"Documents & Data" no longer working as expected

I've been using the "Documents & Data" feature in iCloud to great satisfaction - until now. After upgrading to OS X 10.10 and IO8.1, I'm not so happy anymore. It looks like a bug to me, but would like others to comment on it.
First of all iCloud Drive is not enabled and is not an option for the time being due to lack of support in iPhoto 9.6.
As stated I use "Documents & Data" to share documents between by Mac and 2 iPads. And it's been working fine until the upgrade.
If I create a new spreadsheet on one iPad it's available on the other, but not on the Mac.
When I enter System Preferences/iCloud and select "Manage..." and then "Numbers" the spreadsheet created on the iPad is listed, but is not available when I do a File/Open in Numbers on the Mac.
Comments please.
PS If I create a new spreadsheet on the Mac and save it in iCloud, it's only available for the Mac, not the iPads.

By browsing through several Apple "forums" I found that: If you've decided NOT to upgrade to iCloud Drive you can still share documents between IOS8 devices but NOT with MACs running OS X Yosemite. So I guess it's "working as designed", but if I may add: "Bad designed".

Similar Messages

Search for User by last logon date no longer works after upgrading to SPS18

We used to be able to Search by last logon date under User Administration as a quick way to find out who logged on for a particular date. It worked well, but only for a single date range. We were on EP 6.0 SPS13 at the time. Since we have upgraded to SPS18, it no longer works. All we get back now is no user found no matter what date we enter.
Has anyone else experienced this problem? I've been searching and haven't found anything. I wanted to try and get more information before I create an OSS message.
Thank you,
Kathy

it's since SP16, to be correct: http://help.sap.com/saphelp_nw04/helpdata/en/43/bc6b9202454dece10000000a422035/frameset.htm
kr, achim

KM document iViews no longer work after upgrade to SP18

We just upgraded to EP 7.0 SP18 from 7.0 SP14. After the upgrade, our KM Document iViews no longer show the content within a page. They look corrent when you preview the iView.
Before you ask, we have already installed [SAP Note 1319278|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_ep_pi/~form/handler], by loading the 2 attached PAR files (com.sap.portal.epcf.loader.par and com.sap.portal.navigation.contentarea.par). This did not change anything. Does anyone know if there are additional steps that need to be taken with installing this note? The note mentions SAP NetWeaver 7.00 SP18 Patch 3, but we can not find that in download area. Or it there another issue?
Thank you ahead of time,
Andrew

Hi,
Please have a look with this note,It is working in my scenario.
972514 : Empty BEx Web Analyzer instead of BEx Broadcaster
Kapil Rana

Data no longer working in 1.3.1 with vodafone / GSM / O2(DE)

Tried finding a similar thread on the forums, couldn't find one, so I'll start a new one. This issue has been discussed to some lengths on the PreCentral forums, but no solution has yet been found.
I'm using an unlocked German Pre in the Netherlands, with a (non-business) vodafone NL account. On 1.1.3 I was able to activate the phone using the metadoctor and enable 3G by changing the APN in the CarrierSettings database (as it has only the business vodafone one there). I had a properly working Pre.
When 1.3.1 came out, I applied the update and since,I haven't been able to get a working 3G connection. Neither the old way of modifying the CarrierSettings file, or using the new setting for manual APN settings works. I've enabled some debugging, and it seems during IPCP negotiations, the ConfReq id=0x1are never replied to by vodafone.
This is my first Palm, and was really happy with it, and whilst I *am* aware I'm using the phone not quite as yet intended, I still do think this is a serious issue. Is there anyone here or @Palm who might have a clue what is going wrong? I am willing and able to modify/replace any of the relevant files and add/provide any logging required.
Help! Please :-)
   Herman
Post relates to: Pre p100ueu (O2)

