Document transfer.
In ECC 6.0 we have copied all the documents attached to pm objects from 4.6B to ECC 6.0 Server ,Now we are doign Re Implementaion of ECC 6.0 server, but now we have to create documents in master data server & transfer it to production server,
Tell me how to create documents along with attached file & then transfer those documents to production server and attched to correct object.(Objects-Notification, Order, Equipment, Functional Location)
Regards,
Rishi
hi,
How to move an entire content repository from one content server to another
1.Use report RSCMSEX to export the repository from the source content server.
2.Create a repository of the same name on the target content server.
3.Use Report RSCMSIM to import the repository into the target content server.
4.Delete the repository from the source content server (if desired!).
The programs listed above cannot deal with the whole content repository at the same time.
For a slower migration, try using the program RSIRPIRL. This approach allows you to do the migation on a live system.
1.Create the new content repository on your new content server.
2.Create the new content category.
3.If using distribution, distribute the new documents to the new category. otherwise change redirected category for
DMS_C1_ST
4.Relocate using the program.
Take help from Abaper.
Benakaraj
??P
Similar Messages
-
Payroll to FI posting error message - Document Transfer has Failed
Hello experts,
We recently received the following error message when posting Payroll results to FI. This was not done using any process models.
'Document Transfer has Failed'
Does anyone know why it's coming up and more importantly, how to correct it? I looked and found an SNote: 1240870 but that seems to apply to 3PR issues not FI posting.
Anyone else had this error before? How do I correct this? Please help as this error needs to be corrected as soon as possible since FI will be closing the month of November soon.
Thanks,
SuparnaHi,
http://help.sap.com/saphelp_dimp50/helpdata/en/81/42b1884a3711d189490000e8323c4f/content.htm
The posting run has the status Document transfer has failed. Posting to Accounting did not take place.
Depending on the error that occurred, it may be a good idea to start posting this posting run once again. If the error still occurs and it is not possible to post the posting run, you must delete the posting run and create a new one.
Thanks
Umakanth -
Easy Condition Entry disable after document transfer to ECC
Dear all,
Have anyone using easy condition entry on Sales Order CRM WebUI?
I found one problem with this is, if you are using CRM and R/3 integration.
Once your document transfer from SAP CRM to R/3, easy condition entry
cannot be used (disabled) if you edit that document in SAP CRM WebUi .
Worst is, the pricing data also disappear in these easy condition entry fields.
(although the entered price value is still exist in that document - you can check
this in Win GUI or go to detail item level from Web UI)
Is this a bug? or missing configuration?
I suspect this may relate to setting in table SMOFPARSFA for para PRICINGTYPE.
Any idea? Thanks.
Gun.Will check whether same problem will occurs in CRM 7.0
-
CO Document Transfer: Planning Data to General Ledger
Hi,
I have run kp06 for cost center planning.
Subsequently when i was transferring the planning data to General Ledger system is not creating any documents. could some one through light on this
regards
AVhi,
I hv run the fagl_co_plan.
The message as follows.
Log: CO Document Transfer: Planning Data to General Ledger
Processing type Test run
Date 21.07.2010
Time 19:45:54
Check for rcrds Yes
No. of documents not posted 0
No. of docs posted with messages 0
No. of docs posted correctly 0
regards
vs -
Why system is capturing Log for Document transfer and Compliance check
Hi All
Although I have removed
TD_MAP Movement Data : Document Replication Mapping (Live)
TD_CCH Movement Data : Compliance check Document (Live)
in custom document configuration , then also system is capturing log for document transfer and Compliance check result.
If my understanding is wrong then what is the use of Log control in customs document configuration for
Document Transfer
Document Check
Thanks
Akhil..Hi Akhil,
For some situations, GTS allows you some control over the logging by specifying the Profile to use. But if you do not specify a Profile, logging still occurs using the default values in the standard code.
Regards,
Dave -
Billing document transfer to invoice document by batch
How can I do in IMG to make billing document transfer to invoice document by batch not automatic
tks!Hi,
There is a standard t-code VF04, hope can help you!
Regards
Tao -
3rd Party Posting Error - Document Transfer has Failed
Our posting run was created and the document was released. When we try to post, we get a message saying the the document has been rejected and the status is changed to "Document Transfer Has Failed".
Does anyone know how we can clear this and get the document to post?
ThanksI just had them delete the document and re-run and it posted. That still doesn't answer the question as to why it happened in the first place.
-
Hi Everyone,
I found a very interesting article TN2152: Document Transfer Strategies
In the article, it references heavy that you can do TCP betwewn the iPod and host computer, and it even makes a reference to performing a backup outside of iTunes...
"An iOS note-taking application needs to provide an easy way to backup and restore these notes, independently of the standard iTunes backup mechanism."
So - my question is this...
