Documentation of cisco::eem and cisco::lib libs

Hello Experts,
Would you be able to help me find the link to complete documentation of cisco:eem / cisco::libs libraries ?
Thank you.

Some of the available functions are documented on Cisco.com in the EEM Tcl guide (e.g., the CLI functions and the mail functions). Some of the others I mention at https://supportforums.cisco.com/docs/DOC-12757#Tcl_Packages . Between the two sources, I think you'll find everything you're looking for.

Similar Messages

Multiple PC's and Itune libs, how do I move a playlist from one lib to Iphone if phone not sync'd with that lib / pc?

Multiple PC's and Itune libs, how do I move a playlist from one lib to Iphone if phone not sync'd with that lib / pc?

La121485 wrote:
how do I move a playlist from one lib to Iphone if phone not sync'd with that lib / pc?
You create the playlist on the other computer which may require moving or copying of the media from the first computer to the second computer.

[SOLVED]gcc-libs and gcc-libs-multilib are in conflict

Can't update today.
[glow@GlowArch ~]$ sudo pacman -Syuv
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
catalyst is up to date
:: Starting full system upgrade...
warning: android-udev: local (98-1) is newer than community (r100-1)
resolving dependencies...
looking for inter-conflicts...
:: gcc-libs and gcc-libs-multilib are in conflict. Remove gcc-libs-multilib? [y/N] n
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: gcc-libs and gcc-libs-multilib are in conflict
I assume there is some update going on, i will try again in some time.
Last edited by GloW_on_dub (2014-05-09 14:04:57)

[glow@GlowArch ~]$ sudo pacman -Syu --ignore gcc-libs
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
catalyst is up to date
:: Starting full system upgrade...
warning: android-udev: local (98-1) is newer than community (r100-1)
resolving dependencies...
warning: ignoring package gcc-libs-4.9.0-2
warning: cannot resolve "gcc-libs=4.9.0-2", a dependency of "gcc"
warning: cannot resolve "gcc=4.9.0-2", a dependency of "gcc-fortran"
:: The following package cannot be upgraded due to unresolvable dependencies:
gcc-fortran
:: Do you want to skip the above package for this upgrade? [y/N] n
error: failed to prepare transaction (unexpected error)
You're right, i have indeed a dependency problem because of this aur package, acml-gfortran, wich have in it's dependencies gcc-fortran instead of gcc-fortran-multilib
The thing i don't understand is how have i been able to install gcc-fortran with acml-gfortran, without trying to install gcc-libs and discovering the conflict at that time,
and also why the fact that there is a gcc-fortran and gcc-libs update without the corresponding update in the multilib version discover the conflict.
I've commented the aur package, so the maintainer will soon fix the problem, yet i don't understand fully why this conflict have appeared now.

Rebuilding gcc and gcc-libs for i586

Hi. A quick question, if you don't mind. I'm trying to rebuild (or should I say update?) just about everything on an i586, but I'm a little stuck between gcc and gcc-libs.
This is from the PKGBUILD for gcc-libs ...
makedepends=('binutils>=2.18-3' 'gcc>=4.2.2')
And this is from the PKGBUILD for gcc ...
depends=('binutils>=2.18-3' "gcc-libs>=${pkgver}")
where $(pkgver) is the same as the gcc version, or 4.2.2. So on the surface it appears I can't compile either one since each one seems to be a dependency for the other (and makepkg spits out an error to that effect, for both, when I try).
Is there a graceful or correct way to rebuild both packages? Is there another package I'm overlooking that will handle both of them?
As you can imagine, I'd like to do this correctly the first time, since the trial-and-error method involves hours off my life.
Cheers and thanks in advance.
Last edited by k.mandla (2007-12-18 00:21:50)

makepkg will halt without a -d flag, and the build process snags and stops with -d.
The gcc version is 4.1.1. I started with an installation of Lowarch, hoping that I could hopscotch my way up to a current system. It's gone well so far, but this part is turning prickly.
I compiled both packages for i586, plus glibc-2.7 and binutils-2.18, overnight on my "fast" machine (1Ghz ... ), so later today I'll see if copying them across and installing en masse helps at all. Judging from the wiki pages, it should help.
Thanks for the tips, by the way. Compiling is not my favorite thing, but I'm learning a lot.
Last edited by k.mandla (2007-12-19 23:31:17)

Difference between name.lib and nameD.lib

What's the difference between xxxx.lib files and xxxxD.lib files?

The xxxD.lib are debug libraries. When you build an application in debug mode, the application is built with the xxxD.lib library. When you build an application in release mode, the application is built with the xxx.lib library.
- Elton

I don't want all those GNOME and KDE libs on my system!

