Document type to be set blank in transaction code mr41,mrhr

Hi,
I want to set document type and currency field as blank whenever the user go for the transaction MR41 and MRHR. At present whenever user enter transaction MR and MRHR these two fields display some value which is there in memory id, i want to set these field as blank instead of getting the value from memory id. Please help me out if there is any solution.
Regards
karan

Hi,
Good morning and greetings,
Go to the transaction Code OBU1 and make the default Document Type for the transaction code MR41 and MRHR as Blank and the system will not propose the Default Document Type for the same...If you dont want the user to use a document type from History disable History in the SAP GUI options...Hope this meets your requirement.
Please reward points if found useful.
Thanking you
With kindest regards
Ramesh Padmanabhan

Similar Messages

Block Sales Document type for a set of customers

Hi,
I have to block the processing of particular sales document type, say XX or a scheduling agreement for a specific set of customers. Can anyone suggest me some inputs on this.
Thanks in advance
Suresh

Thanks all for quick response.
1. By blocking the sales document type by setting the block in VOV8 will not allow u to process that particular sales document type at all.. ie for all customers..But my problem is to block, say ZCAL for particular set of customers only..say customer 1234 of sales org 0001, customer 2132 of sales org 0001, customer 1315 of sales org 0002 etc..Apart from these setof customers, it should be able to process the document type for other customers.
2. By blocking the customer in VD05, it will block the customer for all sales operations. But i dont want to block the same customer for other sales document types.. Say, it should be blocked for ZCAL but not for all document types.
My requirement:
When we create an scheduling agreement, we give the sales area in the initial screen and enter. Then we give the Sold to party.Here it should check whether the customer entered is in the list of customers blocked for scheduling agreement. If so, it should pop up an error message stating" you cannot process scheduling agreement for customer X" If not, it should allow further processing.
I will try with the suggested User exit.
Please suggest if u have got any more ideas.
Thanks
Suresh

Visualization Type 'BSP Standard' not found in Transaction code : SWFVISU

I am trying to trigger a BSP through a workflow, i have searched the forum for the same.
It seems we have to do configuration in Transaction Code: SWFVISU
But i can't find the Visualization Type: BSP Standard in it.
SAP Version 4.7
Please suggest..
Regards,
Abhijit G. Borkar

Hi Martin,
There is a customizing step in spro transaction you have to do in order to do that...
go through:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration - > Scenario-Specific Settings -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management
and execute activity Define Mapping Rules for Copy Control.
Make sure that you've adapted the customizing to your newly defined transaction type "TSMC product
correction".
Best regards,
Stéphane.

Change document type within transaction ABSO

Hello Experts,
I am trying to change the standard document type AA to AF for the transaction ABSO. But unfortunately I am getting posted in AA which I don't want.
Current situation :
Created a new transaction type Z42 copying an existing transaction type 640 (Unplanned depreciation on prior year acquisitions). Then within the document type I have inserted AF as the default document type (screenshot attached).
To be :
Change the document type to AF.
Any suggestions are welcomed.
Thanks,

Hello Mukthar,
Thank you for your quick response.
Do you mean when I make a repeat run of AFAB or AFAR it will create a AF document ?
But then why is it showing the amount 0 on the movement type but on the unplanned depreciation field the correct amount ?
Is there something need to be done ?
Regards,
Sanjay

Document types per transaction

Hi Experts,
How to know which document types are determined per transaction?
Ex: what document type can be defaulted for the transactions like FB60 / FB65 etc.
Please indicate the config area.
warm regards
marias

Check the SPRO node under below path:
Financial Accounting (New)>Accounts Receivable and Accounts Payable>Business Transactions>Incoming Invoices/Credit Memos>Incoming Invoices/Credit Memos - Enjoy>Define Document Types for Enjoy Transaction
Regards
Sreenivas

Document type during Goods Receipt in Intercompany Transfer flow

Hi,
We create a PO, Delivery and GI in company A
We do a Goods Receipt in company B.
Can we customize that FI document type ZZ is used during Goods Receipt in company B?
Document type ZZ may only be used in the Intercompany flow.
Where can I customize this setting?
Thank you in advance,
Best regards,
Eric van Zundert.