Hi, Ozuzo.
I'm suffering the same problem here. Like you, I've bought an unlocked German Pre that I'm using in Vodafone Spain. I bought the phone at http://www.expansys.es, where they say the phone comes unlocked from factory, so I think it should be under support. Since 12/26 (at least), Ithe 3G connection is not working well. The phone is disconnected most of the time, but the signal comes from time to time.
I have entered the phone through novaterm, and I have found something interesting:
root@palm-webos-device:/var/log# ls -al
-rw-r--r-- 1 root root 113 Sep 10 20:17 modeminfo
-rw-r--r-- 1 root root 3408 Nov 23 20:35 modemupdater.log
-rw-r--r-- 1 root root 301098 Dec 28 08:53 omadm.log
root@palm-webos-device:/var/log# cat modemupdater.log
$ Modem is powered-on
Warning! Please make sure you have a healthy battery or using a power supply before you do your update
Warning! You can potentially trashed your modem firmware if system lost the power in the middle of updating firmware
Warning! To Stop it now, ctrl+c
PmModemUpdater Version 5.2.0.7 Aug. 2009 @Palm Inc
$ Creating temp file
$ Disable handshaking in ROM
$ Resetting the modem before flashing.....
090807060504030201
$ Probing modem.............
* Modem Firmware Info *
* COMP DATE = Sep 02 200917:30:0509/02/2009
* REL DATE = 09/02/2009
* HW VERSION = 100D00E1
* MOB MODEL = BA
* RADIO TYPE = UMTS
* DEVICE TYPE = CASTLE
* EX BUILD ID = CU0.5.13(127)
$ Finished detecting Modem!
$ Reconnecting to modem.......
$ Host is re-enumerating the USB......0807060504030201
$ Waiting for USB port to settle down.....
$ Trying to communicate with the modem in DOWNLOAD mode......
* UMTS Modem Infomation *
$ Current OEMSBL = U0.5.13(127)
$ Error in Reading.Received buffer(length =11) is not expected data(length=4)...
  8 6 1 10 0 ba 0 0 51 bf 7e 0**************************************************
$ Start flashing the modem......................
$ Flashing ARMPRG in Progress ...... Done!
$ Waiting for USB port to settle down.....
$ Error in Reading.Received buffer length is 0
$ Comparing partitions ......
$ ****************************************************************
$ ***** BOOTLOADER FLASHING IN PROGRESS! DO NOT LOSE POWER! *****
$ Flashing Bootloader1 Progress ...... Done!
$ Error in Reading.Received buffer length is 0
$ Flashing Bootloader2 Progress ...... Done!
$ Error in Reading.Received buffer length is 0
$ Flashing Bootloader3 Progress ...... Done!
$ Error in Reading.Received buffer length is 0
$ ***** BOOTLOADER FLASHING DONE! *****
$ Flashing AMSS Progress ...... Done!
$ Error in Reading.Received buffer length is 0
$ Flashing done!Please wait while resetting the modem..... 0807060504030201
$ Firmware Flashing Time: 3 Minutes: 4 Seconds
$ Host is re-enumerating the USB......0807060504030201
$ Waiting for USB port to settle down.....
$ Probing modem.............
* Modem Firmware Info *
* COMP DATE = Oct 02 200914:37:1110/02/2009
* REL DATE = 10/02/2009
* HW VERSION = 100D00E1
* MOB MODEL = BA
* RADIO TYPE = UMTS
* DEVICE TYPE = CASTLE
* EX BUILD ID = CU0.5.18(132)
$ Finished detecting Modem!
$ Restore the NV items to the modem ...............
$ Restoring NV item :
=== Restore 101 NV Items Completely ===
$ Writing PALM Standard NV Items completed!
$ NV restore Success!
$ Enable handshaking in ROM Enable handshaking in ROM
$ Your device is ready for use.
root@palm-webos-device:/var/log# dmesg
cdc_acm 1-1:1.0: set control lines: dtr- rts-
cdc_acm 1-1:1.0: set control lines: dtr+ rts+
cdc_acm 1-1:1.0: set control lines: dtr- rts+
cdc_acm 1-1:1.0: set control lines: dtr+ rts+
cdc_acm 1-1:1.0: set control lines: dtr- rts+
cdc_acm 1-1:1.0: connection speed change: 262144 bps up, 0 bps down
cdc_acm 1-1:1.0: connection speed change: 262144 bps up, 262144 bps down
cdc_acm 1-1:1.0: set control lines: dtr+ rts+
acm_tty_close:
cdc_acm 1-1:1.0: set control lines: dtr- rts-
cdc_acm 1-1:1.0: set control lines: dtr+ rts+
cdc_acm 1-1:1.0: set control lines: dtr- rts+
cdc_acm 1-1:1.0: set control lines: dtr+ rts+
cdc_acm 1-1:1.0: connection speed change: 262144 bps up, 0 bps down
cdc_acm 1-1:1.0: connection speed change: 262144 bps up, 262144 bps down
The 3G connection is lost when the 0 bps down messages appear.
I think this firmware update is the culprit of the bad behaivoir, but it would be nice to confirm it with someone from Palm.
Regards.

