Applet is opening in Query Mode in Siebel 7.5, where as in Siebel 7.8 its not opening in Query Mode.
Should anything be changed in CFG? or siebel restricted this?

Hi,
There is a property called "Auto Query Mode" in the applet. Check whether this has been set to "New Query" in 7.5. If so the applet will be opening in Query Mode automatically. If this property is blank, in 7.8, the applet will not be opening in Query mode. Check and let me know.
Regards,
Joseph

How to put the form in Query mode

Hello
Please let me know how to put the form or block in Query mode , so that when i run the form it should be in Query mode . I have seen properties of SET_FORM_PROPERTY and SET_BLOCK_PROPERTY but cannot find one
Thanks

QUERY mode? Did you mean, that you can only QUERY without changing data.
This is the QUERY-ONLY-mode, which can be started e.g. call_form
this is the help for that topic:
PROCEDURE CALL_FORM
(formmodule_name VARCHAR2,
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
data_mode NUMBER,
paramlist_name VARCHAR2);
query_mode
NO_QUERY_ONLY (The default.) Form Builder will run the indicated form in normal mode, allowing the end user to perform inserts, updates, and deletes from within the called form.
QUERY_ONLY Form Builder will run the indicated form in query-only mode, allowing the end user to query, but not to insert, update, or delete records.

Screen Pop a View in New Query Mode

I am doing a Siebel screen pop customization and am having trouble figuring out how to open my desired view in query mode when the call comes in. I have specified my BusComp and BusObj as well as my SingleView in the custom EventResponse but am not sure where and how to specify the mode which I want the view to open in.
Anyone know how to do this?
Thanks in advance!

Thank you Fuzii,
I am a Siebel newbie and am trying to figure out how to do a few things with custom screen pops.
My EventResponse looks like this:
[EventResponse:AnsweredInboundCall]
QueryBusComp = "<busComp>"
QueryBusObj = "<busObj>"
QuerySpec = "[<fieldName>] = '{<variableName>}'"
SingleView = "<viewName>"
So the specified view will show when there is a match on the variableName. In case that variable is empty or a match is not found, then I would like to have the view open in query mode. I am doing this directly in the Siebel Admin Configuration but it doesn't seem that there is a way to tell the applet which mode to open in here.
If I set the Auto Query Mode to 'New Query' in Siebel Tools, will my specification for SingleView in EventResponse override it and show the view with that record found?
Thank you for the help :)

What is the differences between viewCriteria query modes?

Hello all,
recently we faced a performance issue in a production application. after tracing we found that the issue was caused by setting the query mode of the view criteria to in memory.
bussiness case description:
when creating a new record for table A, I want to populate one field depending on records in another table B, so I used model driven LOV.
The problem was that new records were created for both tables in the same ADF train i.e. the data for both tables were not posted or committed yet.
so by using a query based ViewObject + viewCriteria with query mode set to memory for viewCriteria I managed to populate the LOV with the correct data,
in another page I will show database records for table A with LOV to show meaningful messages to users , but I can as well create new records for table A ,but the loading of this page is very slow.
tracing:
using alter session set sql_trace=true; I found that table B is fully scanned and all rows are fetched-180000+ record-.
Problem description:
from the trace file generated found that the query issued did not have a where clause.
also found that the viewObject fetched the entire table into memory- 180000+ record,- then searched them in memory.
Solution:
changing the query mode of the viewCriteria seems to solve the issue
so in order to avoid such issues in the future ,I wanted to make sure I understand the differences between the query modes of view criteria and their impact on the performance and if there are any differences if the viewObject is based on an entity or a sql dml.
this is what I know so far -please correct me if I am mistaken-:
1)database: search the database appending the conditions of the viewCriteria to whatever the query is
2)memory: search the rows that are already in the memory.
3)both: search both database and memory.
also, in case I updated one of the records in the memory but did not yet post or commit will the fetched rows have the updated values? and if these changes fails the condition from the viewCriteria , will the rows be shown?.

The camera roll contains all the photos and videos taken on your device, as well as any saved on your device from the internet, emails, text messages, etc. The photo library contains photos synced to your device from your computer.
Only camera roll photos are synced using iCloud with photo stream. And photo stream only syncs photos, not videos.

Export in Query mode settings

Hi All,
Can anyone tell me where can we get Export in Query mode(Used to export grids to Excel sheet) settings?
One more problem with this is that the Excel that is exported on clicking on "Export on Query mode" button overwrites the current Excel working file that we are working upon. How can this be solved?

It is the behavior, Query ready mode will only pulls the members which are in Essbase (no FR calculated fields)
Regards
Celvin
http://www.orahyplabs.com

FRM-41361 Cannot navigate out of current form in Enter-Query Mode

Hi All,
I am getting the FRM-41361 error in the bottom message area when opening a form from the function navigator. The issue does not exist when opening the form from the application homepage. The form is loaded in enter-query mode, and the enter_query command is in the WHEN-NEW-FORM-INSTANCE trigger. I have checked all triggers that fire after this point for any type of navigation but do not see any. The interesting thing is, if I put a fnd_message.set_string and fnd_message.show just before the enter_query call to debug, the issue goes away entirely.
Is it possible there are security triggers firing after the form is loaded into enter-query mode that could be causing this and that the fnd_message calls are indeed buying time for those triggers to complete before the enter_query call?
Any help/advice is appreciated. Thanks!
Dan

Yes, when I looked through the triggers I made sure to look for go_block and go_item calls as well as any calls to leave the form.

Unable to see existing documents in a Custom Sharepoint 2013 Document library while saving a document directly in it using explorer mode

Hi,
We have a SharePoint 2013 doc library based on a custom template, which has been migrated from 2010.
We are unable to see existing documents in a Document library created using this template while saving a document directly in it using explorer mode, However we can save files and even see them in explorer mode, only when we try to save a new document there
directly, we cant see the old docs.
All the OOB libraries work fine.
Below is the normal behavior while saving a file, however nothing comes up when saving on this custom template library

Solved it myself guys... (Well the major part)
Got help from here...
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/blank-open-save-dialog-when-browsing-document-library-from-office-clients.aspx
and
http://www.sharepointconfig.com/2011/02/vs2010-list-definition-template-missing-file-dialog-view/
with some tweaks of my own..
Still working on it because its showing SharePoint 2010 header... And I need 2013 look...

Open form in query mode

I want to be able to open a form in query mode - is there any way to set this?
I am using Designer and Headstart.
Thanks

Hi Cathy,
You can do this. See the help topic: About the startup query mode of generated forms.
Rgds
Susan
Oracle Designer Product Management

Document sequence in GL, R12 - query mode

Similar Messages

Maybe you are looking for