Hi,
The following are the standard steps to create an accounting document type and assign it to a transaction.
1) In T-code OBF4, click on "Financial accounting document types" and create a new document type.
2)On the same T-code, Click on "Goods receipt document type" and assign the document type to the transaction.
3)On the same T-code, Click on "Financial accounting No range" and assign the number range for each document type based on company code and fiscal year.
Thanks and Regards,
Maheshwari

Enter Document Type during GL Account Clear at F-03

Hi All,
Because I would like to use a special document type when I perform this particular transaction. Thus would like tto change the "Document Type" set as default by the system at this T-Code F-03.
I would appreciate if someone can enlighten me where can I configure for the Document Type" Field to be displayed during Account Clear: F-03.
Many Thanks!

Hi People,
Thanks for your responses!
I have tried to go to OBU1. Strangely, I couldn't find the default document type for T-Code: F-03.
Thus I couldn't change the default document type.
Please advise. Thanks!

FI Number Range Number by Document Type -- different by company code

In transaction OBA7, I assign a number range number (T003-NUMKR) to each FI Document Type.
We have over 40 company codes on SAP. One of those 40 company codes requires sequential numbering of FI documents for the whole company code across all document types. The other company codes require different FI number ranges based upon document type.
I need to identify a solution where I can assign a different number range number by document type for different company codes.
For instance, company code IT01 should use a single number range number for all FI documents -- i.e. RV, SA, AB, etc. Then, all other company codes should use a different number range number for each document type.
Any ideas here? My problem company code is in Italy where our accountants tell us all FI Documents must be sequential, without gaps.

Hi Colin,
 The point is that it is about journals
 Sales Journal = Doc type RV
 Cash Sales Journal = Doc Type DR or have RV&DR use the same number range.
 For clearing you will have to create new doc types eg.
 AB = GL Clearing
 KB = Creditor clearing
 DB = Debitor clearing
The existing companies will also have to use these since these defaults are set in customising, but you have clearly defined Journals that comply with the requirements
It is probable that you will need additional doc types,to ensure compliance. In my case all creditor invoices used Doc type KR/KG (SAP Standard and they use the same number range), for the Italian company i then had:-
 KR/KG = Domestic Purchase Journal
 New Doc Type = EU Purchase Journal
 etc.
Kind regards

Mistake posting financial document using document type AA

HI,
The client post a journal entry document through FB01 but select document type AA (Asset transaction) and this financial document is posted as the document type AA.
Now, she run transaction ASKB but she keeps getting the error : "Internal error in item 0000000000: asset row is not complete"
and she cannot move on.
Is there any solution to this problem?
Thank you.

Verify that the incorrect financial document and its reversal document have the same offsetting entries. Also make sure you re-run any asset process that occur normally before ASKB gets ran.
Although I have never had this particular problem. I am seeing many posts that refer to this problem being related to asset reconciliation accounts. Meaning that the accounts used for periodic posting in ASKB cannot be set as reconciliaton accounts.
If you know the accounts used with ASKB, make sure they are not included in transaction OAMK. I think you can also display the GL account using FS00 and look at the control data tab to see if the reconciliation account indicator is set for "A" assets.
Perhaps the following thread will help..
Error while AFAB Run
The thread references notes 7595 and 859617

Document types - reg.,

Hi, gurus,
can anybody clarify the document types for P.R.,RFQ.,P.O.,contracts & scheduling aggrements.
thanks in advance
tulja singh

Hi,
We have different types of documents in purchasing as below -
RFQ/Quotation - (Transaction - OMEA)
PR (Transaction - OMEB)
PO (Transaction - OMEC)
Scheduling agreement (Transaction - OMED)
Contracts (Transaction - OMEF)
Each one of these will have seperate set of document types. list of the document types can be seen in the transaction specified above
BR
Diwakar
reward if useful

Logic in Creation of Document Types

Good Morning Folks-
Is there documentation on when to create a new document type? I am on an AR project and I have a client that has (in my opinion) duplicate document types. For example, they have 2 document types for incoming payments and they are different because cash comes via lockbox(FLB2) and the other comes from a wire. I have 4 document types to identify invoices and they are different because they come from the legacy system or created in SAP, etc. They have a document type for credit memos and typically I have seen it is the same as an invoice but differentiated by posting key. For credit memo, would be posting key 11.
I am trying to find some documentation that gives advice and warnings about this. I have worked with 9 US A/R projects and at most had to be concerned with was only 4 document types. I know what the definition of a document type is but they think it is to have them by source. I see warning flags here. I don't even know how to create clearing rules because it is so complex. In addition, they are unable to balance from their legacy system to SAP.
Points promised