MAX function to get recent date doesn't work as expected

Hi,
I recently started working on Oracle and came across this problem. I coded below given query to get the latest date from table and compare it with Sysdate + 1 timestamp. I am not able to understand what I coded wrong but the query gives me wrong results as explained below :
select NVL(MAX(to_char(max(last_update),'mm/dd/yyyy hh12:mi:ss AM')), to_char(sysdate + 1,'mm/dd/yyyy')||' 12:00:00 AM')
from Audit_Table_Name
where col1 = 'AA'
and location_type = 'STATE'
and original_flag = 'Y'
group by col1,location_type,original_flag;
Here Max(last_update) from Audit Table Contains value --> 08/25/2009 12:00:00 AM
Note : Data type of last_update is Date
so ideally speaking it should give 08/26/2009 12:00:00 AM but surprisingly it is giving 08/25/2009 12:00:00 AM as output. Anyone can explain why this is happening and what we need to do to get correct results?
Regards,
Amol

1) Why would you expect this to return a date of 8/26? NVL returns the first parameter unless it is NULL. If the first parameter is NULL, it returns the second parameter. Since
MAX(to_char(max(last_update),'mm/dd/yyyy hh12:mi:ss AM'))returns a non-NULL value, that value will be returned. Oracle never needs to evaluate the second parameter
to_char(sysdate + 1,'mm/dd/yyyy')||' 12:00:00 AM'You state that you want to compare the MAX( last_update ) to SYSDATE + 1. Your code isn't doing a comparison now. And it's not clear from your description what comparison you actually want to do. Can you elaborate a bit on what you want to compare and what the output should be depending on the result of that comparison?
2) You almost certainly want to do as much of the logic as possible using dates and only convert to a string at the very end. Otherwise, you risk comparing two strings that represent dates using string comparison semantics and getting a result you don't expect.
3) My guess (and it is just a guess) is that you want something like
SELECT GREATEST( max(last_update), trunc(sysdate+1) )or
SELECT TO_CHAR( GREATEST( max(last_update), trunc(sysdate+1) ), 'mm/dd/yyyy hh12:mi:ss AM' )Justin

Data Tracking not working as expected

Hi,
I have created a report on a universe which is based on a BEx Query. When I run the WebI report in InfoView saved data shown, I then select tracking and select the current data (fixed) as the reference data. I then enter a key date for the data (which effively looks at data at a point in time) and the data changes but the changes are not marked. However, the reference date at the bottom of infoview is the saved data date.
I then refresh the data again and change the key date to a different date and changes are shown based on the data which I refreshed in the report NOT the saved data. I have had a look at the bottom of infoview and the data tracking reference date changed to the REFRESHED data. I then refreshed it again and the reference date remains as the refreshed data.
Just to re-confirm I did select use Fixed reference data.
Any ideas why I am having this problem?
Thanks

Hi,
The key date is in the SAP BW BEx Query which the universe is created on. The WebI report is then created on that universe. The key date changes the data.
I have just tried loading the data into SAP BW so that the data changes. I then went to the WebI report which is showing the old data and has tracking on by default when the report was created. the fixed data date at the bottom says the old date. I then refresh the new data is shown and the fixed data date changes....tracking is still not working as we expect.
Any ideas
Thanks

ExportPDF document conversion no longer works for me...why?