Kde Libraries/Base/Bindings - 80 megs
Full KDE - 200 megs
Full GNOME - 80 megs
Base Gnome - 55 megs
I hear so many people saying "Ew, it's using gnome-libs I don't wanna install that" I have said this many times. It's seemed like a lot of usage on my hard drive with all those packages... In reality, 50 megs for GNOME libs or 80 megs for KDE isn't a lot at all.. Heck, UT2004 is around 90 times bigger than installing base KDE and GNOME libs. Thanks to modern technology, most PCs have 80 - 120 gigs on them.. Even with this 30 gig hard drive, 150 megs does not even put a dent. Unless your using a floppy for your hard drive, it won't hurt to install gnome and kde libaries. You need a gig and a half for just winblows stuff! Just because it says:
Targets: hal-0.2.97-2 libgsf-1.9.1-1 gnome-desktop-2.8.0-1 nautilus-2.8.1-1
nautilus-cd-burner-2.8.1-1 libdvdcss-1.2.8-1 libdvdread-0.9.4-2
libdvdnav-0.1.9-2 faac-1.24-1 faad2-2.0-5 hermes-1.3.3-1
libmikmod-3.1.11-1 gtk-1.2.10-4 mjpegtools-1.6.2-1 gst-plugins-0.8.5-1
totem-0.99.19-2
Total Package Size: 11.5 MB
Proceed with upgrade? [Y/n]
It seems like a lot of depedencies, being on four lines and all... But it's really not that much. I won't hurt to have it on your PC.
Just my .2 for the day

xerxes2 wrote:
kth5 wrote:hmm, i have exactly the same scenario on my laptop. it's only a Celeron 700 + 256MB ram. i run kde, mozilla thunderbird, several konsole session, xchat2, xmms plus some more konqueror session w/o any problem. only thing that is lagging behind is my GFX card which needs a share of the system memory. anway, my system in KDE w/ all these apps up needs only ~120MB the rest is filled up w/ diskcache or whatever. it's not bad for a desktop system that is not supposed to render 3D or viewing 100MB+ large files from memory.
I'm impressed!
I havn't tried kde since 3.2.0 and it was totally unusuable due to bugs, crashes, bloat and so forth,
the kde devs must been busy since then...
I was even quite impressed with KDE 3.3.x. I use KDM for my default DM all the time.. GDM is too buggy.. WDM/XDM too ugly... I actually made KDM look pretty sexy.. People say you can't, but it's not that hard... I'll make some screenies if anyone want some

Gdi32.Lib, User32.Lib and jawt.lib Files

I want to run this command:
cl -Ic:\Program Files\j2sdk_nb\j2sdk1.4.2\include -Ic:\Program Files\j2sdk_nb\j2sdk1.4.2\include\win32 -LD HelloWorldImp.c -FeHelloWorld.dll c:\Program Files\j2sdk_nb\j2sdk1.4.2\lib\jawt.lib c:\Program Files\j2sdk_nb\j2sdk1.4.2\lib\User32.Lib c:\Program Files\j2sdk_nb\j2sdk1.4.2\lib\Gdi32.Lib
I have j2sdk_nb\j2sdk1.4.2\lib and it does not have gdi32.lib, user32.lib and jawt.lib files. I want you to send me these files. You can send this address. [email protected]
thank you
Abdurrahim Kaplan

user32.lib, gdi32.lib are libraries that you can get in the Microsoft Visual C++ compiler installation. (I believe that you're using the full Microsoft Visual Studio package, not the free package that you can download with the Platform SDK and that does not include the optimizing compiler). If your LIB environment variable was correctly set by the vcvars32.bat batch file, the compiler will find the user32.lib and gdi32.lib files.
Simply mention "user32.lib" instead of using the full path, and "cl" (the Microsoft Visual C++ compiler driver) will find automatically the correct library.
jawt.lib is already present in your J2DK installation in the LIB directory. The following files can be found in the LIB directory:
dt.jar
htmlconverter.jar
ir.idl
jawt.lib
jvm.lib
orb.idl
tools.jar

Gdi32.lib and user32.lib files

I want to run this code :
"c:\Program Files\Dev-Cpp\bin"\cl -Ic:\Program Files\j2sdk_nb\j2sdk1.4.2\include -Ic:\Program Files\j2sdk_nb\j2sdk1.4.2\include\win32 -LD HelloWorldImp.c -Fehello.dll c:\Program Files\j2sdk_nb\j2sdk1.4.2\lib\jawt.lib c:\Program Files\j2sdk_nb\j2sdk1.4.2\lib\User32.Lib c:\Program Files\j2sdk_nb\j2sdk1.4.2\lib\Gdi32.Lib
where can I find and download gdi32.lib and user32.lib files??
please help me and you can communicate with me by this e-mail address : [email protected]
thanks ABDURRAHİM KAPLAN

What are you trying to accomplish? Your various questions are a little confusing.
> please help me and you can communicate with me by this e-mail address : [email protected]
Sorry: http://www.catb.org/~esr/faqs/smart-questions.html#noprivate
-slj-

Libtux2.lib and libgp.lib

I am evaluating Tuxedo 8.1 and trying to complile an application that already runs
Tuxedo 6.4, but it couldn't find libtux2.lib and libgp.lib during the link process
as needed. I would like to know how can I build this application with version
8.1 and why those two libraries doesn't exist anymore.
Thanks in advance.