Hi,
This looks to be a Business Process question or as per the requirements of the client. You can find documentation on document types and how to configure, but not on how many document types to be set up. This purely depends upon Business practice adopted by the client.
If a client has moved from a legacy system to SAP, the document types used in legacy system also influences this decision. There will be some reluctance to reduce or increase number of document types vis a vis legacy system.
There should be too many or too less number of document types. Basically, document types will be helpful for reporting and analytical decision making.
Thanks
Murali.

Creating new document types

Hi,
i've opened a call at SAP Support for following request and the support has relegate me to the forum/ solution managers:
For some, especially for one customer, is it very important to get new types of documents.
For example:
The credit memo. The credit memo makes an inventory entry.
The customer als needs an credit memo which doesn't make an inventory entry.
The seccond one for example is an notice of receipt: A customer of our customer send an item as a RMA. Our customer wants to make a kind of an notice, that this/ these item/s are arrived..
this one has to be take over in a bill of delivery when sendig the fixed item back to the customer
and so on....
It is important to make new document types in B1, set their own characteristics and their own possibility for take over in other documents...

Hi...
I've written down my suggestions here because the support can't help me farther.
The B1 Support told me that here are members of the Solution Management team in the Forum (View SAP Support Number 1028874 - Missing Functionality / Product Development Collaboration). But - none of my "wishes" have been answered.
Whats wrong here?
A simple thing like "Will come in the next Patch" or "Is not manageable" will be enough for me.
It's essential for our customers to get these functions or know when it will be implemented!
Thanks!

Multiple document types per Network in Purchase Requisition stage

Hi,
PRs get created automatically whenever we attach the material component to an activity.Required Document type of PRs are maintained in transaction 'OPTT'.
My Client is using three document types for Imports, Material Procurement & Services Procurement respectively & he wants all the three document types to be mapped in Project System implementation.(All other modules have been implemented long back & now IM&PS modules are being implemented)
In transaction OPTT, only one entry is possible to maintain as Document Type. Can anybody share how to maintain three Document Types?
Thanks
Kishore

Hi Kishore
Let me clarify one thing that Tcode:OPTT is to specify purchasing item categories(account assignment categories) and a purchasing document type for purchase requisitions in the network, this is not the area where u create new document type.
1) u can create new document types in the IMG>Material Management >Purchasing > Purchase requisition>define document types. where in u have define the new document type with the allowed categories and link purchase requisition with the document types.
2) U have to link this document type to the PO document type.
3) Then go to the OPTT transaction maintain the account assignment categories for the new document type created.
Reward points if useful
Regards
Murali

Re: Creating document types

Hello,
Can you post a snipet from the code that you are using?
Regards,
Shane
In article <R_ZIc.1560$[email protected]>,
[email protected] says...
> I've got a GW 5.x postoffice in a lab enviroment for testing. One thing I
> have to do is create some GW documents using the 5.x client. The client
> refuses, saying "invalid entry" for the document type (which is set to
> "Document", and says I have to pick a type from the list. But there is
> nothing in the list. How do I go about putting some entries in the list?
> Or is this some other problem?
>
>
>

Hi...
I've written down my suggestions here because the support can't help me farther.
The B1 Support told me that here are members of the Solution Management team in the Forum (View SAP Support Number 1028874 - Missing Functionality / Product Development Collaboration). But - none of my "wishes" have been answered.
Whats wrong here?
A simple thing like "Will come in the next Patch" or "Is not manageable" will be enough for me.
It's essential for our customers to get these functions or know when it will be implemented!
Thanks!

Document Types in CV03n Hiding EXIT or BAPI

Hi ,
I have some document types in customizing . But in Transaction CV01n I want to display only some document types in the F4 help .
Pleas let me know if there are some exits or some customizing can be done for the same .

Hi,
Take the search help and check if it has a search help exit and try to do modifications in it.
Thanks,
Venkatesh.

Document type to be set blank in transaction code mr41,mrhr

Similar Messages

Maybe you are looking for