I am currently subscribed to ExportPDF and have been since around March of last year or earlier. However, since last April, I have not been able to convert any exported PDF files. I've tried numerous times to upload PDF documents for conversion, but continue to get the error message "conversion failure - The file has not been processed.
An error has occurred which stopped the processing of the PDF. "
What has changed? Initially, I had no problems uploading files and I was quite happy with the service. Now, I am getting ready to cancel request a credit for previously paid subscription fees. I would prefer the keep and use the service, as it is a valuable tool that could assist with my job functions. However, if it doesn't work, I'm only wasting time and money and now I'm frustrated enough to cancel.
Would love to have someone clear this matter up instead of having to cancel...

Hi rosshann,
Let's gather a few details about your system so we can figure out where things are falling apart. The following information would be very helpful in determining the problem:
Whether you're signing in via Reader or the ExportPDF website
What browser you're using
What version of Reader you have (choose Help > Check for Updates to get the most recent version)
How large are the files that you're trying to convert (file size, as well as number of pages)
Whether you're using Mac OS or Windows
Some basic troubleshooting to start with is clearing the browser cache, making sure that you're using a supported web browser (System requirements | Acrobat.com), and making sure that there are no firewall or proxy settings that are limiting your access to the Internet.
Best,
Sara

Ping no longer works as expected - anyone else finding the same?

I no longer seem to be able to like a song and Ping it - tried reconnecting with my Twitter account and now get an error message. Using OS X 10.6.8 and iTunes 10.3.1

I no longer seem to be able to like a song and Ping it - tried reconnecting with my Twitter account and now get an error message. Using OS X 10.6.8 and iTunes 10.3.1

PXE boot no longer working - blank cmd windows shown. If run Scripts/Litetouch file from target machine wizards runs as expected??

Hi, My MDT server no longer works as expected via PXE boot. After the target machine loads the .wim file an empty command windows is shown. I have returned the custom settings.ini and bootstrap files to default and ensured nothing is being skipped within
the task sequence within both files in hope of viewing the wizard.
However from the same target machine if I map drive to my Deploymentshare/Scripts directory and run LiteTouch file I am asked for domain credentials and the Deployment wizard is displayed asking for task sequence to be selected.
I believe this error is a result of two things:
1) I applied some windows updates to my mdt server (running on 2008 r2).
2) I was implementing changes to
ZTIWindowsUpdate.wsf which i have now returned to default settings.
I have also regenerated boot images and re added to WDS.
Any help much appreciated?
Regards,
Paul

Hi Paul,
This sounds familiar; I only encounter this behaviour with certain kinds of laptops (Latitude E65x0) but I usually just provide the "wpeutil reboot" command in the empty command window to keep things going. All other hardware is deployed with the
same task sequence and this behaviour does not occur anywhere else...
A bit obvious maybe, but did you check if there is still a "Next Phase" step present and enabled following directly after the "Install Operating System" step?

New animations that are made responsive within edge no longer working in squarespace

i have posted numerous edge files to squarespace in the past with no problems. recently though, for whatever reason, animations that have been made responsive in edge no longer work as expected and require some hacky workarounds in order to display properly. when you inspect the code for the page, the .js files and all the css and images are included as per usual, but the animation never starts. when i include some text in the #Stage div the text will appear on the page for a fraction of a second (styled as it should with our web font and size, etc.), then the styles are stripped, then the text will vanish. all of this happens in less than a second.
this made me think it's some sort of .js or .css file that gets loaded in after the animation that's causing it to not work properly, but i can't figure out what it might be.
i was just curious if anyone else was having these problems, and might know of a solution. my old edge files that are still on ss are working fine. if i take old edge files and create a new article they still work. it is only newly saved edge files that are made responsive that no longer work correctly. edge animations that don't include responsive aspects work as expected.
i'm not sure if this is an edge or a squarespace problem, but i figured i'd ask here as well.
thanks for any help!