Has anyone found a way to look into the documents directory outside of iTunes, from within a c# windows application for example??
I do not have a problem setting up a TCP system and transferring data between PC to PC... but the USB cable and the iPod device eludes me.
Does Bonjour give the iPod device an IP, or what? Do I just send the data to the localhost on the PC system and Bonjour will grad the data and push it to the iPod??
If anyone has any ideas, please let me know
thanks
tonyHi SK,
I think it will be a total gross injustice to the robustness that the SAP GTS offers while executing global trade if you opt for asynchronous check for sales order and this is a very rare business case.
If anyhow a check is required for which the SAP GTS system is being used and if it is executed in real time rather than without any delay, then I see no reason to implement your suggestions as such.
But you can opt for asynchronous check by deactivating the functional module which is called when a sales order is saved and which transfers the latest recorded changes to the SAP GTS system.
For your second requirement, I can say if the GTS system has not checked your sales order, then how it can but a block on it instantaneously when the GTS system is up. For this you either need to wait for a while or get some customized code in play for placing a block automatically when a sales order is saved.
Regards,
Aman -
Trip Posting Document Transfer has faild
Hi Gurus,
am facing problem in transfering trip posting doc. to FI in (PRRW) system is showing mesage as document transfer has failed
where am i gone wrong and am not getting any reasong for that. pls. help
early reply appriciated
Thanks in advance
chaitraIn the table V_T706K maintained as below
WT Text Symb Expen account
9977 D-TRV +Z3
9988 F-TRV +Z4
rest of the things standard as it is
In the tableV_T030_GL
ChAct P&L stat accnt type Retained earning account
our chact X 180000 -
SD billing document (transfer between plants) error in document splitting
Dear Gurus.
I have the following scenario.
New GL activated
Zero balance on Profit Center.
SD billing document is created after the shipping of material (internal transfer) between 2 plants belonging to the same company code.
I have several user exits activated and they are not well documented if activated.
Case1.
The billing document is usually created with materials populated with the same Profit Center.
In Tr VF01/VF02 the function: Release for Accounting is executed and no accounting document is created (OK cause they belong to the same company code), this function is just closing the cycle of the billing document to set the status as completed.
Case2.
Billing document containing several materials with more than one Profit Center
During the execution of the function: Release for accounting the following error is gotten: Position 1 is not populated with Profit Center - apparently caused by the splitting rule - financial document creation - the status of the billing document is not set to Completed, is kept as opened.
As I commented In case 1 I do not have any accounting document (no error message)
Doubt 1
Is it possible that the splitting rule is being checked even though no accounting document is created (remember billing in a scenario of material transfer between plants belonging to the same company code)?
Apparently in case 1 I do not have any error cause the splitting rule is deriving the profit center in a passive basis: Inheritance.
In the other way, in case 2 the splitting rule is trying to derive the profit center in an active basis. In my configuration I actually do not have any configuration for the combination of transaction, variant, position to be derived, position basis.
Doubt 2.
Is this the standard behavior of SAP?
Could this be caused by a user exit not identified?
thanks in advance for any advice provided
Regards vpa
Valentin PA.
2.
In case 1 is clear that as only one profit center is shown theoretically the inheritance rule is populating the ProfiIt would be possible, I suppose. You could generate Idocs from the SD system (or an interface file) and import that info into the FICA system. Of course the FICA system could not know about the sales order etc - so limited research abilities would exist.
For the second question, that would only function in a single system scenario, and yes the SD document flow would reflect its clearing status in FICA.
regards,
bill. -
Xml document transfer from JSP app to an ASP app
Hello,
The client has an existing Active Server Pages application. In-house we have built another application in JSP. We need to send an xml document that we are generating in Java Server Pages along with session login data to the existing ASP application.
In turn, the ASP application will use XSLT to render the xml on the web browser.
The JSP web interface consists of a final results screen which contains a hypertext link that links up to the existing ASP application. When a user clicks the hypertext link, the page gets redirected to the Index.asp.
Do you have any insight as to how I can transfer that xml document from the JSP application to the ASP application along with the session data?
Thanks for your time.Hello,
I am also interested in this... can you provide an example. Assume I know how to actually create the xml file (which isn't true yet... but I think I know where to go to find out)... what would the jsp (or servlet) code look like to include that xml file as a parameter.
Thanks
Eric- -
Document transfer from SRM to DMS through content server
Hi Everybody,
In one of scenarios we need to transfer documents attached to the shopping cart line items in SRM to R/3.
For that we followed the following procedure.
1.In the SRM to R/3 system, the attachments are driven by the BADIs.
2.In the BADI, if we define DMS_C1_ST as the storage category for R/3 Database, the DMS should work
3.The existing DMS, the customized content server is Z_DMS.