Hi Wayne,
I have just solved the problem. My application is built and is running!!!
I have just replaced those two libraries by that one you mentioned(libengine.lib).
Thanks for your help
"Wayne W. Scott" <[email protected]> wrote:
HI Mauricio:
How are you compiling? If you use Tuxedo's buildserver and buildclient,
they should
generate the correct linker input. Are you using makefiles with your
own CL lines?
Wayne
Mauricio wrote:
Hi Wayne,
I am running Windows 2000 Server. I am poiting the directories to theproper %TUXDIR%/lib
directory, also the compiler(MS-Visual C++ 6.0) directory settingsare properly
ser. What would help, is that if I could have the information of whichlibraries
today contain the functions that were on those old libraries.
Thanks,
"Wayne W. Scott" <[email protected]> wrote:
A lot of upgrades and reengineering was done in between those releases.
Some libraries
have been combined and renamed -- for example, libengine is a new one.
Please check the
sample builds in the examples that come with Tuxedo to see what they
do.
Also, be sure you start with a clean build so you don't have old binaries
hanging around
that make calls to functions in the old libraries.
What platform are you on? Did you reset environment variables to point
to the new
directories?
/wws
Mauricio wrote:
I am evaluating Tuxedo 8.1 and trying to complile an application thatalready runs
Tuxedo 6.4, but it couldn't find libtux2.lib and libgp.lib during
the
link process
as needed. I would like to know how can I build this application withversion
8.1 and why those two libraries doesn't exist anymore.
Thanks in advance.

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

How to create documentation for report programs and how to use it

how to create documentation for report programs and how to use it in the selection screen by placing an icon in the Applicatin Tool bar. If i click this icon the help documentation has to display.
Note: Exaple RSTXSCRP programs selection screen

Hi
1 goto SE38 transaction, give the program name
2 Click on documentation radiobutton & then press change
3 Write your PURPOSE, PREREQUISITES etc details
4 Save the same & Activae it.
The icon will come automatically on selection screen
Thanks
Sandeep
Reward if useful

Is there any documentation on 0PA_MP01 (Headcount and Personnel Actions)

Have not been able to find documentation on multiprovider 0PA_MP01 and its related queries, any idea where to find?
Cheers.
Tan Meng Mau.

Well....the note just states that it is a new multiprovider but with no details. What we are looking for is something similar to the documentation for the BI Content that SAP provides.
E.g.
http://help.sap.com/saphelp_nw70/helpdata/en/63/351e3c6a2fc036e10000000a114084/frameset.htm
Tan Meng Mau

Standard Documentation for Add-on and Add-on's Data Base?

Hi!
I'd like to know if there is a stantard to create documentation for Add-On and Add-On's Data Base to get the Add-On's Certification.
Thanks!
William

> When applying add-on images to our base the primary MSI's install just
> fine but none of the MST's and MSP's do not apply.
I meant to say that none of the MST's and MSP's apply. Sorry about that.

Documentation about Screen, Menu and Field Exits

Hi all!!
I need some documentation about Screen, Menu and Field Exits.
I´m very interested specially on steps by steps.
My mail is [email protected]
Helpful posts will be rewarded.
Thanks in advance and regards,
Manuel.

Types of Exits 
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits 
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
 CASE okcode.
 WHEN 'BACK OR EXIT'.
 CASE sy-dynnr.
 WHEN '100'.
 SET SCREEN 0.
 LEAVE SCREEN.
 WHEN '200'.
**** Note that you can write any code that satisfy your needs. ****
**** But in this case, this was wrote as a sample code for reference sake. ****
**** And you can test it. ****
 SET SCREEN 100.
 LEAVE SCREEN.
 ENDCASE.
 ENDCASE.
reward points if it is usefull..
Girish

Documentation on table, view and procedures of the user portal

Where can I find documentation on table, view and procedures of the portal user?
Thanks.

PL/SQL API doc here :
http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/summary.html
VIEWS doc here :
http://download-uk.oracle.com/docs/cd/B14099_19/portal.1014/b14135/pdg_cm_api.htm#CHDIFAGE

Documentation of cisco::eem and cisco::lib libs

Similar Messages

Maybe you are looking for