Oskar,
I appreciate your help on this. I am getting different results. First, I am getting some additional problems that I've never had with earlier versions of Excel (as I said, I'm running Excel 2013 now).
I have a workbook with several worksheets. With one of the sheets, any attempt to print or print preview fails. I do File > Print, and I see that the selected printer is my HP LaserJet M2727. This is the default printer. There is
no print preview, except for a small box that contains the words "Show Print Preview." When I click on that the small box is replaced with the words "Print preview is not available." On the left hand side, where the printer is identified, there
is a green check mark on the printer icon and below this is the link that states "Printer Properties." If I click on Printer Properties the green check mark changes to a red X and the word Ready is replaced with "Unable to Connect."
Without changing anything, other than selecting a different sheet within the same workbook, I get very different results and they do not match your results. Again I do a File Print and again I click in the small box that says "Show Print Preview."
This time a preview appears with NO message box. However, if I customize the Quick Access Toolbar by adding the "Print Preview Full Screen" button and then click this button without first clicking on File, then the message box appears.
So, are you getting the message box by clicking on File > Print, or are you clicking on the "Print Preview Full Screen" quick access toolbar button?
Thanks.

DRQ: document date column vendor statement

Hello!
We request to implement to add "document date" column on "vendor statement" report.
Now, even if it is "checked" in settings and it is visible on "supplier liabilities ageing" (screenshot z1)
[z1|http://img130.imageshack.us/img130/2002/61227598.jpg]
It is not visible on reportsand printings ("supplier statement report") screenshot zel3
[zel3|http://img406.imageshack.us/img406/994/zel3.jpg]
This issue is detailed described (with screenshots) under SAP support
request nr 280783
I have created service request to SAP and i have received answer:
"There is note no. 1260740 which explains how to get the document date in the printout of aging report in the layout "Detailed Receivable Ageing Report".
Unfortunately, after checking this in the layout you asked called "statement report", I saw that it is not possible to see the document date there, and it is not possible to add this field in the layo ut as the report is hardcoded.
So the customer can see this field when using the layout "Detailed Receivable Ageing Report", but if it is very important for the customer to see the document date in the "statement report" layout, pl ease kindly refer to SAP Note No.1028874 regards Missing Functionality."

I sort of solved this problem myself.
Apparently, OPCH table (AP Invoice) was not available in the drop-down menu.
So, I selected the closest I can get: OJDT table (Journal Entry) and selected TaxDate - Document Date.
It works now.

SPGridView - sorting Dates doesn't work properly & how to display the title column as link?

Hi,
I've got a SPGridView that is being filled with data from several lists. Some of them are a date-field and a title-field. I already added sorting, paging and filtering options and at first look they seem to work fine. But now I noticed that sorting dates
doesn't work as expected. If I select ascending sorting, the result is something like this:
01.08.2014
02.08.2014
17.07.2014
18.07.2014
23.07.2014
If I select descending sorting, the result is this:
23.07.2014
18.07.2014
17.07.2014
02.08.2014
01.08.2014
This isn't what I want obviously.
I just added the EventReceiver for the sorting like it is shown in several tutorials:
(The date field is a BoundField.)
grid.Sorting += new GridViewSortEventHandler(grid_Sorting);
private void grid_Sorting(object sender, GridViewSortEventArgs e)
if (ViewState["FilterExpression"] != null)
gridDS.FilterExpression = (string)ViewState["FilterExpression"];
And my second problem is how to add a link to the title column. In my grid I'm displaying tasks from different lists and I want to link the title to the related task. I stumbled accross HyperLinkFields and tried this:
HyperLinkField hyperLinkField = new HyperLinkField();
hyperLinkField.DataTextField = "Titel";
hyperLinkField.DataNavigateUrlFields = new string[] { "Titel" };
hyperLinkField.DataNavigateUrlFormatString = "{0}";
hyperLinkField.HeaderText = "Titel";
hyperLinkField.SortExpression = "Titel";
grid.Columns.Add(hyperLinkField);
The resulting link is something like ...sites/MySite/_catalogs/masterpage/A1-V1-2 where "A1-V1-2" is the name of the task and also shown in the title field.
The actual link should look more like ...sites/MySite/Lists/mytasklistname/DispForm.aspx?ID=.... or something like that to display the task details. How could I achieve that?
Thanks in advance