4.Using SRM (with Z_DMS)we are able to create the Document Info Record
5.The attachments are not reflected in DMS (driven through SRM)
6.When the attachments are added in the DMS manually, DMS works perfect
I am thinking there might be some configuration required in content server for the conversion of original application files.
If anybody have the solution for this please post here.
Thanks,
Rajesh.Hi
<b>Please refer to the links below -></b>
Re: Attachments in PR and PO
Re: Sending attachments from SRM to SAP Purchase Requisition
Re: Transfer SC attachment from srm 5.0 to backend R/3
Re: Attachments to backend
Re: Attachments in PR and PO
Re: URL vs. document attached in back end EBP 4.0 Classic/4.7 E
http://help.sap.com/saphelp_47x200/helpdata/en/41/648838ab4e8a11e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d6/806c39917d423ee10000000a11402f/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/9b/c2b9375e62545ce10000009b38f889/frameset.htm
Do let me know incase you still have any queries.
Regards
- Atul -
Pages documents -transfer to Mac or to Cloud or to email
Pages for IPAD -Can no longer email a document from Pages?. Also documents do not show up in ITunes, when connected to MAC, so I cannot transfer selected documents to MAC? Also I do not know how to Save document to Cloud from IPad Pages?
If you want to use iCloud with Pages go to Settings>Pages>Use iCloud>On. Of course, you have to be signed into iCloud as well in Settings>iCloud. Also Settings>iCloud>iCloud Drive>On>Page>On. If you do this, the document is saved automatically to iCloud.
To transfer files to the Mac, you use File Sharing. You have to Send the document to iTunes. It does not happen automatically when you sync the device.
iOS: About File Sharing - Apple Support
You you send a copy via email the same way. Tap the action Icon in the upper right corner and then select the format, after that you will get the Choose how to send window that you see above. -
Hi all,
The billing document information from CRM need to be posted into FI/CO module in R/3.
What configurations should I do for it or how is it transfered. Is there a middleware object.
Should I assign the publications "Billing Documents (MESG)" to the R/3 site to post the accounting information to R/3.
any inputs.. it would be of great help.
thanks
JothiHere is the answer, I am sharing as the help.sap.com does not have this info.
Need to assign the publication "Billing Documents (MESG)" to transfer Accounting information to R/3. -
ERLOS value 0 for subsequent billing documents transfer function
Greetings
I am trying to make use of KE4S Transfer SD billing documents to CO-PA function in my DEV environment. Our company recently started using CO-PA, so I would like to use this function to transfer FI docs over. The environment is 4.7 EN.
The problem is, when I run this function all of my ERLOS values are 0. Quantity and VPRS transfer over fine. But when I look at the actual COPA data at KE24, it shows ERLOS values as 0.
Any reason as to why these values would be zero? I have made the appropriate settings at KE4I so my SD condition type is linked to ERLOS.
I have tried deleting all the transaction data and re-executing KE4S, but the result is the same.
Any input would be appreciated.
Regards
Ken
Edited by: hanarin on Jan 25, 2009 11:20 PM. More detailsI guess ERLOS is intercompany revenue value field.
Check the following
1: KE4I condition type mapped to value field ERLOS
2: g/l account that is getting het must be created as cost element with category 11 or 12
Thanks,
Reddy -
SAP graphics to word document transfer
Hi.....
here is the problem whose answer i m seeking for.....
suppose i execute the graphics program NETZOCX2 and i have the o/p...the graphics is there ...
now i want to transfer that Graphics o/p intoa word document...is that possible by any chance....
Kind Regards,Prasenjit,
Check the reply of Kris in this thread
Re: Insert image in Word through ABAP
K.Kiran.
Maybe you are looking for
-
Apple macbook 13.3" replace speakers cost?
I need to replace the inbuilt speakers of my 13.3" macbook.It is out of warranty period. Can sum1 tell me how much shall I hav 2 pay for this???
-
F-03 Acct determ. 01001/ missing
I keep getting the same error when trying to clear a BS account. I have noticed that some of the postings in the account I am trying to clear have a dummy profit center. Can anyone help me with this problem? Thanks, Jennifer
-
Will 10.6 drivers work the same with the Lion Operating System (10.7) Mouse
Hi everyone i was hoping to know if 10.5 - 10.6 drivers work on 10.7 to use a mouse because i would really like the Razer Mamba and the 2012 edition has 10.5 - 10.6 drivers for it soo i was hoping that they would work with 10.7? Please respond quickl
-
MacBook Pro won't sleep or shutdown (intermittent problem)
Every so often my MacBook Pro won't sleep or shut down. I can't find any rhyme or reason to it. I notice the problem when I close lid, and it doesn't go to sleep. I then hit apple menu:sleep, and it does nothing. I hit shutdown, and OS shuts down, bu
-
Error saving document muse 2014.3
Object UID:U34268 has two (or more) owners: U27381 and U27239 Please help for a solution