Documentation link missing from front page?

Can it really be true that you have removed the link to the Oracle documentation from the front page?
I sure hope it's there and I just can't find it anymore - it would demonstrate a very limited knowledge of your users' needs if you on purpose remove the most useful single link from the front page...

Naturally, on IE with scripting enabled I can see menus and stuff, but that's not an option on my production system...

Similar Messages

  • Why is the link to my form getting this message?  I copied the link right from the page.  An error has occurred. The form does not exist. Please re-enter the web address as the link may be misspelled. [ref: cixTdh4JnkymYgz7awKoQ, BadRequest]

    Why is the link to my form getting this message?  I copied the link right from the page.  An error has occurred. The form does not exist. Please re-enter the web address as the link may be misspelled. [ref: cixTdh4JnkymYgz7awKoQ, BadRequest]

    My form - which was working great - disappeared when I did some editing; here is the message I get now.
    The form does not exist. Please re-enter the web address as the link may be misspelled.
    The link for the form is:
    https://adobeformscentral.com/?f=UqJr%2Aas2RJIHPVA4iGIQ6w
    Please look into the matter and resolve the issue at the earliest.
    Regards,
    Vaibhav Nigam

  • Artwork Missing from Front Row 2 with Shared iTunes

    From what I can see this is not solved in X.6.5
    This topic is closed:
    http://discussions.apple.com/thread.jspa?threadID=1195773&start=0&tstart=0
    I suggest to reopen one here. Cool if all affected users send the following message to Apple via the feedback form (http://www.apple.com/feedback/macosx.html):
    +Dear Apple dev team,+
    +I would like to know what is the status in resolving the original Bug ID# 3792802 "Artwork Missing from Front Row 2 with Shared iTunes".+
    +This issue has been around since Mac OS X.5.2, and is to my knowledge, still not resolved in X.6.5+
    +Thank you in advance for your answer.+
    Post your progress here. Thanks.

    This issue is still not solved in X.6.6,...
    By the way, no one has bothered answering to this topic. I'm saying sending feedback to Apple is a good idea, but that is the only way I could figure. Any other ideas from your side?
    Has anyone sent feedback to Apple? If not, please give their dev team some feedback about this issue.
    Thanks. Comments appreciated.

  • "Add Link" missing from Calendar after publishing sharepoint page

    The "Add Link" is missing from Calendar when I publish the page. While in the edit mode, I can see the "Add Link" option. I also made sure I have the right view mode set for the calendar. I am using SharePoint 2013.

    Hi,
    I assume you are adding calendar web part to a page.
    Please click somewhere in the Calendar web part and check if Events/Calendar tab appears, and try to add new event. If you highlight one box in the calendar, could you see the +Add as below:
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Working with existing website from Front Page

    ok, am giving up Front Page as I migrate totally to my Mac. How do I open pages on my site that is already up so I can make changes and apply themes??
    Thanks,
    Jim in Chicago

    Basically, you can't. If you want to transfer your site to iWeb, then you will have to re-build it totally in iWeb by copying and pasting from your existing site.
    iWeb has no import facility and FrontPage/Expression Web as it now is, is a PC only program just as iWeb is a Mac only program.

  • Documentation links missing in portal

    I'm opening this thread on behalf Tiina. Please kindly help her:
    We have updated documentation links in the portal. After the links have been added, they just disappear from the portal.
    Best regards,
    Márcio Leoni on behalf Tiina.

    Hi,
    you have to import some libraries (in your case it is com.sap.portal.navigation.api_service_api.jar).
    You can find it on the server installaton filesystem here:
    \usr\sap\EXX\JC0XX\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.navigation.api_service\lib\com.sap.portal.navigation.api_service_api.jar
    If you cannot find some classes to import I use this technique: I go to filesystem of the portal to the \usr\sap\EXX\JC0XX\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\ directory (using TotalCommander in my case) and let it search for desired class (in your case it is INavigationNode.class) - you have to set to search also archives (jar files are zipped classes). Now I copy this JAR to my local filesystem and add the library to the project.
    Romano

  • ADMINISTRATION tab missing from Home Page of Web Admin 10.1 .

    Hi All ,For one of our Users , the ADMINISTRATION tab is missing from the Home Page. They can only see tab for LIBRARY and DOCUMENTS.
    We have given the following roles to the user :
    /POA/BUI_FLEX_CLIENT
    /POA/BUI_UM_USER
    SAP_BPC_SERVICE
    ZM_BPC_END_USER
    ZBPC_A9L000001 (created automaticallly by BPC_CREATE_SINGLE_ROLE)
    ZBPC_A9T000001 (created automaticallly by BPC_CREATE_SINGLE_ROLE)
    ZBPC_A9U000001 (created automaticallly by BPC_CREATE_SINGLE_ROLE)
    ZBPC_SZL000001 (created automaticallly by BPC_CREATE_SINGLE_ROLE)
    ZBPC_SZT000001 (created automaticallly by BPC_CREATE_SINGLE_ROLE)
    ZBPC_SZU000001 (created automaticallly by BPC_CREATE_SINGLE_ROLE)
    Also while making local EPM Excel Connection , we are not able to see the MODEL corresponding to that Environment for  that given user.
    Are we missing any role.
    Thanks,
    SHUBHAM

    P.S.
    /POA/BUI_FLEX_CLIENT
    /POA/BUI_UM_USER
    These two roles are for accessing BPC, for administration , you need to assign admin task profile to user.
    And to access mode, you need to assign data access profile.
    Shrikant 