http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_27718782.html
Here is the exact code you need to use:
http://social.msdn.microsoft.com/Forums/ar/sharepointcustomization/thread/c463a8c6-4806-4233-b6a4-8db8369c5fc2
http://sharepoint.stackexchange.com/questions/53459/change-title-linked-to-item-with-edit-menu-to-different-column
Open the AllItems.aspx page for the specific list.
Search for the <ViewFields> tag
List item LinkToItem="TRUE" to whichever column you want the link:
<ViewFields> 
<FieldRef Name="Attachments"/> 
<FieldRef Name="LinkTitle"/> 
<FieldRef Name="linkThisColumn" LinkToItem="TRUE"/> 
<FieldRef Name="data_x0020_column"/> 
<FieldRef Name="Another_x0020_column"/> 
</ViewFields> 
http://sharepoint.stackexchange.com/questions/58954/link-title-in-list-to-value-in-url-column
Create calculated column.
Insert following formula -
="<a href='"&UrlFieldName&"'>"&Title&"</a>"
Set "data type returned from this formula is" to integer.
As a result on list view you will see the title with link to your url.
UPD: It seems that URL field is not valid for calculated column, as workaround you can copy url value in a receiver into the another text field, which is not shown on the view.
If this helped you resolve your issue, please mark it Answered

WP8.1 MDM Restrictions - Voice record and safe search not working as expected

Hi
I'm having some issues with the new restrictions -
Voice recording
After setting Experience/AllowVoiceRecording to 0, voice recording no longer works as expected in the Nokia recorder app, however you can still voice record from other apps such as One note. Is this expected or should this restriction be applied at
OS level?
Safe search level
Setting Search/SafeSearchPermissions to 0 or 1 causes the UI in settings > search for the level to be greyed out and states that it is disabled - but it does not show the correct level set. It seems this restriction is not working or the values
I am using are incorrect.
Thanks
Scott

Hi Scott,
I was checking the documentation and it seems vague. However, I have a few thoughts...
Are you running this as PolicyManager/My/<Area>/<policy name> or PolicyManager/Device/<Area>/<policy name>? In Windows Phone 8.1, the PolicyManager configuration service provider is new. "My" path handles the policy configuration
request coming from the server and "Device" is a read only path to reflect the plicy values that are enforced at the device.
I would check to insure that you've set it up in the correct area. To troubleshoot, you could also try setting it up in either the opposite area and/or both areas.
I hope this helps!
David

ServiceDesk software not working as expected with new Firefox version

After recently upgrading to Firefox 5.0, I have discovered that the ServiceDesk software I use with Firefox no longer works as expected. This software is ManageEngine ServiceDesk Plus 8.0. The problem is irratic but unique to Firefox. I don't have this problem with Chrome or IE.
The problem is this: When I open an issue, several fields become active, one of which is the description field where the user who sent the issue typed the description of their problem. When editing the issue and the active fields become active, sometimes this description field is completely blank, meaning their description is gone, but not really. I have to close the page and try to re-open hoping this time, the description will be shown. Also, there is a tab for me to enter a resolution when I want to close it. I cannot enter anything in this field, or rather I can, but when I save it, nothing gets saved to this field, so the user doesn't get to see my resolution. The default font for ServiceDesk is Arial, but I know something is amiss because the default font is Times. If the font shows as Arial, then I know everything will be okay.

I knew I would figure this out as soon as I posted it...
This is the behavior you see if the SamAccountName field is not included.

System Variable No. for AP Invoice Document Date

Hi,
I have an Outgoing Payment PLD. 2 fields was empty after the upgrade from 2007A to 8.8.
AP Invoice's Document Date and Customer/Vendor Reference No.
For AP Invoice's Document Date, I have tried the database field (Table: A/P Invoice, Column: Document Date) but it didn't work. Came out empty.
Initially, the database field for Customer/Vendor Reference No. came out empty as well but i used system variable 201 which worked.
I was just wondering if there is a system variable for AP Invoice Document Date as well? Or is there another way so that I can show the AP Invoice Document Date in the Outgoing Payment PLD?

I sort of solved this problem myself.
Apparently, OPCH table (AP Invoice) was not available in the drop-down menu.
So, I selected the closest I can get: OJDT table (Journal Entry) and selected TaxDate - Document Date.
It works now.

"Documents & Data" no longer working as expected

Similar Messages

Maybe you are looking for