  • Dreamweaver from Front Page

    My web site is in front page and has not been updated recently because of that. I would like to convert to Dreamweaver. I understand all the inconsistencies with Front Page and realize I can't just do a import. I just want to have roughly the same thing in Dreamweaver; a simple page with navigation bars.
    I have been searching in vain trying to find how-to convert-material. For example, the Adobe site has an introduction page "Customizable starter designs for beginners" (probably what I need) but the link takes me to a non-Adobe site discussing CSS.
    So I am looking for some get up and go information for Front Page users to allow me to REBUILD the web site (with cut and paste of course) in Dreamweaver.
    Thanks,

    Hi Fred,
    In the time that the experts on the forum get back to you, have a look at a similar discussion where this topic has been discussed extensively.
    http://forums.adobe.com/thread/1297510
    Thanks,
    Preran

  • Insert Pictures from SharePoint option missing from Wiki Page

    Hi,
    I have a team site, which was migrated from SP 2010 to 2013.
    In the site pages, I have added a wiki page. In the ribbon - "Insert" - Picture - "From SharePoint" option is missing.
    I have checked various sites, which say publishing feature should be enabled. But in another site (also a team site i can see the "From Sharepoint" option available).
    How to get the "Insert" - Picture - "From SharePoint" option?
    Thanks

    Hi.
    Refer this link
    Here is a thread about it on msdn
    The essence from the thread:
    You'll need to activate SharePoint Server Publishing
    It is not available in enhanced rich text but it is in Publishing HTML. Change your column type to Publishing html and it will work
    http://sharepoint.stackexchange.com/questions/22815/how-to-enable-the-from-sharepoint-link-when-inserting-a-link-in-a-blog-post
    http://jopx.blogspot.in/2012/05/solve-disabled-insert-picture-from.html
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Vem download link missing from ucsm 2.1

    where is he download link for he cisco vem software? It used to be on 2.0 ucsm. but after upgrading, I no longer see that available on the ucsm page.

    Hi Tony,
    I checked the documentation, the link for VM-FEX has been removed from the UCSM 2.1 (onwards) as per design.
    You can now download it directly from the CCO link.
    It is published under the : Cisco UCS Management Partner Ecosystem  Software -> VM-FEX Module for vSphere
    http://software.cisco.com/download/release.html?mdfid=283850978&flowid=25021&softwareid=284192511&release=1.0%281%29&relind=AVAILABLE&rellifecycle=&reltype=latest
    Hope this helps!
    ./Abhinav

  • Content in documentation pane missing from Help panel

    I am using Flash MX 2004 on my Mac OS X 10.4.5. The content
    in the documentation pane (right pane) in the Help panel is
    missing. Can somebody help me?

    You might have deleted the opera 6.0 directory in
    /Applications/Macromedia Flash MX, which it uses to display the
    xml-based help content.
    If you have a copy of Dreamweaver MX, then copy 'opera 6.0'
    from /Applications/Macromedia Dreamweaver MX 2004 to your Flash
    Directory. If that doesn't work you may be missing the content from
    /Users/Shared/Library/Application Support/Macromedia/Flash MX
    2004/en/Configuration/HelpPanel/
    and will have to re-install the stuff.

  • Links missing from printed version

    Using RH7 on a help text originally created in RH5, my
    printed documentation has no links at all-- not even non-working
    links. The link text comes through as plain text. While the printed
    documentation is being generated I repeatedly get a message from
    Microsoft Word, saying "Word cannot save this file because it is
    already opened elsewhere (C:Documents and Settings\...\Normal.dot)"
    This message makes me think the link problem is related to
    templates. When I open the resulting document and look under Tools
    > Templates and Add-ins, it shows these templates:
    - In the "Document Template" box, C:\Documents and
    Settings\ccbrewst\My Documents\I-GUIDES help\IGUIDES_RHT.dot
    - In the "Checked items" box, rhd.dot and SnagIt Add-in.dot
    It doesn't mention Normal.dot. Can anyone tell me if the link
    problem is related to templates, and why I get the message about
    Normal.dot? (I think I'm over my head!) Thanks.

    I wish this forum would let me edit my previous submission. I
    wasn't getting links because I hadn't checked the "Retain
    Hyperlinks" box. Duh! I didn't know that choice existed. But I'm
    still getting the message about Normal.dot, so I'd still like to
    know about the template issue. Thanks.

  • After installing ios8 my iCloud setting is stuck in the upgrading mode, and some documents are missing from my pages app.

    After installing the IOS8 on my ipad2, the iCloud drive is stuck in the upgrading mide.  I am also missing some documents that were in my Pages app.  Can anyone help my fix this issue?

    I have just encountered a similar issue and I think it might have been the same as one you are getting. Turns out, I accidentally switched from my local store to US Store (App Store gives you a pop-up offering that), and purchases are tracked separately between those, causing all your purchases to become invisible.
    Go to Settings, log out of App Store, log in again, and you should receive a pop-up saying that your account is associated with a different store, offering to switch back. Now all apps are back and available for download.

  • How do I recover a purchased app that is now missing from home page?

    Had not synced iPod to computer since app purchase, so app did not show up in iTunes library on computer. Since I purchased this app (but the icon perhaps was deleted) how do I get it back?  Surely the purchase is documented and there is a way to recover the app.  I've tried everything!

    How to redownload purchased apps from the App Store

  • Oracle 10g (10.1.0.2) for Linux x86 missing from download page?

    Hello,
    Why isn't there a download link to Oracle 10g (10.1.0.2) for Linux x86 on the 10g download page?
    And what's the difference between 10.1.0.3 and 10.1.0.2?
    Thanks

    Hi,<br></br>
    <br>The level of one release is different with plateform.
    On the Oracle Database 10g Downloads you can find only final release, and not intermediare patch.</br><br>For example, the 10gR1 for Linux x86 is 10.1.0.3, and for Windows 32-bits this is 10.1.0.2, after what you can upgrade to the last patchset.
    </br>
    <br>Nicolas.</br>

Maybe you